SPL REPAIR TO BLDG NO P-5 OR MESS AT 2T WE DET IN BAKROTA TOP AT DALHOUSIE

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

All as per item 1 but frames exc 1.50 sqm but n. exc 4.0 sqm

Taking down shutters only exc 1.00 sqm but n exc 2.00 sqm each complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and directed.

M&L for PCC 1:3:6 type C0 using 12.5mm graded aggreegate as in back filling of chowkhats etc as mass concrete complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm girth and applying two coats of synthetc enamel paint complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F stainless steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

M&L preparation of new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

S&F for 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white and with weight of sheet not less than 9kg per sqm as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed.

S&F 75 mm long hasp and staple, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement including dismantling old tiles etc, removal of rubbish complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick in CM (1:4) bedding layer of mortar rough finished including dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed.

M&L for 17-18mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of old stones/tiles complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed.

S&F Mild steel TMT bars bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed.

M&L for reinforced cement concrete 1:2:4 type B-0 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies,facia, canopies, deck slabs and in shelves including necessary formwork and the like complete all as specified.

Demolition Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed

Dismantling framed timber scantlings under 40 sq. cm and over in section, in any position

M & l for clean sawn second class soft-wood in scantlings framed work as in ceiling frame

M & l for 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws all as specified and directed

M&L 2nd classp plain fillets exc 3 sqcm n exc 6sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads

M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls of any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick cement plaster in two layers (10mm th base layer and 5mm th finishing layers) on fair faces of brick work or concrete surfaces in cement mortar (1:4) external layer finished even and smooth without using extra cement mixed with WPC complete all as specified and directed. (WPC shall be measured and paid separately)

M&L Preparation of new plastered surface of external wall, making surface smooth with sand paper, priming surface with alkali resistance primer paint and applying two coats of cement base paint including curing complete all as specified & directed.

M&L preparation of new surfaces, applying a coat of wall care putty to obtain smooth and evern surface, applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified & directed.

M&L one coat of synthetic enamel paint on over a coat of lead primerover old untreated steel surfaces of any description, over 10 Cm in width or girth, including preparation of surfaces, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light ,fan,socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separatly) and making good disturbed surfaces of wall, floors etc.

M & L for point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size(two run with colour code RYB) for one light point ,fan point, exhaust fan point,or bell point controlled by one switch including one run of 1.5 Sqmm (as continous earth wire Green)multistrand PVC concealed conduit of approved size and quality ISI marked,including all other required accessories as specified in preamable 1(a) to (q) of section 19 of SSR Part-II under heading 'point wiring' fixedon wall/ceiling including sunk cast iron terminal boxes grouting/flushing on wall for mounting fittings like switch,sockets etc covered with 3.00 mm thick plastic laminated sheet top cover of brick masonary/Stone masonary wall complete including cutting,chasing,pinning and making good the disturbed surface by using cement mortar 1:3 complete all as specified and directed by Engr-in-charge.(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plaster and matching the surface by white wash/colour wash all as per existing finishes complete).

All as per Srl item No 2 here in before but for one 5 amps socket outlet on same board.

All as per Srl item No 2 here in before but for one 5 amps socket outlet on independent board.

All as per item No 2 above but for power point 3 pin switch socket 16 Amp with PVC insulated copper conductor cable multistrand unsheathed 4 Sqmm (two run with colour code RYB) on independent board including one run of 4 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in concealed PVC conduit of appropriate size and best quality ISI marked, including all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed on wall including sunk cast iron or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.

Supply & Fixing in replacement of Switch piano, flush button, single pole one way 6 Amps

Supply & Fixing in replacement of Socket outlet 3 pin, 6 amps flush type.

Supply & Fixing in replacement of Switch piano, flush button, single pole one way 16 amps

Supply & Fixing in replacement of Socket outlet 2 in 1,3 pin 5 and 16 amps flush type.

Supply and fix in replacement of ceiling rose 65X50 mm two to three terminals complete all as specified.

S & F in replacement of tube light fitting box type suitable for LED 18W/20W Tube Rod with decorative colour and cap made out of CRCA sheet powder coated complete with housing with all accessories pre and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18/20W LED tube rod 4 feet long complete all as specified and directed.

Supply & Fixing in replacement of Sheet metal enclosure for DB,s, double door (when MCB,s to be used) single pole & neutral 8 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's any type including taking down of kitkat fuse/MCB SPN/SP as directed by Engineer-in-charge.

Supply and fixing in replacement of MCB single pole and nuetral 6 to 40 Amps, 240 volts complete all as spd and directed.

Supply and fixing in replacement of MCB single pole 6 to 32Amps, 240 volts all as spd and directed.

M & L for sub main wiring with 10.0 sqmm copper conductor cable multistrand, FRPVC sheathed two run (as phase and neutral) and run 10.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in one pvc concealed wiring complete all as specified and directed by Engr-in-charge.(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).

Supply & fixing Exhaust fan size 450 mm sweep heavy duty Steel body complete with louvers and all fixing accessories including making hole in wall comptete fixing arrangement in any condition and connection complete. all as specified and directed by Engr-in-charge.

Supply and fixing electric geyser of capacity 25 lts, 5 star rated, including two Nos of 400 mm long hot and cold PVC Connection including grouting of Nuts, bolts & washer on wall complete all as specified and as directed by Engr-in-charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optice complete with IP 65/66 protection complete all as specified and as directed by Engr -in- charge.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in PCC (1:2:4), type B-I using 20mm graded crushed stone aggregates with 40mm thick precast cover of size 550 mm X 550 mm X 75 mm of RCC (1:2:4), type B-I, reinforced with XPM (weight not less than 4 kg/ Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion.

Havish Construction (BID ID -3438989)

M/S WALIA ENGINEERS (BID ID -3443518)

m/S Varun Gupta (BID ID -3448932)