Premghat Chowk to Bye pass road Rahighat RD 0 0 to RD 2200 and C O 44 Nos. Manhole chamber.

Amount

Excavation in foundation, trenches,etc. in earth work in all kinds of soil such as pick work, jumper work,blasting work, hard blasting and chiselling etc. stacking the excavated soil not more than 3 mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinths sides of foundations etc.then disposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts.complete in all respect and to the entire satisfaction of the Engineer-in-charge.

Prov. and laying cement concrete 1:4:8(1cement: 4sand: 8 graded stone agg. 40mm nominal size) and curing complete excluding cost of form work i/c all leads and lifts. a) Foundation and plinth.

Prov. and laying cement concrete work 1:1 1/2: 3(1cement:1 1/2 sand:3 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work i/c all leads and lifts complete in all respect.:-a) Foundation and plinth.

b) Walls (any thickness) but not less than 0.1 m thickness)attached pillasters,buttresses, plinth and string courses etc.from top of foundation level upto floor two level.

c)Suspended floors, roofs, landings,shelves and their supports balconies, beams, girders, bressumers and cantilevers upto floor two level.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting , strutting and propping etc. with wooden, battens, and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs.and removal of the same for insitu reinforced concrete and plain concrete work including all leads and lifts in:-

a)Vertical surfaces such as soffits of suspended floors,roofs,landings and the like including attached pillasters,buttresses, plinth and string courses and the like.

b) Flat surfaces such as soffits of suspended floors,roofs, landings, and the like:-i)Floors etc. upto 200mm in thickness.

Prov. Mild steel/Tor steel reinforced for RCC work including bending, binding and placing in position complete upto floor two level i/c all leads and lifts complete in all respect. :- a) Tor steel.

Fixing of SFRC main hole from and cover confirming to ISI 12952 latest with up todate amondment of folwing dia & class- 500 mm dia 35 EHD (Frame cast iron & cover (SFRC) including carriage of materials i/c all leads and lifts complete in all respect

DI Fitting duly ISI marked as per IS 9523-2000(K-12)(PN-10)

a) All socket Y Tee 150x199mm

b) DI Plug 150mm

c) DI Plug 100mm

EPDM rubber gaskit as per IS 5382/1952 TYTON RING TYPE

a) Rubber gasket 150mm

Laying / jointing & Testing in Ductile Iron pipe for house hold connection including fitting complete as per entire satisfaction of the Engineer-in-Charge.(earth work in trenches to be measured and paid for separately) .

AMIT KUMAR