i) Laying of GI pipes for Community Water supply at various location under Police Colony Ward No2 ii)Itanagar RCC Culvert at SRPL colony near Dongda Tari Residence, iIi)RCC Drain near Police Dog Squad, SRPL colony, WardNo2iv)Drain Clearance near Dam

Amount

Laying of GI Pipes for Community Water Supply at various location under Police Colony, Ward No.02, Itanagar. Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work). (a) 15 mm nominal bor

d) 32 mm nominal boreas per drawing and technical specifications . b) Tar/TMT steel

f) 50 mm nominal bore

Providing and fixing brass full way valve with wheel of approved quality.(d) 32 mm nominal bore

f) 50 mm nominal bore

Providing and fixing brass stop cock of approved quality. (a) 15 mm nominal bore

d) 32 mm nominal bore

f) 50 mm nominal bore

Providing and fixing non-return valve of approved quality. (a) 15 mm nominal bor

d) 32 mm nominal bore

f) 50 mm nominal bore

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundationwithcrushedstoneaggregate40mm nominalsizemechanically mixed, placedinfoundationandcompactedbyvibrationincludingcuringfor 14 days.)

Centring and shuttering including strutting proping etc. and removal of form work for: (a) Footing in foundation

b) Walls including attached buttresses, pilasters etc

c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height)

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications (C) RCC Grade M20

Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation to floor two level including finishing and plastering the exposed surfaces with cement mortar 1:3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in : (a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size)

Supplying, fitting and placing un-coated Mild steel reinforcement complete in foundation as per drawing and technical specification (b) Tar/ TMT steel.

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing foce.Complete as per drawing and Technical specifications

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification.. A) Granular material

Providing and laying in foundations and plinth cement concrete 1 : 3 : 6 (1cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.

Centring and shuttering including strutting proping etc. and removal of form work for: (a) Foundation, footings, bases of columns etc. and mass concrete

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : (a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)

Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in :

Reinforcement of RCC work including bending, binding and placing in position complete

12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).

Neat cement punning

M/S K.B ASSOCIATES (BID ID -8008)