Loading…
Loading…
Tender Value
₹3.9 Cr
EMD Value
₹7.7 L
Closing Date
21 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECTRICAL
18 conditions · 6 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of 'V/N' or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Annexure VI-B must be submitted for Financial Eligibility, as enclosed herewith.
Technical Eligibility Criteria:(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
(b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or(ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2) In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b)(3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.
However, if required in tender documents by way of Special Conditions, a formal agreement duly notarized, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows:The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Note for Item 10.1:Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar work for Technical Eligibility:- "Satisfactory execution of any electrical work related to HT/LT installation".
50 conditions · 21 needing a document upload
Please submit your Bank details such as Name of the - Bank along with Bank Branch code, account No., IFSC Code and PAN Number as per the format given in attached tender document.
I/We have carefully gone through the Clause no 10 to 18 of GCC- APRIL,2022 and understood that non-compliance of requirement of these clause and non submission of required documents in compliance, my/our offer will be rejected.
Submission of necessary certificate/declaration regarding notblacklisted/debarred as applicable for respective type of bidding firm, asmentioned under respective clauses from 10 to 18 of GCC-APRIL,2022.
Please furnish list of plant and Machinery available on hand and proposed to be inducted. Own and hired to be given separately for the subject work.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Please furnish list of Works on hand indicating description of Work, contract value, approximate value of balance work yet to be done and contract No. and date of award, awarding unit name & address etc.
Please furnish list of Works completed in last seven financial years giving description of work, orqanization for whom executed, approximate value of contract at time of award, date of award and date of completion. Date of actual. start, actual completion and final value of contract shall also, be given.
Generally deviations of contractor against the Railways speciflcation & special conditions stipulated in the entire tender booklet are not acceptable. Therefore, tenderers are advised not to quote any deviation against the Railways conditions & specification stipulated in tender' document. However, deviation if any should be evaluated in financial term and rate quoted accordingly i.e. deviations should be considered into rates.
Tender should submit documents related to Registration details, GSTIN No., registered address, email ID etc.
No octroi duty is payable. However if desired, a certificate stating that the hired Vehicle is requited for Railways own use shall be issued.
The tender document form is issued free of cost to all tenderers and Bid Security as indicated in the NIT header shall be paid through online' gateway/E-Payment facility provided on IREPS website only, Other mode of payment towards Bid Security will not be accepted. In case payment of Bid Security is not successful during E-payment, the offer will be summarily rejected.
Note: (i) Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security detailed above.
NOTE (ii) Labour Cooperative Societies shall submit only 50% of above Bid Security detailed above
JVs/Consortiums/MOU s will not be considered.
GCC Clause 14: Documents to be Submitted Along with Tender : (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii)Following documents shall be submitted by the tenderer: (a) Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. (b) HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.(c) Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). (d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet).(e) Company registered under Companies Act-2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.
(f)LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract.(v) All other documents in terms of explanatory notes in clause 10 above. (g) Registered Society & Registered Trust: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed(iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society(iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.(iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv) After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v)A tender from JV / Partnership firm etc. shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
GCC Clause No.15:- The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board 13.1.1 resolution, failing which tender shall be summarily rejected.A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required.Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The Bid Security shall be deposited either in cash through epayment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period. E-Tender Forms shall be issued free of cost to all tenderers.
The Bid Security deposited by the Contractor with his tender if applicable will be retained by the Railways as part of security deposit for the due and faithful fulfillment of the contract by the Contractor. The Security Deposit shall be 5% of the contract value. The Bid Security submitted by the Contractor with his tender will be retained/encashed by the Railways as part of security for the due and faithful fulfillment of the contract by the Contractor. Provided further that, if Contractor submits the Cash or Term Deposit Receipt issued from a Scheduled commercial bank of India or irrevocable Bank Guarantee Bond from a Scheduled commercial bank of India, either towards the Full Security Depositor the Part Security Deposit equal to or more than Bid Security, the Railway shall return the Bid Security, to the Contractor.Balance of Security Deposit may be deposited by the Contractor in cash or Term Deposit Receipt issued from Scheduled commercial bank of India or irrevocable Bank Guarantee bond issued from Scheduled commercial bank of India, or may be recovered at the rate of 6% of the bill amount till the full Security Deposit is recovered. Provided also that in case of defaulting Contractor, the Railway may retain any amount due for payment to the Contractor on the pending "on account bills" so that the amounts so retained (including amount guaranteed through Performance Guarantee) may not exceed 10% of the total value of the contract.The Irrevocable Bank Guarantee submitted towards Security deposit shall be initially valid up to the stipulated date of Maintenance period plus 60 days and shall be extended from time to time, depending upon extension of contract granted in terms of Clause 17A and 17B of the Standard General Conditions of Contract.Note: Security Deposit deposited in cash by the Contractor or recovered from the running bills of a Contractor or submitted by contractor as Term Deposit Receipt(s) can be refunded/returned to the contractor, in lieu of irrevocable Bank Guarantee bond issued from scheduled commercial bank of India, to be submitted by him, for an amount equal to or more than the already available Security Deposit, provided however that, in a contract of value less than Rs. 50 Crore, such refund/ return of the already available Security Deposit is permitted up to two times and in a contract of value equal to or more than Rs. 50 Crore, such refund / return of the already available Security Deposit is permitted up to three times.
Rates are inclusive of all taxes, duties, labour, freight; material, insurance etc.No.extrapayment will be made on this account. Railway may deduct any taxes being levied by the Government from No time to time or in force from time to time. Tenderer may consider this aspect while quoting for the work.
Performance Guarantee: The procedure for obtaining Performance Guarantee is outlined below:-(a)The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22ndday after the date of issue of LOA. Further, if the 60thday happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day.In all other cases, if the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated. In case contract is terminated railway shall be entitled to forfeit Bid Security and other dues payable to the contractor against that particular contract, subject to maximum of PG amount. In case a tenderer has not submitted Bid Security on the strength of their registration as a Startup recognized by Department of Industrial Policy and Promotion (DIPP) under Ministry of Commerce and Industry, DIPP shall be informed to this effect. The failed Contractor shall be debarred from participating in re-tender for that work.
The successful bidder shall submit the Performance Guarantee (PG) in any of the following forms, If a tender is accepted on the quoted rates of bidder which is below the advertise tender value , An additional performance security shall be submitted by the bidder as below :- Additional performance guarantee is Nil for Bid quoted in % of advertised cost -Below 0- 5 % ( Inclusive ) And Additional performance guarantee is 5% for Bid quoted in % of advertised cost -Below 5 % ( Inclusive ). (i)A Deposit of cash; (ii)Irrevocable Bank Guarantee; (iii)Insurance surety bond as per Annexure- XVII. Note : In case of extension of date of completion selected bidder need to submit extended insurance surety Bond /fresh insurance surety Bond/performance security in any form as given above, before expiry of existing insurance surety Bond (iv) Government Securities including State Loan Bonds at 5% below the market value. (v) Pay Orders and Demand Drafts tendered by any Scheduled Commercial Bank of India. (vi ) Guarantee Bonds executed or Deposits Receipts tendered by any Scheduled Commercial Bank of India. (vii) Deposit in the Post Office Saving Bank. (viii) Deposit in the National Savings Certificates. (ix) Twelve years National Defence Certificates. (x) Ten years Defence Deposits. (xi) National Defence Bonds and (xii) Unit Trust Certificates at 5% below market value or at the face value whichever is less. Also, FDR in favour of FA&CAO (free from any encumbrance) may be accepted.
(c)The Performance Guarantee shall be submitted by the successful bidder after the Letter of Acceptance (LOA) has been issued, but before signing of the contract agreement. This P.G. shall be initially valid upto the stipulated date of completion plus 60 days beyond that. In case, the time for completion of work gets extended, the Contractor shall get the validity of P.G. extended to cover such extended time for completion of work plus 60 days.
(d)The value of PG to be submitted by the Contractor is based on original contract value and shall not change due to subsequent variation(s) in the original contract value.
(e)The Performance Guarantee (PG) shall be released after physical completion of the work based on 'Completion Certificate' issued by the competent authority stating that the Contractor has completed the work in all respects satisfactorily.
(f)Whenever the contract is rescinded, the Performance Guarantee already submitted for the contract shall be encashed.
(g)The Engineer shall not make a claim under the Performance Guarantee except for amounts to which the President of India is entitled under the contract (not withstanding and/or without prejudice to any other provisions in the contract agreement) in the event of:-(i)Failure by the Contractor to extend the validity of the Performance Guarantee as described herein above, in which event the Engineer may claim the full amount of the Performance Guarantee.(ii)Failure by the Contractor to pay President of India any amount due, either as agreed by the Contractor or determined under any of the Clauses/Conditions of the Agreement, within 30 days of the service of notice to this effect by Engineer.(iii)The Contract being determined or rescinded under clause 62 of these conditions.
Tenderer shall upload the documents in PDF format only.
The Railway administration reserve the right to reject any tender either in whole or in part without assigning any reason whatsoever. The final acceptance of the tender shall rest with the competent authority of Railway whd reserve. the right to accept or reject any tender without assigning any reason thereof and does not bind himself to accept the lowest tender only.
Estimated rates are all inclusive and rate to be quoted should be all inclusive. Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and the locality of the work, that all conditions liable to be encountered during the execution of the works are taken in to account that the rates he enters in the tender form are adequate and all inclusive accord with the provision in Clause- 37 of the standard general conditions of contract for the completion of the works to the entire satisfication of the Engineer.
Electrical/G work for : Part-A: Virangana lakshmibai Jhansi Extension of IOH Shed cum Sick Line in Coach Care Centre, Jhansi. Part-B: Extension of IOH Shed cum Sick Line in Gwalior Coach Care Centre.
JHS-ELG-W-T-16-2026-27~NCR
JHS-ELG-W-T-16-2026-27
Open
Works - General
6 Months
Jhansi, Uttar Pradesh
₹0
₹7.7 L
29 Aug 2026
29 Aug 2026
7 Sept 2026
58 items across 2 schedules · ₹3,86,24,711 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply, installation, testing and commissioning of 1000KVA package type substation comprising with 11 KVHT three-way RMU (2IKA.3Sec) with 2 nos. load break switch & 1 no SF6 VCBwith CTR-5D/1A.CL-5P10.2.5 VA within built IDMT protection. 1000 KVA11/433 KV dry type transformer with off load tap link +5% to -10% in stepsof 2.5% complete with all accessories.1600A FP electrically draw out type ACB 50 KA O/L, S/C. microprocessor based. 800 A FP electrically draw out type ACB 50KA O/L.S/C.microprocessor based, 3x400A TP manually fixed type MCCB 36 KA O/L,S/C thermal magnetic based 3x250ATP manually fixed type MCCB 36 KAO/L, S/C thermal magnetic based.inter connection between HT section.Transformer & LT section through AIbus bar & copper cable. CSS enclose made out of GI sheet complete with standard fitting and suitable foroutdoor installation with our innovative complete with exhaust fan. thermostat.internal illumination door limit switches etc S O/L.S/C.E/F protection, complete with indication lamps with protection MCB with accessories complete as per IS/IE Rules and site requirement. | Numbers | 2.00 | 39,84,560 | 79,69,120 |
| 2 | Supply, Installation,testing, painting &commissioning of LTpanel board consistingwith 2nos. ACB-1000A,4 Pole, 60 KA asincoming and 2nos. DN3-400M, MCCB,400A, 4 Pole, 50 KAmicroprocessor releaserange 160-400 A, 08nos DN2-250N, MCCB-200A, 4 Pole, 10 KAmicroprocessor releaserange 80- 200A, 06 nosDV2-250N, MCCB100A, 4 Pule, 50KAmicroprocessor leaserange 40-100A isoutgoing with 2nos.Ameter (0-500V), 02nos, multifunctionmeter (0- 1000A) withSelector Switchesincluding copperbusbar, bus chamber,indication lamp:06nos. Steel Structureetc. of suitable size tohouse all aboveequipmens, completein all respect,Including painting,testing &commissioning etc.Degree of protection:IP- 54, made of CRCAsteel sheet (loadbearing member-2mmthick, non load bearingmember- 1.6mm thick,gland plate - 3mmthick), Powder coatedpaint finish withnecessary surfacepretreatment 60 - 70microns), CopperBusbar of suitable size,for phase & neutral-60mm x 10mm size(min.) and for earth-60mm x 6mm size(min.), covered withPVC Coloured coatedheat shrinks sleeves,Bottom cable entlywith glands, completein all respect. All theclearances betweenphase to phase, phaseto neutral, panel bodyto live parts etc.should be maintainedas per latest relevantIS standard. [Make:ACB/MCCB & its:accessories L&T, C&S,Schneider, Legrand,Siemens. Voltmeter,Ammeter, CT,Indicating lamps,Selector switches etc -ISI Approved). | Numbers | 1.00 | 8,19,901 | 8,19,901 |
| 3 | Supply, Installation, Testing &Commissioning of APFC Panel,Thyristorised with 7% detuningReactors, Gas Filled Capacitors, BusBar: Cu, with appropriate incomer &step protections, Compartmentalized &Rack Design module with load sensingCT etc complete in all respect includingnecessary civil trenching work ifrequired as per specification givenbelow-400 kVAR, System Voltage:565V, Capacitor Voltage: 680V,Capacity @ 680 V, Steps: 16 APFCR:16 Step 3Phase. Make- Siemens,Epcos, ABB, L&T, Unistar, Schneider,C&S, TAS or similar. | Numbers | 1.00 | 9,66,136 | 9,66,136 |
| 4 | Supply and erection of 3 Nos stationclass - 1 Zinc oxide Lighteningarrestor suitable for 3 wire 11 KV OHwith rated voltage 9 KV (RMS) withnormal discharge current rating of 10KA and complete with galvanizedclamping arrangement, GI bolts, nuts,washer as required conforming to IS3070-III-1993. Make- OBLUM/Lamco/Raychem/Elpro/Toshibaor similar. | Numbers | 2.00 | 20,563 | 41,126 |
| 5 | Supply, erection, connection andtesting of 11 KV standard Air breakGO switch 200 Amp with 03 nos.insulator rocking type 11 KV completewith fixing brackets and operatinghandle and other accessories andlocking arrangement. with 11 KV DO fuse unit 200Amp capacity channel type completewith necessary fixing brackets andother arrangement. Make of insulator of GO switch-ABI/MIL/IEC/Raychem or similar . | Numbers | 4.00 | 27,200 | 1,08,800 |
| 6 | "Supply, Installation, Testing &Commissioning of End termination of3 core 150 Sqmm. HT XLPE insulated11 KV (E) grade AL cable with coldshrinkable indoor type cable box ofapproved make conforming to relevantIS (Latest version) with supply ofmaterial including testing andcommissioning of size 150 sq.mmcable make- M seal/Denison orSimilar. | Numbers | 8.00 | 4,831 | 38,648 |
| 7 | Supply, erection, testing andcommissioning of 600mm. x 600 mm.x3.5 mm. copper plate earthing as per drawing and technical specificationshown in Annexure attached in tender document. | Numbers | 8.00 | 12,436 | 99,488 |
| 8 | Supply, erection, testing andcommissioning of 25 x 3 mm. copperstrip as per technical specificationshown in Annexure attached in tenderdocument. | Metre | 120.00 | 725 | 87,000 |
| 9 | Supply Installation, Testing &Commissioning of 24" heavy duty BLDC air circulator wall mounting fan with all necessary fixing connection as per site requirements. | Numbers | 45.00 | 12,153 | 5,46,885 |
