REPARATION TO VARIOUS ARTICLES OF STEEL FURNITURE INCLUDING POLISHING PAINTING UNDER GE WEST DELHI CANTT 10

Amount

TEAPOY VERANDHA: FD-35(M) / 208 / 255 / 383: S&F following components of Teapoy Verandah including dismantling taking out carefully & replace old components of Teapoy Verandah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 22

Replacement of old existing broken table top of any description with S&F new table top of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

S & F new 25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position as shown in drg.

S & F new 25mmx3mm flat iron on top of legs of length 250mm welded to existing flat iron at top placed in position as shown in drg.

Replacement of legs of table with S & F new legs.

Replacement of rubber shoe with S & F new hard rubber shoe of superior quality.

Welding work wherever required as directed by EIC and GE.

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Teapoy Verandah, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

STEEL TABLE OFFICERS (FD-84(M) / 1002 / 1003) & STEEL TABLE CLERK (FD-84(M) / 381 / 1004): S & F following components of table officers/clerk including dismantling taking out carefully & replace old components of table officers/clerk. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 50 (Officers - 15 & Clerk - 35)

Replacement of old existing broken officers table top of any description with S&F new table top of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

All as per item 2.01 here in but top of table clerk.

Replacement of drawer with S&F new table drawer made to shape, fixed in position all as shown on drg, specified and directed with Locking arrangement i.e. Key holes etc.

Dismantling, taking out carefully old existing broken U/S Locks of any description & replacement of the same with S&F new Locks with double key fix with suitable 4mm dia screws complete machine all as shown on drg specified and directed. (Make :- Godraj/ Harrison/ Nova)

Leg (New leg must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg)

Stiffener (New stiffener must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg)

Replacement of standard PVC Handle with S&F new PVC handle.

Welding work wherever required as directed by EIC

Replacement of rubber shoe with S&F new hard rubber shoe of superior quality.

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table officers, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table clerk, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

STEEL LOCKER: FD-257 / 1029, CEDZ-D-ARC-27: S & F following components of locker Steel including dismantling taking out carefully & replace old components of locker steel. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 250

Replacement of Handle with S&F new handle shall be of non-ferrous alloy with CP Godraj patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE.

Replacement of legs with S&F new legs complete all as shown on drg, specified and directed.

Replacement of shelf with S & F New shelf complete all as shown on drg, specified and directed .

Replacement with S&F new SS conduit pipe 20 mm dia for locker steel or sorts complete all as shown on drg, specified and directed .

Chromium plated safety type hasp & staples

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size)

Replacement of hinges of steel locker with S&F new hinges SS (Make :- Hettich/ Ozone/ Epco)

Welding work wherever required as directed by EIC

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the locker steel, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

STEEL ALMIRAH LARGE : FD-67(M) / 351 / 1031: S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 100

Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed. (Make:- Godraj/ Harrison/ Nova)

Replacement of Handle with S&F new handle shall be of non-ferrous alloy with CP Godrej patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE.

Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah large.

Replacement of legs of steel almirah large with S&F new legs complete all as shown on drg, specified and directed.

Replacement of shelf of steel almirah large with S&F new shelf complete all as shown on drg, specified and directed .

Replacement of door shutter of steel almirah large with S&F new door shutter complete all as shown on drg, specified and directed .

Replacement of hinges of steel almirah large with S&F new hinges SS (Make :- Hettich/ Ozone/ Epco) complete all as shown on drg, specified and directed.

Welding work wherever required as directed by EIC

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Almirah, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

CHAIR CBT STEEL WITH ARMS : FD-75 (M) / 386: S&F following components of chair CBT steel with arms/without arms including dismantling taking out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 800

Dismantling, taking out carefully old existing seat of any description & replacement of the same with S&F new seat made out of 12 mm thick Plywood Commercial Quality ISI mark covered with 75mm thick PU form and best quality tapestry cloth of rate ranging Rs 200-250/- as well seat should be fixed through 02 Nos MS stiffner size 25mmx4mm(duly two coat of black enamel paint over a coat of red oxide primer) & suitable Nut/BoltScrews completed all as shown on drg, specified & directed by the Engr-in- Charge. (Make of Ply :- Greenply, Model :- Green, Century, Model:- Maxima, Duro, Model :- Duromac).

Dismantling, taking out carefully old existing back of any description & replacement of the same with S&F new back made out of 12 mm thick Plywood Commercial Quality ISI mark covered with 75mm thick PU form and best quality tapestry cloth of rate ranging Rs 200-250/- as well back should be fixed through 02 Nos MS stiffner size 25mmx4mm(duly two coat of black enamel paint over a coat of red oxide primer) & suitable Nut/BoltScrews completed all as shown on drg, specified & directed by the Engr-in- Charge. (Make of Ply :- Greenply, Model :- Green, Century, Model:- Maxima, Duro, Model :- Duromac).

Replacement of Arms rest with S&F new Arms rest made out of black integral skin polyurethne reinforced with MS insert and shall be scratch and weather resistance of chair briefing static baised all as shown on drgs specified & directed by the Engr-in- Charge.

