Providing Partition for making Kitchen cabins in Field Hostel- A and B Block Rooms and Early Warning system in pantry room of office building Block -1 at Kiru HEP, Pathernakki, Distt Kishtwar

Amount

Providing and fixing alumunium work for doors ,windows and ventilators and partitions with extruded built up stanadard tubular sections/appropriate z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixed with dash fasterner of required dia. and size including necessary filling up of gaps at junctions i.e, at top , bottom and sides with required EPDM rubber/ neoprene gasket felt etc. Aluminium sections shall be smooth,rust free, straight,mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/panelling, c.p brass/stainless steel screwa , all complete as per architectural drawings and the directions of engineer - in - Charge ( glazing, panelling and dash fasteners to be paid for separately.)

For fixed porition :- Powder coated aluminium ( minimum thickness of powder coated 50 microns)

For shutters of doors , windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubeer/neoprene gasket required ( fittings shall be paid for separately.) Powder coated aluminium (minimum thickness of powder coated 50 microns.)

Providing and fixing 12 mm thick prelaminated particle board ( conforming to IS : 12823 Grade - l type - II) in panelling fixed in aluminium doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer - incharge.

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing ISI marked Aluminium ( anodised tower bolts anodic coating not less than grade 10 AC as per IS:1868 ) transparent or dyed to required colour and shade with necessary screws complete. (150x10 mm)

Providing and fixing ISI marked Aluminium handle anodised ( anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. (125 mm)

Providing and fixing aluminium hanging floor door stopper ISI marked anodised ( anodic coating not less than grade AC 10 ) as per IS 1868 transparent or dyed to required colour and shade with necessary screws complete twin rubber stopper.

Providing & fixing IS:3564 marked Aluminium extruded section body tuburar type universard hydraulic door closer ( having superior brand) embodssed on the body door weight upto 36-80 kg and door width 700-1000mm with double speed adjustment with necessary accessories and screws complete.

Providing & fixing bright finished 100mm Mortice latch and lock ISI marked with 6 lever and a pair of anodised aluminium lever handles ( anodic coated not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws complete best make of approved quality with necessary screws etc. complete.

Providing & fixing panelling or panelling & glazing in panelled or panelled & glazed shutters for doors, windows & celrestory windows ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick prelaminated particle board with decorative lamination on both sides , grade 1, type II IS 12823 marked (12mm thick )

Ravi Kumar Shan

Javeed Iqbal Ahanger