REPAIR/ MAINT TO LEAKAGE, SEEPAGE, JOINERY, PLUMBING AND OTHER B/R WORKS TO MD ACCN INSIDE FORT WILLIAM UNDER GE(FW) KOLKATA

Amount

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and n exceeding 4.00 Sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description area not exceeding 1.00 sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description area exceeding 2.00 sqm each and removing from the site complete all as specified and directed.

Supply and fixing 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick Factory made 2nd class hard wood glazed & skeleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as specified and directed.

Supply & fixing factory made 35 mm thick 2nd class hard wood panelled shutters (any Nos of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, fitted to chowkhats complete all as specified and directed.

S&F 30mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame,complete all as specified and directed.

S&F for 12mm thick vineered decorative plywood, grade I (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame,complete all as specified and directed.

S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, S&F in opening as per specification & drg as per manufacturer instructions.

S&F Factory made solid PVC door frame (chowkhat) of size 100 mm x 45mm made out of 5mm plain colour PVC sheet, frame reinforced with MS square tube of size 40mm x 20mm of 19 gauge throughout the frame, fixed in opening as per specification & drg as per manufacturer instructions complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with partical board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Butt Hinges medium weight cold rolled stainless steel 100mm long complete all as specified.

S&F aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

S&F Aluminum anodized sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F Aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as directed

S&F in repair 150 mm over all length of cover plate of floor door stopper of Brass body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 Sqm but n. exc 0.5 Sqm each complete all as specified and directed.

All as per item No.21 above, but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 Sqm each

S&F stainless steel wire cloth of 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth of 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L mild steel works as in bands and straps support or stays holdfast and similar articles made out of flat iron any size, including necessary welding or fixing nuts and bolts, complete all as specified and directed.

M&L in repair Expanded metal cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia weight n exc 4 Kg/Sqm or fixing with galvanised steel staples fixed to wooden of steel frame including rebating etc complete all as specified and directed.

M&L Mild steel framed work such as grills of ornamental type, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works incl portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc confirming to grade Fe-290. Gde-E-165 complete all as specified and directed.

M&L mild steel rolled sections as in main and cross beams, angle, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors etc conforming to grade Fe-410-0 or Fe-310-0 made to required shape and size, welded at joints complete all as specified and directed

Taking up/down plants or vegetation growth wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sqm cm superficial area and not exc one brick depth) using brick bats/aggregate and plastering in cement mortar (1:4) to distributed portion and applying two coat of cement base paint to match existing surface up to forth floor complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones., all as specified and as directed.

M&L for 4mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads, in square n. exec 0.5 Sqm in each pane, complete all as specified and as directed.

M&L for 4mm thick frosted sheet glass ordinary quality and glazing with oil putty or wooden beads, in square n. exec 0.5 Sqm in each pane, complete all as specified and as directed.

M&L for sheet glass 4.80mm thick ordinary quality in aluminium , steel or wooden frame and glazing with oil putty or wooden beads, in square exec 0.5 Sqm in each pane complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified.

Taking down/removing of existing water proofing treatment on roof surfaces and wall surfaces complete, including screed bed, racking out joints, hacking for key scrubbing down with water etc including dismantling of lightening strip and refixing the same in position, and removing rubbish out from MD land, all as directed. (Note :- Dismantling and refixing of the lightening strip is deemed to include in the rate quoted if any).

M&L for brushing neat cement slurry with 2.75 Kg of cement per Sqm on roof complete all as specified and directed.

M&L for cutting Grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type-B1 as required complete all as specified and directed.

M&L bituminous gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces, all as specified and directed.

M&L for Providing Cement Concrete, type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), as in roof padding mixed with water proofing compound and the concrete surfaces is to be finished even and fair (without using extra cement) complete all as directed by Engineer - in - charge . (NOTE: WPC Shall be measured & paid superlatively under respective item)

M&L 15 mm thick screed bed or bedding layer in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction, finished even and smooth without using extra cement, complete all as specified and directed. (NOTE: WPC Shall be measured & paid superlatively under respective item)

M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.20 litre per sqm over APP membrane.

Demolition of Brick work / stone masonry built in cement mortar and removing the debris from MD land complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for.

Demolition of cement concrete (reinforcement cut as required to facilitate demolition) roof,, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended works, complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.

M&L for brick work with fly ash brick straight or cuved on plan exc 6.0 mtr mean radius built in 1:6 cement mortar complete all as directed.

M&L for brick work with fly ash brick straight or cuved on plan to any radius in half bricks thick walls, built in 1:4 cement mortar complete all as directed.

M & L for 20 mm thick plastering in two layers, 10 mm + 10 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with water proofing compound (@ 200 ml per bag of cement or as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separately as "Supply only".

M&L 15 mm thick rendering in cement mortar (1:6) to brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick on ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement, with and including necessary scaffolding, complete all as specified and directed.

Supply only liquid water proofing compound all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sliding window with shutter styles 40 mm X 20 mm sheet thickness 1.5 mm with two shutters of glass and one shutter of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, window frame of size 100mm X 44mm X 1.5 mm thick section with our without rebate including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable peg stays, hinges and handles- 02Nos etc with 5.5 mm thick tinted/frosted glass ordinary quality as per manufacture's instruction complete all as specified and directed. (NOTE: Quoted rate shall be inclusive of stainless steel wire cloth and 5.5 mm thick tinted glass)

S&F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised decorative grills of size 100mm x 100mm having section width 6mm and 3mm thickness for aluminium windows, fixed on aluminium section weighing not less than 0.55 Kg/metre including all necessary jointing cleats, fixing clips complete all as specified and as directed.

S&F in repair in double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified incl taking down old floor spring complete all as specified and directed.

S&F in repairs aluminium (extruded section body) hydraulically door closer universal type designation No 3 suitable for door shutter of weight between 61 to 80 Kg fixed in repair including taking down old fitting complete all as specified and directed.

S&F in repairs mortice lock, vertical type 100mm dia size 6 levers complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials complete all as specified and directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/SQM on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

All as per Item No. 60 above, but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.

S&F in repair fibre glass reinforcement translucent corrugated sheeting of 2mm thick with two corrugation side lap fixed with fixed with L type or J type or cranked hook bolts in roofs, walls etc complete all as specified and directed.

M&L False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with supporting hangar consisting of 6 mm dia mild steel rod, J bolts with necessary bolts and washers and anodised adjuster and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)

S&F false ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on existing snap grid frame complete all as specified and as directed

Supply and Fixing PVC solid wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction and as directed by the Engineer-in-Charge.

Supply and Fixing 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

S&F in repairs Chromium plated 20mm dia chromium plated brass curtain rod with fixing brackets, stops, rollers etc of approved design complete all as specified and directed. (NOTE: Brackets will be measured and paid separately)

S&F in repairs fancy type metal finish curtain bracket for single/double rods fixed to walls complete all as specified and directed

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

M&L light shade vitrified ceramic tiles 10 mm thick, coloured, (square/rectangular) polished, size 600mmX 600mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match the shade of tiles, laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L light shade vitrified ceramic tiles 10 mm thick, coloured, (square/rectangular) polished, size 600mm X 600mm, as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured to match the shade of tiles over and including 10 mm thick backing layer in cement mortar 1:3 complete all as specified and directed.

M&L non skid ceramic 7 to 8 mm thick coloured tiles, joint free, (Square / rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment as in floor, laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L glazed coloured ceramic tiles in vertical surface 300 X 450 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M & L for heavy duty coloured ceramic floor tiles of size 300 x 300x 10 mm thick, suitable for high traffic external tiles, anti skid, scratch resistance and neutral to UV rays and acid alkali resistance as in floor including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (MAKE : JOHNSON, Model : ENDURA or equivalent model in other makes listed in the tender)

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for providing Plain Cement Concrete (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/Paving etc, finished even and smooth using extra cement complete all as specified and directed.

M & L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in floor , finished even and smooth without using extra cement complete all as specified and as directed

M & L for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs and the like including providing necessary form work etc, set in cement mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge. (Note : Reinforcement to be measured and paid separately).

M & L for RCC type B1 1:2:4 (nominal mix) ( 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for use and waste for form work to sides and soffits of floor or roof beams , beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams for rough finished surfaces of concrete flat complete all as specified and directed

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L for Preparation of new plastered surfaces of walls and applying three coats of white wash with brush complete all as specified and directed.

M&L for Preparation of new plastered surfaces and applying three coats of white wash with brush on ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement base paint over a coat of alkali resistant primer with brush, complete all as specified and as directed.

