Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹24.1 L+₹2.2 L (10.3%)Rejected-Finance HATIA ROAD DANGALPARA DISTT DUMKA JHARKHAND PIN 814101 | DUMKA | DUMKA | JHARKHAND | 814101 | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹25.1 L+₹3.2 L (14.8%)Rejected-Finance | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹25.7 L+₹3.9 L (17.8%)Rejected-Finance | L4 | Rejected-Finance HIGH RATE | |
| 5 | L5₹26.1 L+₹4.2 L (19.4%)Rejected-Finance | L5 | Rejected-Finance HIGH RATE |
Tender Value
₹34.1 L
EMD Value
₹68,200
Closing Date
12 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AJIT KUMAR DWIVEDI
AGE I AF SINGARSI
Misc BR and EM Repair works alongwith periodical services for KV School at AF Stn Singarsi
2022_MES_558302_2
C/8578/E8
Open Tender
Civil Works
Item Rate
180 days
AGE I AF SINGARSI
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Yes
AGE I AF SINGARSI
₹68,200
Yes
18 Nov 2022
4 Nov 2022
14 Nov 2022
4 Nov 2022
12 Nov 2022
5 Nov 2022
Amount
Demolition of cement concrete reinforced above ground floor exceeding 15 cm thick including removal, complete all as specified and as directed.
Demolition of cement concrete reinforced (reinforcement ) in above ground floor and pavings not exceeding 15 cm thick, including removal complete all as specified and as directed.
Demolition of brick work or stone/boulder masonery, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for etc, complete all as specified and as directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc for rough finished flat surface complete all as specified and as directed.
M&L for use and waste of Formwork in rough finished surface to sides of pillars, posts, struts, piers, columns and stanchions in rough finished in square , rectangular or polygonal of concrete surface etc, complete all as specified and as directed.
M&L for Formwork in rough finish surface to chullah hoods chajjas,fins, louvers, fascia, troughts and similer items including edges rough finished flat surface of concrete complete all as specified and as directed.
M&L for use and waste of Formwork in rough finished in flat surface to soffits of suspended slabs such as for wash basin landings, shelves and similar work; not exceeding 200mm thick in rough finish of concrete surface etc, complete all as specified and as directed.
M&L for Formwork in rough finish surface to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide in rough finished flat concrete surface, complete all as specified and as directed.
M&L for Reinforced cement concrete 1:2:4 nominal mix (using 12.5mm graded stone aggregate) in Beams, cantillevers, bressumers, lintels etc complete all as specified and as directed.
M&L for Reinforced cement concrete 1:2:4 nominal mix (using 12.5mm graded stone aggregate) in Columns, pillars, piers, posts etc, complete all as specified and as directed.
M&L for Reinforced cement concrete 1:2:4 nominal mix (using 12.5mm graded stone aggregate) in Fins, fascias, louvres, parapets, Chajja etc complete all as specified and as directed.
M&L for R.C.C 1:2:4 (using 20mm graded aggregate) for Slabs supported on walls, for wash basin shelves deck slabs and in shelves etc all as specified and as directed.
M&L for PCC 1:3:6 (using 20mm graded stone aggregate) as in copping roof kerbs or mud stops, rounded orchamfered on edges, complete all as specified and as directed.
M&L for PCC 1:2:4 (using 20mm graded stone aggregate) as in cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
M&L for PCC 1:3:6 (using 40mm graded aggregates) in mass concrete, Steps as in lean concrete etc, complete all as specified and as directed.
M&L for cement concrete 1:4:8 (using 40mm granded brick aggregates) as in sunken portion of WC etc, complete all as specified and as directed
M&L for P.C.C 1:2:4 (using 12.5 mm graded aggregate) 25 mm thick in floor and finishing cement concrete surface even and smooth for patch work in room, steps etc, complete all speccified and as directed.
M&L for Cutting holes of brick wall exc.half brick thickness but not exc one brick thick build in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 (using 20 mm graded aggregate) complete all speccified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all speccified and as directed.
Ditto,as per item no. 20 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
M&L for brick work with moduler size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 etc complete all as specified and as directed.
M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM 1:4 etc, complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key,scrubbing down with water and removing unserviceable material outside cantt area complete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 15 mm thick other than fair faces of brick work or concrete surfaces in cement mortal (1.6) for internal brick surface (Including all necessary scaffolding lifiting arrangement ) all as specified and directed by Engineer-in-Charge.
M&L for Rendering 15mm thick in CM 1:4 on fair faces of brick surface finished all as specified. (Including all necessary scaffolding lifiting arrangement for external surfaces) complete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 10mm thick in CM 1:3 on fair faces of concrete surface of ceiling, complete all as specified and directed by Engineer-in-Charge.
S&F of chicken wire mesh hexagonal type wire diameter 1 to 1.5 mm spaced at 6 mm to 12 mm from centre to centre etc holding plaster and concrete work, complete all as secified and as directed.
Taking down old unserviceable shutters of any description exc 1 but n.exe 2.00 Sqm each and removing materials from the site of work, complete all speccified and as directed.
Supply and fix Plain framed, panelled shutter 35 mm thick (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated fitted to chowkats or frames complete all as specified and directed.
M&L for Shutters of any description exc 2 sqm each resecuring or easing and adjust in same opening with taking down complete all as directed by the Engr-in-charge.
M&L for Shutters of any description not exc.1 sqm each refixing ('refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc) complete all as directed by the Engr-in-charge.
M&L for Shutters of any description exc.1 sqm but n.exc 2 sqm each refixing ('refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc) complete all as directed by the Engr-in-charge.
M&L for Shutters of any description exc.2 sqm each refixing ('refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc) complete all as directed by the Engr-in-charge.
S&F 250 mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing and sliding bolt of extruded section and fixed to any type of shutter with screw complete all as specified and direcetd.
S&F Aluminium handles, 150 mm size, cast type anodized complete all as specified and as directed.
S&F Aluminium anodised tower bolt 200 mm long of extruded section etc, complete all as specified and as directed.
S&F Aluminium anodised tower bolt 100 mm long of extruded section etc, complete all as specified and as directed.
S&F stainless steel butt hinges 100 mm, medium weight, cold rolled, complete all as specified and as directed.
M&L as in repair steel window of area n.exc 2 sqm making in servicible condition (opening & closing of shutter) including necessary welding work, gas cutter, greasing including necessary box type hinges & handle if required etc complete all specified and directed.
M&L as in repair steel window of area n.exc 1 sqm making in servicible condition (opening & closing of shutter) including necessary welding work, gas cutter, greasing including necessary box type hinges & handle if required etc, complete all specified and as directed.
Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devetailed or welded.
Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm each but n.exc 4 sqm, making good disturbed surfaces and removing materials from site of work, complete all as specified and directed by the Engr-in-charge.
S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/Sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing given in 8 B-2 in SSR Part –II 2010,complete all as specified and directed by the Engr-in-charge.
S&F solid PVC door frame size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet, re-inforced with mild steel square tube, S&F in opening as per specification & drawing,complete all as specified and directed by the Engr-in-charge.
S&F 3 mm thick plain glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane including necessary hacking of old broken glass, complete all as specified and directed by the Engr-in-charge.
S&F 4mm thick one side frosted glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane including necessary hacking down, complete all as specified and as directed.
M&L for preparation of old treated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and as directed.
M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and as directed.
Preparation of old treated surfaces of wooden, not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint,complete all as specified and as directed.
Preparation of new or previously untreated surfaces of wooden, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink prime,complete all as specified and as directed..
S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at unctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.etc complete all as specified and as directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, luminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge etc complete all as specified and as directed.
S&F Prelaminated particle board 9mm thick, exterior grade, prelaminated both sides with decorative choice laminations , fixed with screws or joining cleats to aluminium frame work,complete all as specified and as directed.
