REPAIR TO FLOORING PLASTERING ROOF CEILNG AND CERTAIN B R WORKS IN TRAINING AND MARRIED ACCN AREA AT INS CHILKA UNDER GE CHILKA

Amount

Dismantling of floor, health or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles as in vertical surface such as dado/skiriting etc of size 350mm x 250mm /300mmx200mm x 6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for vitrified ceramic tiles 9 to10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match (light shade) over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for chequered colour cement concrete tiles with grey cement and pigment of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors / steps in and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for machine pressed precast concrete coloured interlocking paver block with grey cement and pigment of any shape, colour and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade over and including sand filling of minimum 50mm thick complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 CM thickness (below or above ground level) complete all as specified and as directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring, surface finished even and smooth using extra cement complete all as specified and as directed.

Supply only glass dividing strips, 3mm thick and 28mm width and inserted in position to conform to design complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even fair complete all as specified and as directed.

M&L forming 12mm thick expansion joints filled with pre-formed bituminous filler & top 30mm primed and sealed with sealing compound, Grade `A' in 75 mm thick concrete complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for 15 mm thick rendering (in two layers) on brick work or concrete sufaces, Ist layer 10 mm thick in cement mortar 1:4 and 2nd layer in cement mortar 1:4 mixed with WPC @ 3% by weight of cement , surface finished even and fair complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

M&L 10 mm thick rendering on brickwork or concrete surfaces in cement mortar 1:6,surface finished even and fair complete all as specified and as directed.

M&L 5 mm thick rendering in cement mortar 1:3 as in ceiling, surface finihsed even and fair complete all as specified and as directed.

M&L applying two coats of oil bound distemper over one coat of alkali resistant primer and including 1mm thick wall care putty on ceiling complete all as specified and directed

M&L for applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of silver steak shade of asian paint over a coat of primer on prepared external surfaces of walls of any description over 10 cm width or girth etc on column/ pillars, RCC chajja and facia complete all as specified and as directed.

M&L for applying three coat of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying three coat of white wash on wall including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Demolition of brick work or stone masonary built in cement mortar or cement lime mortar including all quoins,arches, pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L Rounding to edges of stone slab one edge, such as in steps cooking platform and other similar work complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exceeding 50m complete all as specified and as directed.

M&L pre-cast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate in landings, chajjas, anchorage blocks, cover slabs for manholes , shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary use and waste of form work complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and as directed.

M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L mild steel work as in framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, ladders framed balusters, and similar work conforming to Fe-290 Gde-165 complete all as specified and as directed.

M&L mild steel work as in roof trusses (framed), trussed, purlins and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410- W Gde-E-250 quality- A complete all as specified and as directed

S&F tubuler steel trusses including special shaped, heavy vertical post etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS- 1161-1979 grade St-240 complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preperation of new steel urfaces of any description , not otherwise described over 10cm width or girth complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge and thickness from roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed.

S&F for pre-painted galvalume aluminium zink coating GI based corrugated steel sheets 0.50 mm thick of an colour having tensile strength of 550 MPs as in roof covering/cladding to walls , fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI Based plain steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering or cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L- type or J- type or cranked hook bolts as in roofs, walls etc complete all as specified and as directed.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting mm in ridge, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed

S&F in repair 4 mm thick PVC coated galvanised iron wire rope for hanging cloths including fixing arrangement with steel member (as per sample) complete all as specified and as directed

S&F in repair plate rack of size 24inchx30 inchx10 inch complete all as specified and as directed. Make : Prayag cat No P-330 or equivalent as approved.

S&F stainless steel sink with drainage board made out of 1.0 mm thick stainless steel sheet for kitchen with plug , washers waste pipe , cast iron cantilever brackets overall size 915mmX460mm with bowl size 410mmX330mmX160 mm complete all as specified and as directed.

S&F in repair PVC low level flushing cistern of 10 litre capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600 mm long complete all as specified and as directed.

S&F vitreous china wash hand basin , white flat back of size 580mm X 450mm with fixing brackets including 15 mm bore chromium plated pillar tap fancy type and other fixing accessories including necessary connection and fixed complete all as specified and as directed.

S&F in repair plastic water closet seat , white closed pattern with flat bottom and cover including chromium plated or aluminimum hinging device complete all as specified and directed.

S&F in repair 50 mm bore Low density polyetylene pipe(LDPE) of pressure rating 6kgf/cm2 as in waste pipe to wash hand Basin/Kitchen sink /urinal complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan, semi pedestal pattern (Anglo Indian) including fixing bolt, excluding flushing cistern and flush pipe complete all as specified and as directed.

S&F in repair 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests excluding flushing cistern and flush pipe complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bend with access door complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450mm center to center/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm center to center with GI cleat and steel expansion fasteners with including ceiling section(n.exc 1.2m length)of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel at 457mm center to center complete all as specified and as directed.

M&L for 12mm thick gypsum board in ceiling fixed with screws as per manufacutrer's instructions complete all as specified and directed

M&L applying two coats of oil bound distemper over and including 1mm thick wall care putty on ceiling complete all as specified and directed

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for vitrified ceramic tiles 9 to10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match (light shade) in and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8ype D-2 using 40mm graded stone aggregate as in sub base of flooring complete all as specified and as directed.

M&L for 18-20mm thick pre-polished machine cut kota stone slab flooring over 15mm thick screed bed in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 18-20mm thick pre-polished machine cut kota stone slab as in riser, steps,skirting ,dadpo etc over and including 10mm thick rendering in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

SUBAL CHARAN PRADHAN

VAIKUNTHA PARIDA

HARI HARA NAYAK

ANTARYAMI PANDA AND COMPANY

ABHIMANYU MAHARANA

PRASANTA KUMAR PANDA