PROVN OF SPECIAL REPAIR AND LBW WORKS OF E/M NATURE AT DAMANA UNDER GE JAMMU

Amount

Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 300 Sqmm 3½ core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 Sqmm 3½ core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sqmm 3½ core complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5m depth and getting out in hard and dense soil, for foundation of pole, stay, laying of cable and pipe etc complete all as specified and directed by Engineer-in-Charge.

Returning and filling in, including spreading and well ramming in layers not exceeding 25 cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and labour for dry sand cushioning to underground cable in trenches including spreading, levelling and hand punning complete all as specified and directed by Engineer-in-Charge. Note: - The punned thickness of sand cushioning shall be measured for payment purpose.

Supply and laying common burnt clay building sub class 'B' bricks, laid over sand cushioning laid at right angle along with cable complete all as specified and directed by Engineer-in-Charge.

Material and labour Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate of not less than 1.5 metre below normal ground level, connecting to the iron strip 25 X 4mm using 40 mm pipe for protection by means of bolts, nuts, check nuts and washer of GI and earth wire protection by provision of GI light grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) with CI cover with suitable angle frame and handle, GI light grade 20mm bore pipe for watering, perforated at bottom, 1.75 metre long placed on top edge of earth plate, charcoal and common salt filling, funnel, wire mesh and earth work in hard / dense soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electric plate No 5 of SSR Part -I and connecting to earth test point all as specified including testing on completion complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Aluminium thimble for cable of size 95 to 300 Sqmm of ISI mark complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, temperature gauge, water level, connection piece, including fixing of geyser on walls with proper alignment to water taps etc complete all as specified and directed by Engineer-in-Charge.

Labour for fixing of set of 4 No's rawl plug of suitable size (150mm long and 10mm dia) nuts and bolts, grouting work in RCC / Brick wall, cemented works labour charges for cutting to exisiting GI pipe line of size 15/20 mm dia in position for insertion of new tee or branch connection jointing complete with necessary GI fittngs, plumbing work all as per site requirement complete all as specified and directed by Engineer-in-Charge.

Material and labour for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 2.5 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through new rigid PVC concealed conduit fixed on wall with GI clamps. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed by Engineer-in-Charge. Note: - Wiring shall be done in proper colour coding.

Supply and fixing Industrial plug with socket top suitable for geyser, single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 32 Amps complete all as specified and directed by Engineer-in-Charge.

Supply and fixing galvanised iron with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor or trenches complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminshing pieces, caps and plugs, union etc.) of nominal bore 15mm complete all as specified and directed.

Supply and fixing stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm dia of pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC connection of size 15 mm dia with PTMT nuts of length 450 mm long (hot series branded, threaded and cold series) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Bib tap cast copper alloy (CP) with crutch or butterfly handle screwed down, screwed for iron pipe for brass ferrule of size 15 mm bore complete all as specified and directed by Engineer-in-Charge.

Labour for cutting to existing GI pipe of size 25/20 mm dia in position for addition / alteration or insertion of TEE for branch connection complete with cutting, threading and jointing / fixing including GI fitting as per site requirement complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans, BLDC motor tech complete with blades, down rods, electronic regulator, hanging hooks and accessories, 230 V, 1200 mm sweep minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) including checking of electric supply upto the fan point and hanging of new fans on new hooks, including taking down of old unserviceable fan complete and deposit to store all as specified and directed by Engineer-in-Charge.

Supply and connection of PVC insulated, unsheathed multistranded, three core twisted copper flexible cable of size 1.5 Sqmm as required for connection of ceiling fan with ceiling rose / fan point complete all as specified and directed by Engineer-in-Charge.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

Sarbat Construction Co

M/S A K ENGINEERS & CO.

DARVESH ENGINEERING WORKS

Bidder Name

Sarbat Construction Co

DARVESH ENGINEERING WORKS

vishesh engineers

M/S A K ENGINEERS & CO.