Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹15.5 LAccepted-AOC | L-1 | Accepted-AOC Accept | |
| 2 | L-2₹16.2 L+₹70,608.41 (4.56%)Rejected-Finance | L-2 | Rejected-Finance High rates | |
| 3 | L-3₹17.8 L+₹2.3 L (15.1%)Rejected-Finance | L-3 | Rejected-Finance High rates | |
| 4 | L-4₹19.5 L+₹4.0 L (26.1%)Rejected-Finance | L-4 | Rejected-Finance High rates | |
| 5 | L-5₹22.6 L+₹7.1 L (46.0%)Rejected-Finance | L-5 | Rejected-Finance High rates |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
16 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (MCTE)
GE (MCTE) Mhow (MP) 453441
RAPAIR/ MAINT AND IMPROVEMENT OF LT SYSTEM AT WESTERN AREA UNDER GE (MCTE) MHOW
2024_MES_641565_2
GE(MCTE)/MHOW/48(T) OF 2023-24
Open Tender
Electrical and Maintenance Works
Works
180 days
GE (MCTE) Mhow
As per tender document
9 documents required · 9 mandatory
₹500
Yes
GE (MCTE) Mhow
₹40,000
Yes
6 May 2024
26 Feb 2024
18 Mar 2024
26 Feb 2024
16 Mar 2024
3 Mar 2024
Amount
Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard dense soil for poles, cables, stay etc and getting out complete all as specified and directed.
All as per item No.1 above but depth exc 1.50 m and not exc 3.0m deep.
Returning filling in any type of soil in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.
Removing surplus excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.
M&L for filling approved fine river sand in trenches as in cable cushion to the full width of excavated trench, under and over cable complete all as specified and as directed. Note : Punned thickness of sand shall be measured.
M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection all as specified and directed.
Taking down damaged PCC/ steel pole/ strut of any size all as specified and as directed.
S&F steel tubular electric pole, swaged type, welded, type 410 SP-31 (9m long) erected to truly vertical position complete with CI base plate, finial taper plug, bolts, nuts & screws complete all as specified and as directed including painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block/ concrete with two coats of aluminium paint over a coat of red oxide zinc chrome primer including preparation of surfaces and making 30 cm wide five alternate strips with black and yellow paint above GL/plinth with synthetic enamel paint including marking pole number with black paint complete all as directed. Note : Earth work and PCC work shall be measured & paid for separately under respective item of this scheduale.
S&F GI tubing, light grade, 80mm bore pipe laid in trenches/ duct or in road crossing or fixed to wall/ poles for protection of cable complete all as specified and as directed.
All as per item No.09 above but 50mm bore.
All as per item No.09 above but 40mm bore.
Taking out old unserviceable underground cable armoured with aluminium conductor of any size from trenches, walls or ducts complete all as specified and as directed.
Supply & Laying XLPE insulated, armoured, electric cable with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection complete all as specified and as directed, of the following sizes:-
10 Sqmm 2 core.
16 sqmm 4 core
25 Sqmm 3.5 core
35 Sqmm 3.5 core
50 Sqmm 3.5 core
70 Sqmm 3.5 core
95 Sqmm 3.5 core
120 Sqmm 3.5 core
150 Sqmm 3.5 core
185 Sqmm 3.5 core
240 Sqmm 3.5 core
S&F in replacement of aluminium lugs including testing complete of the following sizes :-
6mm dia
10mm dia
16mm dia
25mm dia
35mm dia
50mm dia
70mm dia
95mm dia
120mm dia
150mm dia
185mm dia
240mm dia
300mm dia
400mm dia
M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in base of the pole, complete all as specified and as directed.
M&L for PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in foundation for poles, complete all as specified and as directed.
M&L for PCC 1:2:4, type B1 ( using 20mm graded crushed stone aggregate) as in base, coping of the pole, complete all as specified and as directed.
S&F MCCB, TPN, fixed type, thermomagnetic release, 415 Volts, including taking out old unserviceable MCCB of any type and make complete of the following sizes:-
40 Amps 16 kA
63 Amps 16 kA
100 Amps 16 kA
125 Amps 26 kA
150 Amps 26 kA
200 Amps 26 kA
250 Amps 26 kA
320 Amps 36 kA
400 Amps 36 kA
Taking down unserviceable/ burnt out MCB from existing LT Panel board duly disconnected all electrical connection & Supply and fixing new MCB SP 6-32 Amps, incl making necessary cable connection complete all as specified and directed.
Taking down unserviceable/ burnt out MCB from existing LT Panel board duly disconnected all electrical connection & Supply and fixing MCB 63 Amps TPN, incl necessary cable connection complete all as specified and directed.
Supply & fixing 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtrs apart incl 4 sqmm twin core flat/circular cable.
All as per item No.55 above but 6 Sqmm 2 core
All as per item No.55 above but 10 Sqmm 2 core
S&F in repalacement of insulator shackle type, porcelain, vitreous, white or brown or green for LT, 1100 volts grade including galvanised mild steel strip of section 30mm x 5mm and insulator bolts 14mm dia with washers & nuts, 100mm height & 115mm (max) dia complete all as specified & as directed.
S&F in repalacement of insulator pin type, porcelain, vitreous, white or brown insulator including one galvanised mild steel spindle, two galvanised iron washers & one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volts grade complete all as specified & as directed.
M&L for providing under ground boring using mechanical pneumatic drilling equipment for passing electric cables through by providing GI pipe of 50mm dia bore light grade, under the existing bituminous/ WBM road/ PCC hard standings, depth range not more than 1.5m deep and making good the distrubed surfaces to match with its existing specifications complete all as specified and as directed. Note : Any damage to the existing cables/ water pipes/ structures shall be made good by the contractor at his own expense and nothing extra shall be paid on this account.
S&F in replacement Solar LED light fitting 24 watt with high efficiency All-In-One Solar street light Mono Crystel, Lithium Ferro Phosphate battery with in-built BMS technology, MPPT Solar Charge controller and aluminium extruded body with PIR motion sensor automatically control the dimming and brightness of light, battery capacity 30AH, IP65, temp 5700K complete all as directed.
Cutting the existing bituminiuos road for passing of UG cable in road crossing and making good the disturbed surface of road to its original specification complete all as directed.
Supply and fixing cable route indicator, made out of MS sheet of size 200mm x 150mm x 3mm thick, spot welded with angle iron of size 40mm x 40mm x 5mm thick, 750mm long embedded in PCC (1:2:4) type B-2( using 40mm graded crushed stone aggregate) block 30cm x 30cm x 40cm in ground including one coat of synthetic enamel black paint over one coat of red oxide zinc chrome primer and writing with white paint showing size of cable HT/ LT complete all as specified & as directed.
Cutting, trimming and prunning of trees/ tree branches of any girth upto 2.5m all around existing LT over head lines/ sourrounding street light and flood light fitting including cleaning the area beneath the LT overhead lines and removing the debris from the site and depositing where directed complete all as specified.
Cleaning and upkeeping the area including uprooting of shrubs/ grass and removing creepers from fencing or poles/ posts and brooming the complete area of sub station around panels, transformers, four pole structures etc upto 3 feet from fencing or pole externally, all around complete and maintaining the same during currency of contract period, removing the debris to a distance not exc 50m and depositing where directed complete all as specified. Note : The payment shall be made one time and nothing extra shall be admissible to upkeep the area during currency of the contract period. The cost of brooms, showels, pick axe etc shall deemed to be included in the rate quoted by tenderer.
Taking down old unserviceable capacitor of any capacity and replace with new Duca Power XD capacitor, withstand Harmonic overloads upto 4 Amp Max current, low losses 0.2 watt/ KVAR, three phase, temperature range (-)25 degree centigrate to 70 degree centigrate of the following rating :-
(a) 5 KVAR
(b) 10 KVAR
(c) 25 KVAR
Taking down old unserviceable power contactor of any capacity and replace with new contactor three phase of the following sizes:-
(a) Contactor for capacitor heavy duty 3 pole with AC coil 1NO 0NC 25 Amps.
(b) Contactor for capacitor heavy duty 3 pole with AC coil 1NO 1NC 40 Amps.
(c) Contactor for capacitor heavy duty 3 pole with AC coil 1NO 1NC 95 Amps.
Taking down old unserviceable Harmonic Block Reactors for Detuned System for any capacity and replace with new Harmonic Block Reactors for Detuned System for 50 KVAR capacitor, three phase copper wound with an iron core and air gap, highest quality material, high class insulation, filtering factor 7% all as directed.
Sppply & Laying, armoured, electric copper cable of size 25 sqmm 1 core with multi stranded copper conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes & making necessary connection complete all as specified and directed.
S&F in replacement of copper lugs including testing complete of following sizes :-
(a) 10mm dia
(b) 25mm dia
Taking down old UNSV fuse assembly any capacity and replaced with new DIN fuse base assembly fixed type suitable for 100 Amps all as directed.
Taking down old UNSV fuse any capacity and replaced with new DIN type HRC fuse 415 volts suitable for 100 Amps all as directed.
M&L for earthing complete with GI steel earth plate electrode 60cm x 60cm x 6.0mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32 x 6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) pre-cast RCC (1:2:4) type-B-1, cover slab 30cm x 30cm x 10cm with one lifting handle made out of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, including necessary excavation and earth work in any type of soil complete all as shown in electrical plate No.3 of MES schedule Part-I and testing after completion.
Supply and errecting LT Panel outdoor type mounted and fixed with PCC foundation, made out of MS sheet factory assembled & factory fabricated out of 3.15mm thick sheet steel with suitable size MS angle frame duly spray painted with two coats of gray synthetic enamel paint over one coat of red oxide zinc chrome primer after preparatiion of surface, with required civil works & with and including 4 Nos aluminium bus bars 600 Amps with suitable size porcelain insulators & wiring with copper cable of suitable size, connecting including indicating lamp LED type for each phase, incl inbuilt industrial type locking arrangement, front operated and back openable incl necessry arrangement for fixing with suitable clamps, nuts & bolts etc. The panel pre wired with PVC insulated copper conductor danger notice board, feeders marked, and testing & commissioning, size of panel 2' x 2' x 1' complete all as directed.
SAHYOG ELECTRIC
Vinayak Trading House
AGARWAL BUILDERS
MODI CORPORATION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .