REPAIRS TO DOOR WINDOW VENTILATION KITCHEN CABINET JOINERY AND OTHER MISC AT ZONE II AREA UNDER GE MCEME SECUNDERABAD

Amount

Taking down chowkhats or frames not exc 1.5 sqm each(without taking off shutters from the frames), etc complete all as specificed and as per directed by Engineer-in-Charge.

Taking down, Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame), etc complete all as specificed and as per directed by Engineer-in-Charge.

Taking down, Shutters of any description exc 1sqm but n.exc 2 sqm each, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F pressed steel door frame 125 x 60mm with one or more rebats including fixing lugs, hinges, lock strike plate etc complete all as specified and directed

S&F pressed steel door frame 105 x 60mm with one or more rebats including fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping, filling in door frame etc. complete all as specifed and directed.

S & F 2nd class hardwood,Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints,etc complete all as spd and directed.

M&L for Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer-in-Charge.

S&F steel windows/ventilator with slide/top hung shutters inculding box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description,over 10cm in width or girth with two coats of synthetic enamal paint over a coat of red oxide, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercials type on both sides complete all a specified and directed.

S&F 2nd class hardwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads of securing glass, gauze etc and fitted to chowkats, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F 2nd class hard wood 35mm thick, plain, framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperature 1.40mm & fixed with stainless steel wire staples , etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F for Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, size of hinges in 100mm, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F aluminium handles 150mm long fabricated type anodised, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated surface of wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enemal paint over a coat of pink primer, etc complete all as specificed and as per directed by Engineer-in-Charge.

Dismantling boarding, any description fixed in any position with nails, complete all as specified and directed by Engineer-in-Charge.

M & L for 18/19 mm thick, Prelaminated particle board,exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work, complete all as specified and directed by Engineer-in-Charge.

M & L for 12 mm thick, Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work, complete all as specified and directed by Engineer-in-Charge.

M & L 2nd class hardwood exc 3 & n exc 6 sqcm plain fillets.'square,rectangular or triangular insection, clean sawn, secured with nails orbrads , complete all as specified and directed by Engineer-in-Charge.

S&F continuous (Piano ) Hinges 30 mm width of flaps, mild steel bright finish or elecrogalvanised complete all as specified

S&F 100mm aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed.

S&F 100 mm size Hasp and staple, Aluminium anodised, wire type, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished all as specified and as directed.

S& F Mortice lock, vertical type, size 65 mm 4 lever complete all as specified and directed by Engineer-in charge.

S & F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed,etc complete all as spd and directed.

S&F in repairs aluminium extruded section body door closer Hydraulically regulated designed No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frames metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones, etc complete all as specified and as per directed by Engineer-in-Charge. (Note : Work to be carried out from ground floor to fourth floor of bldg height)

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane , etc complete all as specified and as per directed by Engineer-in-Charge. (Note : Work to be carried out from ground floor to fourth floor of bldg height)

M&L for rendering 10mm thick cement plaster in CM 1:6, on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for rendering 15mm thick rendering in two layers (5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6) on external surfaces of brick work or concrete surfaces even and smooth without using extra cement, including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as per directed by Engineer-in-Charge.

Demolition of brick work of any description andy in any position not othterwise specifically provided for, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for brick work with fly ash, modular bricks straight or curved on plan exc 6m mean radius built in CM 1:6, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for rendering 10mm thick cement plaster in CM 1:6, on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement including taking down cement plaster of any description, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for rendering 15mm thick cement plaster in two layers (5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6) on external surfaces of brick work or concrete surfaces even and smooth without using extra cement, complete all as specified and as per directed by Engineer-in-Charge.

Supply only Integral water proofing compound, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant paint , etc complete all as specificed and as per directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for PCC 1:2:4 25mm thick, type B0 (12.5mm graded agg) as as floor finishes, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured tiles 450x300x7mm thick, vertical surfaces such as dados, incl 10mm thick rendering in CM 1:3 to receive tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer -in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc and jointed in neat cement slurry 10mm thick screed bed or bedding layer of cement mortar 1:4 laying floor finishes and pointed in white or coloured cement to match , etc complete all as specificed and as per directed by Engineer-in-Charge.

M&L for Vitrified Ceramic coloured tiles, light shade, 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over 10mm thick screed bed of CM 1:4 and pointed in white or coloured cement to match etc. complete all as directed.

S&F vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in repairs fancy type chromium plated 15 mm bore 2 in 1 bib cock , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.a specified and directed.

Taking up or down steel tubing & connections, 15 mm dia, etc complete all as specificed and as per directed by Engineer-in-Charge.

Taking up or down steel tubing & connections, 20 mm dia, etc complete all as specificed and as per directed by Engineer-in-Charge.

Taking up or down steel tubing & connections, 25 mm dia, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 15 mm, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 20mm, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls or laid in floors bore of pipe 25mm, etc complete all as specificed and as per directed by Engineer-in-Charge.

Cutting chases ,pinning in making good to facing where required of brick walls and pointed in cement mortar 1:3 for concealed water tubing etc cutting not exc 10 cm girth, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in repairs chromium plated fancy type stop cock copper alloy 15mm bore screwed down high presure with crutch or butterfly handle screwed both ends for iron pipes, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in rep CP bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe of dia 15mm, fancy type, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in repair Brass chromium plated shower rose 125 mm size with or without swivel joints , any size including fixing to steel pipe or union, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F in repair, PVC valveless, 10 litrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, etc complete all as specified and as per directed by Engineer-in-Charge.

S & F in rep Grating doom 100mm dia of PTMT (Minimum weight 25gms), etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average widthof aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and as per directed by Engineer-in-Charge.

M&L 2nd class hardwood exc 6 & n.exc 13 sqcm plain fillets square, rectangular or triangular insection, clean sawn, secured with nails orbrads , etc complete all as specified and as per directed by Engineer-in-Charge.

M&L for cement concrete type B-0, 1:2:4 (12.5 graded stone agg) as in fixing of groove cutting/hold fast/coping, etc complete all as specified and as per directed by Engineer-in-Charge.

S&F CP curtain rail / drapery rod 20 mm dia of approved pattern along with decorative SS brackets of approved quality and pattern fixed with screws, etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in rep SS soap dish, any type, fixed to plugs with chromium plated brass screws, etc complete all as specified and as per directed by Engineer-in-Charge.

S&F in repair prepainted steel windows/ventilators ( ECO–4000 Series Windows (Double Rebate Windows) or equivalent) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS-513 “D” quality galvanized as per IS-277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm. Sections for Frame should be of 72x55mm, Section for Mullion should be of 72x50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12x12mm, and Section for Fly Mesh should be of 40x20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges–1 set, Seccolor Handle & Seccolor Stay and 4mm Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6x12mm MS flat and fixed to window frame with screws , complete all as specified and directed by Engineer-in-Charge. (Make : NCL/TATA/Equivalent)

S&F 50 mm long Magnet ball catcher made out of PVC fixed to shutter and chowkhats with SS screw all as specified and directed by Engr-in-Charge.

S&F in Anodised aluminium Powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beadingscrews etc. complete all as specified complete all as specified and directed

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, complete all as directed by Engr-in-Charge

S&F Anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

Sheet glass, 4.80 mm ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane omplete all as directed

harshraj and co (BID ID -3481176)

M/s KGN Builders (BID ID -3473158)

NEWS CONSTRUCTIONS (BID ID -3482154)