| 10 | Supply Installation and commissioning of 150 watts "Dazzle" Industrial LED Highbay light similar to Bajaj. As per technicalspecification attached. | Numbers | 70.00 | 16,818 | 11,77,260 |
| 11 | Supply, installtion, testing and commissioning of LED Pit light (Pillar Light) of System wattage- 22 watt ± 10% , operating voltage - 40V-72 V AC, 50HZ, CRI70, System lumens output-1600 lm - 1700 lm, IP67 etc. with GI wire mesh cage protection as per instruction of Engineer/incharge at site. | Numbers | 150.00 | 4,354 | 6,53,100 |
| 12 | Supply, installation, testing &commissioning of Transformer having Input Voltage: 230 Volt ,output Voltage:48 Volt, of 25KVA Capacity, 50 Hz. Dyn-11,oil cooled, Aluminium Wound as per instruction of Engineer/incharge at site. | Numbers | 2.00 | 37,082 | 74,164 |
| 13 | Design, manufacture, supply, testing and commissioning of constant currently constant voltage charger for VRLA as per RDSO specification no. RDSO/PE/SPEC/AC/008 Rev-1/ August 2004 for train lighting application. | Numbers | 2.00 | 4,89,700 | 9,79,400 |
| 14 | Supply, installation, testing & commissioning of precooling point consisting of IP 65 poly carbonate modular DB which is shock proof, insulated,weather proof, rust proof, dust proof, halogen and silica free and having internal gasket technology with 4 nos. Bus bar150 amps made of electrolytic grade copper fitted with 125A,FP, 36kA, MCCB - 1 no. withspreader terminal and 125A, 5P,IP67, Plug & Socket - 1 no. , 15A power socket with copper connecting wire as perinstruction of Engineer incharge at site. The DB should have mounting channel at back for fixing arrangement. It should have separate cable junction box at the bottom separately | Numbers | 10.00 | 30,541 | 3,05,410 |
| 15 | Supply and run of 2 nos, 4.0 sqmm, 1100 V PVC (FRLS/FRLSH) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS/FRLSH) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendement. | Metre | 2500.00 | 160 | 4,00,000 |
| 16 | Design, manufacturing, supply, testing, erection and commissioning of LT panel, medium voltage:- (a) Incoming 1 x 400Amps. 4 pole MCCB with adj .overload and adj. short circuit trip unit and breaking cap 50 kA (Ics = 100% Icu). (b) Outgoing 2 x 200 Amps. and 2 x 160 Amps. 4 pole MCCBs with adjustable overload and adj. short circuit trip unit and 2 x 125 Amps. 4 pole MCCBs with adjustable overload and fixed short circuit trip unit breaking cap. 36kA (Ics = 100% Icu) as per technical specification. | Numbers | 2.00 | 1,62,298 | 3,24,596 |
| 17 | Supply and installation of DPX3 160 thermal magnetic based release ; Icu = 36K A; 100A 4 Pole MCCB confIrm to IEC 60947-2 of model no. 4200 95 of Legrand make or equivalent make with extended ROM , spreader links (2 sets) with encloser. | Numbers | 10.00 | 9,604 | 96,040 |
| 18 | Supply, fixing,testing & commissioningof MCB DB three phase with RCCB, in m.s. enclosure,out door type, I/C- FP MCB of 63A - 1No. & FP RCCB of 63Amp - 1Noand O/G: SPMCB of 10-32Amp - 12Nos, | Numbers | 10.00 | 7,136 | 71,360 |
| 19 | Supply of Emergency feed terminal (EFT)including box with FRP base for 110 Vcoaches made of cast iron as per Drg. No.RDSO, Drawing no: SKEL 3929 (110V) | Numbers | 12.00 | 1,134 | 13,608 |
| 20 | Supply , Erection testing & commissioning ofwelding feed terminal DB of capacity 200Acurrent in MS box with 2 welding terminalstud with fly nut etc & 2 Nos. fuse link of315A capacity approved by Rly. | Numbers | 10.00 | 3,975 | 39,750 |
| 21 | Supply, fixing,testing & commissioning of outdoor type LED tube lightluminaires 2x18W (each20Wmaximum), 4ft long, whether proof having P65/66 protection, System efficacy greater than orequal to 110lm/W,Luminaires must be capable of delivering minimum 4000 lumens,luminaires complete with all accessories. | Numbers | 90.00 | 1,949 | 1,75,410 |
| 22 | Design, Supply,testing & commissioning of floor mounted Polycarbonate feeder post of out door type IP-65 of size 500x985x620 mm deep complete with copper bus bar four nos duly grouted with cement concrete ratio 1:2:4 duly earthedwith earthing terminals. Thermoplastic Polycarbonate IP 65 in accordance with EN 60 529 (Dust Proof, Water Proof & Weatherproof), Shock proof, Rust Proof, Corrosion Free, Acid & Chemical Resistant, Fire Retardant & Self Extinguishing, Silica and Halogen Free recyclable material conform to RoHS directive 2002/95/EC, UV resistant according to IEC 61439-1, having high grade internally embedded gasket made of Polyurethane ( PUR ), Glow wire tested at 960°C in accordance with IEC 60 695-2- 11.Type tested as per IEC 61 439-1. Total Insulated with System. The manufacturer of Polycarbonate feeder post shall submit a copy of CPRI test report of Degree of Ingress Protection IP 65 in accordance with IEC 60529. Each enclosure should have multi no of self threaded holes. Impact strength should be Ik- 08 in accordance with IEC 62262. (The copper Bus Bar will be of 300 Amps rating) as per attached drawing & max input cable size 4Cx150 SQMM. Make Hensel or Similar. | Numbers | 4.00 | 33,730 | 1,34,920 |
| 23 | Supply and fixing of 120W LED Flood light fitting with all connected materials complete as per attached railwayspecification. | Numbers | 40.00 | 5,562 | 2,22,480 |
| 24 | Supply and erection of 350W LED flood light with all connected materials as per attached railway specification. | Numbers | 30.00 | 18,241 | 5,47,230 |
| 25 | Supply and Erection of HDPE pipe of 40 mm of PE 63 grade, PN8 as per IS 4984-2016 with latest amendments andwith suitable couplings and clamps for cable laying with all necessary accessories complete. | Numbers | 1500.00 | 125 | 1,87,500 |
| 26 | Supply and Erection of HDPE pipe of 75 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments andwith suitable couplings and clamps for cable laying with all necessary accessories complete. | Numbers | 1000.00 | 239 | 2,39,000 |
| 27 | "Supply, erection, testing and commissioning of pipe earthing arrangement as per IE rules & Rly. Drawing for suitable earth resistance value and all other accessories required ." | Job | 20.00 | 2,437 | 48,740 |
| 28 | supply, laying and jointing of GI strip of size- 25x3 mm. with PVC sleeve on walls, ceiling etc. for providing interconnections for different panels and transformers to earthing. GI strip should be connected with necessary non rusting clamps, washers, nuts and bolts etc. | Metre | 500.00 | 41 | 20,500 |
| 29 | "Excavation of cable trench in soft morrum plain ground concrete/pucca surface etc and back filling of cable for laying of HT/LT cables including placing of bricks in cross position etc." | Metre | 2000.00 | 92 | 1,84,000 |
| 30 | Laying/Cleating of LT cable 03/04 core on wall with all accessories ( Cable will be supplied by Rly. Free of cost atconsignee depot). | Metre | 5000.00 | 41 | 2,05,000 |
| 31 | Making of horizontal boring to track formation below 3.0 meter from track formation level including DWC/HDPE Pipe upto 200 mm dia. In critical case (hard rock.) | Metre | 400.00 | 6,003 | 24,01,200 |
| Schedule total | ₹1,91,77,772 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022.pdf
ATTACHMENT
CorrectionslipsGCC2022.pdf
ATTACHMENT
AnnexureB.pdf
ATTACHMENT
AnnexureC.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
AmdmntNew.pdf
ATTACHMENT
TenderDoc-T-16-2026-27.pdf
ATTACHMENT
TECHSPECOFCSS.pdf
ATTACHMENT
1MVACSSSpec..pdf
ATTACHMENT
Highbaylight.pdf
ATTACHMENT
Copperearthing.pdf
ATTACHMENT
LTPANELSP.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .