REPAIR TO FENCING COMPOUND WALL, PATHWAY, RETAINING WALL AT SE FALLS UNDER GE SHILLONG

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion, embedded in concrete and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Supply only chain link mild steel galvanised fencing of mesh size 75mm x 75mm (design of mesh shall be approved by GE) made of GI wire not less than 3 mm dia including line wires, to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed

Fixing only chain link mild steel galvanised fencing of any mesh and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed

S&F in repair galvanised two strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed (each line wire to be measured).

S&F 10 mm dia MS round bars of any length as in stiffener to chain link fencing fixed to fencing post complete all as specified and directed .

Excavation in post holes not exc. 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soft/loose soil.

M&L for PCC (1:3:6), type C1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete including all necessary form work complete all as specified and directed.

S&F mild steel angle iron or other sections for post and struts in fencing, flat iron fillets (for securing wire mesh etc) to fencing post, cut to shape, drilled and countersunk for screw, including cutting tops to shape as directed, drilling holes, notching for wire, embedding in concrete and screwing etc. conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F MS screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm and n. exc 10 cm long, diameter of neck 5 to 10 mm complete all as specified and directed.

S&F MS screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 15 cm and n. exc 22.5 cm long, diameter of neck 12 mm complete all as specified and directed.

M&L for framed work such as grills gratings etc with ends of bars shouldered and/or riveted or forged into spikes framed for water tank and other similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed

S&F framed work as in doors or gates of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) all as specified and as directed

M&L for roof truss ( framed), trussed , purlin etc. of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) .

M&L for prepration of new steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide/ zinc chrome primer complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

Excavation in trenches not exc 1.5m wide and not exc 1.50 in depth for column & wall Cum foundation and getting out in soft/loose soil.

Removing , excavated soil material exc 1.5Km and n.exc 5 KM deposited where directed at Cum a level n.exc 1.5,m from the starting point.

Returning filling in, including spreading, leveling, watering and well ramming in layers not Cum exc 250mm in soft/loose soil, completed all as specified and as directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete

M&L for precast cement concrete (1:3:6) type C1 (using 20mm graded agg) solid block masonry exc 10cm in width or girth and setting in CM (1:6) complete all as specified and directed.

M&L for precast cement concrete (1:3:6) type C1 (Using 20mm graded agg) solid building blocks or slabs 10cm thick (with plain or interlocking joints) setting in CM 1:4 complete all as specified and directed.

Demolition of PCC (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for PCC type B2 (1:2:4) (Using 40mm graded stone aggregate) in surface channels and drains etc. finishing surface even and smooth without using extra cement including form work complete.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M & L PCC 1:4:8 type C2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete.

Demolition of brickwork or stone/boulder masonry, precast cement concrete block walling in any position, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for walling random rubble uncoursed well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and directed.

All as per item no. 35 above but except stone using serviceables stones complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto courses in hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc. 40 mm of lime or sand stone complete all as specified and directed

M&L for precast cement concrete type C1 ( 1:3:6, using 20mm graded crushed stone aggregates) as in bond stones set in cement mortar 1:4 complete all as specified and as directed.

M&L for raised pointing to random rubble masonary uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in parapets, coping, benching, appex stone etc water trough and the like including weathering slightly rounding or chamferred angle and throating etc including necessary formwork complete as specified and directed.

Demolition of PCC (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in hard standing finished even and fair laid in alterrnate bays of size not exc 2 m X 2m with construction joints and filled with joint sealing compound complete all as specified and directed.

M & L PCC 1:4:8 type D2 75 mm thick (using 40mm graded aggregate) as in sub base concrete complete all as specified and directed.

M&L Machine pressed precast concrete polished interlocking paver block any shape and size of approved design confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.

M&L of sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs, shelves and similar articles set in CM (1:6) including necessary form work complete all as specified and directed.

M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Supply only for water proofing compound.

M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two finishing coat of acrylic emulsion paint, anti fungal resistance, dirt resistance exterior paint of required shade including over a coat of alkali resistant primer over a coat of 1mm wall care putty complete all as specified and directed.

M&L for complete removal of existing old treament on wall and applying two coats of exterrior emulsion paint (Weather coat) over a coat of alkali resistant primer over a coat of 1mm wall care putty complete all as specified and directed.

Please Enable Macros to View BoQ information