COMPREHENSIVE MAINT INCL JOINERY, PLUMBING, SANIRTARY FITTINGS, TILING, WALL PANELLING AND ROOF TREATMENT IN OTM ACCN AND MD ACCN IN ZONE II UNDER AGE B/R III OF GE (SOUTH) MEERUT CANT

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete all as specified and directed.

Material & labour 50mm thick PCC 1:3:6 type C-2 as in fllooring , etc finished the surface even & fair complete all as specified and directed.

Material & labour 75 mm thick PCC 1:3:6 type C-2 as in plinth protection, path etc finished the surface even & fair complete all as specified and directed.

Supply and fix Joist, channel, angle, or tee sections fixed independently, without connecting plates for chajjas, truss, purlin and door frames complete all as specified and directed.

Supply and fixin repair 2 mm thick fibre glass sheet reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in chajja roof, wall including demolition of old chajja/ etc. complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof covering complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section in any position complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material & labour fibre sheet cement 6mm thick corrugated or semi corrugated sheets fixed in roofs with J or L hooks including bitumen washer complete all as specified & directed.

Material & labour fibre sheet cement 6mm thick two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed in roofs with J or L hooks complete all as specified & directed (Make - Charminar/Uppal/Everest)

Dismantling structural steel work incl doors, chajja, gates in any position all directed by Engibneer-in-Charge

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.5 Sqm but n.exc 4 sqm each and removing from site complete all as specified and directed.

All as per Item No.13 above but area n.exc.1.5 Sqm each. complete all as specified and directed.

Taking down shutter of any description area exc. 1 Sqm but n.exc.2 Sqm each and removing from site complete all as specified and directed.

All as per Item No 15.00 above but area n.exc.1.0 Sqm each complete all as specified and directed.

Supply & fix 30mm thick flush shutter solid coreconstruction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply & fix 35mm thick 2nd class hard wood (Sal) plain, framed, panelled shutters (any number of panels) with panells of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneers complete all as specified and directed.

Supply & fix 35mm thick 2nd class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc, without sash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specified in SSR Part-I section 8 supplied and fitted to chowkhats all as specified.

Supply & fix 100mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

Supply & fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Supply & fix 250mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

Supply & fix 100mm size aluminium anodised hasp & staple safety type and fixing bolts to hinge plate fixed with screws complete all as specified and directed.

Supply & fix in repair 150mm long for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed on floor complete all as specified and directed.

Supply & fix continuous piano hinges, mild steel bright finish or electro galvanised width of flaps 30mm when open complete all as specified and directed.

Material & labour for 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed including 1mm PVC lipping on all exposed edges including taking down old worn out boarding of any description complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

Material & labour for 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed. Note:- fixing of glass upto height 7 m

Supply & fix in galvanised steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

All as per Item No 29.00 above but fixed in repairs complete all as specified and directed.

Material & labour for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Material & labour for factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togathers with solvent cement supplying & fixing the frame at site Make : Rajshri/SINTEX (Make should be engraved on item ) complete all as specified & directed.

Supply & fix butt hinges stainless steel 100mm with screw complete all as specified and directed.

Supply & fix MS butt hinges medium weight 100mm with screw complete all as specified and directed.

Supply & fix in repair magnet catcher suitable for cupboard shutter complete all as specified and directed.

Taking down cement or cement lime plaster any description from brick or stone walls/ceiling etc including raking out joints, hacking for key & scrubbing down with water complete all as specified and directed.

Material & labour for rendering 15mm thick in CM 1:6 on brick work or concrete surface of wall and finished surface even and smooth complete all as specified and directed.

Material & labour for rendering 5mm thick in CM 1:4 on ceiling and finished surface even and smooth complete all as specified and directed.

Material & labour for preparing newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

All as per Item No 39.00 above but two coats white wash on ceiling complete all as specified and directed.

Material & labour for complete removal of existing treatment of walls and applying JK / Birla wall care putty to make surface even and smooth complete all as specified and directed.

Material & labour of newly plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.

Material & labour of old plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.

Material & labour for prepration of old plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Material & labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces complete all as specified and directed.

Material & labour for preparation of old painted surface of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per Item No 46.00 above but on steel surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply & fix non skid glazed ceramic tiles (any shade) of size 400mmx400mmx7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:6 complete all as specified and directed. (Make: Kajaria/Somany/Orient and as specifed in PS.

Supply & fix Light shade vitrified tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick as on floor/skirting etc set and jointed with favimate/ball endura adhesive and joints grouted including 10mm thick screed in CM 1:4 and all as per manufacturer's instruction complete all as specified and directed. (Make- Kajaria / Somany /Johnson / Orient and as specified in PS.

All as per item No 50.00 above but in skirting / dado and including 10 mm thick screed bed CM1:6 complete all as specified and directed. Make-Kajaria/Somany/Orient and as specified in PS.

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Material & Labour for 20 to 22 mm thick designer tiles of Make: Ultra/Duracrete of design as approved by GE of any size and pattern laid and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Supply & fix 25mm dia MS fancy type vista pattern curtain rod of approved finish of superior quality including fancy type knobs at both ends, bracket for supports & rings etc complete all as specified and directed.

Supply & fix vitreous china wash down water closet pan (Pedestal pattern) white, with 'P' or 'S' trap including connection to trap and cistern and flush pipe excluding flushing cistern) including PVC white seat cover, closed pattern fixed with aluminium hinging device and making good to disturbed surface of floor, fixed as in repair complete all as specified and directed by GE/Engineer-in-charge. Make- Pearl/cera/prayag and as specified in PS.

Supply & fix in repair plastic seat cover for water closet, white closed pattern with flat bottom & cover and aluminium anodised hinging device complete all as specified and directed. by GE/Engineer-in-charge.

Supply & fix PVC dual flushing cistern with double flush button Cat Part No. - C-002 Pearl/ CAT Part No B 1020101 Cera in 10 Ltrs as approved by GE/ Engineer-in charge.

Supply & fix chromium plated jet, ABS jet health fauset including stainless steel tube of standard length fixed in WC seats complete all as specified and directed.

Supply & fix in repair PVC connection of 15mm bore 600mm long with brass coupling on both ends of superior quality complete all as specified and directed.

Supply & fix in repair CP brass 75mm dia shower rose with or without swival joints with arms suitable 15mm bore pipe fixed as in repair complete all as specified and directed.

Supply & fix vitreous china wash basin white flat back type of size 550x400mm including cutting for and pinning in ends of brackets as in repair and 32mm dia chromium plated waste coupling complete all as specified and directed by GE/Engineer-in-charge.Make- Cera/Pearl/Prayag and as specified in PS.

Supply & fix kitchen sinks made of stainless steel 0.80mm thick with plug, washer and waste including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, over all size1140mmx510mm and bowl size 560mmx405mm complete fixed in repair all as specified. Make: Nirali or as approved by GE/Engineer-in-charge.

Supply & fix superior quality CP brass tubular towel rail 20mm dia, D type, 60 cm long between flanges fixed as in repair complete all as specified and directed.

Supply & fix 15mm CP dia bib taps of superior quality with long body cast copper alloy with crutch or butterfly handle screwed for iron pipe fixed as in repairs, complete all as specified and directed. Make - Cera Cat Part No-F-1014152/ Pearl Cat Part No- ARI-003/ Hindware Cat Part No-F330011

Supply & fix 15mm dia pillar taps of superior quality cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screws for iron pipe fixed as in repairs complete all as specified and directed.

Supply & fix 15mm bore single lever centre hole basin mixture of superior quality with capstan heads, cromium plated cast copper alloy with hot and cold arrangements with long shank and cup , screws for iron pipe fixed.as in repairs Make all as specified and directed. Make- Cera Cat Part No F-2002461/ Pearl Cat Part No ARI-013/ Hindware Cat Part No- F-74 0009

Supply & fix 15mm dia CP angle valve, cast copper alloy, chromium plated of superior quality fixed as an repairs complete all as specified and directed. Make- Cera Cat Part No F-2002361/ Pearl Cat Part No ARI-004/ Hindware Cat Part No- F-330043

Supply & fix CP brass shower rose of superior quality long body with or without swivel joints of 125mm size fixing with 15mm pipe fixed as in repairs, complete all as specified and directed.

Supply & fix in repair brass chromium plated wall mixer (three in one) suitable for both telephonic shower and overhead shower with long bend pipe complete all as specified & directed. Make- Cera Cat Part No F-1017401/ Pearl Cat Part No ARI-015/ Hindware Cat Part No- F-74 0022

Demolition and breaking up drain pipes (SGW, AC or reinforced concrete) or PVC pipe set in cement mortar for 75mm/100mm internal dia of pipe and including from the site complete all as specified and directed.

Supply and fixin repairs 75mm bore PVC rain water pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

All as per item No 72.00 above but 100/110 mm bore PVC (SWR) pipe complete all as specified and directed.

Supply & fix in repair 75mm bore PVC (SWR) bends any radious complete all as specified and directed.

Supply & fix in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply & fix in repair 100mm dia CP grating complete all as specified and directed.

Supply & fix in repair PVC waste pipe 32mm dia for wash hand basin complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore including cleaning for refixing or removal from the site complete all as specified and directed.

All as per serial item No 80 above but 20mm bore complete all as specified and directed.

Supply & fix GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor as directed complete all as specified and directed.

All as per serial item No 82.00 above but 20mm bore complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes for exc 250 & n exc 500 ltr capacity including writing date and year of cleaning of height not less than 50mm and width not less than 20mm on plain base with synthetic enamel paint etc complete all as specified and directed.

Dismantling existing water tanks capacity exc. 250 ltrs but n exc. 500 ltrs, removing from site complete all as specified and directed.

Supply & fix 500 ltrs capacity rotational moulded polyethylene water storage tree layers tanks (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed. Make: Sintex/Dhara/Rotex and as specified meke in PS.

Supply & fix ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minium weight 20mm - 210 gms complete all as specified and directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material & Labour for 40mm thick average thickness of PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed.

Supply only integral water proofing compound complete all as specified and directed.

Materials and labour for applying one coats of exterior emulslon paint (weather proof) applying apex (Ultima) of M/S aisan paints ofr equivalent over prepared surface of walls complete all as specified and directed.

Supply and fix2nd class hard wood, plain, solid, straight in scantling or chowkats and frame rebated on solid , rounded or chamfered put together with glue pinned at joint all as specified and directed.

Supply and fixframed work as in doors or gates of angle or other section with gusset plates, rails, braces etc…,complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of steel grade Fe-290, E-165

Material & labour for brick work with fly ash bricks, built in CM (1:6) straight or curved exceeding 6mtr mean radius complete all as specified and directed.

All as per item No 95.00 above but except bricks complete all as specified and directed.

Demolition of brick work built in cement morter including all quoins, arches, pillars etc, complete all as specified and directed.

Dismantling of PVC wall lining consisting of 5mm thick plain colour PVC sheet complete all as specified and directed.

Supply and fixsolid PVC wall lining consiting of 5mm thick plain wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

Material & labour pressed steel frames of section 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strick plate etc complete all as specified. Make - Chandani industries / Trishul Industries and as specified make in PS.

Material & labour pressed steel frames of section 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strick plate etc complete all as specified. Make - Chandani industries / Trishul Industries and as specified make in PS.

Material and labour for 18/19 mm thick block board interior grade commertial water proof plywood fixed with screws to timber frame work for cabinet, both sides covered with 0.80mm thick decorative laminates, "Mica" type 1 of surface finished, colour and pattern as approved fixed with approved adhesive as per manufacturer’s instructions including taking down old u/s boarding of any description complete all as specified & directed.

Supply and fix auto hinges for cabinet case complete all as specified and directed.Make ; KARF/HETICH and as specified make in PS.

Supply & fix stainless steel plain basket of size 17”x20”x6” complete all as specified and directed. Make: Everlite/ Slimline/Peacock/Fabshineand as specified make in PS.

Supply & fix stainless steel partition of size 17”x20”x6” complete all as specified and directed. Make: Everlite/ Slim line Peacock/Fabshine complete and as specified make in PS.

Supply & fix stainless steel cutlery of size 17”x20”x6” complete all as specified and directed. Make: Everlite/ Slim line Peacock/Fabshine and as specified make in PS.

Supply & fix stainless steel grain trolly with stand of size 21”x17”x10” complete all as specified and directed. Make: Everlite/ Slimline Peacock/Fabshine and as specified make in PS.

Supply & fix stainless steel cup & soucer, trolly of size 17”x20”x4” complete all as specified and directed. Make: Everlite/ Slim line Peacock/Fabshine and as specified make in PS.

Supply & fix stainless steel Plate basket of size 17”x20”x6” complete all as specified and directed. Make: Everlite/ Slim line Peacock/Fabshine and as specified make in PS.

Supply & fix 20” long telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed Make: Nixon/Radol/Ozone Ultima and as specified make in PS.

Supply & fix 150 mm size stainless steel bright finish handle for cabinet shutter complete all as specified and directed.

jitendra AND Co

M/S AMAR ELEKTRO CENTRE

Jay Ambay Enterprises

Tayal Builders