REPAIR/MAINT OF EXTERNAL ELECTRIFICATION SECURITY LIGHT AND OTHER MISC WORK AND REPAIR/MAINT OF ELECT AND WATER SUPPLY INSTALLATION AT ADRDE AGRA UNDER GE I RND DELHI

Amount

Excavation in trenches not exceeding 1.5 M depth & n.exc. 1.5M wide for laying of cable, pole in soft /loose soil including taking out old GI pipe with cable and bricks complete all as specified and as directed.

Returning and filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing of excavated material to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

Supply and spread dry sand for cable cushioning in trenches complete all as specified and as directed.

Supplying and laying un-reinforced precast concrete cable cover, Class HVP, Type I, flat, size 450mm x 180mm x 40mm, for HT cable complete all as specified and as directed. Make:- Mehtab / Suprime or equivalent.

M&L for cable protection with one layer of sub class 'B' bricks (locally available best quality) laid flat (length of brick laid across the cable) complete all as specified and as directed.

Supply & Laying GI tubing, light grade, 40 mm dia bore including fittings in trenches, wall, pole, plinth protection for cable protection complete all as specified and as directed. Make:- Jindal/Tata/Prakash.

All as per ser item No. 7.00 above but 80 mm dia bore.

Supplying, laying, jointing & testing of 11000 volts grade, heavy duty, HT XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, 3 Core, 95 Sqmm nominal cross-section in service laid in loops /ducts, along wall /pole or under floor /road or laid in trenches connections including taking out old unserviceable cable complete all as specified and as directed. Make:- Havells/Universal/Finolex/Gloster.

Supplying, laying, jointing & testing of 1100 volts grade, heavy duty, LT XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, 3.5 Core, 240 Sqmm nominal cross section in service connections laid in loops /ducts, along wall /pole or under floor /road or laid in trenches including taking out old unserviceable cable complete all as specified and as directed. Make:- Havells/Universal/Finolex/Gloster.

All as per ser item No. 10.00 above but 150 Sqmm 3.5 Core.

All as per ser item No. 10.00 above but 120 Sqmm 3.5 Core.

All as per ser item No. 10.00 above but 95 Sqmm 3.5 Core.

All as per ser item No. 10.00 above but 70 Sqmm 3.5 Core.

All as per ser item No. 10.00 above but 50 Sqmm 3.5 Core.

All as per ser item No. 10.00 above but 35 Sqmm 3.5 Core.

All as per ser item No. 10.00 above but 25 Sqmm 3.5 Core.

S&F cable jointing kit for 11 KV (earthed) grade cable, for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of 95 Sqmm. Make : Denson/Raychem/M-Seal.

S&F Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm all as specified and as directed. Make : Denson/Raychem/M-Seal.

All as per ser item No. 19.00 above but for out door.

S&F cable jointing kit for 1.1 KV (earthed) grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3.5 Core XLPE armoured aluminium conductor cable of 70 Sqmm. Make : Denson, Raychem, M-Seal

All as per ser item No. 21.00 above but 95 Sqmm.

All as per ser item No. 21.00 above but 120 Sqmm.

S&F in repair air break switch gang operated device HT 11 KV triple pole outdoor type with 12 insulator 200 Amps rating with drop out fuse assly with fuse carrier and the fuse element mounted on insulator and steel frame mechanically operated with operating mechanism consisting of operating rod of 25mm bore light grade GI pipe of suitable length operative from ground level and with locking arrangement with MS flat iron clamp 50 x 6 mm including MS channel of suitable size and length to fixing GOD including nuts, bolts and washers all as specified and as directed. Make :-Jaipuria/Atlas/Rashtriya.

S&F pin type insulator, porcelain vitreous white, brown or green insulator including one galvanized mild steel spindle two galvanized iron washers and one galvanized iron nut 100mm height 65 mm dia for working pressure 1100 volts including desmantling old unserviceable insulator complete all as specified and as directed. Make :-Jaipuria/Atlas/Rashtriya.

S&F in repairs for stay assembly complete with all accessories as shown in electrical plate No-1 of SSR part-I using stay rod of 16 mm dia including galvanised steel stay strand of 3.15 mm - 9.00M (4.32 Kg) grade -2 quality and one loop type insulator porcelain vitreous white or brown large size of over all dimensions 140x90 mm with clearance of hole 25.5 mm complete all as specified and directed. Make :-Jaipuria/Atlas/Rashtriya. Note:- Earth work in excavation, PCC in foundation, stay clamp and loop insulator shall be measured and paid separately under respective item of this BOQ.

S&F in repair aluminum conductor steel reinforced (ACSR) including copper binding wire complete all as specified and as directed.

S&F in repair cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.

S&F in repair of 2.50 Sqmm, 2 Core standared aluminium conductor PVC insulated unsheathed cable to connect from junction box to light fitting testing complete all as specified and as directed. Make : Polycab, Havells, HPL

Filtration, dehydration transformer oil of transformer capacity 50 KVA to 630 KVA indoor/outdoor type, pole mounted/plinth mounted in situ till achieve dielectric strength min 40 KV at 4mm gap complete all as specified and as directed.

M&L for topping up/replacement of transformer oil with new transformer oil suitable for working voltage 11000 volts grade including necessary dehydration to achieve dielectric strength min 40 KV at 4mm gap complete all as specified and as directed. Make:- GULF/Castrol/HP/IOC/BP. Note for ser item No 30 & 31 :- (a) New transformer oil to be brought in company sealed ISI marked container with original test certificate. (b) Filtration /dehydration of transformer oil shall be carried out at the location where transformer is installed and necessary filter/dehydration plant having pressure gauge, hour meter, temperature gauge to be brought at site by contractor (c) During process of filtration of oil, transformer shall be on load.

Opening of top cover only by unscrewing all nuts, bolts & washers for replacement of HT/LT bushings, lifting of core assembly for cleaning and refixing complete with new cork sheet gasket, existing/wherever required new nuts, bolts & washers for transformer capacity 50 to 250 KVA indoor/outdoor type complete all as specified and as directed. Note:- HT/LT bushings and nuts, bolts & washers required shall be measured here-in-after under appropriate item.

All as per ser item No. 32.00 above but transformer capacity 400 to 630 KVA.

Supply only of transformer LT porcelain bushing in situ suitable for 1100 volts grade complete with brass rod, rubber bush, washers, nuts and cork sheet gasket for the rating of 50 to 630 KVA indoor/outdoor transformer complete all as specified and as directed. Note:- Opening of top cover shall be measured and paid separately under respective item.

S&F in repair of transformer HT porcelain bushing suitable for 11 KV grade complete with brass rod, rubber bush, washers, nuts, check nuts and cork sheet gasket for the rating of 50-630 KVA transformer complete all as specified and as directed. Note:- Opening of top cover shall be measured and paid separately under respective item.

S&F in repair LED light fitting energy saving, environmental friendly, long life made up of pressure die cast complete all as specified and as directed. Make:- Havells Cat Part No. ENDURAREARLPLUSSL70WLED757PASYTOPC or equivalent Bajaj/Philips/Crompton Greaves.

S&F in repair of cable junction box size IP 66/67 "wheather proof" for outdoor installation, with knockouts for cable entry, black colour, Size 205mmx255mmx112mm with arrangement like clamps, nuts and bolts etc. with locking arrangement complete all as specified. Make : Hensel Cat Part No : KF 2525 B or equivalent Sintex

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earthwire 4mm dia by means of nuts bolts, check nut and washers of galvanised iron strip 32 x 6 mmearth lead bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40cm x 40 cm x 40mm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifting made out of 8 mm dia MS bar, funnel, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR Part-I.

S&F in repair MCCB 400 Amps, 3 pole, 415 Volts AC, breaking capacity 36KA with microprocessor release complete all as specified and as directed. Make:- Legrand/L&T/Siemens/ABB.

All as per ser item No. 39.00 above but MCCB 250 Amps, 3 pole.

All as per ser item No. 39.00 above but MCCB 160 Amps, 4 pole.

All as per ser item No. 39.00 above but MCCB 200 Amps, 4 pole.

All as per ser item No. 39.00 above but MCCB 100 Amps, 3 pole.

M&L for painting to existing pole 11 M long from coping with one coat of aluminium paint preparing old surface (including white washing one coat for coping) complete all as specified and as directed.

All as per ser item No. 44.00 above but pole 09 M.

S&F Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm all as specified and as directed. Make : Denson, Raychem, M-Seal

All as per ser item No. 46.00 above but outdoor termination cold shrink type.

S&F in repair steel tubular pole double arm type 410, SP-55 (overall length 11 mtr long) complete with cast iron base plate as specified including two coat of aluminium paint over one coat of redoxide primer and writing pole number with white paint on black base, including earthwork complete all as specified and as directed. Make : The national tubing company or equivalent Bharat Conduits Steel Works Kanpur, Electro Steel Kolkata,

M&L for plain cement concrete (1:4:8), type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass-concrete for steel tubular Pole complete all as specified and as directed.

All as per ser item No. 46.00 above but concrete (1:3:6), type C-2.

M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping of poles complete including necessary form work all as specified and as directed.

Triming/cutting of tree branches up to hight 12.00 m to 15.00 m in electric HT/OH lines with both side 3.00 m distance from outer conductor and including surface dressing and removing the material at a distance not exceeding 500 m complete all as specified and as directed.

Cutting bushes, grass throny, small plants/ trees up to height 5m in and around the E/M installation and electric FPB and including surface dressing and removing the material outside Defence land complete all as specified and directed.

S&F in repairs lightening arrestor HT,11 KV, 10 KA expulsion type complete with all fittings,transmission class complete all as specified and as directed. Make :-Jaipuria/Atlas/Rashtriya.

S&F Disc type insulator, porcelain, vitreous 145mm high and 255mm dia ball and socket type, white, brown or green 'Two-in-series' assembly for tension with tension clamps for conductors, working pressure 11000 volts including taking down old unserviceable insulator complete all as specified and as directed. Make :-Jaipuria/Atlas/Rashtriya.

Supply, installation, testing and commissioning in replacement of indoor factory made powder coated cubical indoor type single door, compartmentalised LT panel board of size 900x400x1600mm complete weather proof and vermin proof conforming to IP-54 (CPRI Approved) made out of 2mm thick CRCA sheet including provisions for ventilation and cable termination alley all as per relevant IS. It shall be mounted on 40 x40 x 6mm angle iron frame duly painted over red oxide primer with a clearance of at least 0.45 Meter above GL and 0.30M below ground including required earth work, PCC for foundation and coping. Markings should be made with vinyl sheet indicator to identify incoming and outgoing circuits including one LT Danger notice plate of adequate size fixed over front door shall be comprising following:-

STAR DELTA STARTER 10 HP-2 Nos. Each Having :- (viii) MCB 40 A 10 KA 3 Pole - 01 No (ix) Contractor 18 A TP (Main & Delta) - 02 Nos (xi) Over Load relay 6-10 A (xii) Star delta timer - 01 No (xiii) Digital Amp Meter (0-30A) - 01 No (xiv) CT 30/5A - 01 No (xv) Push button STAR/STOP - 02 Nos (xvi) Motor protection automation phase sequence corrector single phase preventer with facility to change over from automatic to manual with contractor upto 10 HP motor etc. - 02 Nos (xvi) Bus bar chamber 100A 3 strips N/L 60A aluminium - 01 Set (xvii) Enclosure of size as above.

Supply, installation, testing and commissioning in replacement of indoor factory made powder coated cubical indoor type single door, compartmentalised APFC Panel Board of size 1300x400x950mm complete weather proof and vermin proof conforming to IP-54 (CPRI Approved) made out of 2mm thick CRCA sheet including provisions for ventilation and cable termination alley all as per relevant IS. It shall be mounted on 40 x40 x 6mm angle iron frame duly painted over red oxide primer with a clearance of at least 0.45 Meter above GL and 0.30M below ground including required earth work PCC for foundation and coping. Markings should be made with vinyl sheet indicator to identify incoming and outgoing circuits including one LT Danger notice plate of adequate size fixed over front door shall be comprising of following:-

(i) INCOMING MCCB 160 A 25 KA 3 Pole Thermal - 01 (ii) Capacitor duty contractor for 20 KVAR - 02 Nos (iii) Capacitor duty contractor for 10 KVAR - 03 Nos (iv) Capacitor duty contractor for 05 KVAR - 02 Nos (v) Contractor 12 A for 3,2 KVAR - 02 No (vi) Capacitor 20 KVAR - 02 Nos (vii) Capacitor 10 KVAR - 03 Nos (viii) Capacitor 05 KVAR - 02 Nos (ix) Capacitor 03 KVAR - 01 No (x) Capacitor 02 KVAR - 01 No (xi) MCB 63A 10kA TP for 20 KVAR- 02 Nos (xii) MCB 16A 10kA TP for 5,3,2 KVAR- 04 Nos (xiii) MCB 25A 10kA TP for 10 KVAR- 03 Nos (xiv) APFC relay 10 stage - 09 Nos (xv) Digital Volt Meter (0-500V) - 01 No (xvi) Digital Amp Meter (0-150A) - 01 No (xvii) Indicating light R-Y-B - 03 Nos (xviii) CT 150/5 A - 03 Nos (xix)Control MCB 6A SP - 04 Nos (xx) Capacitor 5 KVAR fixed type with MCB 16A 3 Pole - 01 No (xxi) Busbar 160 A strips & N/L 80 Aluminium - 01 Set (xxii) Enclosure of size as above.

Supply and laying in repair 150mm dia bore galvanised steel tubing medium grade laid in trenches/under floor/in walls and jointing including necessary fittings such as bends, elbow, tees sockets etc complete all as specified. Make:- TATA/JINDAL/NTL/NEZONE.

All as per ser item No 59.00 above but 100 mm dia bore.

All as per ser item No 59.00 above but 80 mm dia bore.

Supplying, laying, jointing & testing of 1100 volts grade, heavy duty, LT XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed,3.5 Core, 70 Sqmm nominal cross section in service connections laid in loops /ducts, along wall /pole or under floor /road or laid in trenches including taking out old unserviceable cable complete all as specified and as directed. Make:- Havells/Universal/Finolex/Gloster.

All as per ser item No. 62.00 above but 35 Sqmm 3.5 Core.

M&L for preparation of old painted surfaces removing dust and other deposited materials by scrapping from LT panel board of size 1.50x0.80x0.45 mtr and painting of LT panel board with two coat of syenthetic enamel paint including writing 50mm size figure/letter over black back ground for marking panel board Nos sub stn Nos with white synthetic enamel paint complete all as specified and as directed.

S&F in repair MCCB 63 Amps, 3 pole, 415 Volts AC, breaking capacity 16KA, adjustable type complete all as specified and as directed. Make:- Legrand/L&T/Siemens/ABB.

GAURAV ASSOCIATES

PD GUPTA AND COMPANY

Gupta Automobiles

LUCKY SALES CORPORATION

dee een enterprises

Balaji Associate

8M/S TIWARI and SONS