REPAIR TO JOINERY, ROOF, FALSE CEILING, CHHAJJA, ROOF TREATMENT, PLINTH PROTECTION, FLOOR TILING AND WALL TILING FOR ZONE-I UNDER AGE B/R-I AT DINJAN MIL STN UNDER GE DINJAN

Dismantling asbestos cement (corrugated/semicorrugated etc) sheet as in roof covering complete all as specified and directed.

M&L for 6 mm thick asbestos cement corrugated or semi-corrugate sheets as in roofs, walls, etc fixed with L or J-type or cranked hook bolts complete all as specified and directed.

M&L for asbestos cement two piece adjustable plain wing ridge 6 mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (gde-E-250) quality -A complete all as specified and directed.

S&F for rolled mild steel in steel work tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for painting to steel and iron surfaces of steel surfaces of any description, over 10 cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over coat of red oxide primer including preparation of new surface complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for reinforcement cut to facilited demolition complete all as specified and directed

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surface of concrete complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6mm to 8 mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for cleaning and removing all scale and dirt, etc, from tanks exc.250 Ltrs not exc. 500 Ltrs and from mouths of circulating pipes, etc. complete all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc, from tanks exc.500 Ltrs not exc. 1000 Ltrs and from mouths of circulating pipes, etc. complete all as specified and directed.

S&F in repairs for 20 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulatedjointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed.

M&L for Anodised aluminium snap grid size 605 X 605 mm frame work for false ceiling complete all as specified and as directed

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed

M&L for 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed

S&F Plywood 6 mm thick , grade BWR, type BB, fixed to timber frames in ceiling, flat or sloping all complete all as specified and directed.

M&L for plain fillet second class hardwood well seasoned exc 6 and n.exc 13 Sqcm square rectangular or tringular in section bullnosed,splayed chamfered secured with nails etc complete all as specifed and directed.

M&L for plain fillet second class hardwood well seasoned exc 13 and n.exc 25 Sqcm square rectangular or tringular in section bullnosed,splayed chamfered secured with nails etc complete all as specifed and directed.

M&L for two coats of distempering on seamless ceiling with distemper oil emulsion white or tinted over & incl 3 mm thick wall care putty to make the surface even & smooth including preparation of ceiling complete all as specified and directed.

S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F for Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

Dismantling of unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

M&L for Second class hard-wood well seasoned scantlings wrought timber fixed complete all as specified and directed

Taking down the Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frames) complete all as specified and directed

Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed

Taking down the Shutters of any description n exc 1 sqm each complete all as specified and directed

Taking down the Shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and directed

M&L for taking down & refixation of shutters of any description in same opening n exc 1 sqm each after repair work complete all as specified and directed

M&L for taking down & refixation of shutters of any description in same opening exc 1 sqm but not exc 2 Sqm each after repair work complete all as specified and directed

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L for 35 mm thick 2nd Class Hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on one sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F 30mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed.

S&F 35mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed.

S&F Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2020 complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2020 complete all as specified and directed

M&L PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast,coping and filling of steel chowkhat etc. complete all as specified and directed

S&F mild steel flat iron as in hold fast 25x6 mm confirming to Fe290 Gde E-165 complete all as specified and directed

S&F in repairs 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs Aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and directed.

S&F in repairs Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F in repairs 75 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed

S&F in repairs 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed

S&F 75 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed

S&F in repairs Aluminium Handle 100 mm long cast type, anodised extruded fabricated type complete all as specified and directed.

S&F in repairs Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and directed.

S&F Aluminium Handle 100 mm long cast type, anodised extruded fabricated type complete all as specified and directed.

S&F Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair 375 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted wooden surface of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of new or untreated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and directed.

M&L for Preparation of old painted surfaces of steel and iron of any description, over 10cm in width or girth, not otherwise described, applying one coat of synthetic enamel paint complete all as specified and directed

M&L for fixed in repairs pelmet boxes or in narrow widths n. exc 15cm each, with 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and fixed with wooden beading complete all as specified and directed

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement Mortar in 1:4 using water proofing compound in top layer (Water Proofing Compound measured separately) and finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra lime or cement)complete all as specified and directed.

Supply only Liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and directed

M&L for preparation of new plastered surface of walls etc and applying two coats of cement base paint over alkali resistant priming paint including complete all as specified and directed

M&L for preparation of new plastered surface of walls etc and applying two coats of distempering interior walls with distemper oil emulsion white or tinted over chalk whiting complete all as specified and directed

M&L for preparation of new plastered surface of walls etc and applying three coats of white wash complete all as specified and directed

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair 4 levers brass mortice lock, verticle type, size 100mm complete all as specified and directed.

S&F Aluminium (Extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L for preparation and treating ends of posts, back of chowkats etc area of tarred exc 0.10 Sqm but n.exc 0.50 Sqm complete all as specified and directed.

M&L for preparation and treating small articles, area tarred n.exc 0.10 Sqm each such as hold fasts end of posts, back of chowkhats complete all as specified and as directed.

S&F mild steel Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Anodised aluminium ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed

S&F in repair 1 mm thick mild steel plain black sheet in wall cladding, eaves, steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles, etc as required.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for light shade vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15 mm thick screed in CM 1:6 complete all as specified and directed.

S&F designer curtain rail with fixing Brackets as per sample kept in GE Office complete all as specified and directed.

S&F pre-laminated MDF board 5.5mm thick DWR Grade -1 with one side laminates wooden texture as approved fixed to wall all as specified and directed. Make : Century or equivalent make as specified in PS.

S&F 8 mm thick aluminuim duco grill size 75x75 mm fixed to windows or ventillators with aluminium flat 30x3mm complete all as specified and directed.