GE/SRA/T-33/2023-24

Amount

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., removal of debris outside AF land complete all as specified and as directed.

M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

Taking down cement plaster on wall of any description hacking for key scrubbing down with water including racking out joints and removal of debris outside AF land and disposed off complete all as specified and as directed..

M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".

Supply only Liquid water proofing compound, conforming to IS and/or as approved, complete all as specified.

M&L for preparing new Plastered Surfaces of Walls, etc and applying Two or more coats of Weatherproof Exterior Emulsion paint of required shade (in Camouflage pattern) over and including priming coat of suitable exterior primer complete all as specified and as directed.

Supply and fixing in repairs galvanized 2 strand steel barbed wire fencing conforming to IS : 278, with 2.24 mm dia. barb wire conforming to IS : 280 with zinc coating as per IS : 4826, barbed with 2 mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails/RCC fencing posts straining bolts, including securing or tying at crossing with and fixing of galvanized mild steel wire, staples or steel pins etc., incl dismantling of existing barbed wires complete all as specified and directed. (Note: - Each line of wire will be measured)

Restraining, re-securing and making good existing galvanised steel barbed wire, 2 strand, of any description over boundary wall, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for complete removal of existing treatment on walls. etc and applying and applying Two or more coats of Weatherproof Exterior Emulsion paint of required shade (in Camouflage pattern) over and including priming coat of suitable exterior primer complete all as specified and as directed. NOTE : Rates quoted by the tenderer shall be deemed to include for the following applications as under:- (a) Surfaces shall be cleaned properly to remove loose dirt or dust, lichen, algae, fungi or any organic growth by use of stiff brush, washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris. (c) All safety measures for the safety of workers shall be ensured by contractor before execution of work. Deptt shall not be liable for any untoward incident. (d) Quoted rate shall be deemed to include cost of necessary scaffolding as required for a height of building not exceeding 3.5mtr (Approx). (e) Contractor shall bring the required quantity of material in two lots in sealed containers after approval of Make/sample and keep in MES store under custody of JE/Engr-in-charge.

M&L for preparing old decorated/painted steel angle/surfaces of any description over boundary wall by applying two coats of synthetic enamel paint (first quality) complete all as specified and as directed. NOTE : Rates quoted by the tenderer shall be deemed to include for the following applications as under:- (a) Scope of work consists of painting to angle iron sections over boundary wall fixed as support of barbed wire and concertina coil and the work needs to be carried out between the existing barbed wire and concertinal coil. Contractor shall quote his rate considering the above aspect and no claim shall be admissible at a later stage. (b) The surfaces shall be cleaned to remove loose dirt or dust, lichen, algae, fungi or any organic growth, loose paoint, rust by use of stiff brush, washed well and allow water to dry before painting. (c) All safety measures for the safety of workers shall be ensured by contractor before execution of work. Deptt shall not be liable for any untoward incident. (d) The quoted rate shall deem to include the cost of necessary scaffolding and form works as required for a height of not less than 3.5mtr (Approx).

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.

Dismantling mild steel steel work of any description not otherwise provided for, complete all as specified.

Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position complete all as specified and as directed

M&L for Rolled mild steel sections as in framing for ladding, glazing and the like fixed with angle cleats and connecting plates, etc, complete all as specified and as directed..

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

M & L for preparing new or previously untreated steel surfaces of any description by applying two coat of synthetic enamal paint (first quality) over a coat of red oxide zinc chrome primer complete all as specified and as directed.

BHATIA ENTERPRISES

NISHTHA BUILDERS

shiv shanker enterprises

M/s Satguru Traders

YOGINDER KUMAR GUPTA AND COMPANY

DCM ENTERPRISES

KARAM CHAND KRISHAN LAL