Repair to Leakage, Seepage of Bath Toilets and Sunken Portion in Domestic Area under AGE B/R-I at GE (AF) Bhisiana

Amount

Demolition of concrete above ground floor for sunken portion exc 15 cm thick and removing the rubbish out side MD land complete all as specified.

M&L for 15 mm thick rendering in cement mortar (1:4) as in sunken portion mixed with water proofing compound 3% by weight of cement, finishing surfaces even & smooth without using extra cement complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid seperately

Supplying only integral water proofing compound, ISI marked complete all as specified and as directed.

M&L for bitumen blown any grade, applied hot, two coats to concrete surfaces at the rate of 1.5 Kg per Sqm per coat complete all as specified.

M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in filling of sunken and mass concrete complete all as specified and as directed.

M&L for Cement concrete type, B1, 1:2:4 (20mm graded stone aggregate) 25mm thick including finishing the surfaces even and fair to receive floor finishes.

M&L for 50mm dia GI spout pipe fixed in sunken floors by means of cutting holes in wall bedded in cement mortar and making good the disturbed portion of wall complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified.

Material and labour Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. including 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

Material and labour Coloured for Glazed ceramic tiles in vertical surface 350x250x7 mm / 450x350x7mm thick including 10mm thick cement plaster in CM 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match complete.

Material and labour for coloured joint free Rectified tiles 9 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified.

Material and labour for coloured joint free Rectified Tiles 9 to 10mm thick (square/rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:3 to receive vertical tiles complete all as specified.

Material and labour for joint free light shade vitrified tiles 9 to 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified.

Material and labour for joint free light shade Vitrified Tiles 9 to 10mm thick (square/rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:3 to receive vertical tiles complete all as specified.

Material and labour 12-15mm thick green marble slab flooring including 15mm thick screed bed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab one side bullnosed including dismentling existing slab/stone etc complete

Material and Labour 12-15mm thick green marble including 10mm thick cement plaster in CM 1:3 t in riser of steps, skirting , dado and pillar with one side bullnosed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including dismantling of existing stone etc complete

Material and labour 15 mm dia tubes medium grade galvanised with all fitting and fixed to walls and ceilings or laid in floors including taking down and cleaning for removal to store etc complete all as specified.

M&L for 20 mm dia tubes, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and as directed by Engineer-in-charge.

Dismantling including Ball Valve and Water Tanks exc 250 ltr and nexc 500 ltr and complete removing to store

M&L for Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed..

S&F in repairs Gun metal gate valves 20mm dia with iron wheel head screwed both ends for iron pipe complete.

S&F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F as in repairs 100 mm bore Traps 'P' or 'S' long neck complete.

S&F in repair Vitreous china squatting pan , 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests complete including provision of lime concrete bedding complete.

S&F in repair china wash down water closet padestal pattern white excluding flush and fix to position, including connection to drain etc all as specified as directed.

S&F plastic water closet seat white close pattern with flat bottom and cover complete all as specified as direected.

S&F 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) but as in repairs

S&F Flush pipe of Polyethylene of low or high density or PVC 32 mm dia, for low level cistern

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm fixed on existing brackets or stands all as specified and as directed.

S&F 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe as fixed in repairs.

S&F 15 mm bore Stop Valve Chromium plated with long shank and cup (concealed type) ,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed in repairs

S&F 15mm bore Stop valves, but fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm

S&F in repairs Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges.

S &F in repairs 15mm dia Bib taps, fancy type Chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete

S&F 32 mm dia PVC Waste pipe for Wash hand Basin

S&F Brass Chromium plated shower rose 125 mm size with or without swivel joints,including fixing to steel pipe or union in repairs

S&F in repairs sinks made of stainless steel 1mm thick kitchen or labo-ratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brack-ets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

Taking down cement plaster on brick or stone masonry Including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick plaster in 1:4 cement mortar and finishing the surface even and smooth without using extra cement including applying two coat of cement base paint over and after preparation of new plastered surfaces.

Material and labour for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc including applying two coats oil bound distemper (OBD) over and after preparation of plastered surfaces complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc including applying two coats white wash over and after preparation of plastered surfaces complete all as specified and directed.

Material and labour for 10 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces in ceiling including applying two coats of white wash complete all as specified and directed.

Demolition of cement concrete in any description and in any position not otherwise specifically provided for.

Material and labour for 50mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of brick or stone boulder masnory, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facing, dressed stonework and percast concrete articles.

M&L for Brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean redius, biult in 1:6 cement mortar.

Dismantling brick tiles or terracing tiles single layers on roof complete all as specified and directed

Demolition of mud in roofs, any thickness including plastering and leaping (where full thickness removed or only a part thereof) complete all as specified and directed

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dusdt etc

M&L for Brushing neat cement slurry with 3.0 kg of cement per sqm

M&L 40mm thick PCC floor type B-1:2:4 (20 mm graded crushed stone aggregated) laid in sloping on roof padding finished even and smooth without using extra cement complete all as specified and directed

M&L for 10mm thick cement plaster in cement mortar 1:4, including finishing even and smooth with out using extra cement mixed with water proofing compound when concrete is green, as per manufacturere instructions complete all as specified. Note - Water proofing compound shall be measured and paid separately.

M&L for APP based polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/Sqm), laid with forced application over roof surface with a coat of hot blown bitumen conforming to IS-3384-1965 of grade 85/25 @ 1.2 kg/Sqm at bottom of the membrane as bonding material, and a coat of bituminous aluminium primer on top complete all as per manufacturer's instructions all as specified and directed by Engineer-in-Charge.

M&L for Removing of bushes upto 10 cm dia trunk, grass from roof top, racking out joints/pointing to brick tiles and flush pointing with 1:3 cement mortar with water proofing compound, all as specified as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including clamps, nut bolts including dismantling of old AC rain water pipe etc.

Supply and fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F 75mm bore( Sand Cast ) Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls but as in repairs

S&F 100 mm bore (Sand Cast) Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints , fixed to walls but as in repairs

S&F 75 mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door as in repairs

S&F 100mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door as in repairs

S&F 75 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door in repairs

S&F 100 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door in repairs

M&L for cement concrete 1:2:4 type B1, (20 mm graded aggregate) as in repair of chajjas, suspended slab etc, including demolition with wooden hammer and necessary formwork complete all as specified as directed by Engr-In-Charge.

M&L for cutting out cracks to V section in exiting roofs or terracing, claeaning out, and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 complete all as specified as directed

M&L for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets etc and surface painting with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sqm binded with grit or pea size gravel @ 0.006 cum per sqm and lightly tampered etc complete all as specified as directed.

M&L for Shutters of any description exc 1 sqm, but not exc 2 sqm each taking down and refix in same opening after easing and cutting in required length and width with necessary screwing and naling if required all as specified as directed.

Taking down Chowkhats or frames with shutter not exc 1.5 Sqm each (without taking off shutters from the frames)

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing .

S&F Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg.

S&F 100mm size PVC butt hinges complete all as specified and directed.

S&F 100mm size PVC handles Complete all as specified and directed

S&F 150mm long PVC tower bolt Complete all as specified and directed.

M/s Kamal Builders

M/s Vee Kay Associates

M/s Luxmi Constructions

M/s BALDEV SINGH