S&F 5.50mm thick sheet glass of ordinary quality and glazing with oil putty or Silicon beading to aluminium frame or steel frame in squares exc 0.50 sqm in each pane, complete all as specified and as directed.
S&F Floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor,complete all as specified and as directed.
S&F Aluminium diecast Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc, ccomplete all as specified and as directed.
S&F Mortice lock, made with Brass of vertical type in size 75 mm with 2 lever and fixed in Aluminium Frame,complete all as specified and as directed.
S&F 4mm thick sheet glass of ordinary quality and glazing with rubber in squares n exc 0.50 sqm in each pane, complete all as specified and as directed
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc, complete all as secified and as directed
Material and labour for applying two coats of white wash on wall including complete removal of existing treatment by brooming down or with steel wire brushing, scraping down smoke soots, moulds of old plastered surfaces etc, complete all as specified and as directed
Material and labour for applying three coats of white wash on wall including preparation of new plastered surfaces etc complete all as specified and as directed.
M&L for complete removal of existing treatement of internal wall by brushing down and appying two coat of oil bound distemper over a coat of alkali resistant priming paint etc complete all as specified and as directed.
M&L for newly plastered surface of wall appying two coat of white or tinted oil bound distemper over one coat of alkali resistant priming paint etc complete all as specified and as directed.
M&L for 3 mm coat of wall care putty on wall including preparation of surface with sand paper etc. to obtain smooth surface, complete all as specified and as directed.
Material and labour for complete removal of existing treatment by steel brushing and applying two coats of white wash on ceiling surfaces etc, complete all as specified and directed.
Material and labour for applying one coats of white wash on ceiling including preparation of old plastered surfaces etc, complete all as specified and as directed.
Material and labour for applying two coats of white wash on ceiling including preparation of new plastered surfaces etc complete all as specified and as directed.
M&L for complete removal of existing treatment on old surface of wall by brooming down or with steel wire brushing, scraping down smoke soots, moulds and applying Two or more coats of 100% Premium acrylic emulsion paint (ISI marked Weather Coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including crack filling with external wall care putty etc complete all as specified and as directed.
M&L for preparation of new surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint (ISI marked Weather Coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and directed.
M&L for preparation of oil painted surface of wall (Plastered Surface of Wall) and applying one coat of Synthetic Enamel paint, complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and as directed.
Taking down cement plaster or mosaic plaster on brick or stone walls of skirting surface etc including racking out joints, hacking for key to receive wall tile etc, complete all as specified and as directed.
M&L for 600 x 600 x 10 mm thick light shade Vitrified tiles as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc including screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes, complete all as specified and as directed.
All as per item No.76 here-in-before but in vertical surfaces such as dado/skirting including 10 mm thick screed bed in CM 1:3 complete all as specified and as directed.
M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc including screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.
M&L for Glazed ceramic tiles light coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc including 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting, complete all as specified and and as directed.
M&L for 20 mm thick machine cut, pre-polished granite stone slab, in long shelves floor etc laid over and including 15mm thick CM 1:4 screed bed, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with the shade of granite stone including rounding / moulding the edges half round, complete all as specified and as directed.
S&F PVC valveless, syphonic action type, low level flushing cistern 10 Ltrs capacity with inlet, ball valve, float and handle including brackets (excluding flush/discharge pipe), complete all as specified and as directed.
S&F vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor etc,complete all as specified and as directed.
S&F Vitreous china wash down water closet European type (pedestal pattern) (excluding flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and seat & cover complete all as specified and as directed.. (Make: Hindware or Parry)
Supply and fix, China bowl urinal half stall type white bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap) including waste pipe.and Waste coupling suitable for urinals, (32 mm bore and Minimum weight 32mm-45gms) Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms),complete all as specified and as directed. (Make: Hindware or Parry)
S&F Vitreous china squatting plate urinal, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urianl against floor in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement,complete all as specified and as directed. (Make: Hindware or Parry),
S&F Vitreous china WHB 550x400mm size white flat back with brackets incl cutting or pinning ends of brackets (excluding waste pipe) complete all as specified and as directed. (Make: Hindware or Parry)
S&F 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and as directed.
S&F 15 mm bore Pillar taps,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and as directed.
S&F 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed,complete all as specified and as directed.
S&F 15 mm bore Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. (Make: Essco SQT512KN),complete all as specified and as directed.
S&F as in repairs of 15 mm dia two way long body bib cock with wall flanges fixed with iron pipe complete as specified and directed by Engr-In-Charge. Make Essco (MQT-512AKN or SQT-512AKN) or equivalent,complete all as specified and as directed.
S&F as in repairs of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.2 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make Essco (ALE-CHR-583 or equivalent),complete all as specified and as directed.
S&F in 15 mm bore Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms) etc,complete all as specified and as directed.
All as per item no 93 but suitable for urinals, (Minimum weight 15mm-50gms) etc,complete all as specified and as directed.
S&F of Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms),complete all as specified and as directed.
S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms),complete all as specified and as directed.
S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms),complete all as specified and as directed.
S&F Brass chromium plated fancy type bottle traps of 32 mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed,complete all as specified and as directed.
Taking up or down 15mm bore steel tubing and connections complete all as specified.
All as per item No- 99 but 20mm bore.
Refixing of 15mm bore old GI/steel tubing and connection in new or old positions walls and celings or laid in floors in concealed type includings taking down the old one complete all as specified and as directed .
All as per item no 101 here in before but 20mm bore complete all as specified and as directed
S&F for 15mm bore GI tubing medium grade with all fittings fixed to walls in concealed type or laid in floors in concealed type,complete all as specified and as directed.
All as per item No- 103 but 20mm bore.
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, complete all as specified and as directed.
S&F 100 mm dia CI (sand cast) waste and vent pipes in any length fixed with cement joints laid in trenches or in floor, complete all as specified and as directed.
S&F 100 mm dia CI (sand cast) waste and vent pipes in any length fixed with cement joints laid and fixed to wall etc complete all as specified and as directed.
Ditto Item no 107 but except pipe and fixing only on wall.
S & F CI bend (Sand cast) of any radius with dimineshing pieces or tapers (larger bre measured) door including jointing with cement joints for (100 mm bore).complete all as specified and as directed.
Ditto Item no 109 but except fittings and fixing only.
Taking down PVC drain pipes ( any size or pattern) including all fittings head shoes, bends, swan neck etc, complete all as specified and as directed
S&F 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints fixed to walls,complete all as specified and as directed.
S&F 110mm bore PVC (SWR) vent cowl,complete all as specified and as directed.
S&F 110mm bore PVC (SWR) `P' or 'S' trap,complete all as specified and as directed.
S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal, complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends any radius, complete all as specified and as directed.
S&F 75 mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints fixed to walls,complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) bends any radius, complete all as specified and as directed.
S&F grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap,complete all as specified and as directed.
S&F PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement etc, complete all as specified and as directed.
S&F in repairs Salt Glazed gully trap square or round mouthed (150X150)mm, (type p )setting and jointing with solvent cement etc, complete all as specified and as directed.
Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and fittings complete and making good the disturbed surfaces all as directed by Engineer-in-Charge.
M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including PVC casing capping 25/20 mm width with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC/wooden switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed.
All as per Item No 123 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm complete all as specified and as directed.
All as per item No 123 here-in-before but for one 5 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.
All as per Item No 123 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with 4 Sqmm copper cable FRLS & 2.5 Sqmm FRLS copper cable for earth continuity wire complete all as specified and as directed.
S&F sub main wiring with 2 run of 4 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable FRLS working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including heavy duty rigid non-metallic PVC casing/caping (25mm dia) including size 4sqmm (nominal cross sectional area) PVC insulated un-sheathed single core multi stranded copper conductor cable as earth continuity conductor connected to main switches/DB"S or common earth dully complete all as specified and directed after taking down old sub main wiring complete and making good the disturbed surface complete all as specified and as directed. ( NOTE :- Two runs of 4 Sqmm pvc wire, one run of 4Sqmm pvc wire and one run of pvc casing caping/ PVC conduit will be measured as one unit
S&F switch piano flush type 5 Amp single pole one way, complete all as specified and as directed.
S&F socket flush type 5 Amp 5 Pin,complete all as specified and as directed.
S&F switch socket combination 5 Pin 5 Amp universal,complete all as specified & as directed.
S&F switch socket combination 5 Pin, 5/15 Amp universal, complete all as specified & as directed.
S&F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and as directed.
S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 4 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour, complete all as specified and as directed. (Make:Havells ,Hager,Schneider or Legrands).
S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 8 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour, complete all as specified and as directed. (Make:Havells ,Hager,Schineder or Legrands).
M&L for MCB, SP, 240V, 6 to 32 Amps and ' C ' series breaking capacity 10 KA ISI marked,complete all as specified and as directed.
M&L for MCB, SPN, 240 V, 40 Amps, and ‘C’ series breaking capacity 10 KA complete ISI marked,complete all as specified and as directed.
S&F metal clad box enclosure with socket plugtop and MCB SP 20 Amp flush of 240v mounting enclosure with 2 pin earth plug socket, complete all as specified and as directed. (Make - Havells Hager/legrand)
S&F in repair for wall mounted LED fittings 20 watt LED 5700 k-6500k lume efficiency >100/watt pf >0.90 , extruded polycarbon heat sink provided for energy efficient heat dissipation & integrated electronic with all accessories and with lamp ,internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed by Engr-in-charge. (Make :Havells, Bajaj/Philips/Crompton)
S&F in repair of ceiling fan heavy duty suitable for 1200mm sweep 240 volt AC, 1400 RPM, necessary electric connections using 1.0 sqmm twin twisted flexible wire complete all as specified and as directed by Engr-in-Charge. Make:- Havells Cat No - XP 390, equivalent in Bajaj/Orient/USHA Note: (Old Ceiling fan after removal will be deposited to KV Singarsi)
S&F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body, complete all as specified & as directed.
S&F in repair exhaust fan heavy duty suitable for 300mm sweep 240 volt AC, 1400 RPM, including Cutting openings, through brick walls for grouting exhaust fan louvers and nuts and bolts, making good plastering and necessary electric connections using 1.0 sqmm twin twisted flexible wire, complete all as specified and as directed by Engr-in-Charge. Make:- Havells Cat No - Ventill Air DB, equivalent in Bajaj/Orient/USHA
S&F inreplacement of industrial plug and socket board with 20 amps MCB with sheet metal enclosure and plug top complete as in repair,complete all as specified and as directed by Engr-in-Charge (Make: HPL/Standard) or Equivalent
M&L for Earthing complete with copper earth plate electrode of size (600 x 600 x 3.15) mm ,buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level)with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to copper earth strip 32X6mm for below ground level & 20x3 mm copper strip for above ground by means of bolts ,nuts ,check nuts of copper including 40mm dia GI pipe med grade for protection of earthing strip excavation and earth work in any type of soil, charcoal salt filling 15 cm around the earth plate as shown in electrical plate no 3 of SSR part-I 2004, 20 mm bore, GI watering pipe medium grade 1.50 mtr long including making pit with PCC 1:3:6 type C1 and pre cast RCC cover 40 mm thick, reinforced with 8mm dia deformed bars @ 100 mm c/c both ways with lifting handles and funnel etc including testing complete all as specified and directed by Engr-in-charge.
M&L for Earthing complete with GI earth plate 60x60cmx6mm thick electrode and 4mm dia GI wire as earthing lead burried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to galvanised iron strip 25×4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade , charcoal dust and salt etc and connected to earthing test point including taking up of old UNSV earthing complete all as specified and as directed by Engr-in-Charge.
M/S KUMAR AVINASH
M/S SINGH ENTERPRISE
SHARMA ENTERPRISE
M/S AMARNATH AGARWALLA
M/S New Builders Corporation
M/S ASHA ENTERPRISE
M/S MBS TRADING CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .