Construction of Haluwa to Lakily Road from (Ch.0.00m to Ch 1170.00m) under SOPD-G for the year 2020-21 under Charaideo District Territorial Road Division, Sonari LAC.Pkg.No. SOPD-G/2020-21/CDTRD/SNI/01/RE

Amount

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thick ness as per Technical Specification Clause 201.0 i) By Manual Means A) In area of non-thorny jungle

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres. (iii)Dismantling stone Masonary (b). In Rubble stone masonary in Cement mortar

Removing alltypes of Hume pipe and stacking within alead 1000mincludingearth work and dismantlingof masonary works. (b) above 600 mm to 900 mm

Construction of embankment with approved materials obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compaction to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000m as per Technical Specification Clause 301.5. (i) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1. (i) Private Land

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with vibratory roller to achieve the desired density,complete as per cl. 401( with an initial lead of 5 Km.) i) for Gr. II material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compaction to the required density as per Technical Specification Clause 405. Gr.III

Providing and laying Inter Locking Concrete Block Pavement having thickness 80 mm as per Technical specification clause 1504 (including cost of edge restrain wall)

Providing and laying coloured Inter Locking Concrete Block Pavement having thickness 80 mm as per Technical specification clause 1504 (For APWD LOGO) (Rate as per Analysis, Annexure-II)

Painting lines, dashes, arrows, etc. on roads in two coats on old work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and technical specification

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc. II) Ordinary Kilometer stone (Precast)

III) Hectometer stone (Precast)

Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) (ii) 60cm equilateral traingle

ii) 60cm Circular

iv) 80cmm x 60 cm rectangular

Direction and Place identification sign upto 0.9 sqm size board : Providing and erecting Direction and Place identification sign upto 0.9 sqm size board reto Reflectorised sign as per IRC: 67 madeof high intensity encapsulated lense type reflected sheeting vide cl.801.3, fixed over aluminium sheeeting ...... as per approved drawing and sign (All steel work must be Tata/ SAIL or any other approved brand.)

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification clause 1104 including setting out, construction of shoring an bracing,removal of stumps and other deleterious matter,dressing of sides and bottom and backfilling with approved material . I.In ordinary soil, Upto 3 m depth.

Plain Cement Concrete M10(1:3:6 nominal mix) in levelling course below open foundation of Head walls as per drawings & Technical Specification Clause 802,803,1202 & 1203, A. With Crushed Stone PCC Grade M10, nominal mix

Bedding of pipe (ii) Type B (First Class) Bedding Laying (First Class) bedding on well compacted sand,moorum or approved granular material as per Clause 1105

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106.(B) 1000 mm dia(As per RR SOR,2013-14)

Filling in foundation trenches as per drawing and technical specification Cl.305.3.9 I. Sand filling (For 5 nos)

Brick Masonry Work in cement mortar in foundation of Head walls complete excluding pointing and plastering as per drawing and technical specification Clause 1109 (ii) Brick Masonry in 1.4 Cement mortar (For 5 Nos)

Plastering with Cement Mortar (1:3), 15mm thick on brickwork in substructure as per technical specification

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301

Providing and layin cement concrete wearing coat M30 grade including reinforcement complete as per drawing and technical specification clauses 800 and 1206.3 (A) With crushed stone

Construction of RCC railing of M25 Grade in -situ with 20mm nominal size aggregate, true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequat space between vertical posts of expansion,complete as per approved drawings an technical specifications.

Planting of Tree and their Maintenance for three Years:(Planting of tree by the road side (Average trees) in 0.60m dia holes, 1m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure,planting the saplins, backfilling the tranches ,watering,fixing the tre guatrd and maintenance the plants for three year

Construction of Foundation Stone with Brick masonary work in cement morter in foundation including plastering with cement mortar (1:4), 15 mm thick on brick work and painting with 2 coats of water based cement paint, and fixing black colour granite plate of size 1067 mm X 762 mm (3'6'' X 2'6'') with necessary letter writing (golden coloured) in groves on granite plate,boundary and logo of required size and numbers as desired by the department and as per drawing and directed by the department including providing with pandel of size 60'X40' with dias, arrangement of table & VIP chair 10 (Ten) nos. and plastic chairs 200 (Two hundred) nos. electric generator,temporary arrangement of fan and lighting, sound system etc. as desired by the department required for Foundation Stone Laying Ceremoney for public meeting to be addressed by VIPs with supply of package drinking water and refreshment.