Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.6 LAccepted-AOC | L1 | Accepted-AOC L1 |
Tender Value
₹10.3 L
EMD Value
₹21,000
Closing Date
24 Aug 2020, 5:00 pmClosed
Rajesh Ahuja
XEN(E) Rewari
CONSTRUCTION OF PRIMARY HEALTH CENTRE BUILDING WITH RESIDENTIAL ACCOMMODATION AT VILL. MASANI IN DISTT. REWARI (PDG. ELECTRIFICATION ONLY).
2020_HRY_139484_1
PWD/Rewari/Aug01
Open Tender
Electrical Works
Works
90 days
XEN(E) Rewari
Refer Dnit
2 documents required · 2 mandatory
₹1,000
Executive Engineer, Electrical Division
₹21,000
1 Apr 2022
18 Aug 2020
25 Aug 2020
18 Aug 2020
24 Aug 2020
18 Aug 2020
Amount
Wires and Cables Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Make : R R cable/ Havell's/ Polycab Size 1.50 sqmm ( 48 / 0.20mm).
Main Switches.Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections .Double pole switch 32 amp. 415 Volts Cat-B
Double pole switch 63 amp. 415 Volts Cat-B.
Triple pole switch with neutral link 63 amp. 415 Volts Cat-B.
Moulded case Circuit breakers.Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.15 amp.to 60 amp. 415 V ,10 KA 3-phase.
Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide.Size 40 mm x 40 mm x 6 mm.
M.S.Sheet .Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.
Distrubution board with plug and socket.Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc.S.P.N. enclosure for single pole MCB 20 amp.
Blanking sheet .Supply and erection of blanking sheet in existing distribution board.
Miniature Circuit Breaker and Isolator.Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections.Miniature circuit breakers of 9 KA breaking capacity.SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.
TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp.
Supply and erection of Fittings and Accessories.Call bell 220 / 230 volts A.C. bakelite with double coil.
Bell push flush type ( without flexible wire ) in existing sheet.
Bakelite angle / straight button holder large size.
Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point.
Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.
Erection and carriage of fans.Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.
Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work.
Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick.
Pipe Laying.Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required.Galvanised iron pipe 50 mm dia on flushed.
Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.
Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.
Galvanised iron flexible pipe comlete with socket nipples and checknuts etc. at both ends ( upto length of 1 metre.) Size 25 mm dia.
For additional length of Galvanised iron flexible pipe more than 1 metre ( the payment is to be mAde for additional length of pipe more than 1 metre only in item no. xxvii ). Size 50 mm dia.
Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 120 mm dia.
PVC pipe 65 mm dia.
Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .
Extra for using salt and charcoal / coke for pipe earth electrode as required.
Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coke and salt) complete as required.
Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.
Pdg. and fixing 25 mm x 5 mm copper strip in 50 mm dia G.I. pipe from earth electrode as required .
Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .
Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.
Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required .
Under Ground Cables. Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections,digging and refiling of trenches. 10 Sq. mm 2 Core Ard Cable .
16 Sq. mm 2 Core Ard Cable .
Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections . 10 Sq. mm 2 Core Ard Cable .
25 Sq. mm 3.5 Core Cable .
10 Sq. mm 4 Core Cable .
Supply and erection of suitable compression type brass cable glands for underground Cable.10 Sqmm to 16 Sqmm Cable 2 to 4 Core .
Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt, housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections .
Miscellaneous .Supply of M.S.pipe (B-Class) for suspension rod of ceiling fan including threading if required. 15 mm dia.
Supply and erection of caution notice plate in three languages.
Supply and erection of shock restoration chart in glass frame
Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of bakelite sheet .
PVC Insulated wiring in recessed conduit. Wiring in 1.5 sq.mm PVC Insulated copper conductor cable in 1.6 mm thick conduit pipe.Fan Point Medium Point .
Long Point .
Light point Short Point
Medium Point .
Long Point .
Twin control light point with 2 way 5 amp. single pole switch Short point.
Long point.
Call bell point including M.S box of size 180 mmX100 mmX 60 mm deep for Call bell Long point
3 pin 5 amp. plug point including earthing the 3rd. pin etc.Short point.
Long point.
3 pin 15 amp. plug point including earthing the 3rd. pin etc. with 4 sq mm PVC insulated copper conductor cable. Long point.
Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe.Cable size 1.5 sq.mm(3/ 0.81 mm)
Cable size 4.0 sq.mm(7/ 0.85 mm)
Cable size 6.0 sq.mm(7/ 1.05 mm)
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.12 way SP&N (Horizontal)
16 way TP&N (Horizontal) (8 + 48)
Supply & erection of PVC conduit pipe ISI marked(Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection boxe and all other material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.20 mm dia.
Supply and erection of M.S Saddles and clamps on wall/RCC parapit for fixing the under ground cable at a distance of .60 metrecentre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect.
Supply and erection of 50mm diameter 1.5mtr. Long GI bracket (B-Class) making an angle 10 to 15 degree with horizontal plane for mounting street light fitting on GI bracket on wall with 2 Nos. 50mmx3mm thick MS flat including cost of cutting welding of GI pipe complete with cement sand mixture bolts and nuts etc. including making necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-charge of the work.
Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work.
S/E of Hot Dip Galvanized octagonal pole of 3 mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. the foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement, Terminal plate consisting of 2 nos. 100 A, 4 pole natural links inclding connection etc. with suitable connecting arrangement for 2 nos. MCBs/ kit- kat including cost of RCC 1:1.5:3 for foundation of size 0.7 m x 0.7 m x 1.8 m with minimum 8 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C. for fixing the pole with all labour& material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work.7 Mtr. Long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 x 220 x 12 mm
Supply and erection of moulded case circuit brecaker single pole/ 4 pole on wall/ on existing pedestal including bounding to earth and making necessary connection required to complete the job the job in all respect up to the entire satisfaction of the Engineer -in - Charge of the work.4 pole MCCB 200 amp.
Supply & erection of MS box of size 8"x10"x4" (20 cm x 26cm) and 20 cm deep made of 1.6 thick MS sheet covered with 5 mm thick bakelite sheet for fixing of 4 no socket & switch of 6 amp. and one no. multi socket & switch of 15 amp. including fixing of one no. the MS box is recessed in wall including cost of necessary cement sand and mixture required to complete the job in all respect with cost of necessary labour charges for fixing the bakelite sheet and complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.
Supply and erection of 60W LED fitting model no. Endura Pearl plus 60 W LED 757SASY TOPC, energy saving and environmental friendly long life LED street light made up of pressure dia cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening seprate driver compartment with 1P66 protection and impact resistance of 1K07 with 10 KA built in surge protection device suitable for pole dia 54 mm maximum complete in all respect up to the entire satisfaction of the Engineer-in-charge of work Make Havells/Crompton/Bajaj/Jaquar/Surya.
Supply and erection of single arm bracket made of 50 mm dia G.I pipe B class ISI 1.5 mtr. long with 25 mm dia G.I. bottom pipe with 75 mm dia 60 cm. long G.I. collar pipe, top covered with ornamental cap duly welded, painted 2 coats of aluminium paint on bracket and golden paint on ornamental cap including erection of same with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.Single arm G.I. bracket
Supply & erection of Coral opal -IP65 gate light fitting Havell's make Model no. Coral PT 25W LED 757 PSYMTOPC. New generation post top energy saving envirnmental friendly, long the aesthetically designed with symmentrical light distribution spun aluminium land scapluminiarewithhigh power LED's as light source complete in all respect up to the entire satisfaction of the Engineer-in-charge of workMake Havells/Crompton/Bajaj/Jaquar/Surya.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .