SPECIAL REPAIRS TO CEILING AND FLOOR OF BLDG NO. T-146 AND SPL REPAIRS TO BLDG NO. P-210 AT KALIMPONG UNDER GE 867 EWS

Amount

S&F Mild steel sheet eaves, gutters galvanised with grade of zinc coating 275, half round with rounded edges thickness of sheet 1 mm & 125mm dia etc., including taking down existing gutter complete all as specified and directed by Engineer-in-Charge.

S&F Fe 410-W (Gde-E- 250) quality-A Rolled steel sections, joist, channel, angle, flat or Tee sections fixed independently with angle cleats or other connecting plates etc., including dismantling exing steel work complete all as specified and directed by Engineer-in-charge.

M&L for false ceiling with light weight PVC hollow section panels made of 1mm thick PVC sheet and overall thickness of panel minimum 7mm and 200mm wide strips fixed in and including GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including taking down existing ceiling boards of any type complete all as specified and as directed by Engineer-in-charge. MAKE: Rajshree plast wood/Sintex/Nandi or equivalent as approved by GE.

Dismantling timber scantling 40 Sqcm and over in section, in any position (framed work) complete all as specified and directed by Engineer-in-Charge.

Dismantling timber fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section, in any position complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including waterproofing compound @ 3% by weight of cement as per manufacturer's instructions including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for rendering 5 mm thick onconcrete surfaces in ceilins in cement mortar 1:4 finished fair and even complete all as specified and directed by Engr-in-charge.

Taking down shutters of any description area exceeding 1 Sqm but not exceeding 2 Sqm each easing & adjusting and refixing in same opening complete all as specified and as directed.

M&L preparing new plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer over thin layer of wall care putty (Birla white/Berger/Asian) complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL

M&L for complete removal of the existing treatment on walls by scraping and washing down with water including making good the surfaces, and applying two coats of distemper oil emulsion over one coat of primer over thin layer of wall care putty (Birla white/Berger/Asian) complete all as specified and as directed by Engineer-in-Charge. Make: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL

M&L for preparing new plastered surfaces of walls and applying two coats of premium Exterior emulsion paint over one coat of primer complete all as specified and directed by Engineer-in-Charge. Make: APPEX of ASIAN or equivalent in JENSON & NICHOLSON/ BERGER/ SHALIMAR

M&L for Complete removal of the existing treatment on walls by scraping and washing down with water including making good the surfaces and applying two coats of premium Exterior emulsion paint over one coat of primer complete all as specified and directed by Engineer-in-Charge. Make: APPEX of ASIAN or equivalent in JENSON & NICHOLSON/ BERGER/ SHALIMAR

M&L for preparation of new or previously un treated surfaces of steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L preparing old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. Make for item No. 14 to 16: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., and brushing neet cement slurry with 3.0 kg of cement per Sqm complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 or with approved chemical adhesive of not less than 3mm thick complete all as specified and directed by Engr-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar 1:4 backing coat complete all as specified and directed by Engr-in-charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for coloured glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar 1:4 backing coat including dismantling existing tiles and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. Make for Item No 18 to 21: NITCO/ SOMANY/ ASIAN / JOHNSON/ORIENT

M & L Plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in bed blocks for grouting hold fasts, coping, filling in pressed steel chowkats or similat work including necessary formwork, weathering, slightly rounded or chamfered andgles, finishing of exposed surfaces of concrete to fair and even complete all as specified and directed by Engineer-in-charge.

S&F 100 mm size cold rolled mild steel medium weight butt hinges including taking down existing hinge complete all as specified and directed.

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section including taking down existing tower bolt complete all as specified and directed.

S&F 150 mm long Aluminium alloy handles cast type anodised including taking down existing handle complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolts with hasp & staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy including taking down existing sliding door bolt complete all as specified and directed. Make for Item No. 23 to 26: - CROWN/ CLASSIC/ JYOTHI/ AMIT/ MOWJEE/ARGENT/Bharat/Alans/Hettich/Everlite or any ISI marked make as approved by GE.

Hacking out old broken glass and S & F 3mm thick sheet glass ordinary quality fixed with oil putty or beads and necessary clips/nut bolts area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. Make:- TRIVENI/ SAINT GOBAIN/ MODIGUARD/ATUL/ HINDUSTAN or equivalent as approved by GE.

S & F in repairs galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples or wooden beeds all as specified and directed. Make: -Kamal/Shalimar or equivalent as approved by GE.

M&L 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection, paths etc., laid in alternative bays finished even and smooth without using extra cement including demolition of existing concrete and removing rubbish off the premises complete all as directed by Engr-in-charge.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in surface channels, drains including fair finishing inner surface of drain or channel using extra cement, including forms, moulds, mitred/ stopped ends etc., including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socket in any length with rubber ring joints fixed to wall or laid in floors including taking down existing pipes complete all as directed by Engr-in-Charge.

S&F in repairs PVC (SWR) bends (any radius) suitable for 110mm bore pipe fitted with access door complete all as directed by Engr-in-charge. Make for item No 31&32: PRINCE/ SUDHAKAR/ NANDI/ FINOLEX/ SWASTIK/SUPRIME

S&F in repairs stainless steel curtain rods 25mm dia with fixing brackets complete all as directed by Engineer-in-Charge.

S&F 15mm bore GI water tubing medium grade with all fittings and fixed to wall, floor, ceiling complete including short lengths including taking down existing GI pipe all as specified and as directed by Engr-in-charge. Make: TATA/JINDAL/ZENITH

Cutting chases, plainning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, sillls, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good cutting not exc 10 cm girth in brick walls built in cement mortar complete all as directed by Engr-in-Charge.

S&F in repairs bib taps 15 mm bore, cast copper alloy chromium plated screwed down high pressure, with crown or capstan head, screwed for iron pipe all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K/ESSCO (DELUXE)

S&F in repairs Stop/angle valves 15 mm bore, cast copper alloy chromium plated screwed down high pressure, with crown or capstan head, concealed type with long shank ang cup screwed both ends for iron pipe or for unions all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K/ESSCO (DELUXE)

S&F Shower rose 125mm size with shower arm, cast copper alloy, chromium plated suitable tofix for 15mm dia iron pipe, fixed in repairs, all as specified and directed by Engr-in-Charge.

S&F in repair towel rail 600mm long between flanges 20mm dia brass chromium plated D type complete all as directed by Engr-in-Charge.

S&F Vitreous China wash basin, white, flat back, of size 550x400 mm, excluding taps, waste chain and plug and porcelain stopper but including brackets and 40mm dia brass chromium plated waste fitting and 40mm dia 90cm long PVC waste pipe, including taking down existing unserviceable/broken wash hand basin all as specified and directed by Engr-in-Charge. Make: HINDWARE / NEYCER/ PARRYWARE / CERA

S&F Pillar taps fancy type 15 mm bore, cast copper alloy, chromium plated with crown or capstan head screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, fixed in repairs, all as specified and directed by Engr-in-Charge. Make: SEIKO/RYBO/SPECTRUM/ NMC/L&K/ESSCO (DELUXE)

M&L in repairs PVC (SWR) floor/nahani trap 75mm dia plain with grating including jointing with solvent cement and making good disturbed portions of floor matching with adjoining surfaces complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated (Trepezium or tiled pattern etc.,) steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa (pitch of corrugation shall be 200mm to 250mm and crest shall be 28mm to 32mm) as in roof covering/ cladding to wall fixed with self tapping screws including taking down existing steel sheet complete all as specified and directed by Engineer-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws including taking down existing steel sheet complete all as specified and directed by Engineer-in-Charge. Make for Item No. 44&45: TATA BLUESLOPPE/ LLYODS /JMBS/ EVEREST INDUSTRIES LTD/CRIL or equivalent as approved by GE.

Taking down and refixing in same location or new location Rolled mild steel sections, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates etc., complete all as specified and directed by Engineer-in-charge.

M&L for preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed by Engineer-in-charge. Make: LOVELYCEM/ SURYACEM/ JANATHACEM / LUCKYCEM or equivalent make as approved by GE.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, laying of cable etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exceeding 10 sqm on plan and getting out in soft/loose soil all as specified and directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-charge.

Removing surplus excavated soil to a distance not exceeing 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

M&L for taking up or down existing 40 mm dia bore water tubing and connections and cleaning & re-laying with and including new ISI marked pipe fittings, in new or old position in trenches, floors, etc., or fixed to wall complete all as specified and as directed by Engineer-in-Charge. NOTE: Excavation and earth work shall be measured and paid separately.

All as per item No. 51 above but 25 mm dia bore.

All as per item No. 51 above but 20 mm dia bore.

S&F 40 mm dia bore medium grade galvanised iron tubing with all fittings and fixtures complete laid in trenches or on ground including taking up or down existing water tubing and connections complete all as specified and as directed by Engineer-in-Charge. NOTE: Excavation and earth work shall be measured and paid separately.

All as per item No. 54 above but 25 mm dia bore.

All as per item No. 54 above but 20 mm dia bore. Make for Item No. 54 to 56: TATA/ ZENITH / JINDAL

Supply and fixing Rotational moulded polyethylene water storage tank cylindrical vertical double layered, 1000 ltrs capacity with closed top hoisted and fixed in position all as specified in SSR Part I including taking down existing water tank complete all as specified and directed by Engineer-in-Charge. Make: SINTEX/ INFRA/ GP/ ROTEX/ ORIPLAST/ ASHISH/ POLYCON or equivalent ISI marked make as approved by GE.

S&F Symet ball valve 25 mm with high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed min weight for 25 mm 455 gms, including taking down existing unserviceable ball valve complete all as specified and directed by Engineer-in-Charge. Make:- PRAYAG/POLYTUFF or equivalent as approved by GE.

S&F gun-metal, globe or gate valves of with iron wheel head, screwed both ends for iron pipe of 40 mm dia bore and fixed including taking down existing unserviceable valve complete all as specified and directed by the Engineer-in-Charge.

All as per item No. 59 above but 25 mm dia bore.

All as per item No. 59 above but 20 mm dia bore. Make for Item No. 59 to 61:LEADER/NETA/ANCHOR/NMC/ DURGA/ZOLOTO or equivalent ISI marked make as approved by GE.

M & L Fe 290 Gde -E-165 mild steel angles or tees etc., as in staging of water tanks with web and flanges cut to shape, drilled and counter-sunk for screw, including bending and weilding angles as necessary , gusset plates, riveting etc, n exc 10 kg each brackets including taking down existing steel work complete all as specified and as directed by Engineer-in-Charge.

M&L for Plain cement concrete 1:3:6 mix type C2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.

Supply and spreading of dry river sand in trenches for cable protection and punned down complete all as directed by Engineer-in-Charge. Note:- Punned thickness only shall be measured for payment purpose.

Supply and laying unreinforced precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm laid in trenches for cable protection complete all as specified and directed by Engineer-in-charge.

Supply and laying in trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core and connecting with necessary lugs including taking up existing cable complete all as specified and directed by Engineer-in-Charge. Note:- Excavation, earth work, brick protection, protection pipe and sand coushioning shall be measured and paid separately. Make of cable shall be CCI / Gloster / ICC / Unistar / NICCO / Asian (RPG) / Havells / Polycab/PRG/Universal/Plaza/Crystal cables/Terracom/ Rallison/Mescab/Jeypore/KEI

Material and labour for 40 mm dia bore GI tubing Light grade, laid under roads/ floor, or fixed to wall or along the pole with suitable size M.S.flat iron clamps, nuts, bolts and washers for cable protection including taking down existing GI pipe complete all as specified and directed by Egineer-in-Charge. Make: TATA/ZENITH/JINDAL

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping of suitable size with all necessary fittings, fixed on walls/ceilings etc., including 1.5 Sq mm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface type for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover (Make: Hylem or equivalent ) for housing switches, socket outlet, regulator etc., for one light /fan point controlled by one switch/one bell / buzzer point controlled by one bell push/one 3 / 5 -pin switch socket outlet 5 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge.

All as per item No. 68 above but for One 3/5 pin switch socket outlet 5 amps on same board along with other switches complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 2.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping, medium grade of suitable size with all necessary fittings, fixed on walls/ceilings etc., including 2.5 Sqmm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes concealed type/surface type for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover (Make: Hylem or equivalent ) for housing switches, socket outlet, regulator etc., for one 5 / 6 -pin switch socket outlet 15 amps on independent board including taking down existing unserviceable point wiring including switches, sockets, regulators, ceiling roses, terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge. Make for Item No. 68 to 70 Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Casing&Caping: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

S&F switch piano, flush button, single pole, 5 amps, one way complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F lamp holder, PVC/Polycarbonate insulated body with back plate for batten fittings including 5 W retto fit B-22 LED lamp complete all as specified and as directed by Engineer-in-Charge.

S&F ceiling rose 3 terminal PVC/Polycarnonate, isolated body complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 71 to 75: (i) Anchor (ii) Plaza, (iii) Havells (Crabtree) (iv) ABB (v) Shalabh

S&F Energy efficient LED Tube light fitting, 4', 1x22 watt, with LED tube rod 22 Watt with bipin holders, connector block etc., complete with all accessories internally prewired and including connecting up with three core pvc sheathed flexible copper conductor cable of size 0.5 sqmm and 2 Nos PVC mounting blocks including taking down existing fitting complete all as specified and as directed by Engineer-in-Charge. Make: Philips Model TMC 501, TMC 501P 1xT-LED 22 W P3241 or equivalent in Crompton/Havells.

Supply, Fixing, Testing & Commsioning of IP66 & IK09 integral LED Bulk Head luminaire with housing made of Pressure Die Cast alumunium & Optical cover made of Opal Polycarbonate for glare free lighting . System Lumen Output of minimum 600 lumens. Power Consumption should not exceed 10W (Including Driver Loss). For Glare free lighting luminaire should be with Opal diffused Polycarbonate, Color temperature 6500 K, CRI >80, Housing - High pressure die cast aluminum, Mounting - Surface, THD < 20%, PF >0.9, Operating voltage range 120V-277V AC. Submission of LM80-08 for LED source & LM79-08 for Luminaire from third NABL Accredited Lab / UL mandatory including connecting up with 3.0 core, 0.5 sqmm copper conductor sheathed including taking down existing fitting and making good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. MAKE: Philips, Cat part No. "WT 202W LED 6S CW PSU S2 PC", or equivalent in Crompton /Havells

S&F Decorative, wall mounting luminarie, made up of Polycarbonate body suitable for 10 W LED lamp (B-2 base), ncluding taking down existing fitting complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No LHDL06160099 Model CITY - 3 of Havells or equivalent model of Philips/Bajaj / Crompton.

S&F sheet metal AC earth plug and socket of 3 pin with neutral with one No. MCB SP 20 Amps 240 Volts including taking down existing unserviceable fitting complete all as specified and as directed by Engineer-in-Charge.

S&F sheet metal enclosure DB TPN 4 way 415 V with 200 Amp rated bus bar, powder coated, double door including taking down existing DB with MCBs complete all as specified and as directed by Engineer-in-Charge.

S&F sheet metal enclosure DB SPN 8 way 240 V with 200 Amp rated bus bar, powder coated, double door including taking down existing DB with MCBs complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SPN 40 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SPN 32 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SP 6 to 32 Amps, 10 KA breaking capacity, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 79 to 84: Legrand/Siemens/Schindler

M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor and drawing through and including non metalic rigid PVC casing & caping of 25mm size fixed on wall/ceiling and connecting terminal ends including provision of 1 run of 6 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor as earth continuity conductor and connecting to earth dolly including taking down old unserviceable wiring and making good disturbed surfaces complete all as directed by Engr-in-charge. Note: 2 runs of 6 Sqmm and one run of 6 Sqmm and one run of Casing&Caping shall be measured as one unit length. Make Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Casing&Caping: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI medium grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1:3:6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, 15 mm GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I including taking out existing earth plate etc., complete all as specified and as directed by Engineer-in-Charge. NOTE: Rate quoted shall be deemed to include for earth lead and protection pipe upto 7.5m.

S&F LED security light suitable for 25 W LED with pressure di cast housing with epoxy power coated drak graphite grey colour finish , Prismatic ploycarbonate cover with individual LED lenses, IP65 including bracket made out of 25 mm dia light grade GI pipe not less than 1.2 mtr long bend to shape duly fixed with MS clamps of 3mm thick, nut, bolts etc complete fixed to wall complete including taking down existing fitting all as specified and as directed. Make: Cat Part No LSTS-25-CDL of Crompton or equivalent model of Havells/Bajaj/Philips/Wipro.

Supply and fixing recessed mounting LED 2x2 luminaries comprises of white powder coated CRCA housing with high power LED, aluminium frame with flat white high transmission clear acrylic cover including taking down existing fitting complete all as specified and as directed by Engineer-in-Charge. MAKE: Philips Model Full glow Cat Part No. RC380B LED 30S-6500 G4 L60 W60 PSU OD. or eqivalent in Crompton /Surya/Havells/Wipro/Bajaj.

Taking down water storage heater (Geyser) and keep in safe custody and refixing the same including necessary electric/water connection grouting of MS fastener of suitable size complete all as specified and as directed.

Taking down exhaust fan of any make & size and refixing in the same position after carrying out minor repirs complete all as specified and as directed.

Taking down tube light/wall fittings of any type, make & size and refixing in the same position after carrying out minor repirs complete all as specified and as directed.

Taking down existing point wiring of light/fan/socket and refixing after replacement of broken casing/caping complete all as specified and as directed.

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 93,581.00 B/F from Ser page No. 35 NOTE: Bidder shall insert credit amount as rate Rs. 93,581.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

G K SUTHAR

DEEP CHANDRA JOSHI

GEETA CONSTRUCTION

GARGO TRADERS

MS MAYA PRAKASH GOEL AND SONS

Sri Gupta Construction

SANJAY MITTAL