CERTAIN MISC BR REPAIRS PERIODICAL SERVICES COMPOUND WALL AREA DRAINAGE SEWAGE SYSTEM IN CDA RESIDENCE BLDGS AND OFFICE COMPLEX OF CDA CHENNAI UNDER GE CHENNAI

Amount

Excavating in trenches in hard /dense soil n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation, manhole, sewage line etc., not exceeding 10sqm on plan and getting out complete all as specified and directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick each layer complete all as specified and directed.

Removing excavated material/ soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.

Precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manholes cover slabs/ OHT base slab on roof and set in cement mortar (1:6) including demolition of old cover/ base slabs complete all as specified and directed.

Brick work with fly ash bricks (old size) straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

Granite slab of 18 - 20mm thick machine cut (of any type), laid over and including 20mm thick cement screed bed in cement mortar (1:6), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in platforms/ cooking platforms including cutting and polishing etc., complete all as specified and directed.

Rounding to edges of stone slabs, such as in steps, cooking platform and other similar situations all a specified and directed.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings n. exc. 1.5 Sqm each including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description along with fittings exc. 1.50 Sqm but n. exc. 4.00 Sqm each including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each including all fittings complete all as specified and as directed.

2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two No. 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling and providing 100mm long MS screws with PVC fasteners complete all as specified and directed.

Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton shutters 35mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (a) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and as directed.

40mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both side complete all as specified and directed.

Aluminium anodised barrel tower bolt of extruded section 100mm long all as specified and as directed.

Aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and as directed.

Aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

Mild steel butt hinge, medium weight cold rolled 100mm size all as specified and as directed.

Stainless steel cabinet hinge/ self-closing hinge/ auto hinge complete in repairs all as specified and directed.

Extruded aluminium alloy handle cast type anodised 100mm size all as specified and directed.

Extruded aluminium alloy handle cast type anodised 150mm size all as specified and directed.

Floor door stopper, 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

Floor door stopper, 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring in repairs fixed in floor all as specified and directed.

75mm size, 4 lever grade 1 brass lock for drawer, cupboard shutter etc. repairs all as specified and directed.

Aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples complete all as specified and directed.

All as per item No. 27.00 above but fixed in repairs.

Aluminium (die cast body) door closer hydraulically regulated designation No. 1 universal type suitable for door shutters upto 700mm in width and of weight not more than 35 kg and fixed complete in repairs all as specified and as directed.

Mild steel mortice lock vertical type 4 levers of size 100mm with stainless steel handle set suitable for right or left, inside or outside for opening doors fixed with brass screws complete in repairs all as specified and as directed.

Aluminium powder coated designer curtain rods (draw berms rods) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws including taking down the existing curtain rod of any description complete in repairs all as specified and directed.

Aluminium powder coated designer brackets for curtain rod suitable for aluminium powder coated designer curtain rod in repairs all as specified and directed.

Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe 410-W (Gde-E-250 quality B) complete all as specified and directed.

Plain mild steel bars of 10mm dia for straining line wires including binding wire and handles for MH covers complete all as specified and directed.

PVC coated galvanised iron chain link fencing 50mm x 50mm mesh size and dia of wire 3.15mm all as specified and directed including taking down the existing chain link fencing. Notes: (a) After PVC coating, the dia of wire shall be 4.6mm. (b)For the purpose of payment actual weight shall be measured and paid. (c) The weight of PVC mesh shall not be less than 3Kg/ Sqm.

Mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

Framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

Mild steel work in bands, straps, supports of stays, sunshade brackets, hook and spindle hinges, clamps, hold fasts, guard bars, grills bolts etc and similar conforming to FE-290, Gde E 165 complete all as specified and directed.

Mild steel plain black sheet 1.60mm thick in wall cladding, steel gates and similar works, cut to size, hole punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints including bending or turning up etc. fixed in repairs complete all as specified and directed.

Powder coated aluminium partition of 50mm x 50mm x 1mm thick with 12mm thick exterior grade prelaminated particle board with decorative laminates on both sides fixed with sash bars, aluminium anodised snap beads, screws and aluminium partition doors shall be fixed alongwith partition wall on same section but partly glazed with 5mm thick glass fixed with glazing clips etc. complete in repairs all as specified and as directed. Note: The unit rate quoted shall be inclusive of all builder's hardware such as hinges, bow handles etc. complete

Aluminium powder coated sliding window (for width 1.00 above and openable for below 1.50 M width) using aluminium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with sash bars aluminium anodised snap beads, screws and fixed alongwith same section in three rolling sliding shutters two for fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for wire mesh shutters) etc in repairs. (The rate is inclusive of all fixings of builder’s hard ware such as wire mesh hinges, bow handles, locking arrangements etc.) complete all as specified and directed.

Powder coated aluminium ventilators using aluminium section weighing not less than 0.48 Kg per RM for frame louvers aluminium anodized snap beads, screws and fixed alongwith with 5mm thick frosted/ pin headed glass fixed with glazing clips and one for wire mesh shutter fixed on frame etc. including provision of builders hard ware such as wire mesh, stainless steel hinges, aluminium handles, locking arrangements etc. complete in repairs all as specified and directed.

Powder coated of any colour aluminium (minimum thickness of powder coating 50 micron) door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprane packing handles 2 Nos in ecah door, hinges anodised aluminium snap beading screws etc. complete in repairs all as specified and directed.

18mm thick plywood, grade BWR, type BB fixed with screws/ nails to timber frame work fixed in repairs complete all as specified and directed.

0.9mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

18/ 19mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screw to timber fare work complete all as specified and directed.

All as per item No. 46.00 above but fixed in repairs.

6mm thick teak wood lipping fixed to 18/ 19mm thick plywood/ particle board with nails complete all as specified and directed.

Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering fixed with self tapping screws as per manufacturer’s instruction including taking down existing sheets complete all as specified and directed.

Anodised aluminium snap grid size of grid 605mm X 605mm framework for false ceiling including GI suspenders/ hangers fixed to roof slabs by means of ceiling cleats etc. complete all as specified and directed.

Providing 12mm thick gypsum board as in false ceiling fixed with screws as per manufacturer's instruction complete all as specified and directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 2.5mm dia. 40mm long complete all as specified.

8mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber /GI/Aluminium framework with screws.

Preparing new surfaces of ceilings and applying two coats of oil bound distemper including 2 to 3mm thick wall care putty directed by the Engineer-in-Charge.

2nd class hard wood Plain fillets, square, rectangular or triangular in section, sectional area Exc 6 Sq cm n exec 13 sq cm clean sawn, secured with nails or brads

12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorate face veneers on both faces; fixed with screws to timber frame work

1.5 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside MD land and rubbish of the premises complete all as specified and directed.

25mm thick PCC (1:2:4) type B-0 thick using 12.5mm graded stone aggregate finished fair and even complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in floor finished even and smooth complete all as specified and directed.

Vitrified light shade ceramic tiles 10mm thick (square / Rectangle) polished, area of each tiles exc.0.42 sqm but not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed or bedding layer of mortar 20mm thick CM 1:4 for laying floor finishes.

All as per item No 61.00 here in before but on vertical surfaces such as skirting, dados and risers to step etc in setting 10 mm thick CM 1:3

Vitrified light shade coloured ceramic tiles 8 to 10mm thick (Square/ Rectangle) area of each tiles n. exc. 0.36 sqm in floors etc.; set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

All as per item No. 63.00 above but on vertical surfaces such as skirting, dados and risers as in steps etc., laid over and including 10mm thick rendering in cement mortar (1:3) complete.

Non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

All as per item No. 66.00 above for but on vertical surfaces such as skirting, dados and risers as in steps etc., laid over and including 10mm thick rendering in cement mortar (1:3) complete.

Glazed coloured ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 300mm x 7mm thick laid on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the tile laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigment laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

10mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering on ceiling in cement mortar (1:3) and surface finished even and smooth without using extra cement complete all as specified and directed.

Figured glass 4mm thick pin head type and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane including hacking out old broken glass from metal frames including punching or drilling old glazing pins and providing and fixing new ones complete all as specified and directed.

Sheet glass 4mm thick plain ordinary quality and glazing with oil putty in squares exc. 0.50 Sqm in each pane including hacking out old broken glass from metal frames including punching or drilling old glazing pins and providing and fixing new ones complete all as specified and directed.

Sheet glass 4mm thick plain ordinary quality and glazing with beads fixed with metal panel pins in square exc 0.5 sqm in each pane providing & fixing new ones

Solar control film 50 micron reflective type sticked to glass panes as per manufacturer's instructions complete all as specified and directed.

Applying three coats of white wash including preparation of new plastered surfaces of ceiling complete all as specified and as directed.

Preparation of old decorated plastered surfaces of walls including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated plastered surfaces of ceiling including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and treating oil & greasy spots and applying one coat of Oil Bound Distemper complete all as specified and directed.

Complete removal of existing treatment with electric operated blade, washing with water and bleaching powder solution on external surface of walls and applying two coats of Weather Proof Exterior Acrylic Emulsion paint (Apex of Asian or equivalent of other specified makes) over a coat of sealant and exterior primer complete all as specified and as directed.

Complete removal of existing treatment with electric operated blade, washing with water and bleaching powder solution from wall surface and applying two coats of oil bound distemper over a coat of primer using chalk whitening complete all as specified and directed.

Complete removal of existing treatment with electric operated blade, washing with water and bleaching powder solution from wall surface and applying two coats of oil bound distemper over a coat of primer using chalk whitening over and including a coat of 2 to 3mm thick wall care putty complete all as specified and directed.

Preparation of new surface and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Applying one coat of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

Applying one coat of synthetic enamel paint on steel surfaces of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

Preparation of new wooden or wood based surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface of any description exc. 10cm width or girth including preparation of surface complete all as specified and directed.

Preparation of old wood and wood based surfaces of any description over 10 cm in width or girth and applying one coat of varnishing with fininshing coat of synthetic varnish over a filler coat of thin varnish or lacquer or shellac varnish complete all as specified and directed.

Ball valve PTMT with epoxy coated aluminium rod for 20mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe complete in repairs all as specified and as directed.

PVC over head water tank cover suitable for 250 to 2000 lt capacity tank including hing devise and locking arrangement complete in repairs all as specified and directed by the engr in charge (make Syntex/Rino)

Steel water tubing (medium grade) outer dia 16mm to walls/chases/ceilings or laying in floors Polyethylene-Aluminium Ployethylene (PE-AL-PE) composite pressure pipes including all Crimp type internal sealing Plansticmetal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) complete including taking up (or) down the existing GI pipe completely all as specified.

All as per item No 95.00 here in before but 20mm bore

15mm dia bib taps brass chromium plated as per Cat No. 8308 of Prayag , fancy type, long body with flange with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs complete all as specified and directed.

CP pillar cock extended body as per Cat No. 8304 of Prayag complete in repairs all as specified and directed.

15mm Concealed stop cock regular body with flange plate, chromium plated as per Cat No. 8318 of Prayag complete in repairs all as specified and directed.

15mm dia angle cock with flange, chromium plated as per Cat No. 8310 of Prayag complete in repairs all as specified and directed.

CP Square trap size 101mm x 101mm as per Cat No. FT-73 of Prayag complete in repairs all as specified and directed.

Gun metal globe or gate valve 20mm bore with iron wheel head, screwed both ends for iron pipe complete in repairs all as specified and directed.

All as per item No 102.00 here in before but of 25mm bore

Soap dish, matt finished, chromium plated (MCH/ colour) as per Cat No. BA-25G of Prayag in repairs all as specified and directed.

15mm dia CP bib cock with nozzles with flanges, as per Cat No. 8305 of Prayag complete in repairs all as specified and directed.

CP waste coupling heavy (full thread) of size 32mm as per Cat No. BEA-11 of Prayag complete in repairs all as specified and directed.

CP towel rack 600mm with lower hanger stainless steel as per Cat No. BA-12 of Prayag complete in repairs all as specified and directed.

PVC waste pipe for wash hand basin (size 31/ 32mm x 800mm length) in repairs all as specified and directed. Make: Prayag Cat No. 327

PVC waste pipe for wash hand basin/ sink (size 38/ 40mm x 1150mm length) in repairs all as specified and directed. Make: Prayag Cat No. 330

CP towel rail 600mm as per Cat No. BA-20 of Prayag complete in repairs all as specified and directed.

Vitreous china wash hand basin, white, flat back of size 550mm x 400mm including 32mm waste coupling and waste pipe etc., fixed in repairs complete all as specified and directed.

PTMT grating doom with waste hole 125mm dia as per Cat No. 113 of Prayag complete in repairs all as specified and directed.

Vitreous china wash down water closet pedestal pattern white with including white coloured PVC seat cover including connections to drain (or outgoing pipe) and flush pipe etc. fixed in repairs complete all as specified and directed.

Vitreous china closet squatting pan Orissa pattern of size 580mm x 440mm with integral foot rest (white or light coloured) including making necessary connection to soil pipes and flushing cistern fixed in repairs complete all as specified and directed.

Vitreous china white bowl urinal flat back of size 465mm x 355mm x 265mm (min.) with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete in repairs all as specified and directed.

Plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device of make fixed with CI brackets in repairs.

Health faucet (hand shower) with 1.0metre long PVC tube with wall hook, chromium plated as per Cat No. BEA-87 of Prayag complete in repairs all as specified and directed.

15mm dia chromium plated two way angle cock with as per Cat No. 8311 of Prayag complete in repairs all as specified and directed.

CP overhead shower ABS round with 225 brass arm and flange as per Cat No. BS-69 of Prayag complete in repairs all as specified and directed.

15mm dia chromium plated sink cock regular spout (W/M) with flange plate as per Cat No. 8316 complete in repairs all as specified and directed.

15mm dia chromium plated bib cock short body with flange plate as per Cat No. 8306 of Prayag complete in repairs all as specified and directed.

15mm PVC connection 450mm long with PTMT nuts of superior quality in repairs all as specified and directed.

PVC low level flushing cistern 10 ltr with complete accessories such as PVC flush pipe, over flow pipe etc. fixed in repairs complete all as specified and directed.

Toilet paper holder with flap recessed type matt chromium plated as per cat No. BA-38 of Prayag complete all as specified and directed.

S&F in repairs Corner glass shelf matt fnished chromium plated (MCH/ Colour CP) with bracket as per Cat No. BEA-52 of Prayag complete in repairs all as specified and directed.

Glass shelf matt finished, chromium plated (MCH/ Colour CP) of size 500mm x 60mm with ABS bracket 450mm x 125mm x 6mm and fittings as per Cat No. BEA-53 of Prayag complete in repairs all as specified and directed.

Brass chromium plated wall mixer valve 2-in-1, fancy type L bend with provision of overhead as per cat No. 8375 of Prayag complete in repairsall as specified and directed.

Stainless steel sink of overall size 915mm x 460mm with draining board and bowl size 410mm x 330mm x 160mm made out of stainless steel sheet of 1mm thick makes specified in Particular Specifications with plugs, washers, waste coupling and 40mm dia waste pipe, fixed over CI brackets and connecting union to pipe etc., compete in repairs all as specified and directed.

Stainless steel plate rack of size 31" x 36" x 10" with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of good quality in repairsall as specified and as directed. Make: Prayag Cat No. P-348 .

600mm x 450mm bevelled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete in repairs all as specified and directed.

Brass chromium plated towel ring all as specified and directed. Make: Prayag Cat No. BA-11 .

Brass chromium plated shower rose of size 75mm with swivel joints including shower arm 195mm long with bend of 45° with flange fixing with 15mm dia pipe complete in repairs all as specified and directed.

Tumbler holder with glass as per Prayag Cat No. BA-26G in repairs.

Cabinet mirror PTMT 400 X 500 mm with sided shelves fancy of superior quality Prayag Cat No. 554 in repairs.

Centre hole basin mixer w/o popup Prayag Cat No. 8350 in repairs.

110mm bore single socketed PVC (SWR) pipes in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

150mm bore single socketed PVC (SWR) pipes in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

110mm bore single socketed PVC (SWR) pipes in any length with rubber ring joints fixed to walls complete all as specified and directed.

PVC (SWR) bend any radius suitable for 110mm dia pipes complete all as specified and directed.

Taking down rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc

PVC (SWR) branch piece single (single 'Y') equal or unequal 110mm bore with access door complete all as specified and directed.

Supply, hoisting and fixing in position of 500 litre capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) including dismantling the existing overhead tank complete all as specified and directed.

Supply, hoisting and fixing in position of 1000 litre capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) including dismantling the existing overhead tank complete all as specified and directed.

Disconnecting existing tanks exc. 250 and n. exc. 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. & hoisting, if required, reconnecting & re-fixing in position after removing all scale & dirt etc. from tanks & form mouths of circulating pipes complete all as specified and directed.

Disconnecting existing tanks exc. 500 and n. exc. 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. & hoisting, if required, reconnecting & re-fixing in position after removing all scale & dirt etc. from tanks & form mouths of circulating pipes complete all as specified and directed.

Cleaning of septic tank and sumps of any depth by bailing out fluid including removing of sediments, sludge etc. using honey sucker machine complete all as specified and directed.

Roding and cleaning of 100mm bore sewage line of any depth between gully trap & manhole/ two adjoining manholes with jet roding machine by mechanical means with jet pressure pump and removing all foreign material and sludge from pipe line and making the line functional complete all as specified and directed.

All as per item No. 147.00 above but 150mm bore.

Cleaning of manholes of any size and any depth by mechanical means including lifting, removing sludge, water and cleaning with water including cutting grass, vegetation and bushes to a width of 60cm alround the manhole and refixing of existing manhole cover slab with out damange complete all as specified and directed.

Desilting of covered drains/ culverts of any size and depth including removal of mud/ soil/ grass and removal/ refixing of cover slabs etc. and disposal of spoil outside the MD land complete all as specified and directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stone work including removal of rubbish outside MD land complete all as specified and as directed.

Demolition of un-reinforced cement concrete of any description and in any other position not otherwise specifically provided for and removing the debries outside MD land complete all as specified and directed.

Demolition & breaking up 100mm bore internal dia, drain pipes (Salt glazed stoneware, AC or reinforced concrete) set in cement mortar all as specified and as directed.

Demolition & breaking up 150mm bore internal dia, drain pipes (Salt glazed stoneware, AC or reinforced concrete) set in cement mortar all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. and removal of debris to outside of MD Land complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

Dismantling wall/ ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets; any thickness, including cover fillets/ snap grid etc. complete all as specified and directed.

Sri Aruna Associates