Loading…
Loading…
Tender Value
₹23.4 Cr
EMD Value
₹13.2 L
Closing Date
17 Mar 2026, 3:00 pmClosed
Mahalaxmi :- Construction of 12 Units Type - VI Quarters, 23 Units Type - V Quarters & 03 Units Transit Quarters.(Composite Tender).
BCT-25-26-319
BCT-25-26-319
Open
24 Months
Mumbai, Maharashtra
₹0
₹13.2 L
18 Feb 2026
18 Feb 2026
3 Mar 2026
SUPPLY ARRANGEMENT WORK
Supply of material and providing light/fan point concealed wiring, with single core multi-strand
copper wire, PVC insulated
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
1 1 Supply of material and providing Numbers 1421.00 526.00 747446.00
light/fan point concealed wiring,
with single core multi-strand copper
wire, PVC insulated unsheathed,
LSHF / ZHFR, of size 1.5 sq.mm. for
phase, neutral & earth wire and
modular switches, complete with all
accessories, junction box, ceiling
rose etc, as per specifications in
Supply, fixing, testing & commissioning of call bell, and supply of material and providing concealed
wiring of call bell point
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of call bell, and
supply of material and providing
concealed wiring of call bell point,
with single core multi-strand copper
wire, PVC insulated unsheathed,
LSHF / ZHFR, of size 1.5 sq.mm. for
phase, neutral & earth wire, and
modular switches, complete with all
accessories, junction box, ceiling
rose etc., as per specifications in
Supply of material and providing main/ submain concealed wiring with single core multi-strand
copper wires, PVC insulated
S No. Item No Description of Item Unit Qty Rate Amount
1 3 Supply of material and providing Running 9873.00 111.00 1095903.00
main/ submain concealed wiring Metre
with single core multi-strand copper
wires, PVC insulated unsheathed,
LSHF / ZHFR, of size 2.5 sq.mm.,
with set of 3 wires for phase,
neutral & earth wire, as per
specifications in Annexure III.
Supply of material and providing main/ submain concealed wiring with single core multi-strand
copper wires, PVC insulated
S No. Item No Description of Item Unit Qty Rate Amount
1 4 Supply of material and providing Running 10878.00 155.00 1686090.00
main/ submain concealed wiring Metre
with single core multi-strand copper
wires, PVC insulated unsheathed,
LSHF / ZHFR, of size 4.0 sq.mm.,
with set of 3 wires for phase,
neutral & earth wire, as per
specifications in Annexure III.
Item- 5 Supply, fixing, testing & commissioning of modular socket 3 pin of
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of modular socket 3
pin of 10A capacity with 10A one
way modular switch, as per
specifications in Annexure IV.
Supply, fixing, testing & commissioning of modular power socket 3 pin twin heavy duty of 10/20 A
capacity with 20A one way
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
commissioning of modular power
socket 3 pin twin heavy duty of
10/20 A capacity with 20A one way
modular switch having neon
indicator, as per specifications in
Supply, fixing & commissioning of single phase 20A, 230V, DP industrial type socket outlet, with
phase, neutral & earth, metal
S No. Item No Description of Item Unit Qty Rate Amount
1 7 Supply, fixing & commissioning of Numbers 284.00 2489.00 706876.00
single phase 20A, 230V, DP
industrial type socket outlet, with
phase, neutral & earth, metal
enclosed plug top alongwith 20A DP
MCB in SS enclosure, as per
specifications in Annexure VI.
Supply and fixing of modular concealed mounting box of four module, with suitable modular base
plate and cover, for fixing of
S No. Item No Description of Item Unit Qty Rate Amount
concealed mounting box of four
module, with suitable modular base
plate and cover, for fixing of
modular switches, sockets etc., as
per specifications in Annexure VII.
Supply and fixing of modular concealed mounting box of six module, with suitable modular base
plate and cover, for fixing of
S No. Item No Description of Item Unit Qty Rate Amount
concealed mounting box of six
module, with suitable modular base
plate and cover, for fixing of
modular switches, sockets etc., as
per specifications in Annexure VII.
Supply and fixing of modular concealed mounting box of twelve module, with suitable modular
base plate and cover, for fixing of
S No. Item No Description of Item Unit Qty Rate Amount
concealed mounting box of twelve
module, with suitable modular base
plate and cover, for fixing of
modular switches, sockets etc., as
per specifications in Annexure VII.
Supply and fixing of modular concealed mounting box of sixteen module, with suitable modular
base plate and cover, for fixing of
S No. Item No Description of Item Unit Qty Rate Amount
concealed mounting box of sixteen
module, with suitable modular base
plate and cover, for fixing of
modular switches, sockets etc., as
per specifications in Annexure VII.
Supply, fixing & commissioning of MCB DB single phase with RCCB, I/C-DP MCB of 40A - 1No. & DP
RCCB of 40A - 1No., O/G: SP
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
1 12 Supply, fixing & commissioning of Numbers 2.00 6617.00 13234.00
MCB DB single phase with RCCB,
I/C-DP MCB of 40A - 1No. & DP
RCCB of 40A - 1No., O/G: SP MCB of
6A-32A - 8Nos, enclosure made of
non metallic polycarbonate
thermoplastic material, IP 65
weatherproof, as per specifications
in Annexure VIII.
Supply, fixing & commissioning of MCB DB three phase, I/C: MCB TPN 63A - 01 No & O/G: 1) MCB SP
10A- 04 Nos. 2) MCB SP 20A - 04
S No. Item No Description of Item Unit Qty Rate Amount
1 13 Supply, fixing & commissioning of Numbers 26.00 10660.00 277160.00
MCB DB three phase, I/C: MCB TPN
63A - 01 No & O/G: 1) MCB SP 10A-
04 Nos. 2) MCB SP 20A - 04 Nos. 3)
MCB SP 32A - 04 Nos., enclosure
made of non metallic polycarbonate
thermoplastic material, IP 65
weatherproof, as per specifications
in Annexure IX.
Supply, fixing, testing & commissioning of MCB DB, with m.s. enclosure, having DP MCB of 06Amp -
01No., DP MCB of 10Amp -
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of MCB DB, with
m.s. enclosure, having DP MCB of
06Amp - 01No., DP MCB of 10Amp -
01No., DP RCBO of 20 Amp - 01 No.
and FP RCBO of 40 Amp - 01 No.,
for electric supply to lifts, as per
specifications in Annexure X.
Item- 15 Supply, fixing, testing & commissioning of Geyser, storage type of
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of Geyser, storage
type of 06 ltrs capacity, as per
specifications in Annexure XI.
Item- 16 Supply, fixing, testing & commissioning of Geyser, storage type of
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of Geyser, storage
type of 10 ltrs capacity, as per
specifications in Annexure XI.
Supply of energy efficient BEE 5 star rated BLDC ceiling fan 1200mm (48") sweep, with down rod,
and standard accessories,
S No. Item No Description of Item Unit Qty Rate Amount
star rated BLDC ceiling fan 1200mm
(48") sweep, with down rod, and
standard accessories, fan &
regulator shall be compatible to
work with various makes & models,
as per specifications in Annexure
XII. (Minimum Warrantee - 2 years)
Item- 18 Fixing & commissioning of ceiling fan on existing M.S. hook
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
1 18 Fixing & commissioning of ceiling Numbers 55.00 50.00 2750.00
fan on existing M.S. hook, as per
specifications in Annexure XIII.
Item- 19 Supply, fixing, testing & commissioning of 5 step fan regulator
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of 5 step fan
regulator electronic modular
stepped type, compatible to work
with various makes & models of
BLDC ceiling fans, as per
specifications in Annexure XIV.
Supply, fixing, testing & commissioning of decorative type super energy efficient BEE 5 star rated
BLDC ceiling fan 1200mm (48")
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of decorative type
super energy efficient BEE 5 star
rated BLDC ceiling fan 1200mm
( 4 8 " ) sweep with down rod, and
standard accessories, fan &
regulator shall be compatible to
work with various makes & models,
fan as per sample approved, & as
per specifications in Annexure XV.
(Minimum Warrantee - 2 years)
Item- 21 Supply, fixing, testing & commissioning of super energy efficient
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of super energy
efficient BLDC motor industrial
exhaust fan of size 300mm (12")
sweep and standard accessories, as
per specifications in Annexure XVI.
(Minimum Warrantee - 2 years)
Item- 22 Supply, fixing, testing & commissioning of wall bracket fan of size
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of wall bracket fan
of size 16"/400mm sweep, 1350
rpm and BLDC motor, as per
specifications in Annexure XVII.
(Minimum Warrantee - 2 years)
Item- 23 Supply,fixing, testing & commissioning of LED reading light fitting
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of LED reading light
fitting of 3W (minimum), robust
driver with wide voltage range 100-
240 volts and inbuilt protection,
protected from dust and insects,
complete with cover/ accessories,
control switch on the base etc.
Fitting shall be as per sample
approved, and fixed with proper
workmanship and wiring.
Item- 24 Supply,fixing, testing & commissioning of LED night light/ foot
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
commissioning of LED night light/
foot light fitting of 4W/ modular
type of 3 module, robust driver with
wide voltage range 100-240 volts
and inbuilt protection, protected
from dust and insects, complete
with cover/ accessories etc., as per
model no.673036 / 675597 of
Legrand or similar or as per sample
approved. Fitting shall be fixed with
proper workmanship and wiring.
Supply, fixing, testing & commissioning of LED for use atop mirrors, with small-to-mid-sized vanity
cabinets, or over wash
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of LED for use atop
mirrors, with small-to-mid-sized
vanity cabinets, or over wash
basins. Effective heat dissipation
with extruded aluminum heat sink,
Robust driver with wide voltage
range 100-240 volts and inbuilt
protection, protected from dust and
insects, Waterproof moisture anti-
fog anti-corrosion anti-rust,
complete with cover/ other
accessories etc. Luminous efficacy
90 Lumen/ Watt. Metal frame in
chrome finish with glass/ acrylic
diffuser. Colour temperature:
between 2700K - 3500 Kelvin
(Warm White). Fitting shall be as
per sample approved, and shall be
fixed with proper workmanship and
Supply,fixing, testing & commissioning of indoor type LED luminaires 10W maximum, slim LED
batten, 2 ft long, System
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of indoor type LED
luminaires 10W maximum, slim LED
batten, 2 ft long, System efficacy
greater than or equal to 100 lm/W,
Luminaires must be capable of
delivering minimum 1000 lumens,
luminaires complete with all
accessories and other specifications
as per Annexure XVIII. (Minimum
Warrantee - 5 years)
Item- 27 Supply,fixing, testing & commissioning of indoor type LED
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of indoor type LED
luminaires 20W maximum, 4 ft long,
System efficacy greater than or
equal to 110 lm/W, Luminaires must
be capable of delivering minimum
2000 lumens, luminaires complete
with all accessories and other
specifications as per Annexure XVIII.
(Minimum Warrantee - 5 years)
Item- 28 Supply, fixing, testing & commissioning of LED 20W-30W, ceiling
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of LED 20W-30W,
ceiling /wall bracket /wall mounting
decorative light fitting, Effective
heat dissipation with extruded
aluminum heat sink, Robust driver
with wide voltage range 100-240
volts and inbuilt protection,
protected from dust and insects,
complete with cover/ other
accessories etc. Wattage may vary
as per site requirement. Luminous
efficacy 70 Lumen/ Watt min.
Fitting shall be as per sample
approved, and shall be fixed with
proper workmanship and wiring.
Supply,fixing, testing & commissioning of LED street light lumaires 60W maximum, whether proof
having IP 65/66 protection, System
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of LED street light
lumaires 60W maximum, whether
proof having IP 65/66 protection,
System efficacy greater than or
equal to 120 lm/W, Luminaires must
be capable of delivering minimum
7000 lumens, luminaries complete
with all accessories and other
specifications as per Annexure XVIII.
(Minimum Warrantee - 5 years)
Supply,fixing, testing & commissioning of LED street light lumaires 120W maximum, whether proof
having IP 65/66 protection
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of LED street light
lumaires 120W maximum, whether
proof having IP 65/66 protection,
System efficacy greater than or
equal to 120 lm/W, Luminaires must
be capable of delivering minimum
14000 lumens, luminaries complete
with all accessories and other
specifications as per Annexure XVIII.
(Minimum Warrantee - 5 years)
Item- 31 Provision of new fire extinguishers
S No. Item No Description of Item Unit Qty Rate Amount
1 31 Provision of new fire extinguishers, Numbers 10.00 1546.00 15460.00
6 KG DCP type, as per specifications
in Annexure XIX.
Item- 32 Provision of new fire extinguishers
S No. Item No Description of Item Unit Qty Rate Amount
1 32 Provision of new fire extinguishers, Numbers 10.00 2969.00 29690.00
4.5 KG CO2 type, as per
specifications in Annexure XX.
Supply, fixing, testing and commissioning of 125A, 4 pole electronic / microprocessor based MCCB,
with inbuilt earth fault
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
commissioning of 125A, 4 pole
electronic / microprocessor based
MCCB, with inbuilt earth fault
protection along with earth leakage
protection having shunt coil, earth
leakage relay 30mA -30A CBCT etc.,
in sheet steel enclosure, as per
specifications in Annexure XXI.
Supply, fixing, testing and commissioning of 250A, 4 pole electronic / microprocessor based MCCB,
with inbuilt earth fault
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of 250A, 4 pole
electronic / microprocessor based
MCCB, with inbuilt earth fault
protection along with earth leakage
protection having shunt coil, earth
leakage relay 30mA -30A CBCT etc.,
in sheet steel enclosure, as per
specifications in Annexure XXI.
Supply, fixing, testing and commissioning of 400A, 4 pole electronic / microprocessor based MCCB,
with inbuilt earth fault
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of 400A, 4 pole
electronic / microprocessor based
MCCB, with inbuilt earth fault
protection along with earth leakage
protection having shunt coil, earth
leakage relay 30mA -30A CBCT etc.,
in sheet steel enclosure, as per
specifications in Annexure XXI.
Item- 36 Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade,
S No. Item No Description of Item Unit Qty Rate Amount
sheathed, armoured 1.1 KV grade,
multi-stranded aluminum conductor
cable of size 50 sq.mm.x 4 core, as
per specifications in Annexure XXII.
Item- 37 Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade,
S No. Item No Description of Item Unit Qty Rate Amount
sheathed, armoured 1.1 KV grade,
multi-stranded aluminum conductor
cable of size 70 sq.mm.x 4 core, as
per specifications in Annexure XXII.
Item- 38 Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade,
S No. Item No Description of Item Unit Qty Rate Amount
sheathed, armoured 1.1 KV grade,
multi-stranded aluminum conductor
cable of size 120 sq.mm.x 4 core,
as per specifications in Annexure
Item- 39 Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade,
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
sheathed, armoured 1.1 KV grade,
multi-stranded aluminum conductor
cable of size 300 sq.mm.x 4 core,
as per specifications in Annexure
Item- 40 Supply, fixing, testing & commissioning of aluminium lugs of size
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of aluminium lugs of
size 50 sq.mm. for cable
termination, as per specifications in
Annexure XXIII.
Item- 41 Supply, fixing, testing & commissioning of aluminium lugs of size
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of aluminium lugs of
size 70 sq.mm. for cable
termination, as per specifications in
Annexure XXIII.
Item- 42 Supply, fixing, testing & commissioning of aluminium lugs of size
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of aluminium lugs of
size 120 sq.mm. for cable
termination, as per specifications in
Annexure XXIII.
Item- 43 Supply, fixing, testing & commissioning of aluminium lugs of size
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of aluminium lugs of
size 300 sq.mm. for cable
termination, as per specifications in
Annexure XXIII.
Item- 44 Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade,
S No. Item No Description of Item Unit Qty Rate Amount
sheathed, armoured 1.1 KV grade,
multi-stranded copper conductor
cable of size 10 mm² x 2 core, as
per specifications in Annexure XXII.
Item- 45 Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade,
S No. Item No Description of Item Unit Qty Rate Amount
sheathed, armoured 1.1 KV grade,
multi-stranded copper conductor
cable of size 10 mm² x 4 core, as
per specifications in Annexure XXII.
Item- 46 Supply, fixing, testing & commissioning of heavy duty copper lugs
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of heavy duty
copper lugs of size 10 sq.mm. for
cable termination, as per
specifications in Annexure XXIV.
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
Item- 47 Excavation of the cable trench in normal soil under rail/ road and
S No. Item No Description of Item Unit Qty Rate Amount
normal soil under rail/ road and
refilling back the excavated earth,
restoring /repairing of flooring after
lying of cable, as per specifications
in Annexure XXV.
Item- 48 Excavation of the cable trench in hard soil under rail/ road/rocky
S No. Item No Description of Item Unit Qty Rate Amount
hard soil under rail/ road/rocky soil /
platforms (stone/RCC/Rock) and
refilling back the excavated earth,
recasting of flooring after lying of
cable, as per specifications in
Item- 49 Supply of material & saddling to the cables with GI saddles
S No. Item No Description of Item Unit Qty Rate Amount
1 49 Supply of material & saddling to the Metre 135.00 46.00 6210.00
cables with GI saddles, as per
specifications in Annexure XXVII.
Item- 50 Supply of material and construction of 1m
S No. Item No Description of Item Unit Qty Rate Amount
1 50 Supply of material and construction Numbers 70.00 19718.00 1380260.00
of 1m x 1m x 1m manhole, as per
specifications in Annexure XXVIII.
Design, fabrication, transportation, supply & erection of 4 meter length hot dip galvanized iron
sheet street light octagonal pole
S No. Item No Description of Item Unit Qty Rate Amount
1 51 Design, fabrication, transportation, Numbers 17.00 11555.00 196435.00
supply & erection of 4 meter length
hot dip galvanized iron sheet street
light octagonal pole with foundation
type base plate & foundation bolts,
excluding foundation (Approximate
Dimensions for pole: Top Diameter
greater than or equal to 70 mm,
Bottom Diameter 130 mm, Section
Length- 5000 mm, Thickness-3 mm,
Foundation Type Base Plate
(200X200X12 mm), Foundation
Bolts (M16 X 600MM 4Nos).with two
arm brackets min. 1000 mm long,
suitable for LED street light fitting,
as per specifications in Annexure
Item- 52 Design, supply of material & casting of RCC foundation with 1:3:6
S No. Item No Description of Item Unit Qty Rate Amount
1 52 Design, supply of material & casting Numbers 17.00 2229.00 37893.00
of RCC foundation with 1:3:6
concrete suitable for 4 meter high
GI street light octagonal pole, as
per specifications in Annexure XXX.
Supply, installation, testing & commissioning of digital astronomical daily time switch as per
Legrand DX3/ AlphaRex3 or
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
commissioning of digital
astronomical daily time switch as
per Legrand DX3/ AlphaRex3 or
similar, with 25A 4NO contactor as
p e r Legrand cat. No. 4125 51 or
similar & 06 module cabinet IP65 as
per Legrand cat.No. 6019 96 or
similar, complete with internal
wiring & connections, fixing
arrangement, as per specifications
in Annexure XXXI.
Item- 54 Supply of material & providing earthing with 'B' class G I pipe 3M
S No. Item No Description of Item Unit Qty Rate Amount
earthing with 'B' class G I pipe 3M
long x 50mm dia, 3.2mm thick ISI
marked, with earthing chamber &
top cover, as per specifications in
Annexure XXXII.
Supply of material & installation of maintenance free earth electrode of length 3 meter, including
earth enhancement
S No. Item No Description of Item Unit Qty Rate Amount
1 55 Supply of material & installation of Numbers 8.00 11137.00 89096.00
maintenance free earth electrode of
length 3 meter, including earth
enhancement material for earthing
for each electrode & other
accessories as per Drg. No. SDO/
RDSO/ E&B/001 and RDSO Spec No.
RDSO/SPN/197 /2008, as per
Annexure XXXIII.
Item- 56 Supply, fixing, testing & commissioning of G.I. strip 25mm x 6mm
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of G.I. strip 25mm x
6mm for earthing, including cutting,
bending, welding, excavation etc.,
as per specifications in Annexure
Item- 57 Supply and fixing G.I. strip hot dip galvanized of size 50mm x 6mm
S No. Item No Description of Item Unit Qty Rate Amount
1 57 Supply and fixing G.I. strip hot dip Numbers 7.00 825.00 5775.00
galvanized of size 50mm x 6mm for
main earthing terminal MET with
total length including all bends etc.
minimum 2 ft.. Scope also includes
cutting, bending, welding,
excavation etc. Specifications in
Item- 58 Supply, laying, testing, fixing and commissioning of PVC insulated
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
commissioning of PVC insulated &
PVC sheathed, multi-stranded, 1.1
KV grade, copper conductor cable
of size 10 sq.mm. single core FRLS,
in flexible / rigid PVC conduit,
complete with clamping of the
cables, and lugs at each
connection, as per specifications in
Annexure XXXVI.
Item- 59 Supply, laying, testing, fixing and commissioning of PVC insulated
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of PVC insulated &
PVC sheathed, multi-stranded, 1.1
KV grade, copper conductor cable
of size 16 sq.mm. single core FRLS,
in flexible / rigid PVC conduit,
complete with clamping of the
cables, and lugs at each
connection, as per specifications in
Annexure XXXVI.
Item- 60 Supply, laying, testing, fixing and commissioning of PVC insulated
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of PVC insulated &
PVC sheathed, multi-stranded, 1.1
KV grade, copper conductor cable
of size 25 sq.mm. single core FRLS,
in flexible / rigid PVC conduit,
complete with clamping of the
cables, as per specifications in
Annexure XXXVI.
Item- 61 Supply & fixing of PVC casing & capping of size 50mm x 50mm with
S No. Item No Description of Item Unit Qty Rate Amount
capping of size 50mm x 50mm with
all accessories for covering of
cables/ wires etc., as per
specifications in Annexure XXXVII.
Item- 62 Supply of aluminum ladder of size 6 feet height (when open),
S No. Item No Description of Item Unit Qty Rate Amount
1 62 Supply of aluminum ladder of size 6 Numbers 2.00 11892.00 23784.00
feet height (when open), double
sided, made from aluminum section
of minimum size - 66 x 31 x 3.15
mm thickness, 5 steps of 1 ft. width
min., two way climbing, Top
platform min. size 10" x 14",
complete with anti-skid solid rubber
at bottom, as per specifications in
Annexure XXXVIII.
Item- 63 Supply of aluminum ladder of size 8 feet height (when open),
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
1 63 Supply of aluminum ladder of size 8 Numbers 2.00 14179.00 28358.00
feet height (when open), double
sided, made from aluminum section
of minimum size - 66 x 31 x 3.15
mm thickness, 7 steps of 1 ft. width
min., two way climbing, Top
platform min. size 10" x 14",
complete with anti-skid solid rubber
at bottom, as per specifications in
Annexure XXXIX.
Item- 64 Supply of hammer type drill machine, heavy duty, 230V, 50Hzs,
S No. Item No Description of Item Unit Qty Rate Amount
machine, heavy duty, 230V, 50Hzs,
complete with auxiliary handle,
accessory set, Accepted make -
Bosch GBH 220 SDS Plus
Professional Rotary Hammer or
similar of Stanley / Dewalt / Hitachi
Rotary Hammer Drill.
Item- 65 Supply of Digital Clamp Meter with folllowing specifications: 3 ½
S No. Item No Description of Item Unit Qty Rate Amount
1 65 Supply of Digital Clamp Meter with Numbers 5.00 3810.00 19050.00
folllowing specifications: 3 ½ digits,
LCD display, 2000 counts with
automatic sign & function, 5
functions, Battery check function,
Low battery indication, Overload
protection, Audible continuity,
Average Sensing, Over Range
Indication, Diode Test, AC Current-
0.01 Amp, AC Voltage- 0.1V -750V
DC Voltage- 1.0MV-1000V,
Resistance- 0.1 Ohms-2000K Ohms,
Power supply- Single standard 9V
Battery. Make- KUSUM-MECO KM
2700, FLUKE 362, RISHABH RISH
1000 AAC, MEGGER-DCM-310/EN,
MITRAVI-DT-4250.
Item- 66 Supply, erection, testing & commissioning of 150mm dia. (V6)
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of 150mm dia. (V6)
vertical / horizontal type as per site
requirment, energy efficient
multistage submersible pump set of
capapcity suitable to deliver water
at the rate of 1200 to 140 LPM to
the head of 16 to 60 Mtr., motor
power rating of 10 HP/7.5 KW
approx., 415V, 3ph, 50 Hz, etc.,
having water filled cooling, B class
insulation, IP 68 protection,
complete with all accessories, as
per specifications in Annexure XL.
Item- 67 Supply, fixing, testing & commissioning of fully automatic
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
commissioning of fully automatic
programmable digital control panel
for pumpsets of capacity 10 HP to
20HP, 3-phase, 440V AC with micro-
processor based technology, inbuilt
Single Phase Protection, Water
Level Guard, Dry Run Protection,
Reverse Phase Protection, Overload,
Under Voltage / Over Voltage
Protection, inbuilt star delta starter,
Digital Ammeter, LED screen etc in
mountable sheet steel encloser IP
54 protection, with lock & key
arrangement, complete with all
accessories, as per Annexure XLI.
Item- 68 Supply of energy efficient inverter type split air conditioner unit
S No. Item No Description of Item Unit Qty Rate Amount
1 68 Supply of energy efficient inverter Numbers 6.00 51433.00 308598.00
type split air conditioner unit of
capacity 1.5 TR, having min. ISEER
5.0, along with copper tubing of on
an average 3 mtr in length, as per
specifications in Annexure XLII.
Item- 69 Supply and fixing of refrigerant copper tubing with insulation of
S No. Item No Description of Item Unit Qty Rate Amount
copper tubing with insulation of
required size, copper pipe dia 3/8"
or 1/2" or 5/8", as per site
requirement, complete with
hardware fittings as per
specifications in Annexure XLIII.
Item- 70 Supply and fixing of refrigerant copper tubing with insulation of
S No. Item No Description of Item Unit Qty Rate Amount
copper tubing with insulation of
required size, copper pipe dia 1/4",
as per site requirement, complete
with hardware fittings as per
specifications in Annexure XLIII.
Item- 71 Supply and fixing of bracket type ready made M.S. stand for
S No. Item No Description of Item Unit Qty Rate Amount
1 71 Supply and fixing of bracket type Numbers 6.00 1598.00 9588.00
ready made M.S. stand for outdoor
units of split Air conditioners, as per
specifications in Annexure XLIV.
Item- 72 Installation, testing & commissioning of split AC units of capacity
S No. Item No Description of Item Unit Qty Rate Amount
commissioning of split AC units of
capacity 1.0TR/1.5 TR/2TR at the
nominated site, as per
specifications in Annexure XLV.
(split ac units will be supplied by
Item- 73 Supply, fixing, testing and commissioning of PVC insulated &
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
commissioning of PVC insulated &
sheathed copper cable flexible
multistrand of size 2.5mm², 4 core
for interconnection, as per
specifications in Annexure XLVI.
Item- 74 Supply and fixing of plumber grade CPVC pipe line of nominal
S No. Item No Description of Item Unit Qty Rate Amount
1 74 Supply and fixing of plumber grade Running 20.00 111.00 2220.00
CPVC pipe line of nominal bore size Metre
25 mm / 40 mm, as per site
requirement, with all accessories, to
drain out the condensate water - as
per Annexure XLVII.
Item- 75 Supply and fixing of flexible pipe to drain water. The drain pan
S No. Item No Description of Item Unit Qty Rate Amount
1 75 Supply and fixing of flexible pipe to Running 5.00 40.00 200.00
drain water. The drain pan shall be Metre
connected to rigid PVC pipe by
braided PVC flexible pipe with
appropriate adapters.
Item- 76 Supply, installation, testing and commissioning of refrigerator 180
S No. Item No Description of Item Unit Qty Rate Amount
1 76 Supply, installation, testing and Numbers 3.00 19395.00 58185.00
commissioning of refrigerator 180
liters capacity Frost Free double
door, Confirming to IS No. IS:15750
(2006) for Frost Free or latest, Built
in Voltage Stabilizer, BEE Star
Rating: 3 Star minimum, Eco
Friendly refrigerant, energy efficient
compressor, copper coil. Make:
Usha/ Voltas/ Hitachi/ Carrier/ LG/
Samsung/ Whirlpool/ IFB/ Godrej/
Supply, installation, testing and commissioning of silent Diesel Generator set of 125 KVA capacity
complete with diesel engine,
S No. Item No Description of Item Unit Qty Rate Amount
1 77 Supply, installation, testing and Numbers 1.00 1751252.00 1751252.00
commissioning of silent Diesel
Generator set of 125 KVA capacity
complete with diesel engine,
brushless alternator, auto mains
failure (AMF) control panel with
automatic load changeover panel,
power cables, DG set fitted in
acoustic enclosure and mounted on
a base plate and all other
accessories, on turn key basis, DG
set confirming to Central Pollution
Control Board's latest guidelines of
CPCB IV+ emission standards
effective from 01/07/2023 or latest
amended, with on-site maintenance
& breakdown support during
warrantee period of 02 years. Scope
of work and detailed specifications
as per Annexure XLVIII.
Item- 78 Supply of material and providing roof shed of size approx. L-6
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
1 78 Supply of material and providing Numbers 1.00 232981.00 232981.00
roof shed of size approx. L-6 Mtr.*
W-4 Mtr.* H-6.0 Mtr. for various
capacity DG sets, complete with 'I'
beam MS channel, MS angle for
purlin, GI square pipe for supporting
of sheets, Galvanized cold rolled
steel sheet and cement concrete for
foundation & steps, as per
specifications in Annexure XLIX.
Schedule Schedule F-ALL NS Item - (Electrical Lift Portion) - POWER PORTION LIFT WORK -
Provision of new lift in the available lift shaft of new building by supply, installation, testing and
commissioning of new fire cum
S No. Item No Description of Item Unit Qty Rate Amount
1 1 Provision of new lift in the available Numbers 1.00 3540775.00 3540775.00
lift shaft of new building by supply,
installation, testing and
commissioning of new fire cum
goods lift, Permanent Magnet
Synchronous gearless machine,
machine room less MRLS,
conferming to IS:14665 Part I, II &
III with latest amendments, as per
corresponding specifications in
Annexure L : i . Ty p e : Gearless,
Machine room less MRLS. ii.
Capacity: 1 0 2 0 k g iii. Speed: 1.5
M P S iv. Floors: 17, (G+16) v.
Controller: Microprocessor based
AC variable voltage and variable
frequency drive. vi. Power: 415V, 3
ph, 50Hz, 4 wire system. vii. Car:
Stainless steel 1.5mm scratch
resistant, Doors: Automatic power
operated. Dimensions as per IS:
14665. viii. Automatic rescue device
ARD complete with UPS & sealed
maintenance free batteries. ix.
Emergency rescue - electrical
operated system as well as manual
rescue device. x.2 Nos. wireless HD
IP WIFI CCTV camera inside cabin &
ground floor, and SMS alert system.
xi. Hand rail and voice
announcement system xii.
Physically challenged / handicapped
passenger user friendly. xiii.
Warrantee: 24 months with
comprehensive maintenance &
failure attendance.
Provision of new lift in the available lift shaft of new building by supply, installation, testing and
commissioning of new passenger
S No. Item No Description of Item Unit Qty Rate Amount
MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
1 2 Provision of new lift in the available Numbers 1.00 3191069.00 3191069.00
lift shaft of new building by supply,
installation, testing and
commissioning of new passenger
lift, Permanent Magnet
Synchronous gearless machine,
machine room less MRLS,
conferming to IS:14665 Part I, II &
III with latest amendments, as per
corresponding specifications in
Annexure L : i . Ty p e : Gearless,
Machine room less MRLS. ii.
Capacity: 680 kg / 10 Passengers.
iii. Speed: 1.5 MPS iv. Floors: 17,
Microprocessor based AC variable
voltage and variable frequency
drive. vi. Power: 415V, 3 ph, 50Hz,
4 wire system. vii. Car: Stainless
steel 1.5mm scratch resistant,
Doors: Automatic power operated.
Dimensions as per IS: 14665. viii.
Automatic rescue device ARD
complete with UPS & sealed
maintenance free batteries. ix.
Emergency rescue - electrical
operated system as well as manual
rescue device. x.2 Nos. wireless HD
IP WIFI CCTV camera inside cabin &
ground floor, and SMS alert system.
xi. Hand rail and voice
announcement system xii.
Physically challenged / handicapped
passenger user friendly. xiii.
Warrantee: 24 months with
comprehensive maintenance &
failure attendance.
Item Breakup - A-All DSR-23 Items (Civil portion)
design and pattern. Total 573037.50 Item- 14 Ch.no. 17-SANITARY INSTALLATIONS S No. Item No Description of Item Unit Qty Rate Amount 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush 17.1 pipe, with manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern Each 26 6767.4 175952.4 1 W.C. pan of size 580x440 mm with integral type foot rests Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and 17.10 stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 2 17.10.1.1 510x1040 mm bowl depth 250 mm Each 60 6945.6 416736 17.22A Providing and fixing CP Brass 32mm Each 175 1034.8 181090 size Bottle Trap of approved quality 3 & make and as per the direction of Engineer-in-charge. 17.22B Providing and fixing CP Brass Single Each 85 6940.75 589963.75 lever telephonic wall mixer of 4 quality and make as approved by Engineer in charge.(a) 15 mm nominal dia MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and fixing toilet paper 17.34 holder : 5 17.34.1 C.P. brass Each 86 803.7 69118.2 17.81 Providing and fixing floor mounted, Each 85 18212.9 1548096.5 white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with 6 dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Total 2980956.85 Item- 15 Ch.no.18 -WATER SUPPLY S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.4S PP-R PIPES Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R 18.4 plain & brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. ( Internal Exposed on walls ) 1 18.4.2 PN - 16 Pipe, 25mm OD (SDR-7.4) Metre 900 318.35 286515 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded 18.5 polypropylene random fittings and fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of E n g i n e e r- i n - C h a r g e . Concealed work, including cutting chases and making good the wall etc. 2 18.5.1 PN - 16 Pipe, 20mm OD (SDR-7.4) Metre 640 477.85 305824 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold 18.6 water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY 3 18.6.5 PN - 10 Pipe, 50 mm OD (SDR-11) Metre 500 450.95 225475 18.6A Providing and fixing PPR Unions 4 18.6A.1 PPR Union 20mm Each 150 315.5 47325 5 18.6A.2 PPR Union 25mm Each 135 334 45090 6 18.6A.5 PPR Union 50mm Each 115 782.1 89941.5 18.7S C.P.V.C. PIPES Providing and fixing G.I. pipes complete with G.I. fittings including 18.12 trenching and refilling etc. External work 7 18.12.5 40 mm dia nominal bore Metre 90 617.05 55534.5 8 18.12.6 50 mm dia nominal bore Metre 105 762.15 80025.75 18.15S BRASS FITTINGS Providing and fixing gun metal gate 18.17 valve with C.I. wheel of approved quality (screwed end) : 9 18.17.1 25 mm nominal bore Each 8 622.4 4979.2 10 18.17.1A 20 mm nominal bore Each 5 539.95 2699.75 11 18.17.4 50 mm nominal bore Each 5 1026.65 5133.25 C.I. SLUICE VALVES/ FIRE 18.31S HYDRANTS & FIXTURES 18.48 Providing and placing on terrace (at Per Litre 22500 11 247500 all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking 12 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.48A Providing and fixing rectangular Per Litre 60400 11 664400 high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by 13 Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support including fittings & fixtures for tank shall be paid separately. 18.54S PTMT FITTINGS Providing and fixing PTMT grating of 18.58 approved quality and colour. Rectangular type with openable 18.58.2 circular lid 18.58.2.1 150 mm nominal size square 100 Each 50 196.95 9847.5 14 mm diameter of the inner hinged round grating Total 2070290.45 Item- 16 Ch.no.19 -DRAINAGE S No. Item No Description of Item Unit Qty Rate Amount 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff 19.6 mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 1 19.6.4 300 mm dia. R.C.C. pipe Metre 550 994.3 546865 Supplying and fixing C.I. cover 19.18 without frame for manholes : MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY 19.18.1 455x610 mm rectangular C.I. cover Each 7 1358 9506 2 (light duty) the weight of the cover to be not less than 23 kg 19.18.2 500 mm diameter C.I. cover Each 7 3441.2 24088.4 3 (medium duty) the weight of the cover to be not less than 58 kg Total 580459.40 Item- 17 Ch.no.20 -PILE WORK S No. Item No Description of Item Unit Qty Rate Amount 20.0 PILE WORK 20.1S General Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M- 25 of specified diameter and length below pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of 20.2A appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by Crawler mounted, telescopic boom hydraulic pilling Rig all complete, including removal of excavated earth with all its lifts and leads(length of pile for payment shall be measured up to bottom of pile cap). 1 20.2A.1 600 mm dia piles Metre 4700 5386.25 25315375 Cyclic vertical load testing of pile in accordance with IS Code of practice 20.7 IS:2911 (part IV) by Kentledge method including preparation of pile head etc for. 20.7.2 Group of two or more piles 20.7.2.1 Upto 400 tonne Safe capacity of Per Test 2 40545.15 81090.3 2 group Total 25396465.30 Item- 18 Ch.no. 21-ALUMINIUM WORK S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK 21.1S General Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm Sqm 250 1505.25 376312.5 1 thickness (weight not less than 12.50 kg/sqm) MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY 21.18 Providing and fixing 12 mm thick Sqm 10 5325.9 53259 frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring 2 type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to paid separately) Total 429571.50 Item- 19 Ch.no.22 -WATER PROOFING S No. Item No Description of Item Unit Qty Rate Amount 22.0 WATER PROOFING 22.1S General MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer- in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to 22.7 required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. "All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 22.7.1 With average thickness of 120 mm Sqm 672.3 1684.6 1132556.58 1 and minimum thickness at khurra as 65 mm. Total 1132556.58 Item- 20 Ch.no. 25-STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL S No. Item No Description of Item Unit Qty Rate Amount STRUCTURAL GLAZING ALUMINIUM 25.0 COMPOSITE PANEL 25.1S General 25.2 Designing, fabricating, testing, Sqm 55 3510.5 193077.5 protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminium sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised /Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved 1 grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY fabricating and installation of a l u m i n i u m grid, installation of glazed units, T & P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural d e s i g n e r , dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in- Charge. Total 193077.50
Item Breakup - B-All USSOR-21 Items (Civil portion)
Ordinary Portland Cement 53 grade MT of approved brands/makes Total 250425.81
Item Breakup - C-All NS Items (Civil portion)
Square Supply and Fixing Brass Name plate Centimetre Total 7200.00 Providing, laying and fixing unplasticized polyvinyl chloride(UPVC) pipes for soil, and waste discharge system type 'B' (SWR system) of 'Prince' or similar make (as per IS 13592:1992), single Item- 2 socketed for underground drainage system, making joints air and water tight with 'T' Shaped etc. Rate are including rubber rings ,solvent cement all labour, material, lead, lift, transportation, taxes,& royalty etc .complete, Note- Excavation of earth will be paid under relevant item in DSR S No. Item No Description of Item Unit Qty Rate Amount
Running 160 mm dia Metre
Running 250mm dia Metre Total 472950.00 Item- 3 Three track coloured anodised sliding window S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
Supplying & fixing THREE TRACKED Sqm COLOUR ANODISED SLIDING WINDOW as per following description: - (a)The outer frame shall be of coloured anodised aluminium tube section of size 100mm x 37.5mm x 16 gauge of Jindal or similar make. (b) Three tracks channel for sliding of shutters (i.e., Track bottom at sill and track top for sides and top) shall be provided of colour anodised aluminium channels of size 100mm x 31.75 mm x 16 gauge. (c) The window shutters shall be of coloured anodised aluminium section of size 40mm x 18mm x 16 gauge with interlocking arrangements & concealed lock. 2 number of best quality bearings shall be provided in each shutter. (d) The glass panels of the shutter shall be of smoke glass 5mm thick provided with PVC liners on top, bottom & sides. All aluminium sections shall be colour anodised of approved colour and window shall be fixed to the masonry by drilling holes, wooden plugs and screws. Rate is inclusive all materials, labour, tools & plants, consumables etc. complete. Total 1084600.00 Item- 4 China mosaic S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
Providing waterproofing treatment Sqm with china mosaic on terrace slab as per under in addition to specification enclosed alongwith tender documents. Preparing the surface for water proofing treatment by scrapping &brushing the surface so as to remove all loose materials after removing old tarfelt bitumen fiber glass tissues etc. complete washing of the surface with water. Only dismantling of concrete if any will be paid separately under USSOR item. Providing cement concrete to proper slopes as directed by the Railway Engineer or his representative however cost of providing cement concrete will be paid separately under USSOR items. Applying one coat of polymer based waterproofing compound of approved quality like SBR/ similar mixed with cement (OPC). 1Kg. Of polymer based water proofing compound & 2Kg. Of cement (OPC) should cover an area of 2.80 sqm. Providing & laying broken china mosaic (broken pieces of china glazed tiles) of approved colour set 20 mm thick cement mortar 1:3 mixed with water proofing powder of approved quality to correct level & slope and joints finished by pouring cement slurry brooming them down. The tiles shall be closely packed such that china mosaic covers at least 90% slab area. The above treatment shall be provided on the parapets/ any other wall upto 30cm. Above the floor level and the junction between the wall & the parapet round off shape of arc or curve. Curing of flooring continuously for 10 days so as to render the surface hard. Cleaning the china mosaic tiles of all dust & strains. The rate shall also exclude cost of cement, which will be paid for separately but shall include disposal of debris released from this work. Total 169650.00 Item- 5 15 mm dia stop cock S No. Item No Description of Item Unit Qty Rate Amount
Providing and fixing Concealed type Each 15 mm dia stop cock of SEIKO/MARC make with all labour,tools and plants ,materials, leads ,lifts, taxes ,transport etc. complete. Total 338850.00 Item- 6 Pillar cock chromium plated S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
Providing and Fixing Pillar Cock Each chromium plated (mixer) for wash basin jacquar make code No- 167/Marc series NO. MOR-1100 or similar as approved by engineer in- charge with all contractor's material, labour, tools & plants etc. complete with all lead & lift. Total 1352980.00 Item- 7 wash basin table top admiral collection S No. Item No Description of Item Unit Qty Rate Amount
Supplying & fixing wash basin table Each top admiral collection of BELLCERAMIC or similar ofsize570mm x 425mm x 175mm, approved quality & colour with CP brass Waste coupling, PVC connection etc with complete fittings. The rate shall include cost of all materials, labour, tools & plants and with all lead, lift, transportation, taxes etc complete Total 223560.00 Item- 8 Adjustable aluminum louvers S No. Item No Description of Item Unit Qty Rate Amount
Supplying adjustable aluminium louvers of 100 mm blade with suitable handle and fixing 4 mm thick glass sheets in louvers blades of approved quality with five joints etc. complete( Payment will be made in sqm i.e. area of clear opening shall be measured correct to two places of decimal) Total 92190.00 Item- 9 5mm mirror design hatch line S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing 5mm mirror Sqm with design hatching line all round edge with aluminum anodised frame, powder quoted with copper colour or any other colour as directed by Rly. Engineer. Aluminum frame shall be 40mm thick with hardboard packing behind the mirror and provided with hanging arrangements. The quality of mirror shall be confirm to Modigaurd or similar Total 239085.00 Item- 10 Dry rubble filling S No. Item No Description of Item Unit Qty Rate Amount
Uncoursed RUBBLE FILLING (in work like rubble filling behind abutments etc.)without any special dressing of stones. Total 159200.00 Item- 11 8 mm to 15 mm roofit plaster S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
Providing and applying 8 to 15mm Sqm thick water resistance premixed/ready mixed roofit mix internal plaster of thick render's of Roofit Industries Ltd. or similar. The specifications of the premixed internal plaster shall be as under. 1.Colour- Gray 2. Binder- Ordinary Portland cement. 3.Fillet- Graded sand conforming to BS 1199. 4.Additives- Water soluble additives t o to improve workability, water retention, durability and adhesion strength. 5.Water Demand: For hand application: Approx14-16% or 7-8L/50Kg bag. 6.Max Aggregate- Size 2.60 mm 7.Pot lift- Approx. One hour. 8.Composition- 2.30Kg per sqm per mm thickness. 9.Particle consumption; Approx 23.0Kg/m2 /mm for thickness 10 mm. 10.Adhesion to concrete: > 0.75N/mm2 (1.0N/mm2) 11.Compressive strength:> 10 N/ mm2 12.Chloride content:<0.01% 13.Date of pack- Not/more than 6 months. NOTE: The ready mix plaster in bags shall be first supplied to the IOW in his godown & then drawn from his godown from time to time. The material should be got approved by the Contractor from the Railway Engineer before use on work. Transportation to site has to be done at contractor's cost and payment will be made for area of work done and not for any bags supplied. Total 5375000.00 Item- 12 20 mm to 25 mm thick roofit plaster S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
Providing and applying 20 to 25mm Sqm thick water resistance premixed/ready mixed plaster of thick render's of Roofit Industries Ltd. or similar. The specifications of the premixed plaster shall be as under. 1.Colour- Gray 2. Binder- 43 Grade portland cement. 3.Fillet- Graded sand conforming to BS 1199. 4.Additv- Water soluble polymers to improve work ability, water retention, durability and adhesion strength. 5.Composition- 43 grade Portland cement - 25-30% graded sand - 75-70% (including quartz and additives). 6.Max. aggregate- Size 4.5mm 7.Density- 1.80kg/Litre in dry and 1.90kg/litre in wet condition. 8.Pot lift- One hour. 9.Consumption- 1.7kg per sqm per mm thickness. 10.Water demand- About 15% of 6 litres per 40kg. 11.Date of pack- Not/more than 6 months. NOTE: The ready mix plaster in bags shall be first supplied to the SSE(W) in his godown & then drawn from his godown from time to time. The material should be got approved by the Contractor from the Railway Engineer before use on work. Transportation to site has to be done at contractor's cost and payment will be made for area of work done and not for any bags supplied. The rate is inclusive of scaffolding. Total 1271100.00 Item- 13 MS liner sheet 4 mm thick S No. Item No Description of Item Unit Qty Rate Amount
Supplying of MS Liners at site with MT M.S. sheets 6mm thick(Bottom 1.2 m liner to be 8 mm thick) confirming to IS specification. No payment shall be made for cutting, welding,wastage etc. Payment will be made for actual construction inthe work only. Testing of materials is to be done as per specifications Total 1426724.00 Item- 14 Labour rate for MS liners S No. Item No Description of Item Unit Qty Rate Amount
Labour rate for fabricating , and MT placing in position M.S. Liners with M.S. sheets 5mm thick (Bottom 1.2 m liner to be 8mmthick) including all operations such as straightening, Payment of Liner will be made from cut off level. No payment will be made for cutting, wastages & removal etc. cutting, bending to shape welding and placing in position and driving etc. complete including cost of all operations, labour, material etc. complete.MS Liner will be paid upto Cut off level. Total 535210.00 Item- 15 Brass aldrop 300 mm MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing brass oxidizsed Each standard Aldrop 300 mm long x 20 m m to existing door shutters with all fittings etc. The rate inclusive of all labour , material etc. complete. Total 483200.00 Item- 16 1 mm sunmica S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing special type 1 Sqm mm sunmica of approved quality, design & shape water &Termite resistant with the help of adhesive and edges will be chamfered before fixing on existing surface in different shape (ie round, oval ,or or as instructed by Railway engineer in charge ) as per sample of sunmica available with concerned SSE(Works)office. The payment will be made in rectangular shape. Outer to outer dimension of design will be taken for length and width of rectangle. The balance cutting material of Sunmica from rectangle other than designed shape will be deposited in SSE(W)office. The rate including all labour, materials & T&P etc complete. Frame work will be paid separately Total 2675750.00 Item- 17 wooden beading patti S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing designer Running wooden beading Patti size 1" to Metre 1,1/4" (Inch)width to existing frame. Sample shall be got approved by engineer in charge at site before bringing same to the site. The rate including all labours materials & T&P etc complete frame work will be paid separately Total 4950.00 Supplying and fixing counters/cupboards made of marine ply of kit ply gold or Gujran ply or similar conforming to IS 710 as per following description. The top shall be supported by vertical supports of marine ply and fixed to wall without any gap. Drawers for wooden knobs, locking arrangements and sliding arrangements consisting of PVC sliding rollers on aluminium angles shall be provided as per approved drawings. Shelves as per approved drawings below the working platform with horizontal Item- 18 and vertical dividers, shutters of marine ply with brass hinges, wooden knobs and locking arrangements with brass locks shall be provided. Cost of providing veneer, polishing and CT wood work involved will be paid separately. Payment will be made for actual area of marine ply and used in the work as per following items and no extra payment will be made for fittings, sliding arrangements etc. S No. Item No Description of Item Unit Qty Rate Amount
12 mm thick Total 2342760.00 Item- 19 Cuddappa stone slab 20 mm to 25 mm thick S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
Providing & fixing Stone-slabs/tiles Sqm (capable of taking good polish) laid over 12mm thick base of cement mortar 1:3 and jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing etc. complete. The rate includes all labour, material, T&P, Lead and lift, transportation, all taxes etc. c o m p l e t e . (a) Cudappa stone slabs/tiles of 20mm to 25mm in dado, skirting and other vertical surfaces Total 236460.00 Item- 20 Temporary fencing S No. Item No Description of Item Unit Qty Rate Amount
Providing fencing to enclose construction area Metre of 1.8 m high with mild steel angle frame, GI corrugated sheet as per approved drawings , including foundation. The rate includes one coat of red oxide primer before erection, two coats of approved paint & shade (include Western Railway logo) as per specification ,erection in position , welding/ bolting. The rate includes cost of material, labour, transportation, lead, lift, octroi etc. complete as direct by engineer. Total 133770.00 Item- 21 Spary hose chrome plated S No. Item No Description of Item Unit Qty Rate Amount
Providing and Fixing Spray hose Each chromium plated of jacquar make code No. 563 /Marc Serise No. MAC- 3050 or similar as approved by engineer in charge with all contractor's material, labour, tools & plants etc. complete with all lead & lift. Total 71060.00 Item- 22 Two way bib cock chromium plated S No. Item No Description of Item Unit Qty Rate Amount
Providing and Fixing Two way bib Each cock chromium plated (toilet bib) of jacquar make code No- 041/Marc Series No- MOR-1380 or similar as approved by engineer in charge with all contractor's material, labour, tools & plants etc. complete with all lead & lift. Total 118080.00 Item- 23 Towel rack chromium plated S No. Item No Description of Item Unit Qty Rate Amount
Providing and Fixing towel rack Sqm chromium plated of jacquar continental series No-1181/Marc Series No.- MOR-4090 or similar as approved by engineer in charge with all contractor's, material, labour, tools & plants etc . complete with all lead & lift. Total 198360.00 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Supplying and fixing GI clamp making U shape and size 30x30x3 mm flat with 6mm dia round bar threaded both end side screw, nut including removing and refixing the existing Dn. take pipe in Item- 24 original shape including cutting the wall and making good the same. The rate include all material, labour, leads, lifts, transportation etc. S No. Item No Description of Item Unit Qty Rate Amount
100 mm dia Total 58800.00 Item- 25 BMC approved cover S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing BMC approved Each cover of sintex or similar double nesting type hot press moulded GMC cover complete with outer GMC ring etc. complete including air and water tight with necessary fixing arrangement nuts, bolts, locking arrangementetc. Rate shall be including all labour, materials, tools and plants, transportation etc. complete. a ) Size 460 mm to 520 mm dia. Total 20754.00 Item- 26 TMC garbage resistance system S No. Item No Description of Item Unit Qty Rate Amount
"Supply & installation of TMC Sqm Garbage Resistance System with cover Fire Retardant, Acid proof, shock proof, Theft free, Height 25mm, center to center distance between two I section 80mm. Top Flange 15mm, Cross rod @ 150mm pitch, Load capacity 500 Kg/Sqm. UV stabilized Resin used. Make: ITR-LTG-25.80 The rate include all lead, lift, transportation of material and labour, working between crossing of track." Total 114864.00
Item Breakup - D-All NS Items -Fire safety related Items (Civil portion)
SSupplying and fixing 65mm dia Each single hydrant outlet landing valve in gun metal with C.I. hand wheel & tested to 21 Kg/cm2 pressure (Conforming to IS - 5290) with companion flanges, nuts, bolts, washers, gaskets, gun metal cap & chain, etc. complete as specified Total 365374.38 Item- 2 Supplying and fixing swinging type wall mounted fire hose reel S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing swinging type Each wall mounted fire hose reel to IS 884 with fire hose of braided rubber to IS 444 suitably reinforced Dunlop/Fire stone make 19 mm size and 30 M length, with 10 mm tapering branch nozzle in Brass male and female coupling with cut off valve attachment including fixing with approved anchor fasteners and bolts, complete as specified MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Total 405940.32 Item- 3 Supplying and fixing 2 lengths of 63 mm dia. canvas hose S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing 2 lengths of 63 Each mm dia. canvas hose each 15 m long as per IS 8423, 2 Nos. instantaneous couplings duly bound to the hose as per IS 903 and 1 No. 65mm dia. copper branch pipe with nozzle as per IS 903, complete as specified Total 337167.60 Item- 4 Supplying and fixing Fire Brigade 150mm size S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing Fire Brigade Set 150mm size breach inlet connection with four connecting points 65 mm size fixed over 150 mm dia G.I. pipe necessary companion flanges, nuts, bolts, gasket, washers, outlets, necessary bronze coupling connection etc. BS 215, as specified Total 7851.58 Item- 5 Providing and fixing Siamese in breaching assembly S No. Item No Description of Item Unit Qty Rate Amount
Providing and fixing Siamese in Set breaching assembly in brass with twin 63 mm breaching gun metal male inlets with non return valve, blank caps and drain valve, inlet boxes, gates and air release valves conforming to BS - 5041 Part 3 complete as specified Total 23554.74 Item- 6 Supplying and fixing weather proof courtyard fire hydrant MS hose cabinet S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing weather proof Each courtyard fire hydrant MS hose cabinet of about 750 mm x 600 mm x 250 mm size made of 3 mm MS plate capable of accomodating two lengths of 65 mm dia canvas hose of 15 m length with locking arrangement and lever for opening the door after breaking glass. Each hose box to be fitted with glass door in front, painted 'FIRE' in red luminous paint. Hinges should be sturdy to bear the weight of fully open door without sagging. Cabinet should be painted two coats of red enamel paint over a primer suitable for fixing to wall/floor with all necessary supports etc. complete as specified Total 90829.62 Item- 7 Pressure Gauge S No. Item No Description of Item Unit Qty Rate Amount
Providing and fixing pressure gauge Each Total 11028.00 Item- 8 Supplying and fixing wrought steel for MS fabricated air vessel S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
Supplying and fixing wrought steel Each for MS fabricated air vessel in pump room 300 mm dia. And 1200 high on MS stand with necessary arrangement and including the cut off, drain and air release and drain pipes to the channel in pump room. Total 3577.26 Item- 9 Fabricating and fixing MS air vessel (air cusion tank) S No. Item No Description of Item Unit Qty Rate Amount
Fabricating and fixing MS air vessel Set (air cusion tank) on top of each wet riser 300 mm dia and 1200 mm high with necessary cut off, air release valve to release water hammers and air locks as necessary, including two coats of enamel paint of approved colour over a primer coat after testing, complete as specified. Total 49188.87 Supplying and fixing GI 'C' class pipes, flanged / welded including necessary excavation in earth, soft rock or moorum, bailing or pumping out water from trenches with shoring wherever necessary, refilling the trenches, removing away the surplus earth or dumping it on site as directed (depth up Item- 10 to 1000 mm) including short lengths and specials are required, fixing concrete pedestals as per standard practice, wrapping with hessian cloth over a coat of bitumestic paint and testing to 13.5 Kg/Sq.cm complete as directed. S No. Item No Description of Item Unit Qty Rate Amount
Running 80 mm dia Metre
Running 100 mm dia Metre
Running 150 mm dia Metre Total 2160347.30 Item- 11 Supplying, installing, testing and commissioning Test cum drain valve assembly S No. Item No Description of Item Unit Qty Rate Amount
Supplying, installing, testing and Each commissioning Test cum drain valve assembly Total 242420.10 Item- 12 Supplying, installing, testing and commissioning Sprinkler Head 68deg. S No. Item No Description of Item Unit Qty Rate Amount
Supplying, installing, testing and Each commissioning Sprinkler Head 68deg. Total 3883.00 Item- 13 Providing coating of Bitumen Paint & 4 mm thick coal Tar Wrapping S No. Item No Description of Item Unit Qty Rate Amount
Providing coating of Bitumen Paint Running & 4 mm thick coal Tar Wrapping for Metre underground Ring Main of Fire Fighting System. Make -IWL/Star/or Equivalent Total 34159.80 Item- 14 Providing Hole in RCC slab by Core Cutting Method S No. Item No Description of Item Unit Qty Rate Amount
Providing Hole in RCC slab by Core Each Cutting Method, with contractor's all equipments, materials, labour, tools, etc. complete, including all taxes, as directed by Engineer in Charge. (a) 100 dia size Total 420970.00 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Item- 15 Supply and installation of MS fabricated Support for Piping Make: Tata/Zindal or Equivalent S No. Item No Description of Item Unit Qty Rate Amount
Supply and installation of MS Kg fabricated Support for Piping Make: Tata/Zindal or Equivalent Total 85173.00 Item- 16 Supplying, installing, testing and commissioning of hydraulically operated Sprinkler control valve, S No. Item No Description of Item Unit Qty Rate Amount
Supplying, installing, testing and Each commissioning of hydraulically operated Sprinkler control valve, with water motor gong bell, test trims,wet trim kit complete with stop valve, pressure gauges, drain valves, ball valves, check valves, strainers etc. confirming to latest IS Code complete. Alarm valve shall be UL Listed / FM approved.(shall be procured after due approval from EIC) Alarm Valve complete with water motor gong & trims 150mm. Total 1129022.00 Item- 17 Fire resistant door for stairwell size 1 200 x 2500mm complete with all accessories. S No. Item No Description of Item Unit Qty Rate Amount
Fire resistant door for stairwell size Each
accessories. Total 3039266.40 Item- 18 Supply and fixing of 20/25 mm MS fabricated air release valve S No. Item No Description of Item Unit Qty Rate Amount
Supply and fixing of 20/25 mm MS Each fabricated air release valve. Make: Zoloto/ Newage /Advance/Sant or Similar. Rate is inclusive all Materials, Labours, T&P, transportation, Lead& lifts, all taxes etc. complete Total 4732.48 Item- 19 Supplying & Fixing Hydrant valve orifice plate (SS) 100 mm S No. Item No Description of Item Unit Qty Rate Amount
Supply and fixing Hydrant Valve Each orifice plate ( SS) 100 mm. Total 72955.08 Item- 20 Providing & Fixing 4.5Kg Capacity Carbondioxide extinguisher S No. Item No Description of Item Unit Qty Rate Amount
Providing & Fixing of 4.5 KG. Each capacity Carbon dioxide (CO2) fire extinguisher ISI marked confirming to IS: 15683 with delivery hose horn, squeeze grip, release valve, locking arrangement, operation manual ,bracket with two screwed and sleeve complete etc.as required make life guard / G. Tech / Minimax. Rats are inclusive of all taxes, transportation, labour & material, fittings etc. Complete Total 183283.50 Item- 21 Providing & Fixing 6.0Kg ABC (Store Pressure Type) Fire Extinguisher S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
Providing & fixing of 6.00KgABC Each (store pressure type) fire extinguisher ISI marked confirming to IS: 15683:14609 IS:3589 ABC powder complete with squeeze grip, release valve, locking arrangement, pressure gauge operation manual brackets with two screwed and sleeve complete etc.as required make life guard / G. Tech /safe pro. Rats are inclusive of all taxes, transportation, labour & material, fittings etc. Complete. Total 22611.00 Item- 22 Supplying of GI/MS Fire bucket of 9ltr Capacity filled with fire resistant substance S No. Item No Description of Item Unit Qty Rate Amount
Supply of G.I./MS FIRE Bucket of 9 Each Liters capacity filled with fire resistance material i.e. sand. Rate is inclusive all Materials, Labours, T&P, transportation, Lead& lifts, all taxes etc. Complete Total 7440.40 Item- 23 Supplying & Intallation of MS fabricated floor mounted stand having provision of four buckets S No. Item No Description of Item Unit Qty Rate Amount
Supply and Installation of MS Each fabricated Floor mounting stand having provision of 4 Nos. fire buckets.(1.5m in height and 1.5m width) . Rate is inclusive all Materials, Labours, T&P, transportation, Lead& lifts, all taxes etc. Complete Total 22708.88 Item- 24 Supplying & Erection of gun metal branch pipe of 63 mm Dia fitted with 20mm dia S No. Item No Description of Item Unit Qty Rate Amount
Supply and ereaction gun metal Each branch pipe of 63mm dia. Fitted with 20 m dia. detachable Hexagonal Nozzle. ( make- Newage./HD Fire/AAAG or similar . Rate is inclusive all Materials, Labours, T&P, transportation, Lead& lifts, all taxes etc. Complete Total 145073.25 Item- 25 Providing & Fixing Butterfly wall of 200mm Dia PN 1.6 S No. Item No Description of Item Unit Qty Rate Amount
Providing and Fixing Butterfly valve Each 200 mm dia. P.N. 1.6 with Bronze/Gun Metal sheet duly ISI marked complete with bolt, nuts, gaskets, confirming to IS:13095 of following size as required. Make: Zaloto/Newage/Sant/advance or Similar. Rate is inclusive all Materials, Labours, T&P, transportation, Lead& lifts, all taxes etc. complete Total 57271.50 Item- 26 Providing, Installing & Testing of dual plate CI non return wall of 200mm Dia S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
Providing and installation, testing of Each duel plate C.I. Non return valve 200mm dia. Confirming to IS:5312 complete with neoprene gasket ,G.I. bolt, nuts ,washers etc. as per required. Make: Zaloto/Newage/Sant/advance or Similar Make Rate is inclusive all Materials, Labours, T&P, transportation, Lead& lifts, all taxes etc. complete Total 64424.08 Item- 27 Supplying & Fixing weather proof courtyard fire hydrant MS hose cabinet S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing weather proof Each courtyard fire hydrant MS hose cabinet of about 750 mm x 600 mm x 250 mm size made of 3 mm MS plate capable of accommodating two lengths of 65 mm dia canvas hose of 15 m length with locking arrangement and lever for opening the door after breaking glass. Each hose box to be fitted with glass door in front, painted 'FIRE' in red luminous paint. Hinges should be sturdy to bear the weight of fully open door without sagging. Cabinet should be painted two coats of red enamel paint over a primer suitable for fixing to wall/floor with all necessary supports etc. Total 37200.00 Item- 28 Extruded Alumnium Powder Coated Grill S No. Item No Description of Item Unit Qty Rate Amount
providing and fixing Extruded Sqm Aluminium Powder coated grill Total 558030.00 Item- 29 Supplying & Fixing fire resistant door for stair well 2400X2500 S No. Item No Description of Item Unit Qty Rate Amount
Supplying door for stair well size 2400x2500 mm complete all accessories Total 607853.28 Supplying, installing, testing and commissioning of G.I. Pipes confirming to IS 1239 Pt - I Heavy grade with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor fasteners, bolts nuts, clamps, "U" bolts, fittings such as Reducers,Tees, Item- 30 elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, The quoted rate shall also include for chasing / chipping walls, and making them good with filler material and finished in cement morter etc. complete. S No. Item No Description of Item Unit Qty Rate Amount
Running 25 mm Metre
Running 32 mm Metre
Running 40 mm Metre
Running 50 mm Metre
Running 65 mm Metre Total 1495674.95 Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 16) slim Item- 31 seal with required flanges, nuts, bolts etc. complete. S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY
150 mm Total 617070.54 Supplying, installing, testing and commissioning of C.I. Non-return valves (PN 16) swing check type Item- 32 with required flanges, nuts, bolts and gaskets etc. complete. S No. Item No Description of Item Unit Qty Rate Amount
150 mm Total 181893.30 Item- 33 2X1.5mm copper conductor armoured PVC cable ISI marked S No. Item No Description of Item Unit Qty Rate Amount
Flow switch cable-2x1.5 sqmm Running copper conductor armoured PVC Metre cable ISI Marked from each floor Total 84000.00 Item- 34 Junction box for 26 terminal S No. Item No Description of Item Unit Qty Rate Amount
Providing and fixing junction box for Each 26 terminal Total 5511.00 Item- 35 Priming Tank syntax make 500ltr capacity S No. Item No Description of Item Unit Qty Rate Amount
Providing and fixing priming tank Set syntex make 500 litre capacity Total 58028.00 Item- 36 Drain valve S No. Item No Description of Item Unit Qty Rate Amount
providing and fixing drain valve Total 9732.00 Item- 37 Supplying & Fixing hand held fire extinguisher 5kg capacity dry S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing hand held fire Each extinguisher 5 kg capacity dry Total 179100.00 Item- 38 Supplying & Fixing hand held fire extinguisher 5kg capacity CO2 S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing hand held fire Each extinguisher 5 kg capacity Co2 Total 121650.00 Item- 39 Supplying & Fixing ISI grade approved 9ltr capacity Galvanized round bottom fire buckett S No. Item No Description of Item Unit Qty Rate Amount
Supplying and fixing ISI grade Each approved 9 litre capacity Galvanised round bottom fire bucket Total 5544.00 Schedule E-All NS Item - (Electrical Power Portion) - POWER PORTION ELECTRICAL WIRING AND
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
DrawingDesigncondition.pdf
ATTACHMENT
BIMspecialconditions.pdf
ATTACHMENT
JPOforCompositeTenderofCivilElectricalworksforBuildingWorks2_1.pdf JPO for composite tender
ATTACHMENT
CivilSpecialTechnicalConditionScope.pdf
ATTACHMENT
ProcedureforpaymentofContractorbillasperGST.pdf
ATTACHMENT
1-Safetyrules.pdf
ATTACHMENT
2-guidelineforelectricalcondition.pdf
ATTACHMENT
3-JPOSTandElectfordiggingwork.pdf
ATTACHMENT
NOrelativecertificate.pdf
ATTACHMENT
Download all tender documents and submit your bid