Replacement of shoe/Cap with steel screws where required with S&F new rubber pads of superior quality with suitable Steel Screws complete all as shown on drgs specified & directed by the Engr-in- Charge.

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the chair CBT steel with arms/without arms, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

CHAIR REVOLVING/TILTING WITH ARMS STEEL: FD-75(M) : S & F following components of chair including dismantling taking out carefully & replace old components of Chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 20

Taking out U/S seat and S&F new seat with 12mm thick ply wood BWR (Make of BWR ply:- Greenply, Model :- Green / Make :-Century, Model:- Maxima / Make:- Duro, Model :- Duromac made to shape for seat, upholstered with Fabric of approved colour and moulded polyurethane foam (Make: Sleepwell/ Springwell/Kurl-on) with PVC lipping all around.

Taking out U/S back and S&F new back with 12 mm thick ply wood BWR (Make of BWR Ply :- Greenply, Model :- Green / Make :-Century, Model:- Maxima / Make:- Duro, Model :- Duromac made to shape of back, upholstered with Fabric of approved colour and moulded polyurethane foam (Make: Sleepwell/ Springwell/ Kurl-on) with PVC lipping all around

Taking out U/S hand rest and S&F new hand rest of black integral skin polyurethane reinforced with MS insert complete

Taking out U/S base and S&F new SS 5 star base fitted with twin wheel castors.

S & F of Hydraulic system of suitable size and design as per original Pattern of different Make and Model including dismantling of old U/S one for Chair Revolving / Chair Computer / Chair Revolving High or Medium of different Make and Model complete all as specified and directed.

TABLE (900X600X760) WITHOUT DRAWERS : FD-1007: S & F following components of Table including dismantling taking out carefully & replace old components of Table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 152

Replacement of old existing broken top of table of any description with S&F new table top of size 900mmx600mm made out of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Shoes all as per drg.

Welding work wherever required as directed by EIC.

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Table 3'x 2' without Drawers paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian / Berger / Nerolac).

STEEL ALMIRAH MED : FD-243: S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 150

Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah Steel Med & suitable 4mm dia screws complete machine all as shown on drg specified and directed. (Make :- Godraj/ Harrison/ Nova)

Replacement of Handle with S&F new handle shall be of non-ferrous alloy with CP Godrej patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE.

Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah medium.

Replacement of legs of steel almirah medium with S&F new legs complete all as shown on drg, specified and directed.

Replacement of shelf of steel almirah medium with S&F new shelf complete all as shown on drg, specified and directed .

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size)

Cleats (New cleats must be made of 2mm thick MS sheet)

Welding work wherever required as directed by EIC

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Steel Almirah Med, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

CHARPOY FOLDING IP NYLON NIWAR/PLY TOP : FD-388(R) S & F following components of Charpoy including dismantling taking out carefully & replace old components of Charpoy. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 200

Removing the U/S nylon niwar from the charpoy folding IP and S & F new 12mm commercial ply BWR grade ISI marked placed in position after providing four equidistant 25mm dia conduit pipe stiffeners duly welded to main frame for the support of plywood by necessary drilling and duly tightening with nut and bolts as shown in drg. Make :- Greenply, Model :- Green / Make :-Century, Model:- Maxima / Make:- Duro, Model :- Duromac / Make:- Archid

Removing the U/S Plywood from the charpoy folding IP and S & F new 12 mm thick plywood top BWR grade ISI marked by necessary drilling and duly tightening with nut and bolts. Rest all as per drg and as directed by Engr-in-Charge and GE. Make :- Greenply, Model :- Green / Make :-Century, Model:- Maxima / Make:- Duro, Model :- Duromac / Make:- Archid

Removing the U/S flat iron stay and S & F new 25mmx 6mm flat iron stay as shown in drg.

Replacement of U/S PVC shoes with best quality PVC shoes of dia 25mm and height 30mm shall be provided to legs of charpoy. complete all per drg, specified and as directed.

Welding work wherever required as directed by EIC and GE.

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Charpoy Folding IP Nylon Niwar/ Ply Top paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

CHAIR VERANDAH WITH NYLON CANNING:- FD-19(M) / 359: S & F following components of Chair Verandah including dismantling taking out carefully & replace old components of Chair Verandah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 675

Removing the existing U/S cane/niwar plastic from the seat and back of chair and recanning the seat and back of chair with plastic cane 3.5mm to 4mm wide of 1st quality, white colour in pure godrej pattern. The canning of chairs shall only be carried out after complete painting process as specified in drg. MAKE OF CANE - SHAH, PREMIER

Replacement of legs of chair varandah with S&F new legs made out of 16 Gauge MS sheet complete all as shown on drg, specified and directed.

Welding work wherever required as directed by EIC

Removing the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair.

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair Varandah paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

Deduct Credit: for demolished/dismantled material of (-) Rs 18944.00(Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

UNIQUE FYRNITURE

Anil Kumar

M/S SUNIL TRADERS

M/s Makhan Lal

M/s M M BAHL