REPAIR AND MAINT OF UNSV INTERNAL WIRING SUBMAIN DBs MCB MCCBs INCL VARIOUS TYPES OF LED FITTING AND FIXTURES AND CONNECTED WORKS FOR OFFRS/JCO/OR MD ACCN AT ANAND PARBAT UNDER GE (NORTH) DELHI CANTT

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete excluding fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete

M&L for point wiring with single core FRLS, PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) casing caping/conduit pipe including replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :-

(a) One light point controlled by one switch

(b) One ceiling/exhaust fan point controlled by one switch

(c) One socket outlet 5 Amps controlled by one switch on same board

(d) One socket outlet 5 amps controlled by one switch on independent board

(f) One light point controlled by two two way switches

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic suitable size PVC conduit complete with all PVC conduit accessories suitable for modular type switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- (Note: 1. Rates deemed to be included for GI metal flush box reqd modulars size, Modular cover inner and outer plates, blanking plates etc complete 2. Modular switch, sockets, Bell push measured and paid separately under relevant items).

(a) One light point controlled by one switch

(c) One ceiling/exhaust fan point controlled by one switch

(d) One socket outlet 5 Amps controlled by one switch on same board

(e) One socket outlet 5 amps controlled by one switch on independent board

(f) One bell point controlled by one bell push switch

All as per above item No 8 description but 03/04 modules complete.

S&F in repair Switch piano flush type 5/6 Amps single pole one way 230 Volts complete.

S&F in repair two way switch piano flush 6 Amp single pole 230 volts complete.

S&F in repair Switch piano flush type 15/16 A single pole one way 230 Volts complete.

S&F in repair Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volt complete.

S&F in repair Socket Outlet 2 in 1, 3/6 pin 15 Amp flush type 230 Volts complete.

S/F in repair Bell push, flush type 5 Amps 230 Volts complete.

S&F in repair electronic dimmers flush type 120 watt, 230 Volt complete.

S&F in repair modular switch 6 Amps, one way, one module 240 volts complete.

S&F in repair modular socket, 3 pin 6 Amps,240 volts, 2 module complete.

S&F in repair modular switch 16 A, 1 module,240 volts complete.

S&F in repair modular socket 6/16 A, 5 pin, 2 module, 240 volts complete.

M&L in repair for two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area 1100 V,stranded FRLS copper conductor, multistranded, and one single core green PVC insulated 4 sqmm stranded FRLS copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete. Note :- 3 RM of 4 Sqmm and 01 RM of 20mm dia PVC condut shalll be measured as 01 RM.

All as per above item no 30 herein before but with 6 sqmm two runs and 6 sqmm one run as earth wire

S&F in repairs for MCB, DP/SPN, 240 Volts, AC, 40/63 Amps of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete.

S&F in repairs for MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete.

Takinng down loose and rearrange/refixing of perforated GI cable tray and refixing properly (150/300 x 50 x 2 mm) including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended or wall fixed from the ceiling etc suitable to accommodate PVC copper cables/PVC conduits with anchor, fasteners , mounting brackets, suspension rods complete all as specified and directed. (Note: Rates deemed to be included for removing of exist loose/hanging cables/conduits and rearrangement of complete in cable trays complete as per site requirement)

S & F in repair LED Batten type fitting for surface/wall mounted 20/22 W,230V,6500K integrated electronic driver completely pre wired, LED 4 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws , gutties etc.and removing the UNSV fitting and all as specified and directed.

S&F in repair indoor decorative wall light fixture suitable for 10 W LED lamp,230V for soft light ambiance, made up of polycarbonate, spiral B22 base lamp holder used,globe shape, incl LED lamp 10W(warm/CDL type) and remove the UNSV fittings and all as specified and directed. Make- Havells/Polycab/Philips

S&F lighting fixture wall mounted LED bulk head luminaire 9/10W,230V, made of die cast aluminium with opal diffuser IP 65, complete with mounting Brackets & accessories as required with connections and remove the UNSV fittings and all as specified and directed.

ITEM NO-99

S&F in replacement desert coolers side panels of size suitable of cooler body size (25"x25"x32") made out of 20 SWG MS sheet with wiremesh frame complete and grill duly painted with two coat synthetic enameled paint over one coat of red oxide inside complete all as directed.

S&F in replacement PVC flexible pipe of high density for 15 mm bore with necessary pvc bends,straights complete for desert cooler of any size all as directed.

M&L in replacement of Plug top, 3 pin, 05 amps, 230 volt.

M&L in replacement of Plug top, 3 pin, 15 amps, 230 volt.

ITEM NO-104

Rewinding of burnt winding of the cooler fan up to 500 mm dia with matching gauge and turns of superenamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed.

ITEM NO-106

M&L for taking down carefully and shifting of any other location (i.e.AOR) any type of AC units complete unit of capacity 1.5 Ton/2 Ton incl making of required size core cutting hole complete all as specified and directed.

ITEM NO-108

S&F in replacement of running capacitor 30 to 60 MFD, 240 volt including making connection incl taking down UNSV complete all as specified and directed .

S&F in replacement of relays suitable for air conditioner of any type1.5/2 Ton incl taking down UNSV complete all as directed . Makes as per sample

S&F in repairs for overload protection coil 230 Volts for any type AC 1.5 Ton/2.0 Ton capacity ISI marked complete all as specified and directed.

S&F in replacement of thermostate switch of temperature range of 18C°to 30 C° ISI marked suitable for window/split air conditioner of any make/type of capacity 1.5 Ton/2 Ton all as directed.

M&L for fan blower motor copper wound of window/split type air conditoner 1.5/2 Ton capacity with same rating 220/230 volts incl taking down UNSV complete. Makes as per sample

S&F for swinging/Oscillation motor with louvers (horizontal and vertical) as per existing make for any type AC 1.5 ton/2.0 ton capacity including taking out old unserviceable swinging motor ISI marked complete all as specified and directed.

S&F for fan blade for any type AC of any capacity including taking down old unserviceable fan blade all as specified and directed by Engr-in-charge.

ITEM NO-116

S&F for replacement of PVC air filter for any type AC of 1.5 ton/2.0 ton capacity including taking out old unserviceable air filter ISI marked complete all as specified and directed.

S&F in repairs suitable capacity/model condensing coil unit copper for any type AC 1.5 Ton/2 Ton capacities, ISI marked, incl taking down UNSV complete all as specified and directed by Engr-in-Charge.

M&L for replacement of high quality puf insulation of suitabel size of around the copper tubings complete all as specified.

M&L for replacement of hermatically sealed reciprocating/rotary type (as per existing) compressor unit complete for split/Window AC 1.5/2Ton with charging of refrigerant incl taking down UNSV complete.

S&F in repairs for Printed Circuit Board for control unit for any type and any model of Ac 1.5 ton /2.0 ton capacity as per existing and same make ISI marked complete all as specified and directed.

S&F in replacement of front grill of window type air condition 1.5/2 Ton any make/type with LCD/LED display panel, incl taking down UNSV complete all as directed.

S&F in repairs for split AC indoor unit mounting plate suitable for 1.5/2 ton capacity complete.

S&F in repairs for liquid/gas shut-off /receiver valve suitable for any type of AC s complete.

S&F in repairs for split AC out door unit mounting bracket (set of 2) suitable for 1.5/2 ton capacity complete.

Supply and fix refrigerator, electric driven (single phase), capacity 310 L or near by BEE 5 star rated and old unsv refrigerator deposit to MES store yard all as directed

Supply and fix water cooler electric driven (single phase), having approx storage capacity of 40 litre and nominal cooling capacity of 40 Litres per hour. and old unsv water cooler deposit to MES store yard all as directed

Supply and fix refrigerator, electric driven (single phase), capacity 195 L or near by BEE 5 star rated and old unsv refrigerator deposit to MES store yard all as directed

Excavation in trenches not exceeding 1.5 mtr depth width and not exceeding 1.5m depth for laying under ground cable/pipes in loose/soft soil all as specified and directed.

ITEM NO-130

Removal of surplus soil obtained from excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

Supply and laying galvanised steel water tubing medium grade ISI marked screwed socketed joints complete with all tube fitting (such as bends,elbow,tees,short pieces,connectors,caps,plugs and unions,etc) and fixing complete with clips,wall hooks wooden plugs,or laying in trenches,etc.,also cutting,screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting etc of following sizes:-

ITEM NO-132.01

ITEM NO-132.02

ITEM NO-132.03

ITEM NO-132.04

ITEM NO-132.05

ITEM NO-132.06

(g) 15 mm dia

Supply and fixing gunmetal gate valve screwed down high pressure with iron wheel head ,screwed both ends for iron pipe with necessary fittings including taking out unserviceable valve for the following sizes:-

ITEM NO-133.01

ITEM NO-133.02

ITEM NO-133.03

ITEM NO-133.04

(e) 15 mm dia

Supply and fix PP-R polypropylene random copolymer concealed pipes SDR 7.4(PN 16) stabilised and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc including necessary fittings, fixtures and fixing material etc including taking out unserviceable pipe complete all as specified and directed of following sizes (outer dia):- (Note:- laying of pipe line on wall/floors/terrace of high raise buildings up to the 8 th floor by using with suitable clamps, jointing material and necessary accessories and T&P complete necessary arrangement like scaffolding to carry out the work).

ITEM NO-134.01

ITEM NO-132.02

(c) 32 mm dia

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and 1.5 ton of capacity and old UNSV AC's deposit in E/M store yard complete all as directed. (Make: llyod, LG, Voltas, Carrier, Hitachi)

Supply, laying, jointing and testing ductile iron pipe with spigot and socketed ends conforming to IS 8329 with inside cement mortar lining laid in trenches of 150 mm bore incl taking down unsv complete all as specified and directed (Note : Excavation and earth work, fittings and joints shall be measured and paid for seperately)

ITEM NO-136

ITEM NO-137

ITEM NO-138

ITEM NO-139

ITEM NO-140

ITEM NO-141

(g) 15 mm dia

Supply and laying galvanised steel water tubing medium grade ISI marked screwed socketed joints complete with all tube fitting (such as bends,elbow,tees,short pieces,connectors,caps,plugs and unions,etc) and fixing complete with clips,wall hooks wooden plugs,or laying in trenches,etc.,also cutting,screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting etc of following sizes:-

M & L for cast iron sluice valve of pressure class PN-1.6 type flanged and drilled at both ends, conferming to ISI mark and having gun metal spindle and rings including wheel for operating all as specified including two numbers flanged socket and jointing materials such as bolts, nuts, washers, rubbers/ fibre board gasket including taking down old unserviceable valve from pipe line of both ends complete all as specified and directed for the following dia of bore:-

ITEM NO-143.02

ITEM NO-143.03

(g) 15 mm dia

Supply and laying galvanised steel water tubing medium grade ISI marked screwed socketed joints complete with all tube fitting (such as bends,elbow,tees,short pieces,connectors,caps,plugs and unions,etc) and fixing complete with clips,wall hooks wooden plugs,or laying in trenches,etc.,also cutting,screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting etc of following sizes:-

M & L for cast iron sluice valve of pressure class PN-1.6 type flanged and drilled at both ends, conferming to ISI mark and having gun metal spindle and rings including wheel for operating all as specified including two numbers flanged socket and jointing materials such as bolts, nuts, washers, rubbers/ fibre board gasket including taking down old unserviceable valve from pipe line of both ends complete all as specified and directed for the following dia of bore:-

ITEM NO-143.02

ITEM NO-144.02

(g) 15 mm dia

Supply and laying galvanised steel water tubing medium grade ISI marked screwed socketed joints complete with all tube fitting (such as bends,elbow,tees,short pieces,connectors,caps,plugs and unions,etc) and fixing complete with clips,wall hooks wooden plugs,or laying in trenches,etc.,also cutting,screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting etc of following sizes:-

M & L for cast iron sluice valve of pressure class PN-1.6 type flanged and drilled at both ends, conferming to ISI mark and having gun metal spindle and rings including wheel for operating all as specified including two numbers flanged socket and jointing materials such as bolts, nuts, washers, rubbers/ fibre board gasket including taking down old unserviceable valve from pipe line of both ends complete all as specified and directed for the following dia of bore:-

ITEM NO-143.02

ITEM NO-145.02

ITEM NO-145.04

M&L for bailing out the water from the semi underground/UG sump/OH tank up to 15 mtrs staging capacity upto 60,000 GLNS with out causing any interruption to regular water supply system and cleaning the same walls, roof and floor thoroughly by using wire brush/scrapper for removal of deposited scales/sludge/silt etc and removing the materials out of site cleaning thoroughly with water and bleaching powder and then by chlorine solution for complete anti bacterial disinfections with applying one coat of white wash inner and outer side including writing date of cleaning on the black board with white paint all as specified and directed (Note:- Rates quoted deemed to be inclusive of T&P and safety equipments required at site)

Each Job

Supply and filling of Calcium hypochlorite 65% to 70% chlorine content in granual form(calcium based granular disinfect for water treatment) packed in 45 kgs each drum. Make- Purichlor of Sree Rayalseema Hi strength hypo Ltd.

ITEM NO-150

Supply and filling of common salt (as per sample at site) using for regeneration process in water softner plant complete all as specified and directed.

ll as directed (Note : MS work will be paid measured & paid seperately)

M&L for wiremesh frame including necessary clamp arrangements for suitable bore of 100/150mm vent pipes for semi UG sumps in all as specified and directed.

ITEM NO-155

ITEM NO-156

M&L for Rotational moulded polye- thylene water storage tanks 5000 Ltrs capacity for treated water(cylindrical vertical with closed top) hoisted and fixed in position incl taking down unsv complete all as specified and directed.

S&F in repairs for 'Y' shape stainless steel strainer avoid foreign material to pass through meter suitable for 100 mm dia pipe including all fittings and fixtures all as specified and as directed.

All as per above item no 158 but 150 mm dia.

ITEM NO-160

ITEM NO-161

M & L for Cutting of road/path for laying of pipe line and making the good to disturbed road/ path including provision of PCC 1:2:4 type B-1 using 20mm graded stone aggregate all as specified

S&F in repairs for CI bulk water meter mechanical type class B, conforming to IS-4064, suitable for 100 mm dia pipe including all fittings and fixtures all as specified and as directed.

All as per above item no 163 but 150 mm dia.

S&F in replacement of water pressure gauge with black steel case, copper alloy wetted parts, snap-in- acrylic window with white plastic dial and plastic pointer having 0-20 kg/cm2 pressure range incl taking down UNSV complete all as specified & directed (Make-Cummins/Kirloskar/WIKA/H guru)

S&F in replacement of water pressure gauge with black steel case, copper alloy wetted parts, snap-in- acrylic window with white plastic dial and plastic pointer having 0-14 kg/cm2 pressure range incl taking down UNSV complete all as specified & directed (Make-Cummins/Kirloskar/WIKA/H guru)

M&L for spray Painting of complete Water Pumpset of cap any type up to 25 HP with one coats of synthetic enameled paint of specified colour after preparation of surface and writing letters and numbers complete all as specified and directed.

ITEM NO-167

ITEM NO-168

(a) 50 mm bore

(b) 80 mm bore

(c) 100 mm bore

(d) 150 bore

(e) 200 bore

ITEM NO-169.05

ITEM NO-169.06

(a) Spindle SS

(b) Check nut gunmetal.

(c) Gland ring with packing

(d) T nut and bolts

ITEM NO-169.05

ITEM NO-169.06

(a) Spindle SS

(b) Check nut gunmetal.

ITEM NO-171.01

ITEM NO-171.03

(e) Gate

M&L for PCC (1:3:6) type C1, (Using 20 mm graded aggregate) as in foundations, flooring and coping filling and mass concrete with cement plastering finishing incl dismantling complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, with cement motor 1:6 straight or curved on plan exc 6m mean radius built in incl necessary earth work incl dismantling complete all as specified and directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6 to be finished even and smooth without using extra cement complete all as specified and directed.

S&F in repairs for informatory/eqpt history sign boards of size not less than 900 x 600 mm rectangular type with 2mm thick MS sheet plain type made out of angle iron channels frame, back ground and epqt history with high intensity prismatic reflective tape as specified colours (blue and white) complete all as specified and directed.

ITEM NO-176

M&L for flushing & developement of bore well of any capacity and size at the pressure 10 kg/sqcm to 15 kg/sqcm by diesel engine driven air compressor of capacity 620 cfm, depth up to 200 mtrs with using air pipe and connected items to improve the yield of tube well as specified and directed. [Note: (a) Rates included for Transportation of air compressor along with tools and accessories at differenet locations in AOR. (b) Lifting/lowering of borewell shall be measured and paid separately]

Per Hour

ITEM NO-178.02

ITEM NO-179

Supply only coupling bush for submersible pump and motor.

Supply only sand guard for any make of pump.

Supply only GM impeller for submersible pump any make of 12.5/7.5/5 HP capacity.

Supply only gland packing with wire rope 1/4 " 1/2".

Supply only rubbe

ITEM NO-185

ITEM NO-186

ITEM NO-187

ITEM NO-188

S&F in replacement of fully automatic star-delta starter in exist LT Panel with necessary rating contacotrs, OLR for rating 15 to 30 HP any type of motors and pump sets incl with necessary wiring in exist panel complete all as specified and directed. (Make/model- as per sample)

S&F in replacement of fully automatic star-delta starter in exist LT Panel with necessary rating contacotrs, OLR for rating 75 HP any type of motors and pump sets incl with necessary wiring in exist panel complete all as specified and directed. (Make/model- as per sample)

S&F in replacement 3 pole power contactor for starter with suitable size copper wiring, copper thimbles incl taking down old one complete all as specified and directed of the following capacity(Makes/Model- as per sample) :-

ITEM NO-191.01

ITEM NO-191.02

ITEM NO-191.03

ITEM NO-194.04

ITEM NO-192

ITEM NO-193

ITEM NO-194

ITEM NO-195

ITEM NO-196

S&F 0-100 Amp ammeter, digital type including taking down old one complete all as directed.

Flat iron clamps of size 50 mm x 6 mm (set) for fixing the 50 mm dia GI delivery pipe of submersible pump including 04 Nos 12 mm x 90 mm long SS bolts, nuts and washers complete all as specified and directed.

Set of Two

Fabricate supply and fix top cover for bore well in two half sections with fixing arrangement, nut & bolts with an accessibility of pump delivery pipe, including one coat of epoxy primer and two coats of epoxy paint complete made out of 3.15 mm thick MS CR sheet complete all as specified and directed.(Note:- Provision should be made to allow colum pipe of dia 50/80mm).

Supply and fixing MS tubing heavy duty (Class -C) column pipe, 80 mm bore 3 mtrs long conforming to IS-1239 coupled with heavy duty suitable size of MS flanges 12mm thick duly welded on both sides as directed including necessary SS nut and bolts with washers & rubber packing required at site condition and lowered in to the bore well complete all as specified and directed.(length of each column pipe shall be in 3 Mtrs complete) (Note : - Taking out and lowering of submersible pump set shall be measured and paid under respective item)

ITEM NO-202

All as per above item no 202 but size of pipe 50mm bore

Taking up existing CI/ DI Pipe water mains incl fittings and relaying, jointing and testing of same in to trenches in position after cleaning and removal of scale/blockage complete for the following sizes (Note - Earth work, Lead joint and rubber tyton joints shall be measured and paid separately under relevant items) :-

ITEM NO-204.01

(b) 100 mm bore

(b) 150 mm bore

M&L for Disconnection electrical and water connection of the centrifugal pump and motor with base plate and transported to work shop opening carefully and replacement of bushes, gland packing, ball bearing, rubber gasket nut and bolt fixing the require new parts (parts such as shaft, impellor, coupling & bearing shall be supplied under relevant item of schedule balance reqd spares rates included in item quoted rate complete ) and complete re-fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the following size/ capacity of motors. Note :- Rate includes transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning.

ITEM NO-205.01

ITEM NO-205.02

(b) 100 mm bore

ITEM NO-205.03

ITEM NO-205.04

ITEM NO-206.01

ITEM NO-206.02

(b) 100 mm bore

ITEM NO-205.03

ITEM NO-205.04

ITEM NO-206.04

ITEM NO-207.01

(b) 100 mm bore

ITEM NO-205.03

ITEM NO-205.04

ITEM NO-206.04

Supply only MS coupling suitable for centrifugal pumps for the following sizes.

(b) 100 mm bore

ITEM NO-205.03

ITEM NO-205.04

ITEM NO-206.04

Supply only bearing suitable for centrifugal pumps for the following sizes.

ITEM NO-209.01

ITEM NO-209.03

M&L for rewinding of electrical motor with super enameled copper winding wire of suitable size not less than original after cutting and taking out old winding complete with all insulation material such as Colton top varnish etc of centrifugal pump set motor all as specified and directed for the following sizes. Note :- Rate for transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning is paid under item NO 202.

ITEM NO-205.01

M&L for Disconnection electrical and water connection of the induction motor/self priming set/high pressure pumps/monoblock pump sets up to 3 HP with base plate and transported to work shop opening carefully and replacement of bushes, gland packing, ball bearing, rubber gasket nut and bolt including two coat of synthetic enameled paint over a coat of red oxide primer,shaft impeller and coupling bearing,replacement of burnt out winding and complete re-fixing its in original position and making out all electrical and water connection and testing complete all as specified and directed for the following size/ capacity of motor. Note :- Rate includes transportation of motor from the place of installation for repairing and reinstalling the same on existing foundation & testing & commisioning.

Comprehensive maintenance inclding preventive and periodical maintenane of Sand Filter Media (Flow rate capacity 35 Cum/Hr - 04 Nos) and Softner Plant (Flow rate capacity 30 Cum/ Hr - 04 Nos) with connected motors, UPVC pipe lines, butterfly valves etc., (Make of plant - Ion Exchange(I) Ltd,) installed at De

ITEM NO-212

Supply and fixing in reapirs of multi port valves/butter fly valves 100mm dia fixing at sand filter and softner plant vessles complete all as specified & directed.

Taking down ceiling fan of any sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser,flexible connection wire,down rods, canopies,minor spares and painting all as specified and directed. (Note : Rubber Bush, Gun Metal Bush, bearing,capacitor, twin core twisted copper flexible wire, down rods, canopies, winding and paintng are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included)

Rewinding of burnt winding from the stater of the ceiling fan any sweep with matching gauge and turns of super enamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed.

Painting of ceiling fan with set of blades of any sweep complete with one coat of 1st grade quality synthetic enamel paint by spraying including preparation of old painted surfaces to remove any type of sticky dust, oil marks etc and filling cavities with fillers and writing letters and numbers complete all as specified and as directed.

Taking down Exhaust/Ventilation fan of any sweep by unscrewing nut/bolts from its position (high rise bldgs up to 8 storey height) and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser,flexible connection wire,louvers,shutters,painting,minor spares and re-winding all as specified and directed. (Note : Rubber Bush, Gun Metal Bush, bearing,capacitor, ventilation fan motors,twin core twisted copper flexible wire, Louvers,shutters, winding and paintng are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included)

Rewinding of burnt winding of the Exhaust fan any type up to 300 mm dia with matching gauge and turns of superenamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed.

All as per above item no 219 but 380/450mm Sweep.

Painting of exhaust fan of any sweep complete with one coat of 1st grade quality synthetic enamel paint by spraying including preparation of old painted surfaces to remove any type of sticky dust, oil marks etc and filling cavities with fillers and writing letters and numbers complete all as specified and as directed.

Taking down pedestal/wall mounted fan of any sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser,if any spares,flexible connection wire and re-winding all as specified and directed. (Note : Bush, bearing,capacitor, twin core twisted copper flexible wire and winding are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included)

Rewinding of burnt winding from the stater of the pedestal/wall mounted fan any sweep with matching gauge and turns of superenamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed.

Supply only for ball bearing number of 6201 to 6204 as required. (Make : SKF/NBC).

Supply only for rubber bush for shackle with bolt, nut and lock pin suitable for ceiling fan .

Supply only for PVC holder for condenser housing.

Supply only for twin twisted copper flexible wire size of up to 1 sqmm.

Supply only capacitor 0.8/1 Mfd, 240 Volts.(Make/Model- as per sample)

Supply only capacitor 2.5&3.5 Mfd, 240 Volts.(Make- Tibcon/Havells/Epico)

Supply only PVC canopy for ceiling fan

Supply only down rod for ceiling fan 1' length, down rod colour match with exist fan to any height complete all as directed.

All as per above item no 230 but 2' length.

Supply only for ventilation fan motors copper wounded suitable for 200/250mm sweep complete.

ITEM NO-233

ITEM NO-234

ITEM NO-235

All as per above item no 235 but 1400 mm sweep.

S&F in replacement louvers with shutter metallic body suitable for single phase 240 Volts AC heavy duty exhaust fan upto 450 mm sweep with necessary fixing accessories after taking down existing all as specified and directed. NOTE: Louver Shutter are to be replaced up to high rise bldgs 8 storey including all necessary T&P and fixing accessories etc.

S&F in replacement louvers with shutter plastic body suitable for single phase 240 Volts ventilation fan 200 mm sweep with necessary fixing accessories after taking down existing all as specified and directed. NOTE: Louver Shutter are to be replaced up to high rise bldgs upto 8 storey, including all necessary T&P and fixing accessories etc.

M&L for exhaust fan blade (metal body) suitable for 300/380/450mm sweep for exhaust fan complete all as directed. (Make as per sample)

M&L for ventilation fan blade (PVC type) suitable for 200mm sweep complete all as directed. (Make as per sample)

M&L for wall/stand fan blade (PVC type) suitable for 300mm sweep complete all as directed. (Make as per sample)

Taking down carefully electric geyser of any type and capacity by disconnecting electric and water supply connection, opening nu

ITEM NO-242

ITEM NO-243

ITEM NO-244

ITEM NO-245

ITEM NO-246

ITEM NO-247

ITEM NO-248

ITEM NO-249

ITEM NO-250

ITEM NO-251

ITEM NO-252

ITEM NO-253

ITEM NO-254

ITEM NO-255

ITEM NO-256

ITEM NO-257

ITEM NO-258

ITEM NO-259

ITEM NO-260

ITEM NO-261