Up gradation of existing CCTV surveillance system at Vikas Sadan

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: DELHI DEVELOPMENT AUTHORITY

Name of work: Up-gradtion of existing CCTV survelliance system at Vikas sadan.

Contract No: 35/EE/ELD-11/DDA/2025-26

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Part A (SITC & DLP of three years i/c comprehensive maintenance and operation Note : (i) the rates of item no. 1 to 39 are inclusive of SITC, DLP period with operation and comprehensive maintenance of three years . (ii) provisional completion will be recoded after completion of SITC work and payment shell be realised as per prescribed payment terms and conditions. (iii) The agency will deploy three no. trained technician cum CCTV operator i.e., one no. in each shift of 8 hours. (iv) Final completion will be recoded after successfulcompletion work Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Dome Camera 5MP "Supply Installation Testing & Commissioning IP Dome camera with1/2.8” inch or better progressive CMOS, Effective pixels 2592 x 1944 (5 MP approx.) @ 25/30 fps or better, Varifocal motorized lens of range 4 to 10 mm or better, auto focus with remote zoom and IR cut filter, Minimum Illumination Sensitivity- Color-0.4 lx; Mono-0.05 lx; IR- ~ 0 lx, IR range 40 mtrs or more (IR LED's with effective distance upto 40 meter or better and 30 meter for colour view in night), Dynamic range- 130 dB or better, True day/night, Signal to noise ratio > 50 dB, Automatic Electronic Shutter (AES) with shutter speed range 1 sec -1/30000 sec or better, Dynamic noise reduction, Video compression H.265/H.264/OEM, White balance, Backlight Compensation, True Day/Night, Audio input/output- line level I/O, Triple streaming, SD card support up to 2 TB or more with overwrite settings, Auto back focus for fast installation, Password protection, IP address filter, HTTPS encryption, full end to end encryption with supported VMS or devices, Simple single cable installation with POE. Video analytics- AI based analytics- deep learning based object classification: person, vehicle, AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording Camera should have MTBF of > 60000 hr. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 2 TB. It should be supplied with 2 TB memory Card. Operating Condition- Temperature: -10°C to +60 °C or better, Humidity: ≤ 95% (non-condensing) or better Ratings- IP66, IP67 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC. and as per specification sheet attached complete as required" 10 Nos Excess(+) Full Conversion INR

2 Bullet Camera 5MP "Supply Installation Testing & Commissioning IP Dome camera with1/2.8” inch or better progressive CMOS, Effective pixels 2592 x 1944 (5 MP approx.) @ 25/30 fps or better, Varifocal motorized lens of range 4 to 10 mm or better, auto focus with remote zoom and IR cut filter, Minimum Illumination Sensitivity- Color-0.4 lx; Mono-0.05 lx; IR- ~ 0 lx, IR range 50 mtrs or more (IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night), Dynamic range- 130 dB or better, True day/night, Signal to noise ratio > 50 dB, Automatic Electronic Shutter (AES) with shutter speed range 1 sec -1/30000 sec or better, Dynamic noise reduction, Video compression H.265/H.264/OEM, White balance, Backlight Compensation, True Day/Night, Audio input/output- line level I/O, Triple streaming, SD card support up to 2 TB or more with overwrite settings, Auto back focus for fast installation, Password protection, IP address filter, HTTPS encryption, full end to end encryption with supported VMS or devices, Simple single cable installation with POE. Video analytics- AI based analytics- deep learning based object classification: person, vehicle, AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording Camera should have MTBF of > 60000 hr. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 2 TB. It should be supplied with 2 TB memory Card. Operating Condition- Temperature: -10°C to +60 °C or better, Humidity: ≤ 95% (non-condensing) or better Ratings- IP66, IP67 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC. and as per specification sheet attached complete as required" 20 Nos Excess(+) Full Conversion INR

3 Dome Camera 2MP Supply Installation Testing & Commissioning of Dome camera with 1/2.8” inch or better progressive CMOS sensor, Varifocal motorized lens of range 4 to 10 mm or better, auto focus with remote zoom and IR cut filter, Effective pixels 1920 x 1080 (approx. 2MP) or better @25/30 fps or better, Minimum Illumination Sensitivity –Color: 0.07 lx, Mono: 0.03 lx, & IR: ~0 lx, IR range 40 mtrs or more (IR LED's with effective distance upto 40 meter or better and 30 meter for colour view in night), Dynamic range- 120 dB, Signal to noise ratio > 50 dB, Automatic Electronic Shutter (AES) with shutter speed range 1 sec -1/30000 sec or better, Dynamic noise reduction, Video compression H.265/H.264/OEM, White balance, Backlight Compensation, True Day/Night, Audio input/output- line level I/O, triple streaming, SD card support up to 512 GB or more with overwrite settings, Auto back focus for fast installation, Password protection, IP address filter, HTTPS encryption, full end to end encryption with supported VMS or devices, Simple single cable installation with POE+. AI based analytics- deep learning based object classification: person, vehicle. AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with 512 GB memory Card. Camera should have MTBF of > 60000 hr. Operating Condition- Temperature: -10°C to +60 °C or better, Humidity: ≤ 95% (non-condensing) or better Ratings- IP66 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC. and as per specification sheet attached complete as required 75 Nos Excess(+) Full Conversion INR

4 Bullet Camers 2MP Supply Installation Testing & Commissioning of Bullet camera with 1/2.8” inch or better progressive CMOS sensor, Varifocal motorized lens of range 4 to 10 mm or better, auto focus with remote zoom and IR cut filter, Effective pixels 1920 x 1080 (approx. 2MP) or better @25/30 fps or better, Minimum Illumination Sensitivity –Color: 0.07 lx, Mono: 0.03 lx, & IR: ~0 lx, IR range 50 mtrs or more (IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night), Dynamic range- 120 dB, Signal to noise ratio > 50 dB, Automatic Electronic Shutter (AES) with shutter speed range 1 sec -1/30000 sec or better, Dynamic noise reduction, Video compression H.265/H.264/OEM, White balance, Backlight Compensation, True Day/Night, Audio input/output- line level I/O, triple streaming, SD card support up to 512 GB or more with overwrite settings, Auto back focus for fast installation, Password protection, IP address filter, HTTPS encryption, full end to end encryption with supported VMS or devices, Simple single cable installation with POE+. AI based analytics- deep learning based object classification: person, vehicle. AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with 512 GB memory Card. Camera should have MTBF of > 60000 hr. Operating Condition- Temperature: -10°C to +60 °C or better, Humidity: ≤ 95% (non-condensing) or better Ratings- IP66 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC. and as per specification sheet attached complete as required 141 Nos Excess(+) Full Conversion INR

5 ANPR Camera Supply Installation Testing & Commissioning of high resolution 5 Mp bullet camera with 1/2.8” inch or better progressive CMOS sensor, Effective pixels 2592 (H) x 1944 (V) (5MP approx.) or better @60fps, Varifocal motorized lens of range 5 to 40 mm or better, IR range- 50 m or more(IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night), Minimum Illumination Sensitivity-Color 0.007 lx, Mono 0.0008 lx & IR ~ 0 lx or better, Dynamic range≥130 dB, True Day/night, White balance, Automatic Electronic shutter, BLC, Privacy Masking, Dynamic noise reduction , Triple streaming, Audio input/output-line level I/O, SD card support up to 2TB with overwrite settings, Auto back focus for fast installation, Video Compression: H.265/H.264, Password protection, IP address filter, watermarking, HTTPS encryption, full end to end encryption with supported VMS or devices.Simple single cable installation with POE+. AI based analytics- deep learning based object classification: person, vehicle, AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 2 TB. It should be supplied with 2 TB memory Card. Operating Condition- Temperature: -10°C to +60°C or better, Humidity: Humidity: ≤ 95% (non-condensing) or better Ratings- IP66, IP67 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC. Display- It must display the details like image of vehicle, speed, time stamp and Display location of the violating vehicle. AND as per specification sheet attached complete as required 4 Nos Excess(+) Full Conversion INR

6 Multi Sensor Camera 12 MP Supply Installation Testing & Commissioning of 12MP IP Multi sensor camera with 4x 1/2.8” inch or better progressive scan CMOS sensor, Effective Pixel: 4 X 2048 (H) x 1536 (V) or more @ 30 fps or better, Varifocal motorized lens of 3.3- 5.7 mm or better, Motorized zoom and focus, Minimum Illumination Sensitivity- Color: 0.1 lx Mono: 0.01 lx & IR: 0 lx. WDR- 120 dB or better, IR range- 360⁰ upto 30 Mtrs or more, True Day/Night, Dynamic Noise Reduction, Audio input/output - line level I/O, SD card support up to 1TB with overwrite settings, auto back focus for fast installation, Video Compression: H.265/H.264, One IP address for all four imagers, Simple single cable installation, Password protection, HTTPS encryption, IP address filter, watermarking, HTTPS encryption, full end to end encryption with supported VMS or devices AI based analytics- deep learning based object classification: person, vehicle, AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 2 TB. It should be supplied with 2 TB memory Card. Operating Condition- Temperature: -10°C to +60°C or better, Humidity: Humidity: ≤ 95% (non-condensing) or better Ratings- IP66, IP67 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC and as per specification sheet attached complete as required 9 Nos Excess(+) Full Conversion INR

7 PTZ Camera 2 MP Supply Installation Testing & Commissioning of Outdoor IR HD PTZ Camera with 1/2.8" progressive scan CMOS, Effective pixels 1920 x 1080 or better @ 60 fps or better, Motorized varifocal lens with 30x Optical Zoom (4.3-4.5mm) to (129 -135 mm) or better; °, Min.- 16X Digital Zoom, Minimum Illumination Sensitivity- Color: 0.01 lux, Mono: 0.004 lux, with IR: 0 lux, WDR 120dB or better, Dynamic Noise Reduction, BLC, White Balance, Pan Range- 360° continuous, Tilt Range- 0° to 90°, Pan/Tilt Modes- Pan: 0.1°/s - 300°/s & Tilt: 0.1°/s - 200°/s with preposition accuracy of ±0.1°, Presets- 256 or more, Automatic Tours, IR distance 200 mtr. or better, IR either internal or external with full 360 deg PAN coverage; White Led illumination 60m or more; Memory card slot (support up to 2 TB or more), Audio input/output- line level I/O, Auto back focus for fast installation, Video Compression: H.265/ H.264, Password protection, HTTPS encryption, IP address filter, watermarking, HTTPS encryption, full end to end encryption with supported VMS or devices, Simple single cable installation with POE+. AI based analytics- deep learning based object classification: person, vehicle, AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 2 TB. It should be supplied with 2 TB memory Card. Operating Condition- Temperature: -10°C to +60 °C or better, Humidity: Humidity: ≤ 95% (non-condensing) or better Ratings- IP66, IP67 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC and as per specification sheet attached complete as required 4 Nos Excess(+) Full Conversion INR

8 Workstation Client Workstation a) Processor – Intel Core i7-10700K or equivalent CPU b) Memory – Minimum 32 GB c) Hard disks – 1 TB SSD Disk d) OS- Windows 11 Pro, 64bit e) Network Card – 1Gbit/s network card f) GPU - NVIDIA RTX A4000 9 Nos Excess(+) Full Conversion INR

9 Disply Supply, Installation, Testing & Comissioning of 43 inch 4K LED display, IPS / VA Panel Technology, Landscape & Orientation Resolution 3840X 2160 (16.9) UHD. Brightness 350 NIT, Built in Wi-Fi and Bluetooth inbuilt digital signage player, Android Built in Memory 16 GB, Processor Cortex A55x4 1.1 Ghz Processor Triple Core Mali 470 600 MHz 16 GB Memory24/7 operation, Brightness 350 nits, Contrast Ratio 1100:1, 178/178 Viewing Angle (orizontal: Vertical), 8ms Response Time (milli seconds) Built in speaker (10W+10W). Inputs DVI-D, Display Port, HDMI & Dual USB Plug & Play , RJ45 LAN, Output Stereo mini Jack, Remote Controlling of device, Display remotely controlled Internal/External, BIS Certificates etc. Complete as required 9 Nos Excess(+) Full Conversion INR

Core Switch SITC & fixing of L3 Core switch 20x100/1000 Base-X SFP ports,4x1000 RJ45/SFP 100FX/1G combo user ports* 4x1G SFP(+) uplink ports (*10G upgradeable), 2xSFP+ ports and 2x Stacking ports (Comprises 40 Gbps stacking Bandwidth). The proposed switch will have redundant Hot Swappable RPS from day-1. Switch Should support non-blocking wire speed. Should have Non-Blocking Architecture. The switch will have minimum 210 Gbps switching capacity. The switch should have minimum 125 Mpps forwarding rate. Each Switch should have Switch and Transceivers should be from the same OEM. Should have advanced routing with OSPF, ISIS, PIM and VRF for IPv4 and IPv6. Static Routing, RIP , from day 1,Should support ISSU from day 1 ,Should support stacking with min 4 members in a stack, Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 829,475 Hr. Preferred Make : CISCO/Juniper/Alcatel 2 Nos Excess(+) Full Conversion INR

11 Distribution Switch SITC & fixing of L3 Core switch 20x100/1000 Base-X SFP ports,4x1000 RJ45/SFP 100FX/1G combo user ports* 4x1G SFP(+) uplink ports (*10G upgradeable), 2xSFP+ ports and 2x Stacking ports (Comprises 40 Gbps stacking Bandwidth). The proposed switch will have redundant Hot Swappable RPS from day-1. Switch Should support non-blocking wire speed. Should have Non-Blocking Architecture. The switch will have minimum 210 Gbps switching capacity. The switch should have minimum 125 Mpps forwarding rate. Each Switch should have Switch and Transceivers should be from the same OEM. Should have advanced routing with OSPF, ISIS, PIM and VRF for IPv4 and IPv6. Static Routing, RIP , from day 1,Should support ISSU from day 1 ,Should support stacking with min 4 members in a stack, Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 829,475 Hr. Preferred Make : CISCO/Juniper/Alcatel 4 Nos Excess(+) Full Conversion INR

12 Access Switch SITC & Fixing of network switch with 24 PoE 1G BaseT, 2 1G* RJ45/SFP+ combo, 2 1G/10G SFP+ uplink/VFL ports. Internal AC PSU (380W budget). Switch should have switching capacity of 128Gbps and forwarding capacity of 68Mpps. MAC address : 16K minimum . Switch should have 1GB RAM, 1GB Flash and 1.5 MB packet buffer. Switch should have 64 IPv4, 4 IPv6 routes. Switch should be NDcPP certified. Preferred Make : CISCO/Juniper/Alcatel 24 Nos Excess(+) Full Conversion INR

13 Access Switch SITC & Fixing of network switch with 8 RJ-45 PoE 10/100/1G BaseT, 2 10/100/1G BaseT, 2 fixed SFP (1G) uplink ports, internal ACpower supply (120W PoE budget). Preferred Make : CISCO/Juniper/Alcatel 5 Nos Excess(+) Full Conversion INR

14 DAC Cable Supplying Installation testing and Commissioning of Direct Attach Copper (DAC) Cable 10G. Complete as required 6 Nos Excess(+) Full Conversion INR

15 SFP Module Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc. complete as required. a) 1G SFP Single Mode/Multi Mode 84 Nos Excess(+) Full Conversion INR

16 SFP Module Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc. complete as required. a) 10 G SFP + Single Mode/Multi Mode 16 Nos Excess(+) Full Conversion INR

17 Copper Module Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc. complete as required. a) 1G Copper SFP 20 Nos Excess(+) Full Conversion INR

18 NVMS- Software & Hardware SITC of Network Video Management Base Software expandable up to 500 cameras in Single Database server, Multi-server and multi-site solution, Virtual Matrix capability & unlimited user clients The NVMMS should support ONVIF Profile S, G, T & M , network joystick controller, GPU rendering support for H.264 and H.265 decoding , video on demand, Adaptive video throttling, rule engine, operator role management, server based Video Motion Detection (VMD), edge storage backfill support, bookmark with manual comment, bookmark based search, timeline search, Preview search, dual recording server instances without virtualisation, synchronous playback from all NSMs, Cybersecured with features such as Digital Signing, HTTPS & SSL base, smart web client, camera password management, support ANDROID & iOS phones. This should include the cost of hardware server with following specs: Supply, installation, testing & commissioning of server(s) with the following configuration - - Operating System (OS) , Software Patches , Firmware updates , Factory Configured Raid , Benchmarked and tested for the real workload of your projects. -VMS Software Integration with server that enables users to proactively monitor servers and predict hardware failures seamlessly. -The System should have 20 Operator Client Licences In-Built. The System should have following hardware: a) No of Processors: 1 b) 2nd or latest Generation Intel® Xeon® Scalable processors, up to 12 cores per processor c) 2.10 GHz processor or better d) RAM: Minimum 32 GB Memory DDR4 or better & expandable up to 128 GB e) HDD Capacity: • OS & Application: 2x 480GB SSD in RAID1 configuration • SQL Database & Transaction log: 4x 960 GB Mixed Use SSD RAID1 • Video Capacity: 5*12TB @RAID 5 ( The management server should also work as Failover Recording Server) f) Should be inclusive of Graphic card as per system requirement for supporting all the functions g) RAID (0/1/5/6) Controller. h) USB 3.0 Ports, USB 2.0 Ports and other ports as required to make system functioning i) Network Controller: Integrated Quad Port Gigabit Server Adapter j) Power Supply: Redundant hot plug Power supply. k) LED monitor 24’’ with keyboard, mouse and all required accessories l) Operating System: Microsoft Windows Server 2022 Standard m) Database - Microsoft SQL Server 2019 Standard or higher Licensed VersionWarranty 3-Year On-site, NBD, Keep Your Hard Drive Warranty. 1 Set Excess(+) Full Conversion INR

19 Camera Licence Supplying, Installation, Testing and commissioning of the IP Video Management License & Software should allow Live Viewing and Management solution of Network Video surveillance systems. The Video Management Software (VMS) shall be an open-platform, brand-agnostic solution supporting third-party ONVIF-compliant IP cameras. The VMS shall not impose any software-defined limitation on the number of cameras, subject to server hardware capacity.The VMS may be offered by a camera OEM, provided that the VMS supports third-party cameras without functional limitations, feature degradation, or differential licensing, a certification of same shall be submitted along with the bid, The VMS OEM shall be a full ONVIF member and the software shall comply with ONVIF Profiles S, G, T, and M. Valid ONVIF certification shall be submitted along with the bid. The VMS server application shall be OS-agnostic and capable of running on Windows and Linux operating systems. Licensing shall be bound only to the server/recorder MAC ID and not to individual camera devices. The VMS shall support secure encrypted video streaming using RTSPS/SRTP/RTSP over TLS between cameras, VMS servers, and client workstations, wherever supported by the cameras. OEM declaration for the same shall be submitted. Camera licenses with minimum three years of support shall be included. 334 Nos Excess(+) Full Conversion INR

ANPR Licence Supplying, Installation, Testing and Commissioning of Facial Recognition Software (FRS) based on Artificial Intelligence (AI) and Deep Learning platform capable of real-time identification and verification of persons from live and recorded video and image sources. The FRS OEM shall own and support the core facial recognition engine and shall be STQC certified and listed in NIST FRVT evaluations. The system shall support enrolment using images and video with multiple enrolments per person, recognition and enrolment from both image and video sources, configurable confidence thresholds, and comprehensive reporting including audit logs, MIS reports, and detection statistics. The FRS application shall support ONVIF camera auto-discovery and operate as an open, independent module not embedded in cameras or NVRs. The system shall comply with applicable data protection and privacy regulations. License with minimum 3 years support shall be provided. It should comply with attached specification sheet. 4 Nos Excess(+) Full Conversion INR

21 Face Recognition Licence Supplying, Installation, Testing and Commissioning of Facial Recognition Software (FRS) based on Artificial Intelligence (AI) and Deep Learning platform capable of real-time identification and verification of persons from live and recorded video and image sources. The FRS OEM shall own and support the core facial recognition engine and shall be STQC certified and listed in NIST FRVT evaluations. The system shall support enrolment using images and video with multiple enrolments per person, recognition and enrolment from both image and video sources, configurable confidence thresholds, and comprehensive reporting including audit logs, MIS reports, and detection statistics. The FRS application shall support ONVIF camera auto-discovery and operate as an open, independent module not embedded in cameras or NVRs. The system shall comply with applicable data protection and privacy regulations. License with minimum 3 years support shall be provided. It should comply with attached specification sheet. 5 Nos Excess(+) Full Conversion INR

22 Face Recognition Cum ANPR Server Supplying, Installation, Testing and commissioning of Face Recognotion Cum ANPR Server a) No of Processors: 1 b) 2nd or latest Generation Intel® Xeon® Scalable processors, up to 12 cores per processor c) 2.20 GHz processor or better d) RAM: Minimum 32 GB Memory DDR4 or better & expandable up to 128 GB e) HDD Capacity: • OS & Application: 2x 240GB SSD in RAID1 configuration • Video Disk: 5 x 12 TB Enterprise HDD, RAID 5 f) Should be inclusive of Graphic card as per system requirement for supporting all the functions g) RAID (0/1/5/6) Controller. h) USB 3.0 Ports, USB 2.0 Ports and other ports as required to make system functioning i) Network Controller: Integrated Quad Port Gigabit Server Adapter j) Power Supply: Redundant hot plug Power supply. k) LED monitor 24’’ with keyboard, mouse and all required accessories l) Operating System: Microsoft Windows Server 2022 Standard 1 Nos Excess(+) Full Conversion INR

23 Recording Server Supplying, Installation, Testing and commissioning of Face Recognotion Cum ANPR Server a) No of Processors: 1 b) 2nd or latest Generation Intel® Xeon® Scalable processors, up to 12 cores per processor c) 2.20 GHz processor or better d) RAM: Minimum 32 GB Memory DDR4 or better & expandable up to 128 GB e) HDD Capacity: • OS & Application: 2x 240GB SSD in RAID1 configuration • Video Disk: 5 x 12 TB Enterprise HDD, RAID 5 f) Should be inclusive of Graphic card as per system requirement for supporting all the functions g) RAID (0/1/5/6) Controller. h) USB 3.0 Ports, USB 2.0 Ports and other ports as required to make system functioning i) Network Controller: Integrated Quad Port Gigabit Server Adapter j) Power Supply: Redundant hot plug Power supply. k) LED monitor 24’’ with keyboard, mouse and all required accessories l) Operating System: Microsoft Windows Server 2022 Standard 3 Nos Excess(+) Full Conversion INR

24 UTP Jack Panel Supplying, Installation, Testing and commissioning of 24-Port 1U Unloaded Universal Modular Straight Patch Panel preloaded with cable support Bar (with slots to tie individual cable properly at the Support Bar (Shuttered IO not recommended, because when shutter gets malfunctioned then entire IO is of no use).24 ports patch panel should have ETL/UL verification program for compliance with ANSI/TIA-568.2-D. The Patch panel should be universal (stainless steel rear metal frame) and should be able to support both for UTP & STP Solutions as per the attached specs complete as required. 25 Nos Excess(+) Full Conversion INR

25 Patch Cord Supplying, Installation, Testing and commissioning of Cat6 Patch Cord 1 mtr. U/UTP Unshielded 24AWG Bare Copper, Stranded Flexible Conductor, HDPE Insulation, LSZH Jacket, ANSI/TIA 568.2D Category 6 Patch Cord, Support 1GBASE-T with Min. 250Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.0mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, PC UL94-V-0, Factory assembled with Transparent Premoulded Boots, Length 1 Meter, Blue Color as per the attached specs complete as required. 160 Nos Excess(+) Full Conversion INR

26 Patch Cord Supplying, Installation, Testing and commissioning of Cat6 Patch Cord 2 mtr U/UTP Unshielded 24AWG Bare Copper, Stranded Flexible Conductor, HDPE Insulation, LSZH Jacket, ANSI/TIA 568.2D Category 6 Patch Cord, Support 1GBASE-T with Min. 250Mhz Bandwidth, Operating Temperature -20 ℃ to + 60 ℃, Diameter <= 6.0mm Nominal, No Shield or Barrier Tape Inside, Min. 750 Plug Mating Cycles, PC UL94-V-0, Factory assembled with Transparent Premoulded Boots, Length 1 Meter, Blue Color as per the attached specs complete as required. 225 Nos Excess(+) Full Conversion INR

27 Patch Cord Supplying & Fixing of Single Mode Fiber Optic LC style fully loaded Patch Panel - 12 Core. 22 Nos Excess(+) Full Conversion INR

28 Patch Cord Supplying & Fixing of Single Mode Fiber Optic LC style fully loaded Patch Panel - 24 Core. 10 Nos Excess(+) Full Conversion INR

29 Patch Cable Supplying, Installation, Testing and commissioning of Fiber Patch Cord, LC Duplex - LC Duplex, 9/125μm OS2 Singlemode Duplex Zip Cord (<= 2.0mm), IL <= 0.35dB, RL>= 50dB, LSZH Jacket IEC 60332-1, Operating Temperature -40°C to +85°C, Meets ANSI/TIA 568.3-D, Length 3Meter, Cable : LC/LC or LC/SC or SC/SC, 9/125μm OS2 Singlemode Duplex Zip Cord (<= 2.0mm). OEM Name shall be mentioned on the patch cord cable as per the attached specs complete as required. 100 Nos Excess(+) Full Conversion INR

30 Optical Fiber Cable Supplying and drawing following core Fiber Optic Cable Armoured 6 Core Singlemode (OS2) 9/125 Fiber Cable, ISO 11801, ITU G.652.D, G.657A1, Telecordia GR-20-core, Outdoor ECCS Armored Fiber Cable with PBT Loose Tube Filled With Thixotropic Jelly, Uni-Tube, Glass Yarn, Water Swellable Tape Under Armor, UV-HDPE Jacket, Application : The fiber cable should have Bend insensitive features to be installed in Outdoor, Duct, Trenches & Underground application, Features : The fiber cable should have excellent features of Tensile, Crush, Water Prevention with Jelly & Moisture Barrier Tape as per the attached specs complete as required. 10000 Mtrs Excess(+) Full Conversion INR

31 Power Cable Supply and laying of 3 core 2.5 sq. mm., (48/0.2 mm) PVC insulated PVC sheathed, copper conductor power cable in new, conduit/ pipe on surface/ recess/ concealed including all accessories, termination, (Power to cameras from near by Power Points) 5000 Mtrs Excess(+) Full Conversion INR

32 Power Cable Supply and laying of 3 core 2.5 sq. mm., (48/0.2 mm) PVC Armoured insulated PVC sheathed, copper conductor power cable in new, conduit/ pipe on surface/ recess/ concealed including all accessories, termination, (Power to cameras from near by Power Points) 1500 Mtrs Excess(+) Full Conversion INR

33 Network Rack Supplying, Installation, Testing and commissioning of 15U Rack Wall Mount Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Racks should be made out of CRCA steel, and proceeded with CNC Punching, forming, welding and powder coated to meet Industrial requirements also.Conforms to DIN 41494 or equivalent standard and UL, RoHS as per the attached specs complete as required. 22 Nos Excess(+) Full Conversion INR

34 Network Rack Supplying, Installation, Testing and commissioning of 22 U Rack Floor Mount Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Racks should be made out of CRCA steel, and proceeded with CNC Punching, forming, welding and powder coated to meet Industrial requirements also.Conforms to DIN 41494 or equivalent standard and UL & RoHS as per the attached specs complete as required. 1 Nos Excess(+) Full Conversion INR

35 Network Rack Supplying, Installation, Testing and commissioning of 42U Rack Floor Mount Steel Racks shall be designed for Networking, Servers, Data Centre’s, Audio Video, Telecom and Lab applications.Racks should be made out of 1.6mm CRCA steel, and proceeded with CNC Punching, forming, welding and powder coated to meet Industrial requirements also.Conforms to DIN 41494 or equivalent standard and UL & RoHS as per the attached specs complete as required. 2 Nos Excess(+) Full Conversion INR

36 Pole Supply and installation of 4" dia GI Pole, (Class B) up to 5 Mtrs. height with accessories for mounting of camera as per specifications & approved make 10 Nos Excess(+) Full Conversion INR

37 KVM Switch Supply, Installation, Testing & Commissioning of 8 port KVM Switch with integrated 17" LCD/LED Monitor for connectivity with Servers in rack as per specifications and approved makes with change over switch. 2 Nos Excess(+) Full Conversion INR

38 CAT 6 Cable (DSR Item) Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2Supplying, drawing, Installation, Testing and commissioning of Cat 6, 23 AWG Bare Copper Solid Conductor U/UTP Unshielded LSZH, should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard Category 6, Flame Rating IEC 60332-1, Halogen Acid IEC 60754 -1, Smoke Density IEC 60134-2, ISO/IEC 11801–2nd Edition, 250 Mhz Bandwidth, ASTM D 4566, 5.8 mm Nominal Diameter, HDPE Insulation with Diameter 0.95 +/- 0.05mm, No Shield/Non Metallic Barrier Tape, Breaking Strength : >= 400N, Conductor Resistance <= 8.0 Ω /100m, Min. Elongation at Break of Insulation : 400%, Min. Jacket Tensile Strength >= 10 N/mm2 (Mpa), Dielectric Strength: DC 1500 V /Min., Euroclass Eca, Propagation Velocity : 69% (nominal), RoHS Complied as per the attached specs complete as required. a) 1 Run of cable-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required. (i) 1 Run of cable 16000 Mtrs Excess(+) Full Conversion INR

39 MS Conduit (DSR Item) Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm 3200 Mtrs Excess(+) Full Conversion INR

40 DWC PIPE Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (i) 63 mm dia (OD-63 mm & ID-51 mm nominal) 250 Mtrs Excess(+) Full Conversion INR

41 Comprehensive Maintenance and operation of all the equipment of CCTV surveillance system, i/c storage devices, switches, cameras, software, sip ports, patch panels, servers, network racks, KVM switches and all allied accessories installed after DLP period of 3 years , deploying three nos. of trained technician cum operators of CCTV system round the clock for day to day maintenance and operation i.e (6:00 AM to 2:00 PM , 2 PM to 10:00 PM, 10:00 PM to 6:00 AM) one no. in each shift complete etc. as required. Operation & Comprehensive maintenance 4th Year 12 Month Excess(+) Full Conversion INR

41.01 Operation & Comprehensive maintenance 5th Year 12 Month Excess(+) Full Conversion INR

42 Buy Back for existing CCTV System Dismantling and buy back of the existing CCTV system comprising of cameras, NVR etc. as per detailed inventory attached in the tender documents including removal, cartage, conveyance etc. complete as required as per the directions Engineer-in-Charge.(Note: (i)As the amount of this item is negative, it will be subtracted while calculating in the total amount of BOQ. (ii) The agency will obtain gate pass form the Engineer in charge prior to taking out this material from building premises.) 1 Job Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information