Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹13.3 Cr
EMD Value
₹8.1 L
Closing Date
19 Jan 2026, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Electrical TRD portion work involve in Construction of long haul loop lines between Pune Lonavala section at Dehu road & Dapodi stations and construction of extended loop lines between PA-DD section at Yavat(YT) station in Pune division.
PUNE_ELECT_TRD_2025_21~CR
PUNE_ELECT_TRD_2025_21
Open
Works - General
12 Months
Pune, Maharashtra
₹0
₹8.1 L
19 Jan 2026
24 Dec 2025
5 Jan 2026
1A-Work 1 Electrical TRD portion work involve in Construction of long
Supply of fabricated / roled galvanised traction masts, portals, TTC.
Erection of traction masts, Portal & TTC Boom by Road crane/ Rail crane in PB.
Erection of traction masts, Portal & TTC Boom by Road crane/ Rail crane in NPB.
Supply of fabricated galvanised of small parts of steel (SPS).
Erection of fabricated galvanised of small parts of steel (SPS). in PB.
Erection of fabricated galvanised of small parts of steel (SPS). in NPB.
1B-work 1 Electrical TRD portion work involve in Construction of long
Preparation of designs & drawings for overhead equipment
Supply Guy rod assembly including SPS
Erection of Guy rod assembly including SPS in PB.
Erection of Guy rod assembly including SPS in NPB.
Transporation & erection of 193/150 Sq mm copper contact wire
Transporation & erection of 125 Sq mm copper catenary wire
Supply of dropper and dropper adjustment for contact wire 193/150 Sqmm and catenary wire 125 Sqmm
Erection of of dropper and dropper adjustment for contact wire 193/150 Sqmm and catenary wire 125 Sqmm
Supply of standard bracket assembly suitable for 125/65 sq mm catenary wire and 193/107/150 sq mm contact wire . It includes load transfer ofstandrad bracket from existing bracketassembly.
Erection of standard bracket assembly suitablefor 125 sq mm catenary wire and 193 sq mmcontact wire . It includes load transfer ofstandrad bracket from existing bracketassembly. (In
Supply of Regulating equipment 5 pulley block type with counter weight
Erection of Regulating equipment 5 pulley block type with counter weight. (in
Supply of materials for termination of Double Overhead equipment conductor including insulator.
Erection of materials for termination of Double Overhead equipment conductor including insulator in PB.
Erection of materials for termination of Double Overhead equipment conductor including insulator in NPB.
Supply OHE termination assembly including porcelain 9-tonne insulators.( for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm)
Erection OHE termination assembly including porcelain 9-tonne insulators.(For BWA, FTA,FA, ACA) (in PB/NPB)
Supply of Anticreep arrangement with 125/65 Sq. mm catenary wire for conventional type OHE.(Catenary wire will be supplied by Rly.)
Erection of Anticreep arrangement with 125/65 Sq. mm catenary wire for conventional type OHE in PB.
Erection of Anticreep arrangement with 125/65 Sq. mm catenary wire for conventional type OHE in NPB.
Supply of Solid core cut-in insulator with component for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm.
Erection of Solid core cut-in insulator with component for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm in PB.
Erection of Solid core cut-in insulator with component for contact wire 193/107/150 23 Sqmm and catenary wire 125/65 Sqmm in NPB.
Supply of Solid core suspension insulator with component for wire of 125/65/150 Sqmm.
Erection of Solid core suspension insulator with component for wire of 125/65/150 Sqmm. in PB.
Erection of Solid core suspension insulator with component for wire of 125/65/150 Sqmm. in NPB.
Supply of 25 KV solid core Post insulator with component.
Erection of 25 KV solid core Post insulator with component in PB.
Erection of 25 KV solid core Post insulator with component in NPB.
Supply of 25 KV Single Pole Isolator complete Assembly including operating rod & post insulator with mounting base.
Erection of 25 KV Single Pole Isolator complete Assembly including operating rod & post insulator with mounting base in PB.
Erection of 25 KV Single Pole Isolator complete Assembly including operating rod & post insulator with mounting base in NPB.
Supply of Section Insulator assembly including insulator for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm in PB.
Erection of Section Insulator assembly including insulator for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm in PB.
Erection of Conventional type Section Insulator assembly including insulator for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm in NPB.
Supply of galvanized nut-bolt washer(plain and spring type) of size 16 x 50mm with check nut etc
Erection of galvanized nut-bolt washer(plain and spring type) of size 16 x 50mm with check nut etc
Supply of Galvanised MS Flat 40x6 mm confirming to IS:2062/2011 or latest Grade Designation.
Erection of Galvanised MS Flat 40x6 mm
Splicing and extension of an anchored OHE including supply of contact & catenary splice for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm.
Dismantling of OHE including SPS, DA, cantilever etc but without structures in PB.
Dismantling of OHE including SPS, DA, cantilever etc but without structures in NPB
Dismantling of Portal / TTC uprights & mast by cutting.(in PB/NPB)
Dismantling of OHE portal booms / TTC boom including SPS. (In PB/NPB)
Dismentalling of Regulating equipment with counter weight assembly in PB
Dismentalling of Regulating equipment with counter weight assembly in NPB
Dismantling of termination assembly.(in PB/NPB)
Dismantling of bracket assembly.(in PB/NPB)
Dismantling of Guy Rod assembly.(in PB/NPB)
Dismantling of anticreep arrangement.(in PB/NPB)
Dismantling of Section insulator Assembly.(in PB/NPB)
Dismantling of Isolator including earth contact.(in PB/NPB)
Dismantling of DA assembly Under PB/NPB.
Dismantalling & re-erection of Number Plate. (in PB/NPB)
Dismantalling of various types of bonds.(in PB/NPB)
Supply of Caution Board.
Erection of Caution Board.
Supply of retro-reflective Number Plate including hardware.
Erection of retro-reflective Number Plate including hardware.
Breaking of foundation.
Supply & erection of Sectioning / Station Working Rule Diagram.
Supply of Danger board.
Erection of Danger board.
Supply of Key Box for Station.
Supply of single earth electrode
Erection of single earth electrode
Supply for Extra forspecial embedment of earth electrode.
Erection for Extra forspecial embedment of earth electrode.
Erection of any type jumper assembly such as "G"jumper, AT jumper, Isolator jumper etc. in NPB
Erection of any type jumper assembly such as "G"jumper, AT jumper, Isolator jumper etc. in PB
Supply of Copper jumper wire(160 sq mm)
Supply of 193-129/105/150/160(FM -15 PG)
Supply of PG clamp 125/160 sq mm
Erection of PG clamp 125/160 sq mm
Supply of P.G.Clamp (1030-2) complete assembly
Supply of P.G.Clamp (1030-3) complete assembly
Supply of P.G.Clamp (1051-3) complete assembly
Dismantling of 25KV Post/Pin insulator.(in PB/NPB)
1C-work 1 Electrical TRD portion work involve in Construction of long
Cement concrete forfoundation & plinth inother than hard soil &rock. (Foundation shouldbe M-15 type as per IS-456, i.e ratio 1:2:4,cement quantity perCu.M. of foundation =6.5 bags of 50 Kg each)
Cement concrete forfoundation & plinth inhard soil & rock.(Foundation should be M- 15 type as per IS-456,i.e ratio 1:2:4, cementquantity per Cu.M. offoundation = 6.5 bags of50 Kg each)
1D-Work 1 Electrical TRD portion work involve in Construction of long
Preparation of design & dwaring for overhead equipment.
Cement concrete for foundation & Plinth:- In other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i,e ratio 1:2:4).
Supply of galvanized steel for structure.
Erection of galvanized steel for structure.
Supply of galvanized small parts steel (SPS).
Erection of galvanized small parts steel (SPS).
Supply of Copper jumper wire (50 sq mm).
Supply of P.G.Clamp (1040-2) complete assembly.
Erection of any type jumper assembly such as "G"jumper, AT jumper, Isolator jumper etc. in PB
Supply of solid core suspension insulator assembly for AT supply.
Erection of solid core suspension insulator assembly for AT supply.
Supply of 25 KV DO fuse switch assembly including insulators.
Erection of 25 KV DO fuse switch assembly including insulators.
Supply of 25 KV/240 V, 25 KVA AT complete assembly as per RDSO specification.
Erection of 25 KV/240 V, 25 KVA AT complete assembly as per RDSO specification.
Supply of LV box assembly for 25 KVA auxiliary transformer as per drawing.
Erection of LV box assembly for 25 KVA auxiliary transformer as per drawing.
Supply of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware.
Laying of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware.
Supply of anticlimbing device with GI barbed wire etc, for AT mast.
Erection of anticlimbing device with GI barbed wire etc, for AT mast.
Supply of Retro reflective type Location number plates.
Erection of Retro reflective type Location number plates including clamps & nut bolts
Supply of 25 KV Caution Board in electrified area as per RDSO Drawing.
Erectionof 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts
Supply of various types of Galvanized traction bonds 40x6 mm.
Erection of various types of Galvanized traction bonds 40x6 mm.
Supply of single earth electrode.
Erection of single earth electrode.
Transportation,Trenching and Laying of LT/HT various size of PVC/XLPE cables along the Railway track.
Supply of RCC truncking with cover
Erection of RCC truncking with cover
Supply of cast iron cable marker as per drawing.
Erection of cast iron cable marker as per drawing.
Supply of 150 mm size RCC hume pipe along with collar/coupler etc.
Laying of 150 mm size RCC hume pipe along with collar/coupler etc.
Supply of junction box assembly for 25 KVA AT Supply as per drawing.
Erection of junction box assembly for 25 KVA AT Supply as per drawing.
Supply of termination box assembly for 25 KVA AT Supply as per drawing.
Erection of termination box assembly for 25 KVA AT Supply as per drawing.
Supply of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification or latest.
Erection, testing & commissioning of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification or latest.
Making of Horizontal Boring to track formation below 2 mtrs from formation level suitable for inserting of 200 mm dia HDPE DWC pipe.
Dismantling of 25 KVA AT complete with DO fuse, jumpers etc excluding structure.
Supply of 2 corex150sq.mm XLPE Armored Aluminium conductor cable,working voltage upto 1100volt
2A-Work 2 : Electrical TRD portion work involve in Construction of long
Supply of fabricated / roled galvanised traction masts, portals, TTC.
Erection of traction masts, Portal & TTC Boom by Road crane/ Rail crane in PB.
Erection of traction masts, Portal & TTC Boom by Road crane/ Rail crane in NPB.
Supply of fabricated galvanised of small parts of steel (SPS).
Erection of fabricated galvanised of small parts of steel (SPS). in PB.
Erection of fabricated galvanised of small parts of steel (SPS). in NPB.
2B-Work 2 : Electrical TRD portion work involve in Construction of long
Preparation of designs & drawings for overhead equipment
Supply Guy rod assembly including SPS
Erection of Guy rod assembly including SPS in PB.
Erection of Guy rod assembly including SPS in NPB.
Transporation & erection of 193/150 Sq mm copper contact wire
Transporation & erection of 125 Sq mm copper catenary wire
Supply of dropper and dropper adjustment for contact wire 193/150 Sqmm and catenary wire 125 Sqmm
Erection of of dropper and dropper adjustment for contact wire 193/150 Sqmm and catenary wire 125 Sqmm
Supply of standard bracket assembly suitable for 125/65 sq mm catenary wire and 193/107/150 sq mm contact wire . It includes load transfer ofstandrad bracket from existing bracketassembly.
Erection of standard bracket assembly suitablefor 125 sq mm catenary wire and 193 sq mmcontact wire . It includes load transfer ofstandrad bracket from existing bracketassembly. (In
Supply of Regulating equipment 5 pulley block type with counter weight
Erection of Regulating equipment 5 pulley block type with counter weight. (in
Supply of materials for termination of Double Overhead equipment conductor including insulator.
Erection of materials for termination of Double Overhead equipment conductor including insulator in PB.
Erection of materials for termination of Double Overhead equipment conductor including insulator in NPB.
Supply OHE termination assembly including porcelain 9-tonne insulators.( for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm)
Erection OHE termination assembly including porcelain 9-tonne insulators.(For BWA, FTA,FA, ACA) (in PB/NPB)
Supply of Anticreep arrangement with 125/65 Sq. mm catenary wire for conventional type OHE.(Catenary wire will be supplied by Rly.)
Erection of Anticreep arrangement with 125/65 Sq. mm catenary wire for conventional type OHE in PB.
Erection of Anticreep arrangement with 125/65 Sq. mm catenary wire for conventional type OHE in NPB.
Supply of Solid core cut-in insulator with component for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm.
Erection of Solid core cut-in insulator with component for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm in PB.
Erection of Solid core cut-in insulator with component for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm in NPB.
Supply of Solid core suspension insulator with component for wire of 125/65/150 Sqmm.
Erection of Solid core suspension insulator with component for wire of 125/65/150 Sqmm. in PB.
Erection of Solid core suspension insulator with component for wire of 125/65/150 Sqmm. in NPB.
Supply of 25 KV solid core Post insulator with component.
Erection of 25 KV solid core Post insulator with component in PB.
Erection of 25 KV solid core Post insulator with component in NPB.
Supply of 25 KV Single Pole Isolator complete Assembly including operating rod & post insulator with mounting base.
Erection of 25 KV Single Pole Isolator complete Assembly including operating rod & post insulator with mounting base in PB.
Erection of 25 KV Single Pole Isolator complete Assembly including operating rod & post insulator with mounting base in NPB.
Supply of Section Insulator assembly including insulator for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm in PB.
Erection of Section Insulator assembly including insulator for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm in PB.
Erection of Conventional type Section Insulator assembly including insulator for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm in NPB.
Supply of galvanized nut-bolt washer(plain and spring type) of size 16 x 50mm with check nut etc
Erection of galvanized nut-bolt washer(plain and spring type) of size 16 x 50mm with check nut etc
Supply of Galvanised MS Flat 40x6 mm confirming to IS:2062/2011 or latest Grade Designation.
Erection of Galvanised MS Flat 40x6 mm
Splicing and extension of an anchored OHE including supply of contact & catenary splice for contact wire 193/107/150 Sqmm and catenary wire 125/65 Sqmm.
Dismantling of OHE including SPS, DA, cantilever etc but without structures in PB.
Dismantling of OHE including SPS, DA, cantilever etc but without structures in NPB
Dismantling of Portal / TTC uprights & mast by cutting.(in PB/NPB)
Dismantling of OHE portal booms / TTC boom including SPS. (In PB/NPB)
Dismentalling of Regulating equipment with counter weight assembly in PB
Dismentalling of Regulating equipment with counter weight assembly in NPB
Dismantling of termination.(in PB/NPB)
Dismantling of bracket assembly.(in PB/NPB)
Dismantling of Guy Rod assembly.(in PB/NPB)
Dismantling of anticreep arrangement.(in PB/NPB)
Dismantling of Section insulator Assembly.(in PB/NPB)
Dismantling of Isolator including earth contact.(in PB/NPB)
Dismantling of DA assembly Under PB/NPB.
Dismantalling & re-erection of Number Plate. (in PB/NPB)
Dismantalling of various types of bonds.(in PB/NPB)
Supply of Caution Board.
Erection of Caution Board.
Supply of retro-reflective Number Plate including hardware.
Erection of retro-reflective Number Plate including hardware.
Breaking of foundation.
Supply & erection of Sectioning / Station Working Rule Diagram.
Supply of Danger board.
Erection of Danger board.
Supply of Key Box for Station.
Supply of single earth electrode
Erection of single earth electrode
Supply for Extra for special embedment of earth electrode.
Erection for Extra for special embedment ofearth electrode.
Erection of any type jumper assembly such as "G"jumper, AT jumper, Isolator jumper etc. in NPB
Erection of any type jumper assembly such as "G"jumper, AT jumper, Isolator jumper etc. in PB
Supply of Copper jumper wire(160 sq mm)
Supply of 193-129/105/150/160(FM -15 PG) clamp.
Supply of PG clamp 125/160 sq mm
Erection of PG clamp 125/160 sq mm
Supply of P.G.Clamp (1030-2) complete assembly
Supply of P.G.Clamp (1030-3) complete assembly
Supply of P.G.Clamp (1051-3) complete assembly
2C-Work 2 : Electrical TRD portion work involve in Construction of long
Cement concrete forfoundation & plinth inother than hard soil &rock. (Foundation shouldbe M-15 type as per IS-456, i.e ratio 1:2:4,cement quantity perCu.M. of foundation =6.5 bags of 50 Kg each)
Cement concrete forfoundation & plinth inhard soil & rock.(Foundation should be M- 15 type as per IS-456,i.e ratio 1:2:4, cementquantity per Cu.M. offoundation = 6.5 bags of50 Kg each)
2D-Work 2 : Electrical TRD portion work involve in Construction of long
Preparation of design & dwaring for overhead equipment.
Cement concrete for foundation & Plinth:- In other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i,e ratio 1:2:4).
Supply of galvanized steel for structure.
Erection of galvanized steel for structure.
Supply of galvanized small parts steel (SPS).
Erection of galvanized small parts steel (SPS).
Supply of Copper jumper wire (50 sq mm).
Supply of P.G.Clamp (1040-2) complete assembly.
Erection of any type jumper assembly such as "G"jumper, AT jumper, Isolator jumper etc. in PB
Supply of solid core suspension insulator assembly for AT supply.
Erection of solid core suspension insulator assembly for AT supply.
Supply of 25 KV DO fuse switch assembly including insulators.
Erection of 25 KV DO fuse switch assembly including insulators.
Supply of 25 KV/240 V, 25 KVA AT complete assembly as per RDSO specification.
Erection of 25 KV/240 V, 25 KVA AT complete assembly as per RDSO specification.
Supply of LV box assembly for 25 KVA auxiliary transformer as per drawing.
Erection of LV box assembly for 25 KVA auxiliary transformer as per drawing.
Supply of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware.
Laying of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware.
Supply of anticlimbing device with GI barbed wire etc, for AT mast.
Erection of anticlimbing device with GI barbed wire etc, for AT mast.
Supply of Retro reflective type Location number plates.
Erection of Retro reflective type Location number plates including clamps & nut bolts
Supply of 25 KV Caution Board in electrified area as per RDSO Drawing.
Erectionof 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts
Supply of various types of Galvanized traction bonds 40x6 mm.
Erection of various types of Galvanized traction bonds 40x6 mm.
Supply of single earth electrode.
Erection of single earth electrode.
Transportation,Trenching and Laying of LT/HT various size of PVC/XLPE cables along the Railway track.
Supply of RCC truncking with cover
Erection of RCC truncking with cover
Supply of cast iron cable marker as per drawing.
Erection of cast iron cable marker as per drawing.
Supply of 150 mm size RCC hume pipe along with collar/coupler etc.
Laying of 150 mm size RCC hume pipe along with collar/coupler etc.
Supply of junction box assembly for 25 KVA AT Supply as per drawing.
Erection of junction box assembly for 25 KVA AT Supply as per drawing.
Supply of termination box assembly for 25 KVA AT Supply as per drawing.
Erection of termination box assembly for 25 KVA AT Supply as per drawing.
Supply of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification or latest.
Erection, testing & commissioning of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification or latest.
Making of Horizontal Boring to track formation below 2 mtrs from formation level suitable for inserting of 200 mm dia HDPE DWC pipe.
Dismantling of 25 KVA AT complete with DO fuse, jumpers etc excluding structure.
Supply of 2 corex150sq.mm XLPE Armored Aluminium conductor cable,working voltage upto 1100volt
3A-Work 3 : Electrical TRD portion work in construction of extended loop
Preparation of designs & drawings for overhead equipment
Supply of fabricated / roled galvanised traction masts, portals, TTC.
Erection of traction masts, Portal & TTC Boom by Road crane/ Rail crane in PB.
Erection of traction masts, Portal & TTC Boom by Road crane/ Rail crane in NPB.
Supply of fabricated galvanised of small parts of steel (SPS).
Erection of fabricated galvanised of small parts of steel (SPS). in PB.
Erection of fabricated galvanised of small parts of steel (SPS). in NPB.
Supply Guy rod assembly including SPS
Erection of Guy rod assembly including SPS in PB.
Erection of Guy rod assembly including SPS in NPB.
Supply of conventional type single bracket assembly including Insulators and SPS.
Erection of conventional type single bracket assembly including Insulators and SPS in PB.
Erection of conventional type single bracket assembly including Insulators and SPS in NPB.
Erection of 130 sq.mm large Span Wire (in PB).
Erection of 130 sq.mm large Span Wire (in NPB).
Supply of conventional type OHE along with supply of dropper wire, dropper clips & components (Contact & catenary wire will be supply at Pune Railway Depot)
Erection of conventional type OHE along with dropper wire, dropper clips and components (in PB)
Manual erection of conventional type OHE along with all required components including supply of dropper wire (in NPB)
Supply of 3 pulley type Regulating equipment with counter weight assembly & SPs for conventional type OHE.
Erection of 3 pulley type Regulating equipment with counter weight assembly & SPs for conventional type OHE in PB.
Erection of 3 pulley type Regulating equipment with counter weight assembly & SPs for conventional type OHE in NPB.
Supply of materials for termination of Double Overhead equipment conductor including insulator.
Erection of materials for termination of Double Overhead equipment conductor including insulator in PB.
Erection of materials for termination of Double Overhead equipment conductor including insulator in NPB.
Supply of Anticreep arrangement with 65 Sq. mm catenary wire for conventional type OHE.(Catenary wire will be supplied by Rly.)
Erection of Anticreep arrangement with 65 Sq. mm catenary wire for conventional type OHE in PB.
Erection of Anticreep arrangement with 65 Sq. mm catenary wire for conventional type OHE in NPB.
Supply of Solid core cut-in insulator with component.
Erection of Solid core cut-in insulator with component in PB.
Erection of Solid core cut-in insulator with component in NPB.
Supply of Solid core suspension insulator with component.
Erection of Solid core suspension insulator with component in PB.
Erection of Solid core suspension insulator with component in NPB.
Supply of 25 KV solid core Post insulator with component.
Erection of 25 KV solid core Post insulator with component in PB.
Erection of 25 KV solid core Post insulator with component in NPB.
Supply of Conventional type Section Insulator assembly including insulator in PB.
Erection of Conventional type Section Insulator assembly including insulator in PB.
Erection of Conventional type Section Insulator assembly including insulator in NPB.
Supply of 25 KV Single Pole Isolator complete Assembly including operating rod & post insulator with mounting base.
Erection of 25 KV Single Pole Isolator complete Assembly including operating rod & post insulator with mounting base in PB.
Erection of 25 KV Single Pole Isolator complete Assembly including operating rod & post insulator with mounting base in NPB.
Supply of galvanized nut-bolt washer(plain and spring type) of size 16 x 50mm with check nut etc
Erection of galvanized nut-bolt washer(plain and spring type) of size 16 x 50mm with check nut etc
Supply of Galvanised MS Flat 40x6 mm confirming to IS:2062/2011 or latest Grade Designation.
Erection of Galvanised MS Flat 40x6 mm
Dismantling of OHE including SPS, DA, cantilever etc but without structures in PB.
Dismantling of OHE including SPS, DA, cantilever etc but without structures in NPB
Dismantling of Portal / TTC uprights & mast by cutting.
Dismantling of OHE portal booms / TTC boom including SPS.
Splicing and extension of an anchored OHE including supply of contact & catenary splice.
Dismantling of Regulating equipment with counter weight assembly in PB
Dismantling of Regulating equipment with counter weight assembly in NPB
Dismantling of termination assembly.(in PB/NPB)
Dismantling of bracket assembly.(in PB/NPB)
Dismantling of Guy Rod assembly.(in PB/NPB)
Dismantling of anticreep arrangement.(in PB/NPB)
Dismantling of Section insulator Assembly.(in PB/NPB)
Dismantling of Isolator including earth contact.(in PB/NPB)
Dismantling of 25KV Post/Pin insulator.(in PB/NPB)
Supply of Caution Board.
Erection of Caution Board.
Supply of retro-reflective Number Plate including hardware.
Erection of retro-reflective Number Plate including hardware.
Dismantling & re-erection of Number Plate.
Dismantling of various types of bonds.
Breaking of foundation up to 200 mm below track formation.
Supply & erection of Sectioning / Station Working Rule Diagram.
Supply of Danger board.
Erection of Danger board.
Supply of GI pipe earthing complete with cement concrete earth chamber confirming to IS 3043 or latest.
Provision (Erection) of GI pipe earthing complete with cement concrete earth chamber confirming to IS 3043 or latest.
Supply of Key Box for Station.
Dismantling of DA assembly Under PB.
Supply of OHE height & stagger gauge for BG line (1676 mm)
Supply of dropper assembly (Conventional OHE).(Qty Unit "Each Span" should be read as "Span").
Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering.(Qty Unit"Each Span" should be read as "Span").
Erection of any type jumper assembly such as "G"jumper, AT jumper, Isolator jumper etc. in NPB
Erection of any type jumper assembly such as "G"jumper, AT jumper, Isolator jumper etc. in PB
Supply of Copper jumper wire(160 sq mm)
Supply of P.G.Clamp (1030-2) complete assembly
Supply of P.G.Clamp (1030-3) complete assembly
Supply of P.G.Clamp (1050-3) complete assembly
Supply of P.G.Clamp (1040-2) complete assembly as per RDSO's Drg No.ETI/OHE/P/1040-2 Rev- E or latest
Supply of Bi-metallic Parallel Clamp Part (15/20)(1561)
"TERMINAL CONNECTOR 19 MM MULTIPLE HOLE (Bolted Type) with nut bolt , spring washer & flat washer"
Supply of Packing Saddle part no. RI no. 1174 as per RDSO Drg no. RE/33/P/1174 mod-B or latest and RDSO spec: TI/SPC/OHE/Fitting/0130(10/13), Rivision 1
Supply of Half hard copper Saddle for RRA Clamp
Supply of Feeder wire ending clamp (150)
Supply of Large Span Wire Ending Clamp (130) Complete Assembly
Supply of DRILL BIT FOR BATTERY OPERATED RAIL DRILL MACHINE
Supply of Battery operated Cordless chain saw Tree Cutting machine.
Painting of OHE structure Numbers.
Engaging mechanical excavators like JCB or other machineries such as Hydra etc for levelling the formation, dismantling any infringing structures, clearing and removing debris etc., with all leads and lifts etc.,complete and as per the instruction of Railwayr epresentative at site.
Providing Road breaker/Concrete Breaker with compressor and jack hammer for 95 railway work such as cutting and dismantling of road concrete/ Bricks pucca structure (RCC/Steel section) including contractor's fuel, driver andall other charges completed as directed by Engg in charge.
Portable Inflatable Tower lighting system with generator and inflatable balloon + Tower cloth special fabric cylindrical shape.
Trimming and cutting of tree branches.
3B- Work 3 : Electrical TRD portion work in construction of extended
Cement concrete forfoundation & plinth inother than hard soil &rock. (Foundation shouldbe M-15 type as per IS-456, i.e ratio 1:2:4,cement quantity perCu.M. of foundation =6.5 bags of 50 Kg each)
Cement concrete forfoundation & plinth inhard soil & rock.(Foundation should be M- 15 type as per IS-456,i.e ratio 1:2:4, cementquantity per Cu.M. offoundation = 6.5 bags of 50 Kg each)
3C-Work 3 : Electrical TRD portion work in construction of extended loop
Preparation of design & dwaring for overhead equipment.
Cement concrete forfoundation & plinth inother than hard soil &rock. (Foundation shouldbe M-15 type as per IS-456, i.e ratio 1:2:4,cement quantity perCu.M. of foundation =6.5 bags of 50 Kg each)
Supply of fabricated / roled galvanised traction masts, portals, TTC.
Erection of traction masts, Portal & TTC Boom by Road crane/ Rail crane in PB.
Supply of fabricated galvanised of small parts of steel (SPS).
Erection of fabricated galvanised of small parts of steel (SPS). in PB.
Supply of Copper jumper wire (50 sq mm).
Supply of P.G.Clamp (1040-2) complete assembly.
Erection of any type jumper assembly such as "G" jumper, AT jumper, Isolator jumper etc.
Supply of solid core suspension insulator assembly for AT supply.
Erection of solid core suspension insulator assembly for AT supply.
Supply of 25 KV DO fuse switch assembly including insulators.
Erection of 25 KV DO fuse switch assembly including insulators.
Supply of 25 KV/240 V, 25 KVA AT complete assembly as per RDSO specification.
Erection of 25 KV/240 V, 25 KVA AT complete assembly as per RDSO specification.
Supply of LV box assembly for 25 KVA auxiliary transformer as per drawing.
Erection of LV box assembly for 25 KVA auxiliary transformer as per drawing.
Supply of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware.
Laying of 100 mm dia. (OD) 'A' class GI pipe with GI flat clamp & required hardware.
Supply of anticlimbing device with GI barbed wire etc, for AT mast.
Erection of anticlimbing device with GI barbed wire etc, for AT mast.
Supply of Retro reflective type Location number plates.
Erection of Retro reflective type Location number plates including clamps & nut bolts
Supply of 25 KV Caution Board in electrified area as per RDSO Drawing.
Erectionof 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts
Supply of various types of Galvanized traction bonds 40x6 mm.
Erection of various types of Galvanized traction bonds 40x6 mm.
Supply of single earth electrode.
Erection of single earth electrode.
Transportation,Trenching and Laying of LT/HT various size of PVC/XLPE cables along the Railway track.
Supply of RCC truncking with cover
Erection of RCC truncking with cover
Supply of cast iron cable marker as per drawing.
Erection of cast iron cable marker as per drawing.
Supply of 150 mm size RCC hume pipe along with collar/coupler etc.
Laying of 150 mm size RCC hume pipe along with collar/coupler etc.
Supply of junction box assembly for 25 KVA AT Supply as per drawing.
Erection of junction box assembly for 25 KVA AT Supply as per drawing.
Supply of termination box assembly for 25 KVA AT Supply as per drawing.
Erection of termination box assembly for 25 KVA AT Supply as per drawing.
Supply of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification or latest.
Erection, testing & commissioning of Control & distribution Panel with Auto change over switch, 155 Amp capacity (3 source type) for CLS supply, suitable for 25 KVA 'AT', as per RDSO specification or latest.
Making of Horizontal Boring to track formation below 2 mtrs from formation level suitable for inserting of 200 mm dia HDPE DWC pipe.
Dismantling of 25 KVA AT complete with DO fuse, jumpers etc excluding structure.
Supply of 2 corex150sq.mm XLPE Armored Aluminium conductor cable,working voltage upto 1100volt
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .