SPL REPAIR TO STORAGE YARD (T-1462, T-1458, T-1463, T-13 TO T-18) OF BSO UNDER GE HISAR AT HISAR MIL STN

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F of steel work in tubular trusses and tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 including one shop coat of zinc chromate primer paint including preparation of surface complete all as specified and as directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F Mild steel, plain, black sheet 1.25mm thick in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and welded to steel framing including bending or turning up, mitred angles, etc. as required complete all as specified & directed.

S&F mild steel window with side hung shutter incl projecting type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded as required complete all as specified & directed.

S&F mild steel window with side hung shutter incl projecting type hinges with steel handle and steel peg stay complete without glazing complete with glazing bars, dovetailed or welded as required complete all as specified & directed.

M&L PCC type C1, 1:3:6 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, hold fast blocks, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L preparation of new steel or Iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L one coat of synthetic enamel paint (1st grade quality) to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete all as specified and as directed.

S&F Powder coated aluminium frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. (Thickness or powder coating not less than 50 micron) complete all as specified and as directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F Powder coated aluminium window, ventilator shutters fixed type and room partition (fixed portion) without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, Powder coated aluminium snap beading, screws etc. complete all as specified incl provision of cooler/AC opening (as per requirement) (Thickness or powder coating not less than 50 micron) complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1no). hinges type B-21 100mm long (2 no.) suitable handle (1no.) (Thickness or powder coating not less than 50 micron) complete all as specified and directed.

S&F 140 mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.

S & F in repairs 20mm dia curtain rails, mild steel, chromium plated with fixing brackets of fancy type complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified and as directed.

S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified and as directed.

S&F 100 mm long, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F Mortice lock, vertical type, size 65 mm, brass 04 levers complete all as specified and directed.

S & F Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with Stainless steel wire staples complete all as specified and as directed.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed omplete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridges hips valleys as in roof covering complete all as specified and as directed.

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

S &F 2 mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etccomplete all as specified and as directed.

S&F of pre painted galvatume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and ountersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. WIND TIES for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-16. complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/ blankets any thickness and wall paneling including cover fillets complete all as specified and as directed.

S&F for GI frame work for ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre with GI Cleat and steel expansion fasteners with and including ceiling section ( not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed tothe intermediate channel with connecting clips acrośs the intermediate channelat 45mm ceṇtre including 4mm thick non asbestos fibre cement building E boards fixed or laid/inserted toGI framework with screws for fixing in 600 mm x 600 mm grid, complete all as required at site complete all as specified and directed.

S&F 5-7mm thick hollow PVC wall lining, (Panelling) single side prelaminated with flat or fancy patterned on laminated side, PVC sheet inclusive of fixing with screws or with solvent cement required at site on walls including necessary corner angles, fillets etc required at site complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 m and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and as directed.

M & L for brick work with sub-class ‘B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:4) complete all as specified and directed.

M&L for TMT mild steel bars 10 mm dia and over, cut to shape required, including cranking, bending sprally for hooping for coulmns, hooking ends and binding with and including mild steel (annealed) not less than 0.9 mm dia or secuing with clips complete all as specified and directed.

M&L for TMT mild steel bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to shape required, including cranking, bending sprally for hooping for coulmns, hooking ends and binding with and including mild steel (annealed) not less than 0.9 mm dia or secuing with clips complete all as specified and directed.

Use and waste of formwork to rough finished flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M&L for cement concrete design mix M-30 (20 mm graded aggregate) for slabs supported on walls, beams and collumns in floors, roofs, landings, balconies, canopies , deck slabs and in the shelves and the like and all other similar works complete all as specified and directed.

M&L for self adhesive bitumen waterproofing APP polymer 3mm thick even membrane weight not less than 3.00 Kg/Sqm duly sealed with 100mm wide sealing tape incl applying a coat of aluminium paint over a coat of cold emulsion primer at over laps joints with flame ( complete by torch application) all as per manufacturer's instructions, complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only integral water proofing compound.

