Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-AOC H NO 831 1 HINDU NAGAR TILAKWADI BELGAUM 590006 | BELGAUM | BELGAUM | KARNATAKA | 590006 | L1 | Accepted-AOC Lowest quoted amount overall reasonable | |
| 2 | L2₹27.6 L+₹6.1 L (28.2%)Rejected-AOC | L2 | Rejected-AOC 2nd lowest hence rejected | |
| 3 | L3₹27.9 L+₹6.3 L (29.4%)Rejected-AOC THEERTHAM NADUVILEMURI PADANILAM POST NOORANAD ALAPPUZHA DIST KERALA 690529 | ALAPPUZHA | KERALA | 690529 | L3 | Rejected-AOC 3rd lowest hence rejected | |
| 4 | L4₹28.1 L+₹6.6 L (30.4%)Rejected-AOC | L4 | Rejected-AOC 4th lowest hence rejected |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Belgaum
Garrison Engineer Belgaum,Laxmi Tek,Camp,Belgaum
REPAIR AND MAINTENANCE OF EXTERNAL ELECTRIC SUPPLY SERVICE CONNECTIONS AT JL WING, ACHARYA ENCLAVE, CDO WING, HARDING LINES DEMO TPS, MOHIT ENCLAVE, PC WING NAGZEERA LINES, HARSHAN ENCLAVE II, 115 TA MAHAR, MT DET JL WING AND CDO MESS, HARSHAN ENCLA
2023_MES_593930_1
8938/E8
Open Tender
Civil Works
Item Rate
300 days
BELGAUM
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer Belgaum
₹70,000
Yes
21 Jun 2023
9 May 2023
7 Jun 2023
9 May 2023
5 Jun 2023
22 May 2023
Amount
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable and getting out in soft / loose soil complete all as specified and as directed.
Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.
Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.
Material and labour Sand cushioning for protection of underground cable, consolidated and compacted with clean dry river sand complete all as specified and as directed.
Material and labour well burnt old size Sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and as directed.
Taking down broken MS / wooden / GI sign board any type and an height of maximum upto 5 meter and taken as credit complete all as specified and as directed
Material and labour for Plain galvanised iron sheet 0.32mm thick grade 'O' with 120gm/sqm zinc coating for making design box for sign boards where necessary as required for existing position including necessary turning up mittred angle and necessary decorative boards including shape to chair corner, cleats etc fixed with rivets to support corners of glow sign PGI box and necessary ducts, hosting etc complete all as specified and as directed .
Provision of drawing with computer art work and letters, figure, writing work, scanning etc in approved colour print in glossy paper water proof of approximatee size Length up to maximum 2.00 meterX width maximum up to 0.80 meter andstyle required at site :-complete all as specified and as directed . Note: The work under this item comprises of composing of matter/ drawing by computer as required for location, art work on planner machine and scotch print/inkjet print 720 DPI as approved by GE
All as per the description in item No. 8 here in above but size Length up to maximum 1.6 m x width up to maximum 0.75 m
All as per the description in item No. 8 here in above but size Length up to maximum 1.2 m x width up to maximum 0.6 m
Supply and Fix 0.25 mm thick white rubber coated vinyl sheet or synthetic vinyl sheet printed with scotch/computer inject printing with out door ink and with 300 x 720 DPI and also with 1440 DPI laminated with average 0.15 mm thick high quality weather protected calender film (Coated/laminated and transparent/matt finish) pasted with chemical on and including 1.5mm thick polycarbonate PVC weather protected milky white / transparent sheet and finally thorough washed with liquid detergent soap complete all as specified and as directed .
Supply and Fix Aluminium anodized angle of 22 mm x 22 mm x 0.80 mm thick, fixed to corner of Glow sign board for fixing of acrylic sheet/polycarbonate sheet/Sun Board etc with GI machine screw etc complete all as specified and as directed .
All as per the description in item No. 12 here in above but size 40 mm X 22 mmX 1 mm thick
Fixing the assembled glow sign board any size in position with complete fitting to steel frame/on wall surface with provision of required size of mild steel nuts and bolts, screw , washers etc up to a height of 5 mtr including provision of necessary scaffolding complete all as specified and as directed.
Fixing only laminated board in any position (wall/steel surface) at installation/office area with necessary mild steel nut, bolt & screws up to height 3 meter from GL/floor complete all as specified and as directed.
Supply and Fix Glow sign board comprising as under specification: (a) Supply and Fix Polycarbonate PVC weather protected sheet 1.5mm thick milky white/red complete / coloured vinyl sheet CHEM Opaque/Translation LC-3000 to 5000 series high quality calendar film over all thickness up to 0.25 mm (Average) of approved single/multi colour duly cut letters/corrector or reverse of required size and shape of sign board and fitting to polycarbonate PVC sheet by manually with self adhesive including necessary fixing arrangement and thoroughly wash with plain water complete all as specified and as directed.
Dismentalling and taking down old unserviceable glow sign board of any size and location and Material and labour for fabrication of Flex Board box type of overall size not less than 6' X 4' X 7'', rear side, left and right sides, top & bottom made of GI sheet 26 gauge and front side made of Flex board of suitable thickness duly written with matter as directed and mounted on square sectional pipe 25 mm duly fixed with mild steel nut and bolts to GI sheet frame, for different locations including Supply, fix and testing of 06 Nos fluorescent tube light fittings, patty type, pre-wired with and including copper wound ballast, tube rod, starter etc. and connecting the tube light fittings with using PVC insulated copper conductor of size 23/0.0076 flexible twisted twin core cable to electric source.( Make of cable –Polycab/Finolex) complete all as specified and as directed . Note (i) Frame work of MS angle iron and PCC for fixing the Flex board if any required shall be measured and paid for separately under respective item of this Schedule. (ii) The painting of steel surfaces shall be measured and paid for separately under respective item of this Schedule.
Taking down carefully point wiring (light, fan, power or socket) complete including all fitting such as switch, ceiling rose, pendants, regulators, socket etc and removing from site all as specified and directed by the Engr-in-Charge.
Material and labour for Point wiring for control of 6 Nos on series connection 28/36 watt Tube light fittings with 2.5 Sqmm size FRLSH PVC sheathed multi stranded copper conductor cable including 20 mm dia non metallic rigid PVC conduit pipe with necessary 100x100 mm PVC box including 2.50 Sqmm size FRLSH PVC sheathed multi stranded copper conductor cable as Earthing complete all as specified and as directed . Note :NOTE: (i) Make of PVC cable :Finolex/Polycab/havells(ii) Make of PVC conduit: Avon Plast/Presto plast /Garware
All as per the description in item No. 19 here in above but size but 10 Nos on series connection all complete all as specified and as directed
Supply and fix in repairs PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells
Supply and Fix Fluorescent tube light rod 1 X 28/36/40 Watt including copper open ballast, starter (PVC body), PVC push holder 2 Nos, FRLSH PVC flexible wire twin core copper wire for tube light connection not less 2.50 meter long fixed with 18 gauge GI wire complete all as specified and as directed .Note (i):T/L will be assembled to the glow lamp box without using separate Patti/bracket). including taking out old one and taken as credit complete all as specified and as directed. (ii)Make of Tube light :Philips/CG/Wipro
All as per the description in item No. 23 here in above but of 14 Watt tube light.
Supply and fix 20 mm dia PVC non metalic rigid conduit pipe with necessary fittings fixed on wall/roof as required at site complete all as specified and as directed NOTE: (i) Make of PVC conduit: Avon Plast/Presto plast /Garware
Material and Labour for Steel metal enclosure for DB's , 8 way 240 Volts with 200 Amps,rated bus bar, single door including taking out old one and taken as credit complete all as specified and as directed .NOTE: (i) Make of DB :Indo Asian/Havells/L&T
Supply and fix MCB isolator double pole 40 amps, capacity 240 volt AC including taking out old oneand taken as credit complete all as specified and as directed .NOTE: (i) Make of MCB isolatar :Indo Asian/Havells/L&T
Supply and fix MCB single pole, 10 KA, 06 to 32 Amps, "C" series, 240 Volts AC, 50 HZ including taking out old one and taken as credit complete all as specified and as directed .NOTE: (i) Make of MCB :Indo Asian/Havells/L&T
All as per item no. 27 here-in-before but 63 Amps TPN 415 Volts, AC 50 Hz and all as specified and directed by the Engr-in-Charge.
Supply and fix in repairs LED street light fitting 30 Watt 230 V AC epoxy powder coated ,outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection fixing on pole up to 9 m high from ground level/floor complete all as specified and as directed.Note :Make: Wipro SKYLINE LED LR02-331-XXX-57-XX or Equivalent in M/S Philips/CG
Material and labour for Provding cement concrete PCC type C2 1:3:6 using 40 mm graded aggregate in foundations, filling etc complete all as specified and as directed.
Material and labour for Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, slice valve pit cover and frame, sheet, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing confirming to Fe 290 E -165 including Preparation of new steel surfaces and applying two coats of metalic paint over a coat of metalic primer complete all as specified and as directed.
Material and labour for Painting on metal surface of the glow sign board including priming with red oxide zinc crome primer and synthetic enamelled paint by spray painting system after cleaning and preparation of old surface from dust, oil, rust and make the surface ready for painting complete all as specified and as directed. NOTE : (i) The rent of air compressor, T&P, etc shall deemed to be included in the quoted rate.
Material and labour for Galvanised iron pipe light grade 40mm dia with all fittings and fixed complete on pole/walls/in road etc for cable protection including old GI Pipe of any description taken as credit complete all as specified and as directed. Note : Make of GI Pipe : TATA/JINDAL/PRAKASH SURYA
All as per the description in item No. 33 here in above but of size 25 mm bore dia
All as per the description in item No. 33 here in above but of size 20 mm bore dia
All as per the description in item No. 33 here in above but of size 15 mm bore dia
Supply and fix round copper flexible cable unarmoured 1.5 sq mm, three core
Supply and laying XLPE insulated, armoured, heavy duty, 1100 Volts grade aluminium conductor cable Cross sectional area 10 Sqmm, 4 core in trenches or fixed to wall / passing through pipe / pole and testing compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection, GI Pipe and sand cushining shall be measured and paid for separately.(ii) Make of XLPE cable :Gloster/Polycab/CCI/National
All as per description of item No. 38.00 here-in-before but Cross sectional area 16 sq mm, 4 core
All as per description of item No. 38.00 here-in-before but Cross sectional area 25 sq mm, 4 core.
All as per description of item No.38.00 here-in-before but Cross sectional area 35 sq mm, 3.5 core
All as per description of item No.38.00 here-in-before but Cross sectional area 50 sq mm, 3.5 core .
All as per description of item No.38.00 here-in-before but Cross sectional area 70 sq mm, 3.5 core
All as per description of item No.38.00 here-in-before but Cross sectional area 95 sq mm, 3.5 core
Taking dowm XLPE insulated, armoured, heavy duty, 1100 Volts grade aluminium conductor cable Cross sectional area 10 Sqmm, 4 core and taken as credit compete all as specified and as directed.
Taking dowm XLPE insulated, armoured, heavy duty, 1100 Volts grade aluminium conductor cable Cross sectional area 16 Sqmm, 4 core and taken as credit compete all as specified and as directed.
Taking dowm XLPE insulated, armoured, heavy duty, 1100 Volts grade aluminium conductor cable Cross sectional area 25 Sqmm, 4 core and taken as credit compete all as specified and as directed.
Taking dowm XLPE insulated, armoured, heavy duty, 1100 Volts grade aluminium conductor cable Cross sectional area 35 Sqmm, 3.5 core and taken as credit compete all as specified and as directed.
Taking dowm XLPE insulated, armoured, heavy duty, 1100 Volts grade aluminium conductor cable Cross sectional area 50 Sqmm, 3.5 core and taken as credit compete all as specified and as directed.
Taking dowm XLPE insulated, armoured, heavy duty, 1100 Volts grade aluminium conductor cable Cross sectional area 70 Sqmm, 3.5 core and taken as credit compete all as specified and as directed.
Taking dowm XLPE insulated, armoured, heavy duty, 1100 Volts grade aluminium conductor cable Cross sectional area 95 Sqmm, 3.5 core and taken as creit compete all as specified and as directed.
Attending LT 1100 volt electrical cable/LT panel complaints which including interruption/failure of power supply/voltage variation/replacing fuses as required/tripping of circuit breaker including MCBs/MCCBs/ACBs, etc. Removing burned cable end and refixing after replacing aluminium lugs including using necessary colour coded PVC self adhensive protective tape compete all as specified and as directed. NOTE :-- (i) Earth work/LT Cable if used shall be measured and paid separately, all other materials used shall deemed to be included in the quoted rate. (ii) If contractor shall failed to attend the complaint with in 2 hrs, a penality of Rs.200.00 per hr will imposed on him upto 12 hrs then after a penality of Rs.500.00 per hr will be imposed and GE's decision is final and binding in this regard .
Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 1.500 Sq mm drawn through and including PVC casing and capping medium grade of size 20/25 mm with all necessary fitttings and Provn of one run of 1.50 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 1.50sqmm and one run of 1.50 sqmm and one PVC casing and capping will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware
All as per description of item No.53.00 here-in-before but two run of 2.5 sq mm size FRLS PVC single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 2.5 sq mm PVC (FRLS) insulated & unsheathed copper conductor cable, 1100 Volt grade
Supply and fix in repair copper wounded ballast 36/40 watts 230 volts suitable for the patty type tube light fitting complete all as specified and as directed.
Supply and fix in repair of vintage terminal box of the post top lantern complete with suitable aluminum bus bar - 4 no of 100 amps rating including cement works as required complete all as specified and as directed.
Supply and fix in repair LED flood light 30 watts with robust heat sink and having protection of IP65 complete all as specified and as directed. Note :Make: wipro Garnet 30W LED Floodlight 6500K or Equivalent in M/S Philips/CG
Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Note :Make: Wipro LL20-221-XXX-65-NE or Equivalent price and specification in M/S Philips/CG
Supply and fix LED bulb 10 watts, retrofit type complete all as specified and as directed. , Make : Havells/ Crompton Philips
Supply and fix decorative gate/garden light made of high grade unbreakable polycarbonate materials suitable for retrofit LED lamps 7 wattscomplete all as specified and as directed. Note :Make: Wipro cat part no GardeniaLED LF05-600-024-27-XX:or Equivalent in M/S Philips/CG
SANJAY B SHARMA
Green Ray Enterprises
RAHMAT ALI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .