Loading
Loading…
Loading…
Tender Value
₹6.5 Cr
EMD Value
₹4.8 L
Closing Date
27 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S AND T
12 conditions · 1 needing a document upload
The tenderer must have successfully or substantially completed any of the following during last 07(seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Similar Nature of work for this tender is -"Any work involving outdoor Signaling work."
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
1 condition
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Reliability Improvement for Replacement of Over Due Relays, LEDs on age cum condition basis at ASTE-BWN Section.
SDSTE-RELAY-LED-BWN-26
SDSTE-RELAY-LED-BWN-26
Open
Works - General
12 Months
Howrah, West Bengal
₹0
₹4.8 L
27 Mar 2026
27 Feb 2026
13 Mar 2026
266 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 6,53,04,405.34 | ||
| — | — | — | Above/ 1086420.00 Below/P | ||
| Supply of Q-Series Magnetically Latched Neutral Line Relay (QL1 Type), 11F/4B, 24V DC complete with plug board (base plate), connectors and retaining clips and conforming to BRS- 935A and RDSO Specn.No. IRS: 5-34 & S-23with Amdt. upto date as applicable or latest. The interlocking code for this unit shall be "ABDEG". Inspection authority:- RDSO | — | 190.00 | — | — | |
| — | — | — | Above/ 175010.00 Below/P | ||
| "Supply of Relay fail safe electronic time delay device with fixed timing (0 -120) seconds and conforming to RDSO Specn. No.IRS: 5-61/2000 with Amnd.2 and IRS: S-34 & S-23 with Amdt. up to date or latest mounted on Q-series relay base & covered complete with connectors, retaining clip etc. The interlocking code for this unit shall be ""AFGKY"". Inspection authority:- RDSO" | — | 110.00 | — | — | |
| — | — | — | Above/ 3919776.00 Below/P | ||
| Supply of Q-Series LED ECR (Universal Type i.e. QECX- 61), 4F/4B complete with plug board (base plate), connectors, retaining clips etc and conforming to BRS:94 1A STS/E/RELAYS/AC LIT LED SIGNAL/09-2002, Amdt. -1 and RDSO Specn.No.IRS: S-34 & S-23 with Amdt. upto date as applicable or latest. The interlocking code for this unit shall be "ABDHK".Inspection authority:- RDSO | — | 798.00 | — | — | |
| — | — | — | Above/ 1538000.00 Below/P | ||
| "Supply of Q-Series Line Relay (QNA1 Type),AC immunized, 8F/8B, 24 V DC along with plug board (base plate), connectors, retaining clips etc and conforming to BRS-931A and RDSO Specn. No.IRS: S@45"44@ S-23 and S-60 or latest. The interlocking code for this unit shall be ""ABDGH"". Inspection authority:- RDSO" | — | 400.00 | — | — | |
| — | — | — | Above/ 3045320.00 Below/P | ||
| "Supply of Q-Series Line Relay (QNA1 Type), AC immunized, 12F/4B, 24 V DC along with plug board (base plate), connectors, retaining clips etc and conforming to BRS-931A and RDSO Specn. No. IRS: S - 34, S-23 and S-60 with amdt. upto date as applicable or latest. The interlocking code for this unit shall be ""ABDFH"". Inspection authority:- RDSO" | — | 760.00 | — | — | |
| — | — | — | Above/ 2148330.00 Below/P | ||
| Supply of Q-Series Neutral Line Relay (QN1 Type), 12F/4B, 24V DC complete with plug board (base plate), connectors and retaining clips etc and conforming to BRS- 930 and RDSO Specn.No.IRS: S-34 & S-23 with Amdt. upto date or latest. The interlocking code for this unit shall be "ABCDE". Inspection authority:- RDSO | — | 570.00 | — | — | |
| — | — | — | Above/ 2174550.00 Below/P | ||
| "Supply of Q-Series Track Relay (QTA2 Type), AC immunized, 9 Ohms, 2F/1B along with plug board (base plate), connectors, retaining clips etc and conforming t o BRS:939A & 966(Appendix F2) and RDSO Spec No. IRS:S 34, S-23 with amdt. upto date as applicable or latest with latest amdt. or latest. The interlocking code for this unit shall be ""FGHKX"". Inspection authority:- RDSO " | — | 570.00 | — | — | |
| — | — | — | Above/ 1046000.00 Below/P | ||
| "Supply of Q-Series Neutral Line Relay(QSPA1 Type), 24V DC,8F/4B along with plug board (base plate), connectors, retaining clips etc and conforming to BRS-933A and RDSO Specn.No.IRS: S - 34, S- 23 & S 60 with amdt. upto date as applicable or latest. The interlocking code for this unit shall be ""ABDEJ"". Inspection authority:- RDSO" | — | 200.00 | — | — | |
| — | — | — | Above/ 1368400.00 Below/P | ||
| Supply of Contactor Unit (QBCA 1 Type), 24 V DC, 2F(HD)/ 4B or 2F(HD)2F-4B complete with plug board (base plate), connectors, retaining clips etc and conforming to BRS- 943 and RDSO Specn.No.IRS: 5-34 & S-23 with amdt. upto date as applicable or latest. The interlocking code for this unit shall be "BCEJK" or "DEHJX". Inspection authority:- RDSO | — | 200.00 | — | — | |
| — | — | — | Above/ 3177560.00 Below/P | ||
| Supply of LED signal lamps for Main colour light Signal, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO/SPN/ 199/2010(Rev.1) or latest. Inspection: RDSO A)RED Aspect | — | 380.00 | — | — | |
| — | — | — | Above/ 1912236.00 Below/P | ||
| Supply of LED signal lamps for Main colour light Signal, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO/SPN/ 199/2010(Rev.1) or latest. Inspection: RDSO B)YELLOW Aspect | — | 228.00 | — | — | |
| — | — | — | Above/ 2151864.00 Below/P | ||
| Supply of LED signal lamps for Main colour light Signal, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO/SPN/ 199/2010(Rev.1) or latest. Inspection: RDSO C)GREEN Aspect | — | 228.00 | — | — | |
| — | — | — | Above/ 1353066.00 Below/P | ||
| Supply of various LED signals {Subsidiary Signal}, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO /SPN/153/2011 (Rev.4.1) or latest. Inspection: RDSO A)LED for Route Aspect | — | 247.00 | — | — | |
| — | — | — | Above/ 1401725.00 Below/P | ||
| Supply of various LED signals {Subsidiary Signal}, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO /SPN/153/2011 (Rev.4.1) or latest. Inspection: RDSO B)LED for Shunt Signal Aspect | — | 247.00 | — | — | |
| — | — | — | Above/ 778620.00 Below/P | ||
| Supply of various LED signals {Subsidiary Signal}, 110V AC retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Specn. No.RDSO /SPN/153/2011 (Rev.4.1) or latest. Inspection: RDSO C)LED for Calling ON / Guard Repeater Signa1 Aspect | — | 114.00 | — | — | |
| — | — | — | Above/ 19950.00 Below/P | ||
| "Supply of 1 x 6 Sq.mm. Green multi strand copper power wire as per IS:694:20 10 or latest, 84 conductor each dia 0.30mm +/- 0.01 with insulation thickness of 0.8 mm and nominal conductor resistance of 3.3 ohms/km and test parameters as per RDSO Specn. No.IRS:5- 76/89(Amnd.3) or latest.Colour of the wire which is required will be specified by the Engineer incharge. Inspection: (i) RDSO/RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | — | 475.00 | — | — | |
| — | — | — | Above/ 90440.00 Below/P | ||
| "Supply of 1 x 10 Sq.mm. {Green} multi strand copper power wire as per IS:694:20 10 or latest, 140 conductor each dia 0.30mm +/- 0.01 with insulation thickness of 1.0 mm and nominal conductor resistance of 1.91 ohms/km and test parameters as per RDSO Specn.No.IRS:S- 76/89(Amnd.3) or latest.Colour of the wire which is required will be specified b y t h e Engineer incharge. Inspection: (i) RDSO/ RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | — | 760.00 | — | — | |
| — | — | — | Above/ 62225.00 Below/P | ||
| "Supp1y of 1 x 16 Sq.mm. {Green} multi strand copper power wire as per IS:694:20 10 or latest, 126 conductor each dia 0.40mm +/- 0.01 with insulation thickness of 1.0 mm and nominal conductor resistance of 1.21 ohms/ km and test parameters as per RDSO Specn. No.IRS: S- 76/89(Amnd.3) or latest. Colour of the wire which is required will be specified b y t h e Engineer incharge. Inspection: (i) RDSO/RITES if value of item in work more than 5 lakhs(ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | — | 475.00 | — | — | |
| — | — | — | Above/ 168150.00 Below/P | ||
| "Supply of 1 x 35 Sq.mm. {Green} multi strand copper power wire as per IS: 694:2010 or latest, 276 conductor each dia 0.40mm +/- 0.01 with insulation thickness of 1.2 mm and nominal conductor resistance of 0.554 ohms/km and test parameters as per RDSO Specn. No.IRS: 5-76/89(Amnd.3) or latest. Colour of the wire which is required will be specified by the Engineer incharge. Inspection: (i) RDSO/ RITES if value of item in work m ore tha n 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board." | — | 950.00 | — | — | |
| — | — | — | Above/ 151886.00 Below/P | ||
| Provision of cement concrete enclosure for earth electrodes as per DRG. NO. S&T/C- 36(NKG). This includes supply of all materials by the contractor duly inspected by consignee. | — | 266.00 | — | — | |
| — | — | — | Above/ 245787.80 Below/P | ||
| Supply of MS FLAT (SPEC. NO. 226 STD or latest) of size 35 mm x 6 mm with length 5 mtr with holes of 12 mm dia at both ends as per CSTE /ER'S DRG.NO.SI/TYP/0097 DTD. 25.03.25 (or latest). Inspection : by consignee. | — | 1349.00 | — | — | |
| — | — | — | Above/ 69084.00 Below/P | ||
| Supply of Medium class GI pipe 50 mm dia (3.6 mm thicknessJ as per IS 1239 {Part 1 J: 2004 for use in ASM room and at any other location as decided by Site Engineer. It includes supply of all material required for fixing arrangement. At the ends of GI pipe, flexible/corrugated HDPE pipe will be provided by contractor to protect cables from sharp edges and sudden bends. | — | 171.00 | — | — | |
| — | — | — | Above/ 383800.00 Below/P | ||
| Supply of 50mm x 6mm GI tape for interconnecting earth electrodes.. Inspection: Consignee | — | 950.00 | — | — | |
| — | — | — | Above/ 86242.00 Below/P | ||
| "Supply of Permanently Lubricated HDPE Telecom duct of size 50/42 mm and accessories as per latest Specification TEC GR No. GR/TX/CDS- 008/03/March 11 with latest amendment or Latest in length of 1000 mtrs/roll. Duct to besupplied from TEC approved sources. . For each km. Of HDPE duct following items are to be supplied (a) end plugs-2 nos. (b) cable sealing plugs - 2 nos. (c) plastic couplers slip fit/push fit type-2 nos. (d) end plugs to be provided along with drum 2 nos." | — | 1.00 | — | — | |
| — | — | — | Above/ 189920.00 Below/P | ||
| "Supply of Handheld Digital Earth Clamp Tester for clamp on earth/ground resistance measurement up to 1000 ohms. Accuracy 0.1 - 0.99 D: 1%, 1 - 49 D: 1.5% Also measure current leakage u p t o 20A. N o spines required for measurement Model - DECT-2 or equivalent / higher version make Motwane/ Stanlay/ Fluke/Megger.Item t o be supplied after successful demonstration and Approval of Railway. Inspection: Consignee" | — | 2.00 | — | — | |