M&L for preparing newly plastered wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1.5mm thick water proof wall care putty complete all as directed. (Make of Waterproof Wall Putty : BERGER, Home shield or equivalent product in JK / BIRLA / ASIAN / NEROLAC)

M&L for preparing newly plastered ceiling surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1.5mm thick water proof wall care putty complete all as directed. (Make of Waterproof Wall Putty : BERGER, Home shield or equivalent product in JK / BIRLA / ASIAN / NEROLAC)

Material and Labour for applying one coat of white wash to old decorated surfaces of wall with brush, including preparation of surfaces (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent, salts, trading oil and greasy spots) complete all as specified and as directed.

Material and labour for applying one coat of white wash to old decorated surfaces of ceiling with brush, including preparation of surfaces (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent, salts, trading oil and greasy spots) complete all as specified and as directed.

M&L for applying one coat of cement based paint with brush on old decorated surfaces of walls, including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for applying one coat of acrylic distemper with roller on old decorated surfaces of walls including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for applying one coat of acrylic distemper with roller on old decorated surfaces of ceilings including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for preparation of old wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of Red oxide, zinc chrome primer to new steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by using high pressure jet washer including cleaning the surface by scrapping as required using emery paper, putty blade/scraper as applicable for removing loose paint, corrosion, algae formation etc., to make the surface clean and free from dust, for upto 4 storey height including necessary scaffolding, safety and protective measures complete all as specified and directed.

M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by scrapping and removing treated surfaces with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of 80 grit size having 7"- 9" dia (as required) including cleaning, watering to make the surface clean and free from dust, for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.

M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make, by using airless spray technology capable of operating single spray gun with hose pipe of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.

M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying 2mm thick wall care putty (in two layers) for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology of approved make, by using airless spray technology capable of operating single spray gun with hose pipe of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.

Note for item No 98 to 101:- The all process of painting will be carried out of Manufacturer authorised representative only, Jet Water machine and Graco Spry painting Machine shall be borne by the contractor and also the contractor should provide adequate jet and Spray machines as per site requirement as directed by Eng-in-Charge.

S&F in repair Cast iron work grade FG 150, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles (weight n exc 5 kg each) complete all as specified and directed.

M&L for PCC (1:2:4) type-B1 (using 20mm graded crushed stone aggregate) as in flooring benching to drain, coping etc. and the like edge slightly rounded or chamfered angles and throating, as directed including necessary form work etc complete all as specified and directed.

S&F in repairs chromium plated round grating 100mm dia complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete including taking down existing sink complete all as specified and directed. (MAKE : PRAYAG, Cat No. 1239-D or equivalent model in NIRALI/ DIAMOND/ ANJALI/ JAYNA/ BLUE STAR/ CERA/ PARRYWARE)

S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-702 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 )

S&F in repairs toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-706 / HINDWARE, Cat No: F880003)

S&F in repairs, Tubular towel rail (premium quality), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-701 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 )

S&F in repairs towel rack (premium quality) with lower hangar with hook incl taking down existing rack complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12)

S&F in repair chromium plated brass jet spray with one metre PVC tube complete all as specified and directed . (Make : Essco, Cat No ALE-547/PRAYAG, Cat No: BEA-17 / JAINKO, Cat No: JSJ-1 )

S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141)

S&F in repair coloured (any) PVC seat cover for EWC of any description with hinging device complete all as specified and directed.

S&F in repair Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge complete all as specified and directed. (Make : PARRYWARE, Cat No: E8300 or equivalent model in JAQUAR / CERA / HINDWARE)

S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232Y / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002)

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: TM-104 / CERA, Cat No: F2003201 / JAQUAR, Cat No: FLR-5053N / PARRYWARE, Cat No: G0607A1 / / PRAYAG, Cat No: 9316 / HINDWARE, Cat No: F280004)

S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: TM-103C-203 / CERA, Cat No: F2003163 / JAQUAR, Cat No: FLR-5041N/ PARRYWARE, Cat No: G0634A1 / PRAYAG, Cat No: 9312 / HINDWARE, CAT No: F280003SCP)

S&F in repair Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: TM-102 / CERA, Cat No: F2003151 / JAQUAR, Cat No: FLR-5047N/ PARRYWARE, Cat No: G0604A1 / / PRAYAG, Cat No: 9306 /HINDWARE, Cat No: F280002SCP)

S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : ESS ESS, Cat No: TM-332 & E221 / CERA, Model: F200351 & F4050102 /JAQUAR, Cat No: FLR-5083NK & ALD-083 / PARRYWARE, Cat No : G0651A1 & G5052A1 / / PRAYAG, Cat No: 9318 & CPS-15/ HINDWARE, Cat No: F280027 & F850096)

S&F in repair Chromium plated brass Wall mixer, concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : ESS ESS, Cat No: TM-126 /CERA, Cat No: F2003403 / Jaquar, Cat No : FLR-5281N / PARRYWARE, Cat No: G0617A1 / / PRAYAG, Cat No: 9380 / HINDWARE, Cat No: F280022) NOTE: Telephone shower shall be measured and paid separately.

S&F fancy type chromium plated telephonic hand shower, 3 flow with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed. (Make : Ess Ess, Cat No: HS 203 / CERA, Cat No: F7030103 / PARRYWARE, Cat No: T9983A1/ / PRAYAG, Cat No: BHS-92 / / HINDWARE, Cat No: F160053 or equivalent model in JAQUAR)

S&F in repair 15mm bore chromium plated central hole basin mixer (premium quality) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : ESS ESS, Cat No : C-211A / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 / HINDWARE, Model: CONTESSA PLUS)

S&F in repair Chromium plated brass Pillar tap, fancy type. with aerator, fixed to wash hand basin, complete all as specified and directed. (Make : Ess Ess, Cat No: C-201B / JAQUAR, Cat No: CON-021KN/ PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204/ HINDWARE, Cat No: F330002CP / Cera, Model: OCEAN)

S&F in repair chromium plated brass over head shower rose with arm (premium quality), with 3 flow, fixed to 15mm bore of iron pipe including taking down existing shower complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104S / HINDWARE, Cat No: F160051)

S&F in repairs 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : ACN-1131N / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-703 / PRAYAG, Cat No: BA-35 or equivalent model in CERA /HINDWARE)

S&F in repairs vitreous China (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)

S&F in repair 6mm thick bevelled edge mirror of size as required fixed on 6mm thick acrylic sheet board backing, fixed with chromium plated screws and cup washer complete all as specified and directed.

S&F in repairs Stainless steel kitchen rack of size 31" x 24" x 10" fixed in wall with screws and washer complete all as specified. (Make- Prayag , Model No- P-340 or equivalent model in SUYOG / BLUE STAR / ANUPAM INDUSTRIES)

S&F in repair corner glass shelf 300 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102/ ESS ESS, Cat No: AC-207A)

S&F in repair Chromium Plated glass shelf of size 460mm x130mm fixed to wall with Chromium Plated screws as in repair complete all as specified and as directed. (Make : Ess Ess, Cat No: AC-207 / JAQUAR, Cat No: AQN-7771 / PARRYWARE, Cat No: T6009A1 or equivalent model in PRAYAG / HINDWARE / CERA).

S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231 / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26)

S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )

Supply and Fix in repairs vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 or equivalent model in CERA)

S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Symphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )

Supply and fix in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)

All as per Item No. 135 here in before, but 600mm long. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON)

M&L for cutting chases for concealed water tubing, pinning in making good to facing where required and pointing in cement mortar (1:3) to ends or edges etc., brick walls, cutting girth n.exc. 10 Cm girth, complete all as directed.

Taking up or down GI Steel Water Tubing including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed for the following size of pipes :-

15mm bore outer dia

20mm bore outer dia

Supply, Laying and testing Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and directed for the following size of pipes :-

15mm bore outer dia

20mm bore outer dia

Supply, laying and testing of 3- layer PP-R Polypropylene random copolymer) pipes SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed by Engr-in-Charge for the following sizes:-.

15mm bore outer dia

20mm bore outer dia

Disconnecting exiting water storage Tank of capacity exceeding 250 litres but not exceeding 500 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writting MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.

All as per Item No. 141.00 but for PVC tanks of capacity exc 500 litres but not exc 1000 liters

All as per Item No. 141.00 but for PVC tanks of capacity exc 1000 litres but not exc 2000 liters

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches of 100mm internal dia complete all as specified and as directed

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches of 150mm internal dia complete all as specified and as directed

S&F 100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F 150 mm dia Cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F 100mm dia CI bends (any radius) complete all as specified and directed.

S&F 100mm dia CI bends (any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed.

S&F 100mm CI Tee equal size of any radious with eye, complete all as specified and directed.

S&F 100mm CI Tee equal size of any radious with ovel access doors, complete all as specified and directed.

JAGATMATA ENTERPRISE

dutta and dutta

DGR CONSTRUCTION

JOY-EN-JOY

ARMOUR UNIT

M/S SHRI P K ACHARJEE

RAJ ENTERPRISE

M/S S. K. SARKAR