Setup New Library with furniture almirah, AC etc in Community Centre SEctor-7 Ward No.9 MC Karnal.

Amount

Providing & fixing of semi glazed partitions solid upto 1200 ht & 8mm thick clear float glass to be fixed above. The solid portion of the partitions is made by Aluminium framework of 18 gauge of size 50mm x 38mm covered with 9mm thick plywood and finished with 1.0mm thick laminate of approved shade. Glass to be fixed with teak wood beading of size 19mmx 12mm finished with polish/paint and 3'' wide skirting is to be provided in 12mm thick plywood finished with laminate -According to N.S.item

Providing & fixing of full height solid partitions made by Aluminium framework of 20 gauge of size 50mm x 50mm fixed @600mm c/c both ways and covered with 9mm thick plywood and finished with 1.0mm thick laminate of approved shade. 75mm wide aluminium skirting is to be provided. Cost to include wooden inserts of sal-wood at the door opening for fixing the floor spring pivot etc. (The measurements will be taken from flooring to bottom of false ceilling) -According to N.S.item

Providing & fixing in place, study table/confrance of 25mm thick table top made of particle board incd. Modesty apron to be made out of 19mm thick commercial plywood/particle board. The table top to have post from edge, all the external surfaces to be finished with 1.0mm thick laminated and internal surfaces to be finished with 0.8mm thick laminate of approved shade. -According to N.S.item

Low height solid partition upto 1200mm height. The partition framework to be covered with 12mm thick plywood and finished with 1.0mm thick laminate. Wooden trim of size 75mm x 12mm made of rubber wood/steam beech wood to be provided at the edge of the partition finished with approved shade of melamine polish/paint and having 3'' wide skirting of 12mm thick plywood finished with laminate by way. -According to N.S.item

Door for CABIN:- Providing & fixing solid flush door of 38mm thickness in laminated finish on both sides with vision panel of size 300mm x 300mm made of 6mm thick glass for server, Teller, store and pantry. Door to be mounted on hinges and heavy duty door closer to be provided incd. Handles & necessary hardware fitting (Make:Ozone) .Cabin Door Size upto (1050mm x -According to N.S.item

Door Frames:- Providing & fixing incd. Necessary civil work door frames made out of salwood section of size 100mm x 75mm incd. Providing 3 no's anchor holds fasts, applying black jaipan paint on the surfaceof the frame touching the edge of the wall. -According to N.S.item

Branch Officer Table:- Providing & fixing in place, branch officer table of size 1425x 675mm (workti=op size) comprising of 25mm thick table top made of particle board with side credenza of size 400mm deep and 900mm long having sliding shutters with locks and a drawer pedestal of size 400mm x 500mm consisting of 2 no's drawer of 100mm deep and 300mm deep filling drawer having common lock. -According to N.S.item

Full height storage units:- Providing & fixing 450mm deep full height storage unit (2100 high) made of 19mm thick plywood and finished with 1.0mm thick laminate externally. Shutter made of 19mm thick plywood to be finished with 1.0mm thick laminate externally and hand polished internally. Intermediate shelves made of 19mm thick plywood to provided at every 400mm (as per size of box file/office file) and finished with hand polish. (Make: for all furniture Hardware should be from EBCO made) -According to N.S.item

Providing & fixing in place 600mm deep running counter made of particle board with post from edge profile for 25mm thick table top consisting of a drawerpedestal of size 450mm x 450mm x 500mm with key board, CPU trolley for every 1200mm of length and all the necessary hardwares. All the exposed surfaces to be finished with 1.0mm thick laminate. (Make: for all furniture Hardware should be from EBCO made) -According to N.S.item

Providing & fixing running counter with top made up of 19mm ply, fascia & brackets in 12mm thick ply & finished with 1mm thick laminate on top and hand polished underneath. According to N.S.item

Supply of chairs (app 1000/market value) as per department specification. -According to N.S.item

Supply of Officer chairs as per department specification. -According to N.S.item

Providing & applying desired paint texture finish to walls, of aproved shade. The surface of wall to be painted shall be prepared and applied with two coats of primer, two coats of putty and touch up putty if required to achieve smooth finish. -According to N.S.item

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (J.K./ Birla). -According to N.S.item

Providing and applying one coats primer & two coat metalic paint on doors, windows, skirtine & on grills etc. complete fall ceilling . -According to N.S.item

Gupsum board ceiling- 12.5mm thick single layer gypsum board fixed on suspended G.I. tubular channels as per manufactures specifications including jointing, finishing with gypsum compound, jointing tape and top coat. -According to N.S.item

Lay-in-Grid Modular false ceiling made of minerals fibre boards of average size of 600mmx600mx16mm having NRC 0.55 with aluminium powder coated framework of 24 mm wide tegular grid (Make armstrong/AUF) type-Fine fissured) -According to N.S.item

Supply of Sofa 2 Sitter at existing site. -According to N.S.item

Supply of News paper stand 3.5ft. Rack for library pupose 7-7 selves at existing site. -According to N.S.item

Supply of Magazine stand 3.5ft. Rack for library pupose 6-7 selves at existing site. -According to N.S.item

Supply of CD Racks Metal body, paint coated, weight 50-100Kg, dim 1385x2150x2120mm at existing site. -According to N.S.item

Supplying and fixing 4'' wide vertical fabric blinds of approved made and colour and texture incd. All fitting of approved quality complete blinds made using 100% polyster with acrylic polymer coating. -According to N.S.item

Supply of carpeting in Kids section etc., complete in all respect. -According to N.S.item

Supply of Projector at existing site. -According to N.S.item

Type-II panel-Main LT Panel (For 1000-1500 sft) This panel incd MCB's for AC hence seprate ACBD is not required metering:- Digital VAF meter to show voltage current and frequency parameters Phase Indication Lamps - 3 No's I/c 100A 25KA 4P MCCB:- 2 no's and 100A, 4P change over switch (MANUAL) ;- 1 no. O/g 63A TPN MCB:- 6 no's 32/40 A, DP MCB:- 5 No's 63A TPN MCCB :- 1 No's 40A TPN MCCB :- 1 No's 40 A DP ISOLATOR :- 1 No's 63A DPISOLATOR :- 1 No's 32A TPN MCCB :- 1 No's -According to N.S.item

125 Amps (25Ka) TPN MCB 1 no's Power DB -According to N.S.item

TPN 6 way (For 1000 to 1500 sft area) I/c:- 63 A TPN MCB O/g 3 no's 32A DP RCCB 100MA O/g 16/20 A SPMCB:- 18no's (6 no's per phase) -According to N.S.item

3½ Core 50 sqmm 1.1Kv Grade Aluminium Ar. Cable -According to N.S.item

CCTV 2 Core 1.0.sq.mm. FRLS,tinned copper,armoured cable. For camra power supply. -According to N.S.item

Primary Point:- One light pt. controlled by one 6 Amps switch (Point wiring including switches approx.10 Length) -According to N.S.item

Power point wiring:- 6 amps Light plug outlets:- Providing of 6 amps Modular type socket and switch(multicountry type), M.S/G.I BOX for housing the above,modular sheet, earthing the third pin with 1.00mm PVC Insulated Copper Conductor as a earth conductor complete in all respects as required. (Cost of wire /pipe/racewavs is not to be include in this cost) -According to N.S.item

Exhaust Fan Outlet Points:- Providing of 6 amps 3 pin socket near the exhaust fan and switch with the light switch board, G.I / M.S Box for housing the above, complete with earthing with 1.5 sq.mm. PVC insulated copper conductor/wire. -According to N.S.item

6/16 amps power plug outlets:- Providing of 16 amps modular type socket and switch(multicountry type),box of housing the above,modular sheet,earthing the third pin with 2.5sq.mm.mm PVC insulated Copper conductor wire,complete in all respects as required /cost of wire/pipe/racewavs is not to be include in this cost) -According to N.S.item

Split A/C outdoor Box :- Providing and fixing of 20 amps industrialsocket outlet with top controlled by 20 A 10 ka SP MCB all housed in M.S Box duly painted with ip 65,earthing the 3rd pin with 2.5 sq.mm PVC insulated copper conductor/wire. (excluding the cost of wire / cabeles) SPLIT AC 1.5 ton 3***(make llyod,carrier,mitsubishi etc.) -According to N.S.item

Split A/C outdoor Box :- Providing and fixing of 20 amps industrialsocket outlet with top controlled by 20 A 10 ka SP MCB all housed in M.S Box duly painted with ip 65,earthing the 3rd pin with 2.5 sq.mm PVC insulated copper conductor/wire. (excluding the cost of wire / cabeles) SPLIT AC 1.5 ton 3***(make llyod,carrier,mitsubishi etc.) -According to N.S.item

9 : POWER SOCKET & SWITCHS:- 3 nos. of 5/15 A power sockets controlled by 1 no. of 15 A switch (multicountry sockets) -According to N.S.item

9 : POWER SOCKET & SWITCHS:- 3 nos. of 5/15 Apower sockets without switch for CCTV power supply unit(multicountry sockets) -According to N.S.item

10 : SUBMAINS CIRCUIT WIRING:- Circuit Wiring (Light & Raw power points): Supply and laying of following sets of 2x2.5sq.mm.+ 1 x 1.5 sq.mm. PVC insulated , PVC sheathed copper flexible wirres in laid PVC conduits including civil work and required accessories spacers, clamps and hardware etc.(Cost of pipe /racewavs is not to be included) -2 x 2.5 Sqmm and 1 x 1.5 Sqmm (set of 8 Meter Wires According to N.S.item

10 : SUBMAINS CIRCUIT WIRING:- Circuit Wiring (Light & Raw power points): Supply and laying of following sets of 2x2.5sq.mm.+ 1 x 1.5 sq.mm. PVC insulated , PVC sheathed copper flexible wirres in laid PVC conduits including civil work and required accessories spacers, clamps and hardware etc.(Cost of pipe /racewavs is not to be included) -2 x 2.5 Sqmm and 1 x 1.5 Sqmm (set of 12 Meter Wires According to N.S.item

10 : SUBMAINS CIRCUIT WIRING:- Circuit Wiring (Light & Raw power points): Supply and laying of following sets of 2x2.5sq.mm.+ 1 x 1.5 sq.mm. PVC insulated , PVC sheathed copper flexible wirres in laid PVC conduits including civil work and required accessories spacers, clamps and hardware etc.(Cost of pipe /racewavs is not to be included) -2 x 2.5 Sqmm and 1 x 1.5 Sqmm (set of 18 Meter Wires According to N.S.item

AC Wiring : Supply and laying of following cables with fixid length mentioned cable should be PVC insulated , PVC sheathed copper flexible wires in laid PVC conduits including civil work and required accessories spacers, clamps and hardware etc. (Cost of pipe/ raceways is not to be included) 2 x 4 sqmm and 1 x 2.5 sqmm (set of 12 Meter Wires)-According to N.S.item

AC Wiring : Supply and laying of following cables with fixid length mentioned cable should be PVC insulated , PVC sheathed copper flexible wires in laid PVC conduits including civil work and required accessories spacers, clamps and hardware etc. (Cost of pipe/ raceways is not to be included) 2 x 4 sqmm and 1 x 2.5 sqmm (set of 18 Meter Wires)-According to N.S.item

Computer / RAW Power Point Wiring: Supply & insallation of 3 core 2.5 sq.mm. copper flexible PVC insulated sheathed wire 650V grade with ISI mark for connecting power point on work station in laid PVC conduits/ raceways. One circuit wire should contains 2-3 UPS / Raw power point as least. (white colour- UPS and black colour:-RAW).(Cost of pipe /raceway is not to be included) 3 Core 2.5 Sq.MM copper flexible cable set of 8 Mtr. length-According to N.S.item

Computer / RAW Power Point Wiring: Supply & insallation of 3 core 2.5 sq.mm. copper flexible PVC insulated sheathed wire 650V grade with ISI mark for connecting power point on work station in laid PVC conduits/ raceways. One circuit wire should contains 2-3 UPS / Raw power point as least. (white colour- UPS and black colour:-RAW).(Cost of pipe /raceway is not to be included) 3 Core 2.5 Sq.MM copper flexible cable set of 12 Mtr. length-According to N.S.item

Computer / RAW Power Point Wiring: Supply & insallation of 3 core 2.5 sq.mm. copper flexible PVC insulated sheathed wire 650V grade with ISI mark for connecting power point on work station in laid PVC conduits/ raceways. One circuit wire should contains 2-3 UPS / Raw power point as least. (white colour- UPS and black colour:-RAW).(Cost of pipe /raceway is not to be included) 3 Core 2.5 Sq.MM copper flexible cable set of 18 Mtr. length-According to N.S.item

Vaccum pump repair

11: LIGHT FITTING, EXHAUST FANS ETC.CFL Light Fittings,LED Light Fittings 600 x 600mm recess mounting LED Panel CRCA Poweder coated white housing slim aesthectic CRCA powder coated bottom frame special translucent high transmissivity, non yellowing polycarbonate diffuser, high efficienty leds, specialy designed constant current driver. Lumen output should be 3000 to 4000.Wattage should be inclusive of LED and Driver Lossses. 35W-40W (basic rateRs.2100/-including GSTAccording to NS Item.

Circulor mouned LED down lighter Highpower, high efficiency, chip-on-board LED module, high transitivity, non-yellowing PMMA diffuser, pressure die cast aluminium housing and special wave shaped radial heat sink, black powder coated for superior thermal performance, Aesthetic white rim molded in engineering plastic, Specially designed, easy to install mounting clips. Lumen output should be 1000 to 1300 for 16 - 18W, 700 - 1000 for 10-12W and 600 to 700 for 6-8W. Wattage should be inclusive of LED driver losses Colour tempreature 5000-6000K 6W-8W (Basic Rate-Rs.488/- including GST ))(According to NS Item)

Circulor mouned LED down lighter Highpower, high efficiency, chip-on-board LED module, high transitivity, non-yellowing PMMA diffuser, pressure die cast aluminium housing and special wave shaped radial heat sink, black powder coated for superior thermal performance, Aesthetic white rim molded in engineering plastic, Specially designed, easy to install mounting clips. Lumen output should be 1000 to 1300 for 16 - 18W, 700 - 1000 for 10-12W and 600 to 700 for 6-8W. Wattage should be inclusive of LED driver losses Colour tempreature 5000-6000K Supply and installation of 225 mm single phase exhaust fans with mounting frame and safety grills etc complete make Usha, Crompton, Bajaj, Khaitan)(According to NS Item)

Circulor mouned LED down lighter Highpower, high efficiency, chip-on-board LED module, high transitivity, non-yellowing PMMA diffuser, pressure die cast aluminium housing and special wave shaped radial heat sink, black powder coated for superior thermal performance, Aesthetic white rim molded in engineering plastic, Specially designed, easy to install mounting clips. Lumen output should be 1000 to 1300 for 16 - 18W, 700 - 1000 for 10-12W and 600 to 700 for 6-8W. Wattage should be inclusive of LED driver losses Colour tempreature 5000-6000K Supply and installation of pedestal 400 mm sweep oscillating type with all fixing accessorites bladesl etc complete make Usha, Crompton, Bajaj, Khaitan According to NS Item

PART '11' TOTAL CARRIED TO SUMMARY:-

12 : RACEWAYS , CONDUITS , CASSING-CAPPING:-Supply and installation of floor juncation boxes fabricated out of GI/MS Sheet Powder Coated of the sizes as required complete with 3 mm thick SS Sheet Cover as required 200 x 200 MM

Supply & installation of floor junction Boxes fabricated out of GI / M.S Sheet (Powder coated ) of the following sizes as required complete with 3mm Thick SS Sheet Cover as required. Supply and installaion of tollaly concealed underfloor rigid PVC Pipes of MMS Gauge of 25 MM -According to N.S.item

PART '12' TOTAL CARRIED TO SUMMARY:- Flooring:- Vitrified Tile Flooring:- Proving and Laying 600mm x 600mm Vitrified floor tiles of somany (1st quality) over a 75 mm thick cement mortar bedding (1:4) as per the design. The joints shall be kept as thin as possible should not exceeding 1 mm.(Basic cost of tile Rs.45/- Sq.ft -According to N.S.item

PART '12' TOTAL CARRIED TO SUMMARY:- Flooring:- Vitrified Tile Flooring:- Proving and Laying 600mm x 600mm Vitrified floor tiles of somany (1st quality) over a 75 mm thick cement mortar bedding (1:4) as per the design. The joints shall be kept as thin as possible should not exceeding 1 mm.Similar to above but for providing and fixing 75mm high skirting borderAccording to N.S.item

The Vaibhav Luxmi Coop. L&C Society Ltd. Karnal