Construction of 4th floor for District Sports Complex Baramati Building, playground, Interior furniture, Eastern side retaining wall, Internal roads, rain gutters, parking, construction of pathways Taluka Baramati, District Pune.

Amount

Supply and Installation of BWF, FIBA, FIVB and IHF approved Gerflor make Synthetic Sports Flooring.7.5mm Thick Shock absorption under EN 14808 standard not less than 25%. Ball bounce under EN 12235 standards not less than 90%. Abrasion resistance as per EN ISO 5470-1 shall be 350 mg.Impact Sound insulation as per EN ISO 717-2 shall be 18 dB. Thickness-7.5 mm. Width - 1.5 mtrs. Length- Between 15 - 20 mtrs. The floor surface consists of 100 pure vinyl wear layer of 2.1 mm thickness upper surface treated with protecsol to reduce skin burn and sanosol to avoid fungal growth.Double fiber glass grid for sound stability on floor.CXPTM HD double density foam backing with D-MAXTM ensuring highest possible resistance to indentation durability and energy return. The surface to be laid with adhesive as per manufacturers instruction over existing leveled surface. The Rolls will be joined with seamless hot welding. Game line marking to be done as per client’s requirement. BWF (Badminton World Federation). FIBA (Federation International Basketball Association). FIVB (Federation International Volleyball). IFF (International Futsal Federation) FIFA (Federation Internationale de Futsal Association) IHF (International Handball Federation).

Supply and Installation of FIBA, WSF, IHF, BWF Approved 100% solid hardwood pre-finished (factory finish including polish) Area-elastic press drayed Maple Wooden sports flooring with Pad ideal playing surfaces, floor system should be according to EN 14904 class A4 as per specifications and conditions mentioned below: Technical Specification:- Prefinished Hardwood flooring 22mm thick for each individual strip. Minimum width of 129mm and 1830mm in length jointed together with the help of tongue and groove on all four sides of all board Solid Hardwood floor board should be prefinished to eliminate the risk of human error when sanding and lacquering on site and easy and fast installation. Shock absorption: - 67 %, Vertical deformation: - 3.0 mm, Ball bounce: - 93 %, Friction: - ~ 85, Rolling Load: - 3500 N1, Point load: - 5500N ~ 550 kgs² Substructure:- Substructure of solid wood flooring shall consist of sleeper of Spruce or Pine 60 mm wide and cross-section of 45 mm and laid perpendicular to the main flooring planks at a spacing 411 mm centre to centre attached including 19mm rubber pads on concrete base beneath the flooring system as a vapour barrier between the concrete and wood floor. Vapour Barrier:- 0.2mm polyethylene membrane installed over the concrete base beneath the flooring system as a vapour barrier between the concrete and wood floor. Solid hardwood floor should be the approved by following Federations:- System should is passed according to EN 14904 class A4 Should have been used in Olympic World Championship, Asian Games Etc.

Supply and installation of Synthetic Sport Flooring Model No.: BWF Grade 3 (A-21145), Game: Badminton, Shock Absorption Rate: >53%, Pattern: Sand, Thickness: 4.5mm, Color: Grass Green / Red, Vertical Deformation: 2.3mm, PVC wear-resisting coat: Super Endurance and Wearing Strength, Fiber-glass reinforced layer: Make the Flooring Non-shrinkable and Long Service Life, PVC wear-resisting coat: Super Endurance and Wearing Strength, PVC Foaming Buffer Layer: Good Performance in Rebounding and Shock Absorbing, Natural Raw Material, Eco-friendly, Durable Using, BWF certified, Competition flooring PVC, Installation - Vinyl flooring will be installed using Adhesive, Also known as glue-down, this method involves attaching the vinyl to the subfloor with the help of adhesive grooving will be done after laying of vinyl flooring The Rolls of vinyl flooring will be joined with the help of 5mm pvc seamless welding road with the help of hot welding mechine .

Providing & fixing factory-made safety fencing powder coated steel special connector, it includes 6 Mtr High with ladder back support up to 4.5m, ф 76mm (OD) 3 mm thick MS pipes, green powder coated factory finished post vertical post fixed on foundation with the help of J bolt Which supplied by us and fix by client as per our drawing. At 3.0mtr center to center distance, ф 60 mm (OD) 2 mm thick MS pipe Horizontal post, three horizontal post installed at Top middle and Bottom location for 6 mtr Height with the help of special connectors. Garware make 2” X 2” nylon Net to be used all sides of Fencing, fixed to vertical post and Three horizontal Supports with the help of 6mm thick nylon rope. special Connectors made from pressed steel and powder coated finish for connecting Vertical and horizontal post by using M12 X 90 carriage bolt at every joint and corner of horizontal and vertical post without welded joints for easy installation and removable. Entire material is sandblasted, Powder coating is done with high quality PP powder coating (Jotun PP powder) and finally tests such as scratch test, DP test (confirming coating thickness) and salt spray test are done to ensure quality check. Entire material comes with 2 years warranty on the coating.

Supplying, laying, fixing Multisport Artificial Turf 15mm thick in proper line, level including compaction, all laed, lift, labour, tarnsportation and mterail etc. complete Technical Specification - Product Name - Multisports 15mm , Application Multisports, Roll Width - 2 Mtr , Roll Length - 25 Mtr, Colour - 2 Tone YRAN Structure:Curl Composition(FIFA Test method 22) – PE, Dtex(FIFA Test method 23) - 5500 ±10%, Tape thickness(FIFA Test Method 25) - 0.67-0.75mm, Tape width(FIFA Test Method 25) - 0.15-0.15mm, Colour change(EN ISO 20105-A02) - ≥Grey scale 3, TURF Pile height（ISO2549): 15mm ±1mm, Gauge(ASTM D5793) : 3/16 inch, Stitch /10cm(ISO1763) 33 ±3%, Density/m²(ISO1763) - 69300 ±10%, Yarn weight(ISO8543) - 1,372g/m² ±10%, Tuft withdrawal force(FIFA TestMethod 26) - One tuft≥35N, Backing Primary backing: PP cloth + Mesh fabric , Weight : 175g ±10%, Secondary backing : Black SBR Latex , Weight : 1153g ±10%, Total weight(ISO8543) : 2700g/m² ±10%

Football Turf Master 50/130 FIFA Approved Providing & laying of FIFA-approved synthetic football turf surface pile height 50mm thick with 100% PE monofilament (straight) , 350-370 micron thickness, minimum 13900 dtex, tufted) and Stitch Rate 13 stitches per 10 cm (length) over existing sub base including marking on the surface complete as per FIFA Specifications. Including joined seams, turf saturation with minimum Quartz sand 0.3 – 1.2 mm and minimum 13 kg per m2 SBR granular infill according to manufacturers' specifications, infill levels no less than 75% yarn height including combing the field, inlaying of all lines with white yarn complete. Roll width to be a minimum 3.95m and length as per layout. The primary backing with SBR Latex weight not less than 221 g/m2 and Secondary Backing not less than 950 g/m2, Total Weight of Product 2,241 g/m2 (± 10 %) Complete. Product Should be UV Stabilisation (QUV – lamp A): 5,000 hours and Colour Fastness – Grey Scale: ≥ 4 tested and passed.

Unique Vastu Developers Private Limited (BID ID -6517172)

ALCHEMY SOLUTIONS (BID ID -6516965)

S S SATHE INFRA PRIVATE LIMITED (BID ID -6518415)

Freewill Infrastructure Pvt. Ltd (BID ID -6503933)

SAM SPORTS (BID ID -6513647)

S G Enterprises (BID ID -6519081)