ADDN/ALTN TO BLDG NO. T 194 OF F CIVIL, ET 201 OF INI , IAS 3 OF SEMT WING , SERVANT QTRS FLATS (BLDG NO.116/F 1 AND 2) AND PROVISION OF NAME BOARDS FOR OFFRS MAP QTRS AT CME, PUNE

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings all as directed.

S & F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

S & F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S & F Rolled Mild Steel sections confirming to Fe 410 - W as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats or other connecting plates all as specified and directed.

S & F framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders,framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc. complete all as specified and directed.

M & L for preparation of steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc. complete all as specified and directed.

M&L for prepartion on old painted surfaces of steel and iron surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp,insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. complete all as specified and directed.

S&F For anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling complete all as specified and directed.

S&F For hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F For 12 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws etc. complete all as specified and directed.

S&F in replacement fixed type partly panelled & partly glazed partition using 25 x 37.50 mm (DP) aluminium section No.20034 in frame and section No.19361 and 19352 in panels including 4mm thick plain glass & 12mm thick prelaminated particle board with decorative choice lamination on both sides fixed with aluminium cleats etc complete all as specified and directed.

S&F in replacement partly panelled & partly glazed door single/double, leaf, using aluminium section Top - 19528, Middle - 19575, Bottom - 19530, Vertical - 19526 fixed with aluminium floor door spring, pivot etc., with particle board panels of 12mm thick prelaminated particle board with decorative choice lamination & 5mm thick plain glass having interlock (20939), Handle (20602) complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons, laid bedded and pointed in any mortar etc. complete all as specified and directed.

M & L For machine cut kota stone slab flooring 20-25mm thick laid over and including cement screed bed or bedding layer 15 mm thick , in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed.

M & L For kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick backing coat in CM 1:3 and jointed and pointed in grey cement with admixture with match shade of floor finish etc. complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in any mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as directed.

M& L PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar1:6 etc. complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even & smooth w/o using extra cement all as specified and directed.

M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:3, finished even & smooth w/o using extra cement all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion all as specified and directed.

M& L 3mm thick wall care putty on wall surface etc. complete all as specified and directed.

M&L for newly plastered surface of wall and applying two coat of exterior emulsion over a coat of primer after preparation of surfaces of any height including necessary scaffolding etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2, using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor/ wall finishes in CM 1:4. all as specified and directed.

M&L for rendering 10 mm thick on other than fair faces of brick work or other side of lathing in cement mortar 1:3, as in backing coat etc. all as specified and directed.

S & F virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and directed.

Providing & fixing Aromstrong mineral fibre Acoustical suspended ceiling system with fine fissured , resistance ( RH ) of 99%, NRC 0.6, Light reflectance > 85%. Thermal conductivity K = 0.052 - 0.057, W/M K, colour white, fibre performance UK class 0/ class 1 ( BS476 PT - 6& 7) IN MOUDLE SIZE 600 X 600 X 16 mm suitable for green building application with recycled content of 31%. The tile shall laid on Armstrong superfine 32 with 15 mm wide T - section flanges colour white having rotary stitiching on all T sections i. e. the main runner, 1200 mm x 600 mm/ cross Tees with web height of 32 mm and a load carrying capacity of 7.5 / m2 & minimum pull out strength of 100 kgs. The T sections have a galvanzing of 90 grams per Sqm and need to be installed with suspen sion system of Armstrong make including 40 mm x 3mm flat GI mild steel strip suspender made to shape at 1200 mm c/c fixed with 3 mm dia. GI wire and making holes etc. complete all as specified and as directed.

M&L glazed earthen ware coloured tiles 350x250 x7 mm / 450 x 350 x 7 mm thick& border on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering cement mortar 1:4. etc. complete all as specified and as directed.

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for

M&L Cement concrete type B2 1:2:4 using 40 mm graded stone aggragate as in foundations of installations/ equipments and RCC posts/ struts all as specified and directed.

M&L for form work to sides of flat, rough finished surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical to batter all as specified and directed.

M & L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width type E1 1:5:10 using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) with water proofing compound finished surface even and smooth without using extra cement

Supply only integral water proofing compound.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls/ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:4) on fair faces of stone masonry and finishing the surfaces even and smooth without using extra cement including 10 mm thick dubbing coat in CM 1: 4 etc.complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on concrete or brick masonry surface (finished surface even and smooth without using extra cement all as specified and directed.

M&L for preparing newely plastered surface of wall and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper white or tinted on walls over 3 mm thk wall care putty all as specified and directed.

M & L for complete removal of existing treatment of wall priming with alkali resistant primer and applying two coat of oil bound distemper over 3 mm thick wall care putty all as specified and directed.

S&f 18 mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.

M&L Brass handles, cast type, polished bright of 75 mm

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm all as specified and directed.

S & F vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 32 mm boreLow density polyethylene (LDPE) pipes of pressure rating 6kgf/sq. cm all as specified and directed.

Supply only Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

Supplying and laying of outer dia 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

M & L for preparation of old plastered or unplastered surface of ceiling and applying two coat of white wash complete all as specified and directed by Engr-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.

S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old steel surface and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, socket or power), complete, (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor to match with existing surface etc.

M&L for point wiring for ligh/fan with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.00 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch in and includinding taking old unserviceable point wiring. & Making good to disturbed surface of wall etc

One light point controlled by one switch 5 Amp

One Exhaust fan point controlled by one switch

Socket outlet, three pin, 5 Amp, independent

Socket outlet, three pin 5 Amps on the same board

All as per Item No.57 above, but ,with stranded copper conductor 2.5 Sq. mm (nominal area), including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

S & F ceiling rose, surface Bakelite suitable for 3 pin 230 volt 50 Hz AC supply complete all as specified

S & F switch piano, flush type, single pole, one way, and 5 Amp, 230 volt complete all as specified.

S & F switch piano, flush type, single pole, one way, and 15 Amp, 230 volt complete all as specified.

S & F socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified.

S & F socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified.

Taking down ceiling/Exhaust Fans any type/sweep 230 V AC and refixing after cleaning and making connection complete all as specified.

S&F surface and wall mounted LED batten (LED tube light fitting 20W) with polycarbonate housing & integrated electronic driver alongwith LED tube 20 watt and 02 No PVC square blocks incl taking down old UNSV fitting. Make:- Havells cat No LUMILINEBS20WLED830SPCWH or equivalent of Philips/Bajaj

S&F in replacement LED panel 2 feet x 2 feet size 36 wattt glare free symmetrical including driver and taking down old UNSV one complete all as specified and directed. Make:- Havells cat No ENDURASLIMPROPLUS2X2PLR28/36WLED840MOD or equivalent of Philips/Bajaj

Supply and fix heavy duty exhaust fan AC single phase 230/ 240 volts heavy duty of size 300 mm sweep, 1400 rpm, with louvers and all fixing arrangements such as plywood 18mm thick of suitable size complete all as specified and directed.

Supply and fixing wall mounting fan (air circulator) single phase oscillating type 450mm sweep 230 volts complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

S&F Sub main wiring with approved colour coding as per IS with Two single core PVC insulated cable with stranded copper conductor of size 06 Sq. mm nominal area and drawing into PVC conduit including PVC insulated 6 Sqmm (nominal area) stranded copper conductor earth wire complete. NOTE : Two runs of 6 sqmm cable, one run of 6 sqmm earth cable and one run of PVC conduit will be measured as one unit

Supply & fix DB 8 way SPN with 200 amps rated bus bar, double door including wooden box suitable size. Make - Indoasian /Schneider/Siemens

Supply and fixing of MCB Single pole rated capacity 5 to 32 A, 240 V breaking capacity 10 KA C series. Make - Indoasian /Schneider/Siemens

Supply and fixing of MCB Single pole and neutral rating capacity 40 to 63 Amp, 240 V breaking capacity 9KA C series. Make - Indoasian /Schneider/Siemens

M & L for Earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No.3 of SSR-2009 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc.

Supply & fixing LED luminaires panel lighting size 2'x2' capacity 36 Watt, Urtra modern disigned architectural LED Luminaire which provides soft-light and glare symmetrical illumination suitable for grid ceiling and including taking down old one all as specified & directed by Engr-in-Charge. Make- Havells Cat Part No VENUSNEOHE2X2PLR36WLED8XXS or equivalent make

S & F MCB SP 6 to 32 Amps, 230 V AC complete all as specified and directed.

M & L for precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type 1:3:6 (using 20mm graded stone aggregate) set in cement mortar 1:6 etc. complete all as specified and directed.

Excavation in post holes each in exc. 0.50cum getting out in hard/dense soil, returning filling in and ramming earth in layers not exc. 25cm watering & removing surplus soil to a distance n. exc. 50m & making good surface all as directed.

S & F rolled mild steel framed work as in doors or gates of angle or grill or other section conforming to Fe 410-W (Gde-E-250) quality-A with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

S & F1.25 mm thick, mild steel, plain black sheet as in name board and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to steel framing with 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc. complete all as specified and directed.

Dismantling single layer mangalore pattern or similar tiles in roofing including ridge tiles etc. complete all as directed.

Dismantling battens exc. 15cm for tiles, shingles etc. of any size including tilting fillets all as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position etc complete as directed.

Dismantling boarding, any description, fixed in any position with nails etc complete all as directed.

Sunrise Traders

S.K.HARAL

GGS Infra

Aakar Construction

Mukund Engineers and Contractors