M&L for Complete removal of existing treatment of any type from old surfaces of walls complete all as specified and directed.

M & L for applying one coat of distemper oil emulsion on surfaces of completely removed existing treated wall complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash.on ceiling complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash on wall complete all as specified and directed.

M & L for preparing old completely removed existing treated plastered surfaces of walls and applying two coats of white wash on wall complete all as specified and directed.

M & L for preparing surfaces of external walls (newly plastered or completely removed existed treatment) and applying two coat of premium weather proof exterior emulsion paint over two coats of premium water proofing putty on external walls of approved make and color/shade complete all as specified and as directed by the Engineer - in - Charge. Note:- the above mentioned complete description/job will be executed by the approved genuine company/agency including labour and material and a minimum warranty of 5 years complete all as specified and directed.

M & L for preparing surfaces of external walls (old plastered or completely removed existed treatment) and applying two coat of premium weather proof exterior emulsion paint over one coats of premium water proofing putty on external walls of approved make and color/shade complete all as specified and as directed by the Engineer - in - Charge. Note:- the above mentioned complete description/job will be executed by the approved genuine company/agency including labor and material and a minimum warranty of 5 year complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes complete all as specified and directed.

M & L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 1st quality, 450X 350X 7mm / 300mm x 450mm x 7mm thick , on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over complete all as specified and as directed.

M & L 18 to 20mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Marble/granite including moulding to the edges to shape of bull nose complete all as specified and as directed.

Labour only for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L 40 mm thick plain cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in floor etc, finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

M & L 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement complete all as specified and directed.

M&L broken stone or boulders for hard core of guage n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified & directed complete all as specified and directed.

M&L for 75 mm thick cement concrete type D2, 1:4:8 using 40mm graded stone aggregates as sub base to floor, complete all as specified and directed.

M&L for coloured chequred tiles, glossy finish, 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & pigment, laid over & including 15mm thick screed bed in cement & sand mortar (1:4), complete, all as specified & as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast conctete coloured interlocking paver block any shape and size fixed with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed.

M & L plain cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) cast in situ in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work complete all as specified and as directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and connection complete for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Taking down 15mm bore steel/ composite/ CPVC water tubing and connection from any position wall /ceiling surfaces or concealed including cleaning for re-fixing or removing from site of work complete all as specified and as directed.

S&F 3- layer PP-R Polypropylene random copolymer) 20mm outer dia concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded fitting polypropylene laid in floor/wall/ceiling complete all as specified and directed. Note : Work will be done under authorisd company supervision complete all as specified and directed.

S&F in repair gun metal globe gate valve 20 mm bore.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20 mm bore pipe.(Make :- "Sintex") inculding dismantling of old water Tank complete all as specified and as directed.

Taking down soil/waste/vent and rain water pipes including all fittings of any size and pattern in any position complete all as specified and directed.

S&F 50mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F 50mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm laid (concealed) in trenches after Cutting chases, pinning in and making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, for drain/spouts pipes or other purposes for waste water etc., and making good, cutting not exc 10 cm girth to concrete surfaces/walls,ceilings or in floors/sunken floors etc, complete all as specified and directed.

S & F 75 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints fixed to wall including necessary nails, plugs and holder bats etc complete all as specified and directed.

S & F 75 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints laid in trenches or in floor (concealed) after Cutting chases, pinning in and making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, for drain/spouts pipes or other purposes for waste water etc., and making good, cutting not exc 10 cm girth to concrete surfaces/walls,ceilings or in floors/sunken floors etc, complete all as specified and directedincluding necessary nails, plugs and holder bats etc complete all as specified and directed.

S & F 110 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints fixed to wall including necessary MS flat Iron clamps of size (40 x 4mm) complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) bends provided with access door of any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.

S&F PVC (SWR) junction, single, (single T) equal or unequal 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction, single, (single T) equal or unequal 75mm bore complete all as specified and directed.

S&F in repairs, PVC (SWR) 75 mm dia, floor trap, plain grating with/without hole including jointing to waste pipe with solvent cement complete all as specified and directed.

M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

S & F in repair Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and seat cover with Mild steel chromium plated hinging device complete all as specified and directed.

S& F in repair 15 mm CP 2-in-1 stop cock/bib tap fancy type for fixing of health faucet or jet spray for the WC and complete all as specified and directed.

S& F in repair Brass SS Jet Spray with 1 m pvc tube and complete all as specified and directed.

S&F in repairs health faucet 15mm bore with 1.0 m tube & hook (Braded tube) complete all as specified and as directed

S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed.

S & F in repair Vitreous China wash basin, white, flat back, size 630 x 450mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F 40mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm as waste pipe for WHB/Kithcen sink etc., fixed complete by cutting hole into or through brick wall built in CM by using appropirate bend or bottle trap, passing another side of wall, connecting to main waste pipe line and making good in CM (1:3) cutting not exceeding 10cm in girth complete all as specified and directed.

S&F 40mm Bottle trap of PTMT for WHB/Kitchen sink etc.. having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.

S&F 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repairs, 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F only 600mm x 450mm bevelled edge mirror of sellected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F corner glass shelf 300mm (with brass brackets) complete all as specified and directed.

S&F in repair Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated fancy type bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm Stop valves/angle stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including modular press steel with cover plate and frame, complete, all as specified & directed.

All as per item No. 106.00 (here-in-before) but for one fan point controlled by one Number one way switch.

All as per item No. 106.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board.

All as per item No. 106.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.

All as per srl item No. 106.00 (here-in-before) but for 15 Amp socket out let by using 2.50 sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed.

S&F modular type switch , flush type, single pole, one way, 5/6 Amp, 230 Volts all as specified & directed.

S&F modular type switch flush type, single pole, one way, 15 Amp, 230 Volts.

S&F modular type socket outlet multipurpose 3 Pin 5/6 Amp (with 2 pin outlet also) 230 volts AC complete all as specified and directed.

S&F modular type socket outlet multipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F in repair of modular type ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.

S&F in replacement LED lumianire 600mm x 600mm, capacity 35/36 Watt,(warm white / cool day light/ natural light) 220 V AC, surface mounted type with high efficiency PMMA diffuser soft glase free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flrxible copper conductor of suitable size complete all as specified and directed.

S&F in reapir of street light LED light fitting 20 watt,240V, 50 HZ, pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed.

S&F in repair of MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed.

S&F in repair of M.C.B. SPN, 240 Volts, 40 Amps breaking capacity 10 KA complete all as specified and directed.

S&F in repair of sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 1991 (Part-I) including taking out old existing earthing complete all as directed.

Supplying, laying, jointing, testing and commissioning of LT UG XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volts grade complete of size 16 sqmm 2 core all as specified and directed. (Note :- cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc complete all as specified and directed by Engr-in- Charge.

Excavation in trenches in soft/loose/hard/dense soil n exc 1.50 meter wide and n exc 1.50 meter in depth for foundation of pole, laying cable etc and getting out etc complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm thick etc complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point etc complete all as specified and directe.

M&L for brick covering to underground electric cable using sub class ‘B’ bricks, laid dry, flat, perpendicular to the direction of cable etc complete all as specified and directed.

M&L for Sand cushioning 230mm thickness with dry sand (one layer of 80mm thickness before laying of cable and other layer of 150mm thickness after laying of cable) and punned down to 180mm after laying of cable in trenches for protection of cable complete all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

S&F down rod suitable for ceiling fans for extension from ceiling of 1meter length complete all as specified and directed by Engr-in- Charge.

S&F sheet metal enclosure Double pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB

M&L in repair Sub main wiring using two single core cable PVC insulated unsheathed of copper conductor FRLS cable of size 4 sqmm, 1100 votls grade drawing through and including PVC conduit 25 mm dia including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 4 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed including taking down old unserviceable submain wiring. Note:- Two lengths of 4.0 Sqmm cable, one length of 4 Sqmm cable and one length of PVC conduit will be measured as one length.

Please Enable Macros to View BoQ information