CAMC of firefighting system

Amount

PART - A (Consisting of manpower for 24x7x365 hours pump operation and scope of work for CAMC) Quote rates for following Items excluding GST@18% only

Semi Skilled Technician salaries:- Wages to be paid for 04 No's Semi Skilled Technicians for 26 days in round the clock operation (04 No's X 12 Months 48) of pumps valves and also initial assistance in defect rectification subjected to fire fighting equipments.

CMC For Diesel Pump Unit Diesel engine driven centrifugal Horizontal split case fire fighting diesel engine pump set having capacity of 2283 LPM at 88m head along with all accessories with Cl casing, standard fitting, bronze impeller, Stainless Steel shaft mechanical seal with water cooled heat exchanger diesel engine, having speed of 1800 rpm.CMC Including cleaning of strainar, replacement of gaskets, flexible connectors,vibration pads if required, Greasing at greasing points, replacement of seals and arrest any leaks from fittings and makin operational for 24X7 operation in all respect Replacement of faulty pressure gauges Vibration Pads when required Any other minor repairs in all respects to make the equipment operationally available 24X7 Maintenance of all associated pipelines for painting conosion Rubber Joint replacements, arresting of any type of leaks is also included. Make: Wilo, Flow (LPM) :2283, Head (Mtr) : 80, KW :62.56 , RPM : 1800 CMC for ENGINE Unit of Diesel Engine Driven Pump (Quantity - 01 No's) :- Fuel pipe laid from diesel tank upto engine,Exhaust piping cladding with 12 mm super ceramic fiber rope including fittings, clamps steel support bends and canopy at termination point of suitable dia for the engine as per manufacturers instruction shall be included. Supply of the charge of lubricants, fuel, distilled water for battery and other consumables related to Diesel Engine shall be included.CMC including Repair/Replacement of batteries, Strating Motor Dynamo, Air & Lub Oil Filters, replacement of rubber hose/bellows, Exhaust bellows, Silencer, Belts, Jubliee Clips.Any other minor repairs in all respects to make the equipment operationally available 24X7 Maintenance of all associated pipelines for painting, corrosion, Rubber Joint replacements, arresting of any type of leaks is also included. Note:- CMC to be undertaken by authorised/OEM of the Engine. ENGINE Model - 3G11T, Make - Greaves Cotton Ltd, 6R1080T,RATING KW 62.56 kw,RPM 1800,Engine Sl NO- 1208031906844,BATTRIES MAKE EXIDE CARE BATTRIES QTY -01 NOS

CMC For Jockey Sprinkler Motor Driven Pump Motor driven Centrifugal End suction top discharge Jockey pump set for fire fighting system of capacity of 180 LPM at 80m head along with all accessories, mechanical seal, Cl casing, Stainless Steel shaft, standard fittings, bronze impeller, electrical driven suitably rated squirrel cage induction motor with synchronous speed not exceeding 2900 rpm with Class-F insulation, IP-55 to operate at 415 V+/- 10% 50 Hz+/- 3% 3 phase AC Supply, including supplying MS common base plate.C CMC Including cleaning of strainers, replacement of gaskets,flexible connectors, vibration pads if required, Greasing at greasing points,replacement of seals and arrest any leaks from fittings and make operational for 24X7 operation in all respect. Replacement of faulty pressure gauges, Vibration Pads when required.Any other minor repairs in all respects to make the equipment operationally available 24X7 Maintenance of all associated pipelines for painting, corrosion, Rubber Joint replacements, arresting of any type of leaks is also included. Make:Wilo, Flow (LPM) :180 , Head (Mtr) : 80, kw :4 , RPM : 2900, Frequency : 50 HZ, Phase : 3

CMC For Main Sprinkler Motor Driven Centrifugal Pump Motor driven Centrifugal Horizontal,split case Fire fighting pump set along with all accessories capacity of 2283 LPM at 80m head with Cl casing, mechanical seal standard fittings, Stainless Steel shaft, bronze impeller, suitably rated electrical driven squirrel cage induction motor running at 2900 rpm (synchronous speed) with insulation, IP-55, suitable to operate 415 V +/- 10% 50 Hz +/- 3%, 3 phase AC supply, including supplying MS common base plate frame and foundation bolts, anti vibration pads complete with coupling guard & all other accessories etc. CMC Including cleaning of strainers,replacement of gaskets, vibration pads if required, Greasing at greasing points, replacement of seals and arrest any leaks from fittings and make operational for 24X7 operation in all respect. Replacement of faulty pressure gauges, Vibration Pads when required Maintenance of all associated pipelines for painting, corrosion, Rubber Joint replacements, arresting of any type of leaks is also included. Make:Wilo, Flow (LPM) : 2283 Head (Mtr) :80 , Kw :55 , RPM : 2900, Frequency : 50 HZ, Phase : 3

CMC For Jockey Hydrant Motor Driven Pump Motor driven Centrifugal End suction top discharge Jockey pump set for fire fighting system of capacity of 180 LPM at 80m head along with all accessories, mechanical seal, Cl casing, Stainless Steel shaft, standard fittings, bronze impeller, electrical driven suitably rated squirrel cage induction motor with synchronous speed not exceeding 2900 rpm with Class-F insulation, IP-55 to operate at 415 V+/- 10% 50 Hz+/- 3% 3 phase AC Supply, including supplying MS common base plate.C CMC Including cleaning of strainers, replacement of gaskets, flexible connectors, vibration pads if required, Greasing at greasing points,replacement of seals and arrest any leaks from fittings and make operational for 24X7 operation in all respect. Replacement of faulty pressure gauges, Vibration Pads when required.Any other minor repairs in all respects to make the equipment operationally available 24X7 Maintenance of all associated pipelines for painting, corrosion, Rubber Joint replacements, arresting of any type of leaks is also included. Make:Wilo, Flow (LPM) :180 , Head (Mtr) : 80, kw :4 , RPM : 2900, Frequency : 50 HZ, Phase : 3

CMC For Main Hydrant Motor Driven Centrifugal Pump: Motor driven Centrifugal Horizontal,split case Fire fighting pump set along with all accessories capacity of 2283 LPM at 80m head with Cl casing, mechanical seal standard fittings, Stainless Steel shaft, bronze impeller, suitably rated electrical driven squirrel cage induction motor running at 2900 rpm (synchronous speed) with insulation, IP-55, suitable to operate 415 V +/- 10% 50 Hz +/- 3%, 3 phase AC supply, including supplying MS common base plate frame and foundation bolts, anti vibration pads complete with coupling guard & all other accessories etc. CMC Including cleaning of strainers,replacement of gaskets, flexible connectors,vibration pads if required, Greasing at greasing points, replacement of seals and arrest any leaks from fittings and make operational for 24X7 operation in all respect. Replacement of faulty pressure gauges, Vibration Pads when required Maintenance of all associated pipelines for painting, corrosion, Rubber Joint replacements, arresting of any type of leaks is also included. Make:Wilo, Flow (LPM) : 2283 Head (Mtr) :80 , Kw :55 , RPM : 2900, Frequency : 50 HZ, Phase : 3MB 50°C,BEARING DE/ NDE 6312-22/6212-2Z IEC 60034-1-E2, RPM 2950 A,52.00 DELTA THCL / RISE, F/B FRAME ND 200L CONN DIAG & DUTY,302 & S1 IP55,HALF KEY BALANCED REF RIAM 20024 H2 50±5%.

CMC For Boster Motor Driven Pump Motor driven centrifugal end suction pump top discharge set for fire fighting system of following capacities & head along with all accessories with Cl casing, Stainless Steel shaft, standard fittings, bronze impeller, love joy coupling to the electrical driven TEFC, squirrel cage induction motor suitably rated, with synchronous speed not exceeding 2930 rpm, class-F insulation, IP-55 rating, suitable to operate on 415 V+/- 10%, 50 Hz +/- 3%, 3 phase AC supply CMC Including cleaning of strainers,LP HP Switch, Butter Fly valves , flexible pipe connectors,pressure gauge with isolation ball valve , NRV, replacement of gaskets,flexible connectors,vibration pads if required, Greasing at greasing points, replacement of seals and arrest any leaks from fittings and make operational for 24X7 operation in all respect. Maintenance of all associated pipelines for painting, corrosion, Rubber Joint replacements, arresting of any type of leaks is also included.with Electric panel all accessorie. Make:Wilo, Flow (LPM) : 910 Head (Mtr) :38 , Kw :9.5 , RPM : 2930, Frequency : 50 HZ, Phase : 3

CMC For Boster Motor Driven Pump Motor driven centrifugal end suction pump top discharge set for fire fighting system of following capacities & head along with all accessories with Cl casing, Stainless Steel shaft, standard fittings, bronze impeller, love joy coupling to the electrical driven TEFC, squirrel cage induction motor suitably rated, with synchronous speed not exceeding 2930 rpm, class-F insulation, IP-55 rating, suitable to operate on 415 V+/- 10%, 50 Hz +/- 3%, 3 phase AC supply CMC Including cleaning of strainers,LP HP Switch, Butter Fly valves , flexible pipe connectors,pressure gauge with isolation ball valve , NRV, replacement of gaskets,flexible connectors,vibration pads if required, Greasing at greasing points, replacement of seals and arrest any leaks from fittings and make operational for 24X7 operation in all respect. Maintenance of all associated pipelines for painting, corrosion, Rubber Joint replacements, arresting of any type of leaks is also included with Electric panel all accessorie. Make:Wilo, Flow (LPM) : 450 Head (Mtr) :38 , Kw :9.5 , RPM : 2930, Frequency : 50 HZ, Phase : 3

CMC For Butterfly valve with necessary fittings, flanges, jointing, supports & painting etc. complete in all respects and as directed by E-I-C.

Size: 200mm Dia, Pressure Rating: 16Kg/cm2, Operation Type: Lever Type, Material of Construction: Cast Iron

Size: 150mm Dia, Pressure Rating: 16Kg/cm2, Operation Type: Lever Type, Material of Construction: Cast Iron

Size: 100mm Dia, Pressure Rating: 16Kg/cm2, Operation Type: Lever Type, Material of Construction: Cast Iron

Size: 80mm Dia, Pressure Rating: 16Kg/cm2, Operation Type: Lever Type, Material of Construction:Cast Iron

Size: 65mm Dia, Pressure Rating: 20Kg/cm2, Operation Type: Lever Type, Material of Construction: Gun Metal

Size: 50mm Dia, Pressure Rating: 20Kg/cm2, Operation Type: Lever Type, Material of Construction: Cast Iron

CMC For None return valve with necessary fittings, flanges, jointing, supports & painting etc. complete in all respects and as directed by E-I-C.

Non Return Valve, Size: 200mm dia

Non Return Valve, Size: 150mm dia

Non Return Valve, Size: 100mm dia

Non Return Valve, Size: 80mm dia

CMC For Y Strainer with necessary fittings, flanges, jointing, supports & painting etc. complete in all respects and as directed by E-I-C.

CMC For Pressure gauge with isolation ball valve And Syphon dial type (100 mm)

CMC For Air Cushion Tank with pressure gauge,ball valve , air vent etc.

CMC For Landing valve with necessary fittings, flanges, jointing, supports & painting etc. complete in all respects and as directed by E-I-C.

CMC For Flow Switch w with necessary fittings, flanges, jointing, supports & painting etc. complete in all respects and as directed by E-I-C.

CMC For Pendant Sprinkler (K115, 68 0C)

CMC For Upright Sprinkler (K80, 68 0C)

CMC For Electrical panel with all accessorie

CMC For 4 way Inlet Valve with NRV and butter fly Valve with necessary fittings, flanges, jointing, supports & painting etc. complete in all respects and as directed by E-I-C.

CMC For 3 way inlet valve with NRV and butter fly Valve with necessary fittings, flanges, jointing, supports & painting etc. complete in all respects and as directed by E-I-C.

CMC For 2way outlet valve with NRV and butter fly Valve with necessary fittings, flanges, jointing, supports & painting etc. complete in all respects and as directed by E-I-C.

CMC For Air release valve With ball valve & with necessary fittings, flanges, jointing, supports & painting etc. complete in all respects and as directed by E-I-C.

CMC For Alarm valve 150 mm with all accessories & necessary fittings, flanges, jointing, supports & painting etc. complete in all respects and as directed by E-I-C.

CAMC of Test assembly complete with test valve, sight glass sectional drain valve, union; necessary piping, threading, jointing & with corrosion resistant orifice all complete.

CMC For Gas Based Fire Suppression System with all accessories, CMC incldes refilling, removing and reinstalling of cylinder of NOVEC gas.

NOVEC-1230 Two Nos. of 120 ltr cylinder with 220.80kg gas with all accessories Location- SPECT CT

NOVEC-1230 one Nos. cylinder with 69.20 kg gas with all accessories Location- SPECT CT UPS Room

NOVEC-1230 one Nos. cylinder with 69.20 kg gas with all accessories Location- SPECT CT Battery Room

NOVEC-1230 one Nos. cylinder with 48 kg gas with all accessories Location- Server room

Gas suppression system including Addressable Fire Alarm with Repeater Panel System (Make: RAVEL) LA 1

Gas suppression system(make Ceasefire) including Addressable Fire Alarm with Repeater Panel System (Make: RAVEL) LA 2

Automatic tube fire suppression system with all accessories : Extinguishing media: Novac- 1230, Capacity- 5Kg, Qty-9 Nos Location- LT Room CMC includes refilling of extinguishing media/ NOVEC-1230

Charges for renewing fire NOC from local fire authority everyyear or whenever required(To get fire NOC is in the scope of vendor in all respect including laisioning, to show testing ofr fire fighting system to the authorities etc)

Supply, installation and testing of following one Time Supply Item. These items to be supplied and installed by the contractor as decided by the EIC. Constractors should quote rates including all the spares required for installation such as supports, screws, fittings etc in all respect.(After installation these items for the first year will be in warranty period and later on may be covered under CAMC)

One Time Supply for Branch pipe

One Time Supply for Sand Bucket

One Time Supply for Fireman Axe

One Time Supply for RRL Hose pipe

One Time Supply for Fire Extinduisher

CO2 Type

ABC powder Type

GST Shell be paid as applicable on Tendered value

PART - B(Quote rates for following spares excluding GST@18%) with necessary fittings, flanges, jointing, supports & painting etc complete in all respect) Note: The charges of spares are not considered for evaluating the L1 Bidder

Rate For Hose reel Drum with high Pressure Rubber tube and Jet spray Nozzel 20 mm diax 36 mtr long

Rate For FRP Canvas hose pipe 63 mm dia x 15 mtr

Rate For Branch pipe

Rate For FHC (internal hydrant), vendor has to mention separate rates for Glass size (1065*230)

Rate For FHC (External hydrant) vendor has to mention separate rates for Glass size (405*205)

Rate For Flexible sprinkler pipe 1200 mm length

Rate For Sand buckets

Rate For Refilling & testing of fire extinduisher

ABC powder Type 6kg

water type 9ltr

CO2 type 4.5kg

Rate For Refilling & testing of fire extinduisher

ABC powder Type 6kg

water type 9ltr

CO2 type 4.5kg

Pressure switch for fire fighting pumps

Orifice plate

Repair of under ground FF system pipe including digging, repair, welding, cuttting pressure testing etc(If larger piece of pipe needs to be replaced with new one then DSR rates/ market rates will be considered for the same and same will be paid to the vendor after measurement.

Supply and filling of gas for fire suppression system(NOVEC 1230/ any other exinguishing gas required for the system)

Supply and filling of gas for fire suppression system(HCFC gas required for the system)

Percentage increase on the value of CAMC for the 2nd year after completion of first year(While calculating CAMC cost for 2nd year, cost of sl no 27 ie one time supply items shall not be taken into consideration)

Percentage increase on the value of CAMC for the 3rd year after completion of 2nd year(While calculating CAMC cost for 3rd year, cost of sl no 27 ie one time supply items shall not be taken into consideration)

M/S SIBAM ENGINEERING PVT. LTD (BID ID -3114040)

sunil kumar pandey (BID ID -3112495)