PERIODICAL SERVICES OF WATER SUPPLY INSTALATION UNDER ZONE- I OF GE JAIPUR AT JAIPUR MIL STN

Amount

M&L for Preparation of old plastered surfaces of wall, washing & rubbing down, stopping of distempered & painted surfaces, removing nail, making good hole cracks etc, work in patches, repair with putty & applying two coats of white wash with Brush etc, complete all as specified and directed.

M&L for Preparation of old plastered surfaces of Ceiling, washing & rubbing down ,stopping of distempered & painted surfaces, removing nail, making good hole cracks etc, work in patches, repair with putty & applying two coats of white wash with Brush complete all as specified.

M&L for complete removal of existing surface & preparation of old plastered surfaces of wall, washing & rubbing down, stopping of distempered & painted surfaces, removing nail, making good hole cracks etc with, work in patches, repair with putty & applying two coats of cement base paint with Brush etc, complete all as specified and directed.

M&L for preparation of old steel painted surface and applying one coat of synthetic enamel paint etc, complete all as specified and directed.

M&L for Preparation of old plastered surfaces of wall, washing & rubbing down, stopping of distempered & painted surfaces, removing nail, making good hole cracks etc, work in patches, repair with putty & applying two coats of distemper oil emulsion over & including a coats of wall care putty with hand roller complete all as specified.

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified and as directed by Engineer-in-Charge.

M&L for thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work ,preparation of existing surface with wall care putty on platered surface and two coat of weather proof exterior emulsion paint (weather coat smooth) using hand roller on external wall Surface of bldgs including complete removal of existing treatment etc, complete all as specified and as directed by Engineer-in-Charge.

M&L for thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work ,preparation of existing surface with wall care putty on platered surface and two coat of weather proof exterior emulsion paint (weather coat smooth) using hand roller on external wall Surface of OVER HEAD TANK upto 25 meter hieght from GL including complete removal of existing treatment etc, complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pin/spring/ clip etc, complete all as specified and as directed

S & F in repair 3mm thick plain sheet glass ordinary quality and glazing with oil putty and fixing of glazing pin with metal frame in sqaures not exc 0.5 sqm in each pane etc, complete all as specified and as directed

Taking down cement plaster or cement lime plaster on brick / stone surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc, complete all as specified and as directed

M&L for chipping the RCC surface and cleaning the rusted reinforcement and exposed surface by wire brush, mechanical device or any other established method and applying the rust removing solution of approved make and quality with cotton swab to reinforcement and allowing to dry the same for 24 hrs ,brushing of loose particles and applying 1st coat of rust preventive coating of polymer and cement slurry in 1:1.5 proportion with soft brush without adding water including applying another coat of rust preventing after 4 hrs allowing air curing for 48 hrs etc, complete all as specified and directed. (Note: Scoffolding/staiging shall be includede in quoted rate)

M & L for 30mm thick polymer mortar to load carrying RCC members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement and quartz sand with required WC ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufacturer specification etc. for OVER HEAD TANK upto 25 meter hieght from GL including all necessary arrangement complete all as specified and as directed by Engineer-in-Charge.

M & L for 15mm thick polymer mortar to load carrying RCC members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement and quartz sand with required WC ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufacturer specification etc for OVER HEAD TANK upto 25 meter hieght from GL including all necessary arrangement complete all as specified and as directed by Engineer-in-Charge.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfacel in CM 1:4 finished even and smooth without using extra cement etc, complete all as specified and directed.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work or on one side of lathing in CM 1:6 finished even and smooth without using extra cement etc, complete all as specified and directed.

M & L for rendering 15 mm thick on stone masonary surface or surface other than fair faces of brick work in CM 1:4 finished even and smooth without using extra cement etc, complete all as specified and directed.

M & L rendering 10mm thick on brick work or concrete surfaces in ceiling in CM 1:3 finished finished even and smooth without using extra cement etc, complete all as specified and directed.

M & L rendering 10mm thick on dubbing out surfaces on ceiling in CM (1:3) as floating/ setting coat in patches not exc 3 sqm each patch etc, complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling etc, complete all as specified and directed.

M & L for preparation of new plastered wall surfaces and applying two coats of cement base paint on wall etc, complete all as specified and directed.

M & L for preparation of new plastered wall surfaces and applying two coat of oil bound distemper of any tint including priming plastered surfaces with alkali resistant priming paint etc, complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25mm thick, size 450 x 450 mm over and including cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc, complete all as specified and directed.

M & L for diamond polishing of kota/Marble flooring including jointed with grey cement slurry mixed with pigment to match the shade of the slab etc, complete all as specified and directed.

S&F Sign board made out of 03mm aluminum composite panel both side alongwith retro reflective sheeting on both side with letters, stops, commas, short lines, dashes, hyphen, brackets etc of 100-150mm size fixed on 75mm dia SS grade 304 Pipe of 3 mtr long vertical pipe and frame of composite panel made with 60 mm dia ss Grade 304 pipe rectangular pipe complete all as specified and directed. Note: Area of sign board shall be measured for payment

PUSHPA G ENTERPRISES