Providing and Installing Electrical Work

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable of L&T/ Anchor/ Legrend make in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect as per the entire satisfaction of Engineer incharge.

Group A.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable of L&T/ Anchor/ Legrend make in surface/recessed PVC conduit with 2-way, 5/6 amps. piano type switch and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect as per the entire satisfaction of Engineer incharge.

Group A.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Supplying and fixing Computer board, comprising 3Nos. of 5 amp. switches and 3 nos 5 amp socket and one no metal box 200 X 250 X 100 mm deep , 1 No metal box size 100x100x60mm deep ,1 No phenolic laminated sheet size 200x250mm (i.e of size 8"x10")one No phenolic laminated sheet size 100 x100mm (i.e 5"x5") 3 mm thick and 1 No computer Jack with shutter including connections etc as required complete in all respect as per the entire satisfaction of Engineer incharge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable of Anchor/Havells/L&T make in surface/recessed steel conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respect as per the entire satisfaction of Engineer incharge.

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x10 Sq. mm.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable of Anchor/Havells/L&T make in surface/recessed steel/PVC conduit along with 1 No. 4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect as per the entire satisfaction of Engineer incharge.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable of Anchor/Havells/L&T make in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect as per the entire satisfaction of Engineer incharge.

Wiring for circuit/sub-main with 4x2.5 sq. mm PVC insulated heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable of Anchor/Havells/L&T make in existing surface / recessed, Steel/PVC conduit alongwith 2 No. 2.5 sq. mm (4x2.5+2x2.5) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

4x2.5 Sq. mm.

Supplying and fixing of following size of PVC conduit of approved make alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required complete in all respect as per the entire satisfaction of Engineer incharge.

25 mm. dia

Supplyin and fixing LAN cable Cat 6 Havells/ D-Link make,solid copper conductor protected with PVC Sheathed in Existing surface/recessed ,steel /PVC Conduit as required complete in all respect as per the entire satisfaction of Engineer incharge.

Supplying and fixing LED. Lamp 5 watts E-27 Cat. No. LHLDERHEMD8X005 of Jaquar/Philips/Havells make make in the existing batten holder as required complete in all respect as per the entire satisfaction of Engineer incharge.

LED 5 WATT Retrofit

Supplying and fixing bakelite batten/angle holder including connections etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Providing, Installation, testing and commissioning of Jaquar/Philips/Havells make Glazed LED 22 Watt Batten Cat. No. 1595 22 W LED T-5 TL High quality design aluminum extruded decorative end caps or its equivalent complete in all respect as per the entire satisfaction of Engineer incharge.

Supplying and fixing Surface mounting Bema LED down lighters (Square) polycarbonate diffuser (chrome finish frame) 16 watts of Jaquar/Philips/Havells make Cat. No.7325 complete with connections etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Supplying and fixing Bulk head fittiing 7 watt LED of Jaquar/Philips/Havells make complete with testing and commissioning etc as required complete in all respect as per the entire satisfaction of Engineer incharge.

Providing, Installation, testing and commissioning of ceiling fan with regulator of Bajaj/Crompton/Havells make, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as requiredcomplete in all respect as per the entire satisfaction of Engineer incharge.

Ceiling Fan 1200 mm sweep, Havells make Category-A

Ceiling Fan 1400 mm sweep,Havells make Category-A

Supplying and fixing Ding-Dong / Electronic musical bell of approved make, suitable for D.C./A.C. single phase,230 volts complete as required complete in all respect as per the entire satisfaction of Engineer incharge.

Supplying and fixing of Exhaust fan (Plastic) with Louver shutter 300mm 1000RPM `1125 Air Delivery (CMM) Bajaj/Crompto/Havells make complete with connections etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Providing, Installation, testing and commissioning of mirror light LED 10 Watt TL Cat. No. 1597 of Jaquar/Philips/Havells make Modern surface mounting Luminaire two traditional down light solutioin the fixiture and the driver are designe to provide value technology idealy suited to Indian condition or its equivalent complete in all respect as per the entire satisfaction of Engineer incharge.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of L&T/Havells/Legrend make of following poles in the existing MCB DB complete with connections etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Single pole. Cat-A.

Supplying and fixing of following way SEGREGATES, triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface/recess, with provision to mount 8 module incomer, 4 module sub-incomer in each phase and SP MCBs as outgoing complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Double door-12 way (8+12+36), 7-segment

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required as required complete in all respect as per the entire satisfaction of Engineer incharge.

Double pole. Cat-A

Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

63 Amps. Cat-A

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

100 Amp. Category-A

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Providing and fixing following rating, four pole, 415 volts, on-Load change over switch unit, panel mounting, front handle operation, including drilling holes in the cubical, making connections, etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

100 Amp. -16 KA

Supplying and erection of following depth sheet metal cubical pedestal confining to IS 64139 & tested/approved from CPRI lab of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form complete in all respect as per the entire satisfaction of Engineer incharge.

300 mm deep (nominal)

Supplying and fixing of indicator set RY&B with 3 Nos Kit kat (LED type) to shown the three indicating in the existing pannel complete etc as required complete in all respect as per the entire satisfaction of Engineer incharge.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required complete in all respect as per the entire satisfaction of Engineer incharge.

Extra for using salt and charcoal for copper plate earth electrode complete as required complete in all respect as per the entire satisfaction of Engineer incharge.

Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing as required complete in all respect as per the entire satisfaction of Engineer incharge.

Providing and fixing 25mm x 5mm copper strip in 40 mm dia. G.I. pipe from earth electrode etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable of KEI/Havells make, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size complete in all respect as per the entire satisfaction of Engineer incharge.

Armoured cable 35 sq. mm (3.5 core)

Supplying and fixing of Shock treatment chart on the existing wall etc as required complete in all respect as per the entire satisfaction of Engineer incharge.

Supplying and erection of 3 stepped steel tubler swaged and welded pole of suitable length and dia to be fixed upto required planting depth below g/l in a hole of excavation upto30cm dia and of suitable depth to be filled in upto 15cm below g/l with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete upto a height of 45cm from g/l the radial thickness of the plinth above g/l should not be less than 6.3cm and sufficient to complete flush a 180mmx100mmx45mm deep glass filled nylon fr hrade box for housing a 16amp mcb the outer surface of the plinth to be finished with a 1:3 cement plaster 6mm thick the fuse box shall have a water tight cover. including painrting of pole with two coats of approved colour brand and manufacture of paint over a primimng coat complet in all respect as required complete in all respect as per the entire satisfaction of Engineer incharge.

Overall length 7.0mtr with planting depth 1.25mtr length of section 4.0mtr, 1.5mtr and 1.5mtr bottom middle and top respectablly outer dia and thickness of section 127mmx4.5mm, 101.6mmx3.65mm and 76.1mmx3.25mm bottom middle and top respectably with approxi weight 74kg complete in all respect as per the entire satisfaction of Engineer incharge.

Supplying and fixing of street light LED 60Watts of approved make complete in all respect as per the entire satisfaction of Engineer incharge.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable of KEI/Havells make, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size complete in all respect as per the entire satisfaction of Engineer incharge.

Armoured cable 6 sq. mm (twin core)

Supplying and laying H.D.P.E.PE-80 PVC pipe 32mm dia Pressure dia in ground 1.00 Mtr. Below ground level for laying the wires/cable etc. as required complete in all respect as per the entire satisfaction of Engineer incharge.

Supplying and fixing of rubber mat 1x2 meter long 12mm thick in front of main panel ISI marked as required complete in all respect as per the entire satisfaction of Engineer incharge.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable of L&T/ Anchor/ Legrend make and with earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect as per the entire satisfaction of Engineer incharge.(without surface/recessed conduit work in the ceiling area )

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable of L&T/ Anchor/ Legrend make and with 2-way, 5/6 amps. piano type switch and with earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect as per the entire satisfaction of Engineer incharge.(without surface/recessed conduit work in the ceiling area)

Thakur Traders

Sharma and Company