Construction of CC road from the house of Niranjan son of Fateh to the plot of Dharampal son of Hari Singh in Taja locality in village Surana.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.DSR-2023 S.I.No.16.83

Earth work in Excavation in foundation in ordinary soil loam,clay or sand)including lift up to 1.50 m and lead up to 30 M. and including filling watering and ramming of excavated earth in to the trenches or in to ht plinght and romval and disposal of surplus earth as per directde by thd Engineer in charge up to a distance of 30 M. from the foundation trenches. as per UPPWD SOR-2020 No-251(a)

Earth work in cutting or in embankment in oridinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and and earth work in cartage upto 10 km.including remming and dressing the surface to required levels and slops and also including 1.50 M lift and 30 M Lead . The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30 M. as directed by Engineer in charge excluding royality as per UP.PWD.SOR-2022 S.I.No-253(a).

Construction Of Granular Sub Base By Providing well Graded Material Spreading In Uniform Layers With Tractor mount Grader On Prepared Surface, Mixing by Mix In Place Method Tractor With Rotavator at OMC, and Compacting With Three wheel 80-100 KN Static Roller To Achieve The Desire Density, Complete as per Clause 401. As per MORD Analysis.

M-150 Brick work with 1:4 cement &coarse sand mortor in foundation and plingth including supply of all material, labour t&p etc . required for proper completion of work . as per UP.P.W.D.SOR-2022 S.I. No-305 (a).

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with Three wheel 80-100 KN Static Roller in stages to proper grade and camber, applying and brooming,requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404.G-3

Construction of un-reinforced, Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M-30 (grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels , rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contracton and expansion, construction joints applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints admixtures as approved, curing of concrete slabs for 14-days, lines and grade as per drawing and Technical Specification Clause 1501(Rates are including all Taxes but excluding GST) as per UP.P.W.D.SOR-2022 S.I.No.20.11 (a) New Item

12 mm thick plaster over wall of 1:4 cement & coarse sand mortar including supply of all materials, labour and t&p etc. as per UP.PWD.SOR-2022 S.I.No. 584.New item.

P/Laying of cement concrete with 20 mm gauge stone ballast, coarse sand & cement in the proportion of 1:2:4 including supply of all materials, labour. Tools& plants etc. required for proper completion of work. As per UP.P.W.D.SOR-2022 S.I.No. 279(a).

R.C.C. work with cement, coarse sand and 20 mm gauge approved stone grite in proportion of 1:1.5:3 in R.C.C. columns excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 .W.G.G.I binding wire and centering and shuttering and supply of all materials and labour and T&P etc. as per UP.P.W.D.SOR-2020 S.I.No.283 a.

M.S. ( Tor steel or plain) in plain work such as R.C.C. Work Iincluding cutting bending to proper shape complete including supply of all materials, labour T&P etc. required for proper completion of work As per UP.P.W.D.SOR-2017 S.I.No.504.

Supply and fixing of M.S sign board.of prescribed size 1.20m *2.75 m with angle 40*40*6 mm iron angle and 1 mm thick ms iron sheet including painting and letter writing complete.approved rate as per S.E.R.E.D. Meerut.

Deduction-5% for Competitive Price Efficiency

Add GST 18% Rs

Please Enable Macros to View BoQ information