Repair of Pawal tappal aligarh road NH 334D and pavd shoulder work by street light and Intorloacking titles in khair and Jattari Abadi area (Street Light work)

Supply & Fixing of 8 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 135 mm and base Plate 16mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on 1.2.4 RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.(bracket as per design atteched)

Road cutting and repair for laying of cable work through 100mm dia Gl pipe as per SOR road cutting rate dated 23.06.2022

Supply and fixing of LED Street light fitting with mandatory driver set efficiency >85% having dia cast al body with toughend glass /UV stblized PC Cover & lenses as per IESNA suitable for 90W and confirming to IP 66 IK 10 Protection heaving company logo engraved complete heaving > 12150 system lumain 135 lumain per watt, PF>0.95 THD>10% at full load CRI >70 phase to phase to protection at 440V & >300V, SDCM<5, LM79 and LM 80 Test report, Auto cut & restart feature 4KV, internal surge protection with 5year warranty.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surfact the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 70 sq. mm 3-1/2 core

50 sq. mm 3-1/2 core

25 sq. mm 3X1/2 core

10 sq. mm 4 core

S/E of double walled corrugated HDPE pipe size 90/76 mm at a depth of 75 to 1.20 mtr. Below ground level complete excavation and back filling (rate includes manual trench less if required) complete work as per direction of E/I.

S/B of Gl pipe earthing 4.50m long with 40mm dia. Pipe & accessories complete.

S/F of 6 SWG GI wire complete in all respect

S&F of GI Pipe midium class in ground complete in all respect 100mm dia

S/F of 6 Amp to 32 Amp. SPMCB (10 KVA) C Curve complete in all respect as per the direction of the eigneer in charge.

Numbering of pole, panel and Sub panel as per required

Providing & fixing M.V. Danger notice plate 200X150mm made of M.S. 2.0 mm thickness with white (back) and red colour fornt as required

S/F of brass nickle plated compression gland for aluminium armerd cable complete in all respect 70 Sqmm

S/F of copper tin plated Lug for armerd cable complete in all respect 10 Sqmm

Supply and fixing of 1.5sqmm 3 Core pvc insulated round sheathed cable. complete in all respect.

S/F of 25X5mm GI Strip on Surface/recess as required

Supply & Fixing of Triglow LED rope lights (18mtr) 108 W. PF >0.9, IP 65 protection against Dust & Water complete in all respect. Make phillips /eqvt.

S/Fixing of 100 mm width high quality Radium sticker pasting on pole,

S/F of MCB Mounting Rail & Suitable Size Connector 16A for 8/4 connetions complete in all respect.

supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mouting. MS channel base with bottom and topmcable entries electrical control panel with TPN MCCB (4Pole 36KA with Thermal magnetic release) complete The panel board shall have suitable capacity electrolytic aluminium busbar snsulated with heat shrik sleeving and mounted on non hygroscopic support such as CMC/DMC support with detaichable side covers and shall be suitable for extension on sides. The MCCB shall be complete with suitable cable end boxes compression gland and indicating lamp on incoming & ougoing complete The job includes the groutnig of sub panel board as per direction of engineer incharge . All outgoing 32/16A . The switch board shall be fabricated with CRCA sheet with minium thickness of 1.6/2.0 mm. Cubic type swith board shall be of category A only. panel should have manual on /off switch and concern accessories complete in all respect.. INCOMING:-1. MCCB 32A 4POLE 36KA -01No 2. PHASE INDICATOR (R,Y,B) -01 Set 3. ON/OFF INDICATOR -01SET OUTGOING: -1. MCB 16A 3 Pole 36KA -04 Nos. 2. MCB 16A 3 pole -01 Nos. (Spare) BUS BARS:-1. 32A FP ALUMINIUM BUSBAR -01 Set

Please Enable Macros to View BoQ information