Repair and Renovation of Office and Residence of Range Officer Reasi Reasi range in Reasi Forest Division under UT Capex FY 2026-27

Removing dry or oil bound distemper, water proofing cement paint and the the by scrapping and sand papering and preparing the surface smeeth Including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick

Distempering with oll bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: Second class Kall wood 30mm

Steel work welded in built up sections/framed work, including cutting, hoisting. fising in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings. brackets, gates and 10.25.2 similar works.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement 14.1.1 mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing aluminum tower bolts ISI marked anodized (anodic conting not less than grade AC 10 as per IS: 1868) transparent or dyed to 9.99.4 required colour or shade with necessary screws etc. complete: 150x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required 9.102.1 colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Twin rubber stopper