SPL REPAIR TO INTERNAL ROAD FROM RO PLANT TO MT PARK INSIDE AREA OF MT AREA ALONGWITH ROAD SIDE FURNITURE AT 5 PARA (SF) UNDER GE (EAST) AGRA

Amount

M&L for repair potholes any depth, not exc. 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc but making good by applyig tack coat @ 5 Kg / Ten sqm puttings premixed bitumen macadam well ramming and sealed with binder 9.8 Kg per 10 Sqm binded with 0.09 cum of stone chipping 6.3 mm size and again well rammed (including supply of premixed macadam binder and chipping) depth of pot holes exc. 30 mm etc complete all as specified and directed.

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc & applying evenly a primer tack coat with bituminous primer using paving bitumen of grade VG-10 at the rate 5 Kg per 10 Sqm for laying premixed bituminious macadam premix carpet complete all as specified and directed

M&L for laying bituminous premix Asphaltic semi dense asphaltic concrete with using mechanical paver 30 mm thick consolidated thickness with using 5.5% binder content by weight of total mix, (Paving bitumen VG-30) rolled and compacted with 8 to 10 tonnes power road roller to required camber and gradient complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used, the rate shall be adjusted lower side of binder used however no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A' / BOQ

M&L for providing and applying 2.5 mm thick road marking strip / line (retro - reflactive) of specified shade / colour using hot thermoplastic material with glass beads by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispeser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of materials, labour T&P, cleaning the road surface of all dirt, seal, oil grease and foreign material etc complete as per direction of Engr in charge and accordance with applicable specifictions complete all as specified and directed.

Supply and fixing in repair solar cat eye any colour aluminium alloy shall (100% water proofing design according to 65) of size 125 mm x 125 mm (shank 65 mm) of high efficiency mono rystafie solar panel 2.4 V / 0.30 watt one NI-ed rechargeable battery (1.2 V / 1600 MA) consisting of super bright LED with 10000 to 18000 Mcd complete as per manufacturer instructions etc complete all as specified and directed.

S&F plastic speed bump is designed so dynamically and compact that it can bear maximum load on it. The body of the running speed dump is made of PE material. Two highly reflective reflectors moulded in PMMA material are welded with PE base plate through ultrasonic welding process and then fixed on to the speed bump so that dust and water cannot touch reflector's inside are and thus it maintains its reflectivity for a long time. it is available in yellow and black colours. Dimensions : Length 750 mm, Width 250 mm, Height 75 mm, weight and load capacity upto 100 tons complete all as specified and directed.

M/S Solanki Brothers

m/s shanti consruction co

M/s J S & SONS

Gupta Automobiles

C P Singh and Co

Attar Singh and Sons