Construction of Quality Control /Material Testing Laboratory for PWD (RandB) Division in District Kathua under M.H-5054

Amount

Labour to be engaged for clearance of site and removing of unhygenic mulba including disposal of the same before execution of work.

Earth work in excavation by manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, including dressing of sides & ramming of bottoms , incl. disposal or filling of excavated earth wherever required as per the directions of Engineer-in-charge .

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl. all leads, lifts & carriage of material by MT / H.L.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl. all leads, lifts & carriage of material by MT/ H.L.

Providing and laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg.12.5 mm nominal size) & curing complete incl. all leads, lifts & carriage of material by MT/ H.L.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) incl. all leads, lifts & carriage of material by MT/ H.L.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) incl. all leads, lifts & carriage of material by MT/ H.L.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Cold twisted bars incl. all leads, lifts & carriage of material by M.T. / H.L.

Centring and shuttering including strutting propping etc and removal of form work for

Foundations, footings, bases of columns etc. for mass concrete

Walls any thickness including attached pilaster buttresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platforms.

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Edges of slabs and breaks in floors and walls under 20 cms wide.

Providing and laying dry stone agg. using 40mm nominal size incl. spreading, levelling, watering, ramming, etc all complete including all leads, lifts & carriage of material by MT / H.L.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth including all shapes, leads, lifts and carriage of material by MT / H.L. in cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level (By manual means) incl. all leads, lifts & carriage of material by M.T. H.L.

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all leads, lifts and carriage of material by MT/H.L.

Extra for brick work in Square or rectangular pillars all leads, lifts and carriage of material by MT/H.L.

6 mm thick plaster to ceiling of mix 1 : 3 ( 1 cement : 3 fine sand) incl. all leads, lifts and carriage of material by M.T / H.L.

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand) incl. all leads, lifts & carriage of material by MT / H.L.

15mm cement plaster on rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) incl. all leads, lifts & carriage of material by MT / H.L.

Providing wood work in frames of Second class deodar wood in doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excl. panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Second class deodar wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing 35mm thick glazed shutters of Second class deodar wood for doors, windows and clerestory windows using 10 kg/ sqm (4 mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws.

Providing and fixing 35 mm thick Wire Gauze shutters using galvanised M.S. wire gauge of average width for aperture 1.4 mm in both direction with wire of dia. 0.63 mm for doors, windows & clerestory windows with hinges & necessary screws. ISI marked M.S. pressed bright finished butt hinges with necessary screws of req. size. Second Class deodar wood.

Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides & arrangements for inside & outside locking with push and pull operation complete, incl. the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover

Extra for providing mechanical device chain crank operation for operating rolling shutters.Exceeding 16.80 sqm in area

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Applying priming coat with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing aluminium tower bolts ISI marked(anodized anodic coating not less than grade AC 10 as per IS: 1868 transparent or dyed to required colour or shade with necessary screws etc.complete

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium sliding door bolts 250 x16 mm ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium hanging floor door stopper ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Twin rubber stopper

Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

P/F aluminum work for doors, windows, ventilators & partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns)

P/F aluminum work for doors, windows, ventilators & partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, Aluminum snap beading for glazing/panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)For shutters of doors, windows & ventilators incl. providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in- charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing ACP sheet panelling 4.0 mm thick in Partition/doors of approved quality as per the direction of Engineer- in - Charge (Complete job)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete incl.all leads, lifts & carriage of material by MT / H.L.Size of tile 600x600 mm (Double Charged)

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Ordinary cement without any pigment.

Painting top of roofs with bitumen of approved quality at 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm incl. cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of penetration 80/100

10 cm thick mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg/cum of earth and gobri leaping with mix 1 : 1 ( 1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 mixed with 2% of integral water proofing compound by weight of cement & finished neat with hand moulded F.P.S. brick tiles incl. all leads, lifts & carriage of material by MT/ H.L.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase incl. all leads, lifts & carriage of material by MT/ H.L.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete incl. all leads, lifts & carriage of material by MT/ H.L.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown complete.

Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. including all leads, lifts & carriage of material by MT / H.L.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes

75 mm diametre

110 mm diametre

Providing and fixing on wall face un-plasticized - PVC moulded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend

Providing and placing on terrace (at all floor levels ) polythylene Water Storage Tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for intlet, outlet and overflow pipes but without fitting and the base support for tank (Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license )

Providing & fixing G.I. pipes complete with G.I. fitting and clamps including cutting and making good the walls etc.Internal Work-Exposed on wall

15mm nominal bore Medium

20mm nominal bore Medium

25mm nominal bore Medium

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

15mm nominal bore

20mm nominal bore

Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc complete

15mm nominal bore Medium

20mm nominal bore Medium

25mm nominal bore Medium

Providing & fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting & making good the walls wherever required(Hindware/Cera/Parryware or eqivalvalent make) White Vitreous China wash basin 630 x450mm with a single 15mm C.P. brass pillar taps complete job.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Hindware/Cera/Parryware or eqivalvalent make)

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete semi rigid pipe 32 mm dia

Providing and fixing stainless steel soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing stainless steel shelf of app. Quality

Providing and fixing steel towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing & fixing 15mm nominal bore C.P. brass angle valve for basin mixer and gyser points of approved for conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (Jaquar, Cera, Hindware)

Providing and fixing 600 x 450 beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing stainless steel grating of app. Quality

Providing and fixing PVC floor trap of app. Quality

Providing and applying White Cement based Putty of average thickness 2 mm of approved brand & manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface .Water thinable Cement primer

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Supplying and laying including digging, carrying by lorry, filling River Bed Material including watering & consolidation in layers to specified lines, camber, grades and cross sections. Finished work incl. material , labour all leads , lifts and carriage of material by MT/HL.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete

Providing and fixing inauguration stone (granite of size 3/x 2/) including engraving , painting, writing and const. of pedestal of 5 feet height by way of brick work, plastering and painting incl. all leads , lifts and carriage of material by M .T./H.L.

M/S GARIB PERVER DUTT

M/S PARDEEP JAMWAL GOVT CONTRACTOR

TARSEM CHAND