| — | — | — | Above/ 308826.00 Below/P | ||
| Fixing of earth electrode including laying and installation of MS flat of size 35 mm x 6 mm with length 5 mtr or as per extant practice of Eastern Railway. As per CSTE /ER'S DRG.NO.SI/TYP/0097 DTD. 25.03.25 for apparatus cases, signal post & other equipment as per instruction of site engineer. Provision for fixing M S fl a t a t apparatus cases/ signal post/other equipment should be made by the firm at site. Full threaded bolts of 10 mm dia and length 40 mm should be welded in the apparatus cases in such way that the MS flat at apparatus case end can be fixed from outside or from inside. Welding arrangement with accessories a n d welding materials should be arranged by the contractor for fixing of bolts at equipment end where required as per instruction of site engineer. All hardware and other miscellaneous materials required for installation to be supplied by the contractor except earth electrodes and MS flat. Note:-all materials required to be arranged by the contractor except 2 core cable will be supplied by the railway. | — | 266.00 | — | — | |
| — | — | — | Above/ 30780.00 Below/P | ||
| "Carrying out wiring of potential free contact of SPD with Datalogger via Tag Block and validation in Datalogger. These work includes the releasing of existing unused wires and wiring the relays using 16/0.2 mm copper wire as per RDSO Spec. Wire to be procured from RDSO's approved source Inspection : Consignee Note: - (i) wire to be procured from RDSO's approved source only. All required material like wire, soldering material, paint etc. to be supplied by the contractor for execution of the work. (ii)'No' in the unit column indicates 'Per SPD'" | — | 114.00 | — | — | |
| — | — | — | Above/ 931000.00 Below/P | ||
| Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom without brick alongside the track in all kinds of soil, conforming to distances as per cable route plan and refilling. This work includes clearing of route from bushes etc. The work shall be done as per the extant practice on Eastern Railway and instructions of Railway Engineer at site. Note:-(a) for all trenches from distant signal to home signal and to relay room, the minimum headway above the uppermost cable in the trench should be 600mm. If due to a large no. Of cables headway is not available, 4" of 1:2:4 concreting should be done. Note:-(b-1) payment wifi be made as per actual work done on pro-rata basis, if required depth is not available at site. (b-2) if the depth of trench is not uniform in a span of 100 mtr. Or shorter lengths if site condition demands along the cable run, minimum depth will be taken for that particular stretch for payment. | — | 3800.00 | — | — | |
| — | — | — | Above/ 29450.00 Below/P | ||
| Placing of DWC HDPE /RCC/GI pipes along with collars in trenches at places near track and road, crossings, platform cuttings etc. | — | 950.00 | — | — | |
| — | — | — | Above/ 55147.50 Below/P | ||
| "Supply of 1 X 2.5 Sqmm (36/0.3) (Green) multi strand copper power wire as per IS:694:2010 or latest, Inspection: Consignee" | — | 1634.00 | — | — | |
| — | — | — | Above/ 798.00 Below/P | ||
| "Supply of Tinned Copper LUGs for fitting in Cable Size: 6 sqmm, Barrel Inner-dia: 4.0mm, Barrel Outter-Dia: 5.5mm, Barrel Length: 10mm, Stud Hole Center-dia: 8.2mm, Palm Width: 10.0mm, Thickness: 1.3-1.5mm, Lug Length: 24mm,Thimble Type: Ring. Inspection: Consignee" | — | 266.00 | — | — | |
| — | — | — | Above/ 1064.00 Below/P | ||
| "Supply of Tinned Copper LUGs for fitting Cable Size: 10sqmm, Barrel Inner-dia: 4.7mm, Barrel Outter-Dia: 7.10mm, Barrel Length: 10mm, Stud Hole Center-dia: 9.9mm, Palm Width: 12.6mm, Thickness: 1.8, Lug Length: 27mm,Thimble Type: Ring. Inspection: Consignee" | — | 266.00 | — | — | |
| — | — | — | Above/ 878.94 Below/P | ||
| "Supply of Tinned Copper LUGs for fitting in Cable Size: 16 sqmm, Barrel Inner-dia: 6.4mm, Barrel Outter-Dia: 8.0mm, Barrel Length: 12.2mm, Stud Hole Center-dia: 10mm, Palm Width: 12.6mm, Thickness: 1.8, Lug Length: 28-30mm,Thimble Type: Ring. Inspection: Consignee" | — | 171.00 | — | — | |
| — | — | — | Above/ 782.80 Below/P | ||
| "Supply of Tinned Copper LUGs for fitting in Cable Size: 35 sqmm, Barrel Inner-dia:13 mm, Barrel Outter-Dia: 17 mm, Barrel Length: 12.2mm, Stud Hole Center-dia: 10mm, Palm Width: 12.6mm, Thickness: 1.8, Lug Length: 28-30 mm,Thimble Type: Ring. Inspection: Consignee" | — | 76.00 | — | — | |
| — | — | — | Above/ 1225.50 Below/P | ||
| "Supply of Tinned Copper LUGs for fitting in Cable Size: 2.5 sqmm, Barrel Inner-dia: 2.4mm, Barrel Outter-Dia: 3.90mm, Barrel Length: 8mm, Stud Hole Center-dia: 5.2mm, Palm Width: 9mm, Thickness: 1.3-1.5mm, Lug Length: 17-19mm,Thimble Type: Ring. Inspection: Consignee" | — | 817.00 | — | — | |
| — | — | — | Above/ 15694.00 Below/P | ||
| "Supply of Copper Strip 25X6 mm Inspection: Consignee " | — | 19.00 | — | — | |
| — | — | — | Above/ 145730.00 Below/P | ||
| "Supply of Copper tape for BRC ( 25X2) mm. Inspection: Consignee" | — | 494.00 | — | — | |
| — | — | — | Above/ 424915.05 Below/P | ||
| "Supply of Earthing powder ( Earth Enhancement Material ) as per Para 8.2 of RDSO Spn. No. RDSO/SPN/197 or latest Note :- Minimum weight of Bag should be of 10 KG. Inspection: Consignee " | — | 7581.00 | — | — | |
| — | — | — | Above/ 25558.80 Below/P | ||
| "Supply of Nut Bolts, Washer (Stainless Steel) as per the site requirement (One set consists of 1 Nut, 1Bolt , 2 washer & 2 spring washer) Note :- Hex Nuts, bolts and washers of size 5/16"" Inspection: Consignee" | — | 1083.00 | — | — | |
| — | — | — | Above/ 224200.00 Below/P | ||
| Supply of earth electrode mild steel galvanized, light class, IS:1239(PART-I)- 1979.earth electrode pipe should be with 3 mm thick, 50 mm dia and perforated(staggered),5 mm dia holes, 2 nos per 305 mm length. Earth pipe should include CI threaded cap. Materials to be procured and designed as per Drg No. SI/TYP/0097 dated 25.03.25 Inspection: - RITES | — | 190.00 | — | — | |
| — | — | — | Above/ 4035.60 Below/P | ||
| Supply of 'ELBOW'- BENDS to suit GI pipes 50 mm dia (3.6 mm thickness) Inspection: Consignee | — | 38.00 | — | — | |
| — | — | — | Above/ 1165840.00 Below/P | ||
| "Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO / RDSO/ E&B/001 or Latest. Necessary testing certificate of UL, IEC to be produced. It consist of following: (a) Copper bonded steel electrode of 3.0 m long, 17.2 mm dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. Inspection: RITES" | — | 247.00 | — | — | |
| — | — | — | Above/ 1651457.20 Below/P | ||
| Supply of Fencing frame for ring earth area, location box and other S&T premises. (Height of fence would be of 1.5m) | — | 551.00 | — | — | |
| — | — | — | Above/ 511176.00 Below/P | ||
| "Supply of ISI marked XLPE insulated PVC outer sheathed, FR-LSH, armoured with aluminium conductor cable1100V grade of size 2 core 70sq.mm as per IS no.7098 (part-1) 1988 or with latest amendment. Inspection: RDSO/RITES" | — | 1083.00 | — | — | |
| — | — | — | Above/ 134520.00 Below/P | ||
| "Supply and Execution of Exothemic Welds. This includes Welding Kit , Welding Powder, Mould and other necessary materials. Note- No. in unit column indicates per welding. Inspection: Consignee" | — | 1140.00 | — | — | |
| — | — | — | Above/ 33618.60 Below/P | ||
| "Installation of MEEB/SEEB/BRC with the insulators (As per the instruction of Site Engineer). Fitting materials & Insulator (Dough Moulding Compound Conical type of different Size) as per the site requirement to be supplied by the contractor. Note: 'No' in the unit column indicates 'per insulator' " | — | 1140.00 | — | — | |
| — | — | — | Above/ 874380.00 Below/P | ||
| "Installation of Unit Maintenance Free Earth . It includes ( i ) Digging the earth to the required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper Strip to the earth electrodes. (v) This also includes supply of CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3-inch thickness. All material tools and features required for weld will be arranged by contractor. Inspection: Consignee. " | — | 247.00 | — | — | |
| — | — | — | Above/ 269040.00 Below/P | ||
| "Segregation of Clean & Dirty wire ( Earth wire, wire from unprotected sources,etc.) in Relay Room and IPS Room. This includes supply of PVC pipe & PVC Trough of different sizes & fixing of it along with laying of dirty cable through PVC pipe/Trough. It also includes proper writing of "" DIRTY CABLE"" & "" CLEAN CABLE"" on the cable tray or PVC Pipe. Note- Job. in unit column indicates per Relay Room & IPS Room." | — | 19.00 | — | — | |
| — | — | — | Above/ 67260.00 Below/P | ||
| "Segregation of Clean & Dirty wire ( Earth wire, wire from unprotected sources,etc.) in SM Room. This includes supply of PVC pipe & PVC Trough of different sizes & fixing of it along with laying of dirty cable through PVC pipe/Trough. It also includes proper writing of "" DIRTY CABLE"" & "" CLEAN CABLE"" on the cable tray or PVC Pipe. Note- Job. in unit column indicates per SM Room." | — | 19.00 | — | — | |
| — | — | — | Above/ 84075.00 Below/P | ||
| "Segregation of Earth wire from equipment wiring in Location Box and Bunching. PVC Channels/ troughs to be provided and fixed Note- Job. in unit column indicates per Location" | — | 285.00 | — | — | |
| — | — | — | Above/ 17936.00 Below/P | ||
| "Installation of GI Tape (50 X 6 mm) for connecting Main earth pit to other earth pit in case of loop earth Note: 'No' in the unit column indicates 'per pair of earth pit'" | — | 190.00 | — | — | |
| — | — | — | Above/ 92834.00 Below/P | ||
| Welding for jointing MS flat width of different lengths strips connecting from Earth to location boxes/Signal post/Signal Unit for better continuity. Prior approval of welding material to be taken from Engineer In charge. | — | 266.00 | — | — | |
| — | — | — | Above/ 31388.00 Below/P | ||
| Closing of Cable Entry Holes by concreat permanently. The materials required for the work i.e cement ,Sand,1/4'Stone chips etc. will be supplied by the contractor. | — | 266.00 | — | — | |
| — | — | — | Above/ 11210.00 Below/P | ||
| "Fixing of Down Conductor through HDPE Pipe for A'- Class Surge Arrestor. HDPE pipe will be supplied by Rly. Note :- No. in Unit column indicates per Arrestor." | — | 19.00 | — | — | |
| — | — | — | Above/ 44840.00 Below/P | ||
| Increasing the height of 'A' Class Surge Arrestor (3 Mtrs. above of VHF Antena). Dismetalling of existing 'A' Class Surge Arrestor & refixing as per the instruction of Rly. site engineer. All the item required for cement concreating & refixing will be supplied by the contractor. | — | 19.00 | — | — | |
| — | — | — | Above/ 260072.00 Below/P | ||
| "FIXING OF FENCE AROUND THE RING EARTH AREA AND OTHER MISCLLANIOUS WORKS TO BE EXECUTED. THIS JOB INCLUDES CUTTING AND WELDING OF MS GRILL , DRILLING, CEMENT CONCRETING. THIS WORK TO BE EXECUTED IN ONE RING EARTH AREA AS PER THE INSTRUCTION OF RAILWAY SITE ENGINEER(S). ALL THE MATERIALS (i.e SAND, CEMENT, STONE CHIP ETC) & MANPOWER TO BE SUPPLIED & PROVIDED BY THE CONTRACTOR EXCEPT MS GRILL FENCE . As per 'Typical fencing for earthing S&T installation' Annexure-III (c) of document no. RDSO- Sig0SPD(PROJ)/1/2020 ver 0.0 dtd 01/01/25. Note: Per foundation of fence would be of 250mm X 250mm with 300mm minimum depth. " | — | 551.00 | — | — | |
| — | — | — | Above/ 1768805.00 Below/P | ||
| "Provision of Concreate Path Way (500 mm Width) from One Earth pit to the consequtive Earth Pit. & Painting of Earth Pit As well as concreate path way. This includes supply of Bricks, Cement. Sand, Stone chip & Paint of good quality. " | — | 817.00 | — | — | |
| — | — | — | Above/ 109858.00 Below/P | ||
| "Installation of GI Wire in location Box and soldering / Trinkering of cable armour. This includes Releasing of existing armour connection from existing GI wire and replacement with new GI wire and resoldering of armour with New GI wire. Note: 6 SWG (4mm dia) GI wire and soldering material to be supplied by the contractor." | — | 380.00 | — | — | |
| — | — | — | Above/ 1179220.00 Below/P | ||
| Earthing of relay rack and power equipment etc. to be done along with the supply of all requisite materials, Earthing shall be in the form of Ring Earth conforming to RDSO spec RDSO/SPN/197 Ver.1.0 or Latest (with a minimum 10 maintenance free earth electrodes) and as per CSTE/ER/Kolkata's technical circular No.92, using copper rings with earth resistance less than 1 ohm. The earthing shall be maintenance free. The ring earth shall be connected to copper flat of size 25x3 mm in the relay room and IPS room. The copper flat fixed on the wall to the entire breadth of Relay room and IPS room as an earth bus bar and all earth connections shall be taken from it. A, B ,C & D class protection shall be provided for all EI equipmentlnepection: Consignee | — | 5.00 | — | — | |
| — | — | — | Above/ 325200.00 Below/P | ||
| Supply of unchanged Low Maintenance Lead Acid (LMLA) secondary cell, shelf mounting type conforming to RDSO Specn.No. IRS:5-88/2004 or latest with inter cell connectors, nuts and bolts etc. Inspection: RDSO A)2V, 40 AH | — | 200.00 | — | — | |
| — | — | — | Above/ 382320.00 Below/P | ||
| Reset Box & All cards inside the Re- SET Box for HASSDAC (Make CEL),as per RDSO Specification No. RDSO/SPN/177/2012 (ver.3) or latest. Inspection: RDSO. | — | 20.00 | — | — | |
| — | — | — | Above/ 889710.60 Below/P | ||
| Supply of GG Tronic make Reset Box for HASSDAC make/brand GG Tronics.as per RDSO Specification no. RDSO/SPN/177/2012 (ver. 3) or latest make GG Tronic. Inspection: RDSO. | — | 20.00 | — | — | |
| — | — | — | Above/ 45955.20 Below/P | ||
| Supply of SITEL PRIMARY Cell(Dry, Leclanche) - 1.5 V shallnot be less than 45 AH as per Specification IRS:S- 95/96 Amd | — | 60.00 | — | — | |
| — | — | — | Above/ 105270.00 Below/P | ||
| Installation of magneto / control telephone, annunciator with all accessories and dry cells (2 nos.) For each phone with wooden battery box. This includes supply of magneto telephones with all accessories including supply of 2 nos. Dry cell for each telephone with wooden battery box. (i) SPEC.FOR magneto telephone IRS-TC- 79/2000.AMD-1 OR LATEST. A)Supply of magneto telephone, desk type, spec. No IRS-TC-79/ 2000 AMDT. 1 or latest. Inspection: by consignee | — | 30.00 | — | — | |
| — | — | — | Above/ 1499130.00 Below/P | ||
| "Electronic LC gate telephone systems with voice recorder a s p e r RDSO SPEC.NO.RDSO /SPN/TC/ 51/2011 R E V 4.0. Inspection-consignee. Material to be supplied from RDSO's approved source only with 03(three) years full warranty. Note: - 1) the date of manufacture of the item should be of current year at the time of supply to railway stores. 2)Installation by OEM" A)Supply of Master telephone with voice recording facility. Inspection : RITES. | — | 30.00 | — | — | |
| — | — | — | Above/ 156300.00 Below/P | ||
| "Electronic LC gate telephone systems with voice recorder a s p e r RDSO SPEC.NO.RDSO /SPN/TC/ 51/2011 R E V 4.0. Inspection-consignee. Material to be supplied from RDSO's approved source only with 03(three) years full warranty. Note: - 1) the date of manufacture of the item should be of current year at the time of supply to railway stores. 2)Installation by OEM" B)Supply of Gate (slave)te1ephone. Inspection : Consignee. | — | 30.00 | — | — | |
| — | — | — | Above/ 2152000.00 Below/P | ||
| Supply of unchanged Low Maintenance Lead Acid (LMLA) secondary cell, shelf mounting type conforming to RDSO Specn.No. IRS:5-88/2004 or latest with inter cell connectors, nuts and bolts etc. Inspection: RDSO A)2 V, 120 AH | — | 500.00 | — | — | |
| — | — | — | Above/ 58708.00 Below/P | ||
| SUPPLY & INSTALLATION OF ELEC. LIFTING BARRIER GATE SPARE PARTS AS PER RDSO SPECIFICATION RDSO/SPN/208/2012 VER. 2.0 OR LATEST. AND MATERIALS SHOULD PROCURED ON RDSO APPROVED FIRM OF M/s URBAN MAKE OR SIMILAR. INSPECTION : AUTHORISE REPRESENTATIVE OF Sr.DSTE/HWH. ROTARY SWITCH OF GATE PANEL | — | 50.00 | — | — | |
| — | — | — | Above/ 496125.00 Below/P | ||
| Gear box assembly with clutch Assembly for ELB confirming to RDSO spec. No> RDSO/SPN/208/2012 Ver. 2.0 Maker's. INSPECTION : RDSO | — | 15.00 | — | — | |
| — | — | — | Above/ 41080.00 Below/P | ||
| Supply of Power contractor/ Relay for motor 24V DC, MAKE L&T MLO/SIEMENS. The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver. 2.0 and Amendment 1 or latest. Inspection: Consignee. | — | 20.00 | — | — | |
| — | — | — | Above/ 266440.00 Below/P | ||
| Supply of PMDC MOTOR 24V DC, 90W/1500RPM.The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver.2.0 and Amendment 1 or latest. Inspection: Consignee. | — | 20.00 | — | — | |
| — | — | — | Above/ 49440.00 Below/P | ||
| "Supply of boom lock PMDC motor 24V DC/40W/1500RPM.The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver.2.0 and Amendment 1 or latest. Inspection: Consignee." | — | 20.00 | — | — | |
| — | — | — | Above/ 20000.00 Below/P | ||
| "Supply of TIMING BELT. The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver. 2.0 and Amendment 1 or latest. Inspection: Consignee." | — | 20.00 | — | — | |
| — | — | — | Above/ 123260.00 Below/P | ||
| "Supply of FRICTION CLUTCH SUB ASSEMBLY. The material will be as per RDSO Specn. No. RDSO/SPN/208/2012/Ver. 2.0 and Amendment 1 or latest. Inspection: Consignee." | — | 20.00 | — | — | |
| — | — | — | Above/ 26040.00 Below/P | ||
| Supply of Limit Switch Set for boom lock proving. The material will be as per RDSO Specn. No.RDSO/SPN/208/2012/Ver.2.0 and Amendment 1 or latest. Inspection: Consignee. | — | 20.00 | — | — | |
| — | — | — | Above/ 462202.16 Below/P | ||
| Supply of ELDYNE Make Serial I/O card for Eldyne Make Multi Section Digital Axle Counter MSDAC as per RDSO/SPN/176/2013 Ver.3 make Thales C/o Eldyne. Make Eldyne Electro System Pvt. Ltd. THALES make via ELDYNE. INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 117650.72 Below/P | ||
| Supply of ELDYNE Make PDCU as spares of Multi section digital axle counter (MSDAC) as per RDSO /SPN/176/2005 Make-Thales/ Eldyne Electro System Pvt. Ltd. INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 183296.48 Below/P | ||
| Supply of Power supply card type B (M181PSB-01) of MSDAC (Make-Medha). INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 28735.95 Below/P | ||
| Supply of Communication SPD (M181CSPD-01) of MSDAC (Make-Medha). INSPECTION : RDSO | — | 5.00 | — | — | |
| — | — | — | Above/ 215906.96 Below/P | ||
| Supply of Vital Input Card (M181VIC-01) For MSDAC MAKE MEDHA.INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 376934.48 Below/P | ||
| Supply of Vital Output Card (M181VOC-01) for MSDAC MAKE MEDHA. INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 425116.24 Below/P | ||
| Supply of MEDHA.INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | for | ||
| — | — | — | MSDAC | ||
| — | — | — | MAKE | ||
| — | — | — | Above/ 73004.24 Below/P | ||
| Supply of Top Back Plane Power Distribution (M181TBPD-01) for MSDAC MAKE MEDHA. INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 975321.92 Below/P | ||
| Supply of Central Evaluator Main CPU Card (M181CEC-01) MSDAC make Medha. Inspection: RDSO. | — | 4.00 | — | — | |
| — | — | — | Above/ 791850.80 Below/P | ||
| Supply of Central Evaluator modem CPU Card (CEMC Card) MSDAC make Medha(M181CEMC-01). INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 232030.48 Below/P | ||
| Supply of DP Modem card (M181DMC-01) of MSDAC (Make-Medha). INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 41753.12 Below/P | ||
| Supply of DP Control Card (M181DCC-01) of MSDAC (Make-Medha), Accepted Offer:- MAKE- MEDHA. INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 46492.00 Below/P | ||
| Supply of 24V EMI Filter (M181EMI-24) of MSDAC (Make-Medha), Accepted Offer:- MAKE- MEDHA. INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 184363.20 Below/P | ||
| Supply of Sensor Receiver coil (M180SRXC) of MSDAC (Make-Medha), Accepted Offer: MAKE MEDHA. INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 184363.20 Below/P | ||
| Supply of Sensor Transmitter coil (M180STXC) of MSDAC (Make-Medha), Accepted Offer- MAKE MEDHA. INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 938883.52 Below/P | ||
| Supply of DP Back Plane (M181DBP-01) of MSDAC (Make-Medha), Accepted Offer: MAKE- MEDHA. INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 90765.60 Below/P | ||
| "Supply of DP Control Card -36KHZ suitable for the existing MSDAC system of Medha make as per RDSO Spec:RDSO/SPN/176/2013 Version:3.0 . Accepted Make; MEDHA" INSPECTION : RDSO | — | 10.00 | — | — | |
| — | — | — | Above/ 201765.84 Below/P | ||
| "Supply of DP Modem Card suitable for the existing MSDAC system of Medha make as per RDSO Spec:RDSO/SPN/176/2013 Version:3.0 . Accepted Make; MEDHA" INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 938883.52 Below/P | ||
| "Supply of DP Mother Board (Back plane and enclosure) suitable for the existing MSDAC system of Medha make as per RDSO Spec:RDSO/SPN/176/2013 Version:3.0. Accepted, Make; MEDHA" INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 73632.00 Below/P | ||
| "Supply of Communication SPD suitable for the existing MSDAC system of Medha make as per RDSO Spec:RDSO/SPN/176/2013 Version:3.0 . Accepted Make; MEDHA" INSPECTION : RDSO | — | 10.00 | — | — | |
| — | — | — | Above/ 1196400.00 Below/P | ||
| SUPPLY OF SPARE TRACK SIDE ELECTRONIC UNIT (EAK-AzLM) SUITABLE FOR MSDAC SYSTEM OF ELDYNE MAKE. Make / Brand: Eldyne Electro Systems Pvt Ltd. INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 213344.00 Below/P | ||
| SUPPLY OF MOTHER BOARD FOR MSDAC PART NO-3CR01838A MAKE ELDYNE. INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 421840.00 Below/P | ||
| "Supply of SK 30 H DOUBLE RAIL CONTACT Receiver Coil(Rx ) with 5.5 meter integral cable for Eldyne make MSDAC with Complete Accessories as per RDSO /SPN/176/2003 with latest ammd-2 or similar suitable for THALES make axle counter. Make/Brand - ""Thales/Eldyne Makes/Brand - ""ELDYNE"" of M/s Eldyne Electro Systems Pvt Ltd." INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 756480.00 Below/P | ||
| "Supply of Wheel Sensor RSR 180 with 5m including protection tube and testing plate for MSDAC (4.8M) for Frauscher Make. ACCEPTED MAKE/BRAND : FRAUSCHER" INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 780522.80 Below/P | ||
| "Supply of Wheel Detection Sensor with 10 Mtrs cable suitable for SIEMENS make MSDAC.RDSO/SPN/176/2005. FIRM OFFER MAKE BRAND-SIEMENS IS ACCEPTED" INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 182400.00 Below/P | ||
| "Supply of Receiver Coil (Rx Coil) 21/25 KHz suitable for MSDAC of GG Tronics make as per RDSO Spec. RDSO/SPN/176/2013 Ver.-3 Firm's offer: Same as Above. Make/Brand: GGT." INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 182400.00 Below/P | ||
| "Supply of Transmitter Coil (Tx Coil) 21/25 KHz suitable for MSDAC of GG Tronics make as per RDSO Spec. RDSO/SPN/176/2013 Ver.-3 Firm's offer: Same as Above. Make/brand: GGT." INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 1309516.80 Below/P | ||
| "Various cards of MSDAC of (Sigma Model BO23)Micro Processor unit, Part No. AP215623 as per RDSO specification No. DSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO." INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 260827.20 Below/P | ||
| "Various cards of MSDAC of (Sigma Model BO23)Input Amplifier Module (UP), Part No. AP215629 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO" INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 313672.32 Below/P | ||
| "Various cards of MSDAC of (Sigma Model BO23)Relay Output Module (RE), Part No. AP215613 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO" INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 159328.32 Below/P | ||
| "Various cards of MSDAC of (Sigma Model BO23)Power Supply Protection Module (ZANAP), Part No. AP215625 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO" INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 420212.16 Below/P | ||
| "Various cards of MSDAC of (Sigma Model BO23)Power Supply Module (DC12), Part No. AP215624 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO." INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 135312.96 Below/P | ||
| "Various cards of MSDAC of (Sigma Model BO23)Lightning Protection Board (ZAG2Z), Part No. AP215633 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO." INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 548784.96 Below/P | ||
| "Various cards of MSDAC of (Sigma Model BO23)Wheel sensor ZK24-2 with 10 mtr cable & cable protection tube, Part No. AP215595 as per RDSO specification No. RDSO/SPN/176/2013 Ver.-3 & Manufacturers's Spec. or latest suitable with existing installations of MSDAC. Firms offered Make: ALTPRO." INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 757630.80 Below/P | ||
| "Supply of TX - RX Coil for MSDAC (Suitable for Siemens Make MSDAC) as per RDSO/SPN/176/2012 Ver 3.0 or Latest Each Set Having 1 RX + 1 TX Coil . Make: Siemens" INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 349135.00 Below/P | ||
| Supply of IPS SMR 11OV VC 2 0 Amp. a s per specification No. RDSO/ SPN/165/2012, version-3.0 or latest. Make: M/s. Statcon Ltd./ M/s. HBL Ltd./M/s. Amararaja Ltd. Or Other RDSO approved make, compatible for the IPS make specified by Purchaser. Inspection by Rep. of Railway Engineer. INSPECTION : RDSO | — | 5.00 | — | — | |
| — | — | — | Above/ 121755.00 Below/P | ||
| Supply of IPS DC-DC converter 24-32V DC, 5 Amp /10 Amp or 60-66 V DC, 5 Amp or 60-100V DC,1 Amp/ 3 Amp/S Amp as per specification No. RDSO/SPN/165/2012, version-3.0 or latest. Make: M / s . Statcon L t d . / M / s . H B L Ltd./M/s. Amararaja Ltd. Or Other RDSO approved make, compatible for the IPS make specified by Purchaser. INSPECTION : RDSO | — | 5.00 | — | — | |
| — | — | — | Above/ 136985.00 Below/P | ||
| Supply of IPS Transformer 220V AC/110V AC 1000 VA as per specification No. RDSO/SPN/165/2012, version-3.0 or latest. Make: M/s. Statcon Ltd./ M/s. HBL Ltd./M/s. Amararaja Ltd. Or Other RDSO approved make, compatible for the IPS make specified by Purchaser. INSPECTION : RDSO | — | 5.00 | — | — | |
| — | — | — | Above/ 406675.00 Below/P | ||
| Supply of IPS Inverter 1.5KVA / 2 KVA for IPS as per specification No. RDSO/ SPN/165/2012, version-3.0 or latest. Make: M/s. Statcon Ltd./ M/s. HBL Ltd./M/s. Amararaja Ltd. Or Other RDSO approved make, compatible for the IPS make specified by Purchaser. INSPECTION : RDSO | — | 5.00 | — | — | |
| — | — | — | Above/ 89680.00 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of Communication Card (COM-1 / 2) of High Availability SSDAC systems (HASSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 221876.16 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of CPU-1 Card for High Availability SSDAC & SSDAC systems (HASSDAC/SSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 221876.16 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of CPU-2 Card for High Availability SSDAC & SSDAC systems (HASSDAC/SSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 132069.16 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of PD-1 / 21 KHZ Card version 3 for High Availability SSDAC & SSDAC systems (HASSDAC/SSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 132069.16 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of PD-2 / 25 KHZ Card version 3 for High Availability SSDAC & SSDAC systems (HASSDAC/SSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 84524.24 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of Communication Card (COM-1 ) for SSDAC systems (SSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 84524.24 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of Communication Card (COM-2 ) for SSDAC systems (SSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 87165.64 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of Relay Drive Card (RD 1 / 2) of High Availability SSDAC systems (HASSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 87165.64 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of Relay Drive Card (RD 1 ) For SSDAC systems (SSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 87165.64 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of Relay Drive Card (RD 2 ) For SSDAC systems (SSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 174331.28 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of Event Logger Card for High Availability SSDAC & SSDAC systems (HASSDAC/SSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 211310.64 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC .Supply of DC-DC Converter for HASSDAC systems of High Availability SSDAC systems (HASSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 134710.52 Below/P | ||
| SUPPLY OF DIFFERENT CARDS OF G.G.TRONICS MAKE SSDAC / HASSDAC Supply of DC-DC Converter for SSDAC systems (SSDAC) AS PER RDSO/SPN/177/2012 or Latest Version GGTronics Make : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 208793.76 Below/P | ||
| SUPPLY OF WEB DETECTOR (EACH SET CONSIST OF 2 NOS OF TX COILS & 2 NOS RX COILS) FOR CEL MAKE SSDAC AS PER RDSO/SPN/177/2012 or Latest Version CEL Make. Length of cable: 5/10/15 m as per site requirement. : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 208793.76 Below/P | ||
| SUPPLY OF WEB DETECTOR (EACH SET CONSIST OF 2 NOS OF TX COILS & 2 NOS RX COILS) FOR GGT MAKE SSDAC AS PER RDSO/SPN/177/2012 or Latest Version GGT Make.Length of cable: 5/10/15 m as per site requirement. : INSPECTION : RDSO | — | 4.00 | — | — | |
| — | — | — | Above/ 1485018.00 Below/P | ||
| Fixing of Q series relay base plate/metal to metal relay mini group and major group base plate, laying, bunching, lacing, dressing & packeting of 60/40 core PVC indoor cable/flexible wire and termination of 60/40 core cable/flexible wire on tag block/base plate & base plates & soldering. This includes fuse wiring, bus bar looping etc. required for keeping installation ready for circuit wiring work & panel throughing work. The work shall be done as per approved plan, extant practice on ER & the instruction of Rly. Engineer at site. Inspection authority:- Consignee | — | 3798.00 | — | — | |
| — | — | — | Above/ 528200.00 Below/P | ||
| Digging of trench 1.2 Mtrs. deep from rail flange/ road level and 0.3 Mtrs to O.6 Mtrs wide and back filling after placing of DWC / RCC/GI pipe. (Placing of DWC/ RCC/GI pipe covered separately). The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. F o r track crossing, RDSO sketch No. SDO/CABLE LAYING/ 009 or latest and for Road Crossing, RDSO sketch No. SDO/CABLE LAYING/010 or latest are to be followed. | — | 1900.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
CheckListAnnexItoVIIIUPDATED.pdf Annexure I to VIII
ATTACHMENT
Annexure-IX.pdf
ATTACHMENT
Annexure-X.pdf
ATTACHMENT
Annexure-XI.pdf
ATTACHMENT
AnnexureV.pdf
ATTACHMENT
Annexure_VA.pdf
ATTACHMENT
Annexure-VIA.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
GCCwithCorrectionSlips1to10.pdf
ATTACHMENT
LabourCess.pdf
ATTACHMENT
VICINITYOFUNDERGROUNDCABLE- Pentalty for damages of cables
ATTACHMENT
TermsofPayment.July-25.pdf
ATTACHMENT
TENDER DOCUMENTS
ATTACHMENT
NewEarthElectrodeDrawing1.pdf
ATTACHMENT
EarthElectrodeC-36.pdf
ATTACHMENT
CheckListAnnexItoVIIIUPDATED.pdf
ATTACHMENT
JPO-CABLEDIGGINGWORK-VICINITYOFUNDERGROUNDCABLE-SRDSTESRDEN-C-240124.pdf
ATTACHMENT
Updatedtenderdocument-RELAYLED.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .