NIT NO: 319/TC/2026-27

OFFICE OF THE EXECUTIVE ENGINEER E/M DIVISION PWD DURG (C.G.)

TERMS & CONDITIONS

Name of work :- Construction of New Civil Court Building I/C. Water Supply, Sanitary Fittings, Boundary wall, Septic Tank, landscape, Vehicle shade, Tube well, C.C. Road & Electrification Works at Dondilohara Distt.- Balod (C.G.)

1. Electric installation shall be carried out in accordance with the General specification for Electrical Works (Part - I Internal) & (Part - II External) 1972 of C.P.W.D. adopted by E-In-C M.P.W.D. Bhopal & also : Confider with Indian Electrical Rule 1956 as amended. up to Date .

2. Civil contractor should sublet the Electrical Work to only those Electrical contractor who are Registered in PWD for Electrical Work as following class

(I) "D" Class Electrical Contractor - Up to 1.00 Crore

(II) "C" Class Electrical Contractor - Up to 2.00 Crore

(III) "B" Class Electrical Contractor - Up to 10.00 Crore

(IV) "A" Class Electrical Contractor - Unlimited

3. Contractor will submit along with final bill.

(a) Completion Certificate

(b) Completion Plan drawn to a suitable scale on tracing cloth with ink. Indicating Location of main switch, D.B. Circuit fitting and their Location

4. The Contractor will be fully responsible for any accident damages and losses occurred due to negligence of Work. The amount of the losses and damages etc. will be recovered from the Contractor.

5. The Contractor shall have his own tools and plants. Helmet, hand gloves, firs aid box and other safety measures. In good working condition for staff. No Extra payment shall be made for this arrangement and no Claims shall be paid by the department.

6. The Contractor himself shall be fully responsibility for any accident casualty of the staff if occurs due to Electrical fault of any other reason during the work and no claim will be paid for such accident of causality by the

7. The Contractor will be fully responsibility for taking all of safety measures during ontract period.

(a) Electrical power supply arrangement temporarily at site will be made by contractor No payment will be made by PWD Department.

(b) Earthing system should be installed in presence of A.E. (E &M)/Sub Engineer PWD (E.& M)

8. Earth continuity conductor of required size & material should be installed with entire run of wiring. Earth nut bolt must be provided at all switch boards All metallic parts Ceiling fan tube fitting socket out let should be essentially connected to earth.

9. All connection of ceiling fan tube fixture street light fixture shall be made by 3 core PVC/ Rubber sheathed cable of required.

10. The Civil contractor should a Electrical Supervisor for Electrical works at site as per Norms of C.G. / M.P Govt. who Electrical Diploma / Degree Holder as Required as per PAC Amount.

NIT For Construction of New Civil Court Building I/C. Water Supply, Sanitary Fittings, Boundry wall, Septic Tank, landscape, Vechicle shade, Tube well, C.C. Road & Electrification Works at Dondilohara Distt.- Balod

PAC RS. 700.52 Lacs

SERIAL No. Department SOR Year Item Code Description UOM Rate Quantity Amount

1 PWD PWD BLD 2015 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. cum 185.000 3087.5614 571199.000

2 PWD PWD BLD 2015 1.1.2 In ordinary rocks. cum 267.000 473.915 126535.000

3 PWD PWD BLD 2015 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). sqm 7.200 20759.140 149466.000

4 PWD PWD BLD 2015 1.6.1 Extra for every additional lift of 1.5 m or part thereof. In all types of soils cum 26.500 219.670 5821.000

5 PWD PWD BLD 2015 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. Cum 65.000 1766.963 114853.000

6 PWD PWD BLD 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. cum 371.000 3260.350 1209590.000

7 PWD PWD BLD 2015 1.22 Supplying chlorpyrifos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified. litre 208.000 1271.710 264516.000

8 PWD PWD BLD 2015 1.25.1 Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor) Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm sqm 27.500 509.940 14023.000

9 PWD PWD BLD 2015 1.25.2 Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). metre 19.000 1221.900 23216.000

10 PWD PWD BLD 2015 2.1.1 Form Work Providing and fixing form work including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. sqm 139.000 5774.624 802673.000

11 PWD PWD BLD 2015 2.1.2 Wall of any thickness including attached pilasters, buttresses etc. in super structure. sqm 228.000 50.400 11491.000

12 PWD PWD BLD 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape sqm 297.000 2349.514 697806.000

13 PWD PWD BLD 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) sqm 235.000 3675.670 863782.000

14 PWD PWD BLD 2015 2.1.8 Beams, lintels, cantilevers & walls sqm 202.000 3151.322 636567.000

15 PWD PWD BLD 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294.00 82.760 24331.000

16 PWD PWD BLD 2015 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings sqm 230.000 119.940 27586.000

17 PWD PWD BLD 2015 3.1.3 Cement Concrete (PCC/ RCC) Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 2970.000 631.780 1876386.000

18 PWD PWD BLD 2015 3.1.4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). cum 3552.000 23.760 84396.000

19 PWD PWD BLD 2015 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.(Note :Excess/ less cement used as per design mix is payable/ recoverable separately) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4163.000 2240.444 9326970.000

20 PWD PWD BLD 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Floor cum 97.500 905.473 88284.000

21 PWD PWD BLD 2015 3.4 Terrace cum 195.000 34.782 6782.000

22 PWD PWD BLD 2015 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 415 kg 54.500 65891.664 3591096.000

23 PWD PWD BLD 2015 3.12.2 Thermo-Mechanically treated bars FE 500D kg 54.500 165910.750 9042136.000

24 PWD PWD BLD 2015 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. cum 4237.000 27.219 115327.000

25 PWD PWD BLD 2015 3.15 Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. sqm 93.50 272.020 25434.000

26 PWD PWD BLD 2015 3.21.2 Providing and fixing in position impregnated fibre board confirming to IS: 1838 in expansion joints, including cost of primer, sealing compound all complete. 25mm thick sqm 768.000 95.171 73091.000

27 PWD PWD BLD 2015 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263.000 1266.642 4133053.000

28 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Floor cum 121.000 914.326 110633.000

29 PWD PWD BLD 2015 7.6 Terrace cum 242.000 187.650 45411.000

30 PWD PWD BLD 2015 7.11.2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4coarse sand) sqm 382.000 897.010 342658.000

31 PWD PWD BLD 2015 7.19 Moulding and cornices with brick masonry using bricks of crushing strength not less than 35 kg/sqcm and water absorption not more than 20% in cement Mortar 1:4 (1 cement 4 coarse sand) including cement plaster 15 mm thick, 10 cm projected, 20 cm deep (40 cm Girth) in cement mortar 1:4 (1 cement : 4 fine sand) at any floor. metre 252.00 315.800 79582.000

32 PWD PWD BLD 2015 7.20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. sqm 62.500 893.670 55854.000

33 PWD PWD BLD 2015 8.1.2 Wood Work Providing wood work in frames of false ceiling, partition etc. sawn and put in position with main batten 125x50mm (nominal) and cross batten 50x38mm (nominal) both at spacing of 600mm center to center. Sal, bijasal, benteak, khair, haldu cum 61051.00 3.900 238099.000

34 PWD PWD BLD 2015 8.4.3 Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Dash fastener 12x100mm each 39.00 606.000 23634.000

35 PWD PWD BLD 2015 8.15 Extra for double leaf shutter instead of single leaf. sqm 52.000 90.690 4716.000

36 PWD PWD BLD 2015 8.16.1 Providing and fixing PVC membrane foil coated (laminated) flush door shutters, made with core of block board with frame of first class hard wood, coated with 0.30mm membrane pasted with resin using vacuam treatment process complete all but excluding hinges. 35 mm thick (single leaf) sqm 1982.000 273.240 541562.000

37 PWD PWD BLD 2015 8.22.3 Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick: 12 mm thick pre-laminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade). sqm 1126.000 343.200 386443.000

38 PWD PWD BLD 2015 8.30 Providing 50x50x50mm thick wood plugs including cutting brick work and fixing in Cm 1:3 (1 cement :3 sand). each 20.50 1000.000 20500.000

39 PWD PWD BLD 2015 8.35 Providing and fixing wall paneling frame made of commercial grade 12mm thick water proof ply strips 100mm wide at 600mm apart center to center vertically and horizontally with necessary screws, wooden plugs etc complete as required. sqm 552.00 343.200 189446.000

40 PWD PWD BLD 2015 8.36.1 Providing and fixing commercial grade water proof ply for wall paneling on wooden frame with necessary nails complete as required. 19mm sqm 1231.00 86.400 106358.000

41 PWD PWD BLD 2015 8.37 Providing and fixing approved shade veneering on wood wall paneling complete as required. sqm 705.000 343.200 241956.000

42 PWD PWD BLD 2015 8.58.1 Providing and fixing bright finished brass butt hinges with brass polished MS screws complete: 125x85x5.50 mm (Heavy Type) each 245.000 180.000 44100.000

43 PWD PWD BLD 2015 8.60.2 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 250x16mm each 344.000 39.000 13416.000

44 PWD PWD BLD 2015 8.61.2 Providing and fixing brass door latch with brass polished MS screws complete: 250x16x5 mm each 268.000 39.000 10452.000

45 PWD PWD BLD 2015 8.62.2 Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 200x10mm each 231.000 39.000 9009.000

46 PWD PWD BLD 2015 8.65.1 Providing and fixing bright finished brass door handles with brass polished MS screws complete: 125 mm each 55.500 39.000 2165.000

47 PWD PWD BLD 2015 8.78.1 Providing and fixing antique/ SS finished brass parliamentary hinges with antique/ SS polished MS screw complete: 150x125x27x5 mm each 442.00 292.000 129064.000

49 PWD PWD BLD 2015 8.79.1 Providing and fixing antique/ SS finished brass sliding door bolt with necessary bolts, nuts and antique/ SS polished MS screw complete: 300x16mm each 496.000 51.000 25296.000

51 PWD PWD BLD 2015 8.80.1 Providing and fixing antique/ SS finished brass door latch with antique/ SS polished MS screw complete: 300 x16x5 mm each 424.000 51.000 21624.000

52 PWD PWD BLD 2015 8.80.2 Providing and fixing antique/ SS finished brass door latch with antique/ SS polished MS screw complete: 250x16x5 mm each 280.000 11.000 3080.000

53 PWD PWD BLD 2015 8.81.1 Providing and fixing antique/ SS finished brass tower bolts (Barrel type) with antique/ SS polished MS screw complete: 250 x10 mm each 297.000 62.000 18414.000

54 PWD PWD BLD 2015 8.86 Providing and fixing 100mm antique/ SS finished brass mortise latch and lock with six levers and a pair of lever handles with antique/ SS polished MS screw complete. each 1016.00 46.000 46736.000

55 PWD PWD BLD 2015 8.130.1 Providing and fixing hanging powder coated aluminium door stopper with necessary M.S. screws etc complete. Single each 27.50 46.000 1265.000

56 PWD PWD BLD 2015 8.144.3 Providing and fixing stainless steel fixed stopper with necessary stainless steel screws complete. 60 mm long each 73.500 46.000 3381.000

57 PWD PWD BLD 2015 8.158 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete. each 1450.000 46.000 66700.000

58 PWD PWD BLD 2015 9.2 Structural steel work riveted or bolted or welded in built-up sections, trusses and frames work upto a height of 5m above plinth level, including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. Kg 66.000 3938.930 259969.000

59 PWD PWD BLD 2015 9.3.1 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-250 kg 88.500 4674.240 413670.000

60 PWD PWD BLD 2015 9.4 Extra for curvature in making steel work in tubular structure in built-up sections, trusses and frame work kg 2.30 3502.080 8055.000

61 PWD PWD BLD 2015 9.5 Extra for hoisting trusses and placing in position over height above 5m for every 2.5 m height or part thereof. kg 2.700 3502.080 9456.000

62 PWD PWD BLD 2015 9.6.2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (FOR 4 NO GATE) Providing 35.00Kg/Sqm Kg 68.000 1996.447 135758.000

63 PWD PWD BLD 2015 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. sqm 3330.000 9.120 30370.000

64 PWD PWD BLD 2015 9.14 Providing and fixing steel door made of angle iron of suitable sizes with M.S. grill of approved pattern made of M.S. flats or square or round bars coat of red oxide zinc chromate primer. kg 79.50 900.000 71550.000

65 PWD PWD BLD 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. kg 67.500 7605.600 513378.000

66 PWD PWD BLD 2015 9.27.3 Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring. 80x0.90mm M.S. Laths sqm 1485.000 89.920 133531.000

67 PWD PWD BLD 2015 9.28 Providing and fixing 27.5cm long wire spring for rolling shutters. each 362.000 7.000 2534.000

68 PWD PWD BLD 2015 9.29.1 Providing and fixing M.S. sheet top cover for rolling shutter 1.25mm thick sqm 540.000 17.880 9655.000

69 PWD PWD BLD 2015 9.30 Providing and fixing ball bearing for rolling shutters. each 423.000 7.000 2961.000

70 PWD PWD BLD 2015 9.33 Providing and fixing GI wire gauge of average width of aperture 1.56mm with wire of 0.45mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete. sqm 569.00 24.000 13656.000

71 PWD PWD BLD 2015 9.40 Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-incharge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm withtape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) Meter 164.000 563.510 92416.000

72 PWD PWD BLD 2015 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: 9.47.1) For fixed portion kg 331.000 1576.640 521868.000

73 PWD PWD BLD 2015 9.47.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). Kg 338.000 1683.850 569141.000

74 PWD PWD BLD 2015 9.48 Extra for powder coated (minimum 50 micron) aluminium sections instead of anodized. kg 27.000 1220.280 32948.000

75 PWD PWD BLD 2015 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized. Kg 34.50 2033.100 70142.000

76 PWD PWD BLD 2015 9.51.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): 9.51.2) With float glass panes of 5 mm thickness sqm 708.000 381.360 270003.000

77 PWD PWD BLD 2015 9.54 Providing and fixing anodized aluminium framed grill (minimum anodic coating of grade AC 15)of of approved shape, pattern and design including cutting, bending, hoisting and erecting/ fixing to door, window frame or to wall with fixing clips or hold fasteners or bolts and nuts as required etc. complete. kg 396.000 172.800 68429.000

78 PWD PWD BLD 2015 9.57.2 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. SS Grade 304 kg 525.000 487.350 255859.000

79 PWD PWD BLD 2015 9.59.2 Extra for providing and fixing reflective glass panes in aluminium door, window, ventilator shutters and partitions instead of float glass. 5 mm thickness sqm 292.00 248.400 72533.000

80 PWD PWD BLD 2015 9.63.1 Providing and fixing clear float toughened glass door or parmition in required thickness frameless in appropriated sizes inclusive of edge molding polish and making required size slot or hole for patch fitting/hardware etc. The glass to be assembled together with patch fitting and hardware in proper alignment with all labour tools and tackles etc. complete (Patch fittings and hardware to be paid for seperately). 12 mm thick for door/partition. sqm 2560.000 93.440 239206.000

81 PWD PWD BLD 2015 9.64.1 Providng and fixing of stainless steel grade 316 patch fitting and hardware of approved (Hardwyn, Ozone,Godrej) make in frame less toughened glass door or partition in porper alignment with all tools tackles and labour etc complete. Top patch with pivot SS grade 304 NO.s 2297.000 20.000 45940.000

82 PWD PWD BLD 2015 9.64.2 Top/side patch glass or L-connector patch SS grade 304 NO.s 3058.000 20.000 61160.000

83 PWD PWD BLD 2015 9.64.3 Bottom patch to be connected with floor machine NO.s 2145.000 8.000 17160.000

84 PWD PWD BLD 2015 9.64.4 Bottom lock patch with three key SS grade 304 NO.s 3245.000 8.000 25960.000

85 PWD PWD BLD 2015 9.64.6 Two way action Hydraulic floor spring machine heavy duty double cylinder type Capacity 120/150 kg mounted on floor including required cutting on floor and proper grouting with rich cement mortar. NO.s 7885.000 6.000 47310.000

86 PWD PWD BLD 2015 9.64.7 H type habdle 32x600 mm SS 304 grade. NO.s 2871.000 6.000 17226.000

87 PWD PWD BLD 2015 9.64.8 Floor/Wall to Grass Connector SS grade 304 NO.s 1084.00 4.000 4336.000

88 PWD PWD BLD 2015 10.10 Extra for providing and fixing wind ties of 40x6mm flat iron section. metre 118.000 1032.000 121776.000

89 PWD PWD BLD 2015 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 636.000 566.000 359976.000

90 PWD PWD BLD 2015 10.14 Providing and fixing 2mm thick semi transparent polycarbonate profile roofing sheet of approved make and colour to make any normal roofing / covering and fixing as per manufacture specification at spacing not more than 1.2 m centre to centre with EPDM gasket and silicon sealant fixed with self drilling stainless steel screws all complete as per direction of Engineer-in-Charge. sqm 1900.00 478.020 908238.000

91 PWD PWD BLD 2015 10.15 Extra for working height above 6 metre for fixing GI/ profile/ PVC/ polycarbonate sheet for every additional height of 1 metre of part thereof. sqm 4.70 478.020 2247.000

92 PWD PWD BLD 2015 10.16.1 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Ridges plain (500-600mm) metre 552.00 71.000 39192.000

93 PWD PWD BLD 2015 10.16.6 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Gutter. (600 mm over all girth). metre 629.00 234.800 147689.000

94 PWD PWD BLD 2015 10.61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. sqm 658.000 1001.780 659171.000

95 PWD PWD BLD 2015 11.1.2 Plastering and Pointing Work Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) sqm 87.000 793.220 69010.000

96 PWD PWD BLD 2015 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 91.500 7035.630 643760.000

97 PWD PWD BLD 2015 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 107.000 7983.510 854236.000

98 PWD PWD BLD 2015 11.5 Neat Cement punning. sqm 33.000 301.550 9951.000

99 PWD PWD BLD 2015 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. kg 43.500 464.600 20210.000

100 PWD PWD BLD 2015 11.13 Extra for plastering done on mouldings, cornices or architraves including neat finish to line and level. sqm 134.00 690.300 92500.000

101 PWD PWD BLD 2015 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. sqm 86.000 1090.800 93809.000

102 PWD PWD BLD 2015 12.37.1 Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tile including cleaning of joint etc complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade using white cement sqm 640.000 410.260 262566.000

103 PWD PWD BLD 2015 12.44 Extra for nosing in Granite stone for treads. metre 126.000 176.400 22226.000

104 PWD PWD BLD 2015 12.45.2 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) Granite stone black sqm 2646.000 184.930 489325.000

105 PWD PWD BLD 2015 12.45.3 Granite stone lakha red/ shahi red sqm 4200.00 79.480 333816.000

106 PWD PWD BLD 2015 12.46.2 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). Granite stone black sqm 2719.000 135.990 369757.000

107 PWD PWD BLD 2015 12.65.2 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Pigment Coloured (rubber mould) precast interlock concrete blocks sqm 632.000 1325.380 837640.000

108 PWD PWD BLD 2015 12.74.1 Providing and fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades overs 20mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with matching pigment complete. Size 300x300mm thickness 7 to 8 mm sqm 779.000 602.910 469667.000

109 PWD PWD BLD 2015 12.74.2 Size 400x400mm thickness 7 to 8 mm sqm 826.000 135.190 111667.000

110 PWD PWD BLD 2015 12.75.1 Providing and fixing rectified glazed ceramicWall/Dado tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades overs 12mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with matching pigment complete. Size 300x450mm thickness 7 to 8 mm sqm 710.000 688.740 489005.000

111 PWD PWD BLD 2015 12.79.1 Providing and laying DOUBLE/MULTI CHARGE (minimum 2.0mm thick layer) VITRIFIED floor tiles with water absortion less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours, shades and size mentioned below (+/- 10mm) laid on 20mm thick cement mortal 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm thickness 9 to 10 mm sqm 1082.000 2270.490 2456670.000

112 PWD PWD BLD 2015 12.80.1 Providing and laying tactile full body vitrified floor tiles (for vision impaired person as per standard laid down in CPWD guide lines) of size having 300x300mm and total thickness 15mm, with water absortion less than 0.05% and conforming to IS:15622-2017 of H&R johnson or equivalent approved make in all colours, laid on 20mm thick cement mortal 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Dot. Pattern hazard warning tactile 23mm dia 36 dots ( 6 dot in both derection) and 5mm exposed from the suface. sqm 2127.000 114.000 242478.000

113 PWD PWD BLD 2015 12.80.2 Strip pattern derectional tactile 23mm strip 4 nos. equality spaced and 5mm exposed to the surface. sqm 2127.000 228.000 484956.000

114 PWD PWD BLD 2015 13.6.2 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. 13.6.2 Granite stone black sqm 3279.000 267.370 876706.000

115 PWD PWD BLD 2015 13.12 Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut DHOLPUR SAND STONE (machine cut edges) of uniform colour and size upto 1mx1m size, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with weather sealant. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately.) sqm 1803.00 48.000 86544.000

116 PWD PWD BLD 2015 13.16 Providing and fixing structural steel frame (for dry cladding of sand stone) on walls at all heights using M.S. square/ rectangular tube in the approved pattern including cost of cutting, bending, welding etc. The frame work shall be supported in wall with the help of MS brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block of grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) of size 300x230x300mm and with approved expansion hold fasteners on CC/RCC surface including drilling necessary holes, approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of "ZINC" primer and painted with two or more coats of epoxy paint. (Stainless steel cramps shall be paid separately) kg 118.00 480.000 56640.000

117 PWD PWD BLD 2015 13.17.2 Providing and fixing 15mm thick Granite (machine cut, table rubbed & mirror polished on both sides) for partition curtain in toilets or similar locations of required size in wall with cement mortar 1:4 (1 cement : 4 coarse sand) including cutting chase in wall and joint with wall treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. Granite stone black sqm 2924.000 15.120 44211.000

118 PWD PWD BLD 2015 13.19.2 Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work sqm 172.000 923.200 158790.000

119 PWD PWD BLD 2015 13.22.1 Mirror polishing on marble work/ Kota stone/ Granite work where ever required to give high gloss finish complete. On walls/ Floor sqm 184.000 122.230 22490.000

120 PWD PWD BLD 2015 14.25 Providing and laying French sprit polish on new wood work after preparing the surface by rubbing down smooth with sand papers, covering the knots, if visible, applying a coat of wood filler, cleaning the surface, applying 50 or more coats of French spirit polish till the surface gives high gloss. sqm 143.00 319.890 45744.000

121 PWD PWD BLD 2015 14.56 Providing and applying 2mm thick white cement based polymeric Exterior grade putty with minimum 3 coats applied @ 5.4 kg/10 Sqm as per relevant IS code 17545: 2021 ( Product such as Birla wall care, Asian trucare, JK wall putty, Berger Bison Wall putty ) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. sqm 86.000 16484.030 1417627.000

122 PWD PWD BLD 2015 14.64 Providing and applying PREMIUM Plastic Emulsion paint with roller application minimum 3 coats applied @ 0.75 lit/ 10 sqm up to final finish as per relevant I.S. Code 15489:2013 Type-1 class D, C (Glossy and Semi Glossy Finish) of required shade (Product such as Asian Apcolite Premium , Dulux Super Cover, Berger Easy Clean , Nippon Breeze Metex Gold, Opus I-50/ Calista) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc complete for the work. ( With 3 year Warranty.) sqm 84.000 9383.590 788222.000

123 PWD PWD BLD 2015 14.66 Providing and applying on exterior surface with LITE Economy Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit/10 sqm up to final finish as per relevant IS code 15489:2013 Type-2 class D, C ( Glossy / Semi Glossy finish) (Product such as Asian ACE Spark, Dulux Promise exterior smart, Nerolac Littil Master, Berger Bison Lite, Nippon Superio etc) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work ( With 2 year Warranty. ) sqm 55.000 2254.040 123972.000

124 PWD PWD BLD 2015 14.67 Providing and applying on exterior surface with Economy Exterior Emulsion paint of required shades to give protective and water proof finish minimum three coats applied @ 1.43 lit/10 sqm up to final finish as per relevant IS code 15489:2013 Type-2 class D, C ( Glossy / Semi Glossy finish) (Product such as Asian ACE Dulux Promise Exterior, Berger Wall Masta, Nerolac Suraksha Plus, Nippon Shogun Opus, One Style Power Bright) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work ( With 2 year Warranty. ) sqm 84.000 5505.380 462452.000

125 PWD PWD BLD 2015 14.69 Providing and applying on exterior surafce with heavy duty exterior emulsion paint of required shade to give protective and water proof finish minimum 3 coats applied @ 1.40 lit/10sqm up to final finish as per relevant I.S. Code 15489 :2013 Type 2 Class D,C ( Glossy /Semi Glossy finish) ( Product such as Asian Apex, Dulux Weather Shield Prima E900, Berger Weathercoat Antidust, Nerolac Everlac Excel, Nippon Sumo Etra Opus Tre flex) inclusive of providing abro tape on edges and article and cleaning of door windows, floor and surface as required with all tools tackles and labour etc, complete for the work. ( with 3 years Warranty) sqm 133.000 873.780 116213.000

126 PWD PWD BLD 2015 18.4.3 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White wall hung type each 4415.000 20.000 88300.000

127 PWD PWD BLD 2015 18.10.1 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour: 30 CM length each 56.00 20.000 1120.000

128 PWD PWD BLD 2015 18.10.2 45 CM length each 66.50 20.000 1330.000

129 PWD PWD BLD 2015 18.13.2 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back type urinal of size 460x380x250mm each 1529.00 18.000 27522.000

130 PWD PWD BLD 2015 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm each 1430.000 5.000 7150.000

131 PWD PWD BLD 2015 18.17.5 White Oval or round size 550x400mm. each 1605.00 20.000 32100.000

132 PWD PWD BLD 2015 18.23.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of brackets, cutting and making good the wall wherever required : Size 600x450x200mm each 4502.00 3.000 13506.000

133 PWD PWD BLD 2015 18.25.2 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia each 88.50 50.000 4425.000

134 PWD PWD BLD 2015 18.26.2 Providing and fixing PVC waste coupling in wash basin/ sink. 40 mm each 61.00 50.000 3050.000

135 PWD PWD BLD 2015 18.27.2 Providing and fixing cast iron grating for gully trap. 150x150mm square each 38.00 25.000 950.000

136 PWD PWD BLD 2015 18.29 Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 599.000 20.000 11980.000

137 PWD PWD BLD 2015 18.32.1 Providing and fixing sand cast iron S&S pipe as per IS: 1729 for soil, waste and vent pipes: 100 mm dia. metre 783.000 20.000 15660.000

139 PWD PWD BLD 2015 18.34.1 Providing and fixing sand cast iron S&S bend with access door of required degree as per IS : 1729, insertion rubber washer 3 mm thick, bolts and nuts: 100 mm dia each 418.000 20.000 8360.000

141 PWD PWD BLD 2015 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. metre 182.000 75.000 13650.000

143 PWD PWD BLD 2015 18.76.3 150 mm dia pipe. metre 440.000 80.000 35200.000

144 PWD PWD BLD 2015 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 18.77.1) Tee/ Tee with door/ Bend 45°/ Bend 90° 75mm each 113.000 100.000 11300.000

147 PWD PWD BLD 2015 18.77.2.1 Double Y with or without door 75 mm each 129.000 6.000 774.000

149 PWD PWD BLD 2015 18.77.3.2 Vent covel 75 mm each 34.000 20.000 680.000

151 PWD PWD BLD 2015 18.77.4.1 Access door cap 75 mm each 49.50 25.000 1238.000

153 PWD PWD BLD 2015 18.77.5 P trap 110mmx110mm long each 227.000 20.000 4540.000

154 PWD PWD BLD 2015 18.77.6 Nahani trap 110x75mm each 90.500 55.000 4978.000

155 PWD PWD BLD 2015 18.77.7 Multi floor trap 110 each 122.000 10.000 1220.000

156 PWD PWD BLD 2015 18.77.8 Plain reducing Tee 110x75mm each 129.00 25.000 3225.000

157 PWD PWD BLD 2015 18.78.1 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm each 57.000 100.000 5700.000

159 PWD PWD BLD 2015 18.79.1 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour over a coat of primer (of approved quality) for new work :100 mm diameter pipe metre 24.50 30.000 735.000

160 PWD PWD BLD 2015 18.79.2 75 mm diameter pipe metre 19.00 40.000 760.000

161 PWD PWD BLD 2015 18.80.1 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc : 100 mm diameter pipe metre 12.50 30.000 375.000

162 PWD PWD BLD 2015 18.80.2 75 mm diameter pipe metre 9.10 40.000 364.000

163 PWD PWD BLD 2015 18.81.1 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6mm, one bolts on each side of the pipe. Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). each 136.00 100.000 13600.000

164 PWD PWD BLD 2015 18.81.2 Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). each 173.00 60.000 10380.000

165 PWD PWD BLD 2015 18.81.3 Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). each 217.00 40.000 8680.000

166 PWD PWD BLD 2015 19.4.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 15 mm nominal outer dia .Pipes. metre 110.000 30.000 3300.000

167 PWD PWD BLD 2015 19.4.2 20 mm nominal outer dia .Pipes. metre 151.000 25.000 3775.000

168 PWD PWD BLD 2015 19.4.3 25 mm nominal outer dia .Pipes. metre 199.000 20.000 3980.000

169 PWD PWD BLD 2015 19.4.4 32 mm nominal outer dia .Pipes. metre 271.000 10.000 2710.000

170 PWD PWD BLD 2015 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 15 mm nominal outer dia .Pipes. metre 133.000 150.000 19950.000

171 PWD PWD BLD 2015 19.5.2 20 mm nominal outer dia .Pipes. metre 167.000 100.000 16700.000

172 PWD PWD BLD 2015 19.5.3 25 mm nominal outer dia .Pipes. metre 213.000 50.000 10650.000

173 PWD PWD BLD 2015 19.5.4 32 mm nominal outer dia .Pipes. metre 284.000 25.000 7100.000

174 PWD PWD BLD 2015 19.6.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 15 mm nominal outer dia pipes metre 91.500 40.000 3660.000

175 PWD PWD BLD 2015 19.6.2 20 mm nominal outer dia pipes metre 121.000 100.000 12100.000

176 PWD PWD BLD 2015 19.6.3 25 mm nominal outer dia pipes metre 165.000 75.000 12375.000

177 PWD PWD BLD 2015 19.6.4 32 mm nominal outer dia pipes metre 228.000 150.000 34200.000

178 PWD PWD BLD 2015 19.6.5 40 mm nominal outer dia pipes metre 300.000 100.000 30000.000

179 PWD PWD BLD 2015 19.6.6 50 mm nominal outer dia pipes metre 476.000 50.000 23800.000

180 PWD PWD BLD 2015 19.13.2 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (350 grams) each 237.00 15.000 3555.000

181 PWD PWD BLD 2015 19.13.3 Stop cock (350 grams) each 237.00 20.000 4740.000

182 PWD PWD BLD 2015 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) each 382.000 4.000 1528.000

183 PWD PWD BLD 2015 19.14.2 Long nose bib cock (500 grams) each 455.000 3.000 1365.000

184 PWD PWD BLD 2015 19.14.3 Long body bib cock (500 grams) each 426.000 4.000 1704.000

185 PWD PWD BLD 2015 19.14.4 Piller Cock (400 grams) each 398.00 27.000 10746.000

186 PWD PWD BLD 2015 19.14.5 Two way bib cock (800 grams) each 708.000 20.000 14160.000

187 PWD PWD BLD 2015 19.14.7 Angle valve for basin mixer and geyser points (450 grams) each 382.00 5.000 1910.000

188 PWD PWD BLD 2015 19.14.11 Hand shower set with flexible extension pipe each 754.000 20.000 15080.000

189 PWD PWD BLD 2015 19.14.12 Bottle trap set with extension pipes each 473.00 5.000 2365.000

190 PWD PWD BLD 2015 19.14.13 Toilet paper holder each 248.00 20.000 4960.000

191 PWD PWD BLD 2015 19.14.14 Soap dish plate each 163.000 15.000 2445.000

192 PWD PWD BLD 2015 19.14.15 Shower rose (revolving type) (150mm) each 269.000 15.000 4035.000

193 PWD PWD BLD 2015 19.14.16 Towel rail (600mm long x 20mm dia) each 338.000 5.000 1690.000

194 PWD PWD BLD 2015 19.14.17 Towel ring (150 mm dia) each 254.00 5.000 1270.000

195 PWD PWD BLD 2015 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) set 774.00 20.000 15480.000

196 PWD PWD BLD 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51.000 50.000 2550.000

197 PWD PWD BLD 2015 19.16.1 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore each 436.000 5.000 2180.000

198 PWD PWD BLD 2015 19.16.2 32 mm nominal bore. each 510.000 5.000 2550.000

199 PWD PWD BLD 2015 19.16.3 40 mm nominal bore each 596.00 2.000 1192.000

200 PWD PWD BLD 2015 19.16.4 50 mm nominal bore each 762.00 1.000 762.000

201 PWD PWD BLD 2015 19.17.1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore each 284.000 18.000 5112.000

202 PWD PWD BLD 2015 19.17.2 20 mm nominal bore each 394.000 40.000 15760.000

203 PWD PWD BLD 2015 19.17.3 25 mm nominal bore each 432.000 10.000 4320.000

204 PWD PWD BLD 2015 19.18.2 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 32 mm nominal bore each 556.000 2.000 1112.000

205 PWD PWD BLD 2015 19.18.3 40 mm nominal bore each 688.000 2.000 1376.000

206 PWD PWD BLD 2015 19.18.4 50 mm nominal bore each 993.000 4.000 3972.000

207 PWD PWD BLD 2015 19.19.2 Providing and fixing gun metal non- return valve (vertical type) of approved quality (screwed end) : 32 mm nominal bore each 608.000 2.000 1216.000

208 PWD PWD BLD 2015 19.19.3 40 mm nominal bore each 753.000 8.000 6024.000

209 PWD PWD BLD 2015 19.20.3 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 25 mm nominal bore each 333.00 1.000 333.000

210 PWD PWD BLD 2015 19.37.1 Providing and placing in position C.I. double acting air valve of approved make. 50 mm dia each 4634.00 2.000 9268.000

211 PWD PWD BLD 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank litre 7.300 10000.000 73000.000

212 PWD PWD BLD 2015 19.43 Cutting holes more than 20x20 cm and upto 30x30 cm in walls including making good the same : each 125.000 30.000 3750.000

213 PWD PWD BLD 2015 19.44 Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. each 94.000 30.000 2820.000

214 PWD PWD BLD 2015 19.45 Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. metre 46.00 60.000 2760.000

215 PWD PWD BLD 2015 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : each 754.00 10.000 7540.000

216 PWD PWD BLD 2015 19.48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : each 4644.000 5.000 23220.000

217 PWD PWD BLD 2015 19.49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : each 8013.00 2.000 16026.000

218 PWD PWD BLD 2015 20.1.1 Providing, laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter metre 162.000 30.000 4860.000

219 PWD PWD BLD 2015 20.1.2 150 mm diameter metre 262.00 150.000 39300.000

220 PWD PWD BLD 2015 20.1.3 200 mm diameter metre 506.00 60.000 30360.000

221 PWD PWD BLD 2015 20.2.1 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 100 mm diameter S.W. pipe metre 357.000 30.000 10710.000

222 PWD PWD BLD 2015 20.2.2 150 mm diameter S.W. pipe metre 436.00 30.000 13080.000

223 PWD PWD BLD 2015 20.2.3 200 mm diameter S.W. pipe metre 508.00 15.000 7620.000

224 PWD PWD BLD 2015 20.3.2 Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 150x100 mm size P type each 1397.000 20.000 27940.000

225 PWD PWD BLD 2015 20.5.1 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 100 mm dia. R.C.C. pipe metre 309.00 30.000 9270.000

226 PWD PWD BLD 2015 20.5.2 150 mm dia. R.C.C. pipe metre 353.00 20.000 7060.000

227 PWD PWD BLD 2015 20.7.1 Constructing brick masonry manhole with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : each 6703.00 20.000 134060.000

228 PWD PWD BLD 2015 20.7.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : each 18977.00 3.000 56931.000

229 PWD PWD BLD 2015 20.9.1 Providing and constructing brick masonry circular arch type manhole upto 1.67m depth, 0.91m internal dia at bottom and 0.56m dia at top having brick masonry wall 190mm thick with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, providing and fixing S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg, in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) all complete as per standard design (excavation and foot rests shall be paid for separately) : Manhole of depth 0.91m. each 5970.000 1.000 5970.000

230 PWD PWD BLD 2015 20.11.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design: With 20x20 mm square bar each 168.000 5.000 840.000

231 PWD PWD BLD 2015 20.14.1 Supplying and fixing C.I. cover without frame for manholes : 500 mm Diameter C.I. Cover (medium duty) the weight of the cover to be not less than 58 kg. each 3041.000 3.000 9123.000

232 PWD PWD BLD 2015 20.19.2 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 250 to 300 mm diameter each 217.000 5.000 1085.000

233 PWD PWD BLD 2015 20.32.2 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm dia each 610.000 5.000 3050.000

234 PWD PWD BLD 2015 21.1.1.3 RAIN WATER HARVESTING & TUBEWELLS Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level. All types of soil 150 mm dia. metre 339.000 55.000 18645.000

235 PWD PWD BLD 2015 21.1.2.3 Rocky strata including Boulders. 150 mm dia. metre 396.000 160.000 63360.000

236 PWD PWD BLD 2015 21.2.2.3 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level. Rocky strata including Boulders. 150 mm dia. metre 424.000 120.000 50880.000

237 PWD PWD BLD 2015 21.5.3 Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge. 150 mm nominal dia metre 1304.000 15.000 19560.000

238 PWD PWD BLD 2015 21.8.3 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia having minimum wall thickness 5.0 mm metre 1248.000 40.000 49920.000

239 PWD PWD BLD 2015 21.9 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. cum 1048.00 10.000 10480.000

240 PWD PWD BLD 2015 21.11.3 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150 mm dia each 217.000 3.000 651.000

241 PWD PWD BLD 2015 21.12.3 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp. each 1055.000 2.000 2110.000

242 PWD PWD BLD 2015 21.13.3 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I). 150 mm dia each 171.000 2.000 342.000

243 PWD PWD BLD 2015 21.14.1 Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately). Stone boulders of size range 5 cm to 20 cm, in recharge pit cum 863.00 4.500 3884.000

244 PWD PWD BLD 2015 21.14.2 Gravels of size range 5 mm to 10 mm, over the existing layer of boulders cum 806.00 4.500 3627.000

245 PWD PWD BLD 2015 21.14.3 Coarse sand of size range 1.5 mm to 2 mm over existing layer of gravel cum 471.00 4.500 2120.000

246 PWD PWD BLD 2015 21.16 Providing ISI Mark 32 mm dia G.I. ( B class) riser pipe and M.S. plunger rod in 3 meter length socketed on one end as per IS: 1239 ( Part I) 1990 with up to date amendments and socket as per IS: 2062/1990 up to date amendments. metre 275.00 200.000 55000.000

247 PWD PWD BLD 2015 21.17 Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable) point 1502.000 5.000 7510.000

248 PWD PWD BLD 2015 21.18 Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand, 4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre) litre 18.50 1000.000 18500.000

249 PWD PWD BLD 2015 21.19 Providing and fixing 80-100 mm dia PVC ball valve for inlet/ outlet of rain water harvesting pipe and filter. each 644.000 12.000 7728.000

250 PWD PWD BLD 2015 22.1 HORTICULTURE AND LANDSCAPING Trenching in ordinary soil upto a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly leveling with in a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). cum 115.000 1985.290 228308.000

251 PWD PWD BLD 2015 22.2 Supplying and stacking of good earth at site including royalty, loading, unloading and carriage upto 5 km (earth measured in stacks will be reduced by 20% for payment). cum 201.000 397.060 79809.000

252 PWD PWD BLD 2015 22.4 Supplying and stacking at site well decayed cow dung manure from approved source, including loading, unloading and carriage upto 5 km (manure measured in stacks will be reduced by 8% for payment). cum 236.000 330.880 78088.000

253 PWD PWD BLD 2015 22.8 Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately). cum 17.500 1985.290 34743.000

254 PWD PWD BLD 2015 22.9 Mixing earth and sludge or manure in proportion specified or directed. cum 11.000 1985.290 21838.000

255 PWD PWD BLD 2015 22.14.1 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 1.2 m dia and 1.2 m deep. Each 274.000 50.000 13700.000

256 PWD PWD BLD 2015 22.25.1 Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand: Hedges like Alife, Dorenta, Tikoma etc each 14.000 200.000 2800.000

257 PWD PWD BLD 2015 22.25.2 Furn like Arica, China etc (3 year old) each 125.000 100.000 12500.000

258 PWD PWD BLD 2015 22.25.3 Hibiscus (Flower)/ Rose each 26.500 100.000 2650.000

259 PWD PWD BLD 2015 22.25.4 Carpet grass (well developed) sqm 263.000 200.000 52600.000

260 PWD PWD ROAD 2015 3.12 Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.>5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) cum 223.00 772.35 172234.000

261 PWD PWD ROAD 2015 3.20 (ii) Construction of RCC open drain Construction of RCC open drain 0.60m x 0.60m inside dimension lined with 120 mm thick RCC M-20 walls, 120 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 8 mm dia horizontal bars @ 150 mm c/c and L-shaped 8 mm dia vertical bars @ 150 mm c/c (L= 800 mm) including cutting , bending and binding wire, placing in position , providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications. meter 2592.00 111.000 287712.000

262 PWD PWD ROAD 2015 3.25(ii) Construction of RCC drain/chamber cover, placing in position, providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications excluding reinforcement. with RCC M-20 cum 4146.00 8.860 36734.000

263 PWD PWD ROAD 2015 3.25(iii) Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in drain/cover/chamber complete as per Drawing and Technical Specifications. MT 56301.00 0.886 49883.000

264 PWD PWD ROAD 2015 4.1 A (b)(i) Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing graded Material, ,carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 Plant mix method (with Mechanically crushed stone only) For Sub-base cum drainage layer or upper sub-base with Grading-V Material cum 1372.00 392.850 538990.000

265 pwd PWD ROAD 2015 6.1 Dry Lean Cement Concrete Sub-base as per IRC:SP-49 (Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 26.5 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing as per clause 601.) cum 2332.00 232.490 542167.000

266 PWD PWD ROAD 2015 6.7 Amd. Dated 12.10.15 Providing and laying un-reinforced Cement Concrete without Dowel bars including formworks and expansion contraction & longitudinal joints as per design and as per IRC-62-2014, over a prepared base a per approved mix design and finishing to lines and grade as per Drawing for Pavement thickness less than 200mm in Low Volume Roads. PCC Grade M30 with minimum Cement Content @375kg/cum cum 4391.00 445.400 1955751.000

267 PWD PWD ROAD 2015 9.2 A Providing and laying Reinforced Cement Concrete pipe NP 4 / prestrssed concrete pipe on first class bedding (Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first class bedding of granular material including fixing collar with cement mortar 1:2 and bedding as per clause 2904 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . ) 600 mm dia meter 2863.00 25.000 71575.000

268 PWD PWD ROAD 2015 12.8 Providing and planting of Bogenbelia dwarf, chandni dwarf, kaner dwarf vr flower bearing plants with 0’9” x 0’9” depth pit formation and soil preparation work’s, (Mixing organic manure and plant’s protection insecticide). Up to 4 month maintenance. Each 88.00 200.000 17600.000

269 PWD PWD ROAD 2015 12.9 Providing and planting of dwarf red Ekalyha plants showing mass effect view with 0’9” x 0’9”x1’0” depth pit formation and soil preparation work’s, (Mixing organic manure and plant’s protection insecticide). Up to 4 month maintenance Each 380.00 50.000 19000.000

270 PWD PWD ROAD 2015 12.10 Providing and planting of plumeria (Champa) 2’0” to 3’0” heighted plants with 1’0” x 1’0”x1’6” depth pit formation and soil preparation work’s, (Mixing organic manure and plant’s protection insecticide). Up to 4 month maintenance. Each 72.00 100.000 7200.000

271 PWD PWD ROAD 2015 12.11 Providing and planting of Golden durenta multi branches plants for showing mass effect in 0’6” x 0’6” distance with soil preparation work’s, (Mixing organic manure and plant’s protection insecticide). Up to 4 month maintenance. Each 182.00 50.000 9100.000

272 PWD ELECT 2020 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.7.1 Short Point Point 266.00 105 27930.00

273 PWD ELECT 2020 1.7.2 Medium Point Point 424.00 147 62328.00

274 PWD ELECT 2020 1.7.3 Long Point Point 588.00 586 344568.00

275 PWD ELECT 2020 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 216.00 170 36720.00

276 PWD ELECT 2020 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.10.3 Long Point Point 922.00 20 18440.00

277 PWD ELECT 2020 1.10.4 Extra Long Point I Point 1302.00 18 23436.00

278 PWD ELECT 2020 1.10.5 Extra Long Point II Point 1657.00 10 16570.00

279 PWD ELECT 2020 1.10.6 Extra Long Point III Point 1995.00 6 11970.00

280 PWD ELECT 2020 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.11.3 Long Point Point 1350.00 44 59400.00

281 PWD ELECT 2020 1.11.4 Extra Long Point I Point 1807.00 26 46982.00

282 PWD ELECT 2020 1.11.5 Extra Long Point II Point 2315.00 15 34725.00

283 PWD ELECT 2020 1.11.6 Extra Long Point III Point 2825.00 11 31075.00

284 PWD ELECT 2020 1.12 Wiring for power plug point with 3x6 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 32 Amp SPMCB "C" curve and 6 pin 20 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.12.3 Long Point Point 1705.00 10 17050.00

285 PWD ELECT 2020 1.12.4 Extra Long Point I Point 2326.00 9 20934.00

286 PWD ELECT 2020 1.12.5 Extra Long Point II Point 3016.00 7 21112.00

287 PWD ELECT 2020 1.12.6 Extra Long Point III Point 3708.00 6 22248.00

288 PWD ELECT 2020 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.13.1 3 X 1.5 sq. mm in 20mm conduit Metre 92.00 651.0 59892.00

289 PWD ELECT 2020 1.13.2 3 X 2.5 sq. mm in 20mm conduit Metre 111.00 1308.0 145188.00

290 PWD ELECT 2020 1.13.3 6 X 2.5 sq. mm in 25mm conduit Metre 172.00 619.0 106468.00

291 PWD ELECT 2020 1.13.4 9 X 2.5 sq. mm in 32mm conduit Metre 238.00 365.0 86870.00

292 PWD ELECT 2020 1.13.5 12 X 2.5 sq. mm in 32mm conduit Metre 288.00 200.0 57600.00

293 PWD ELECT 2020 1.13.6 3 X 4 sq. mm in 25mm conduit Metre 145.00 86.0 12470.00

294 PWD ELECT 2020 1.13.7 3 X 6 sq. mm in 25mm conduit Metre 182.00 62.0 11284.00

295 PWD ELECT 2020 1.13.13 6 X 6 sq. mm in 32mm conduit Metre 312.00 145.0 45240.00

296 PWD ELECT 2020 1.13.14 6 X 10 sq. mm in 40mm conduit Metre 515.00 497.0 255955.00

297 PWD ELECT 2020 1.13.15 6 X 16 sq. mm in 50mm conduit Metre 772.00 270.0 208440.00

298 PWD ELECT 2020 1.15 Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5) 1.15.1 20 mm Metre 42.00 260.0 10920.00

301 PWD ELECT 2020 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. 5.4.3 Bell push Each 80.00 29 2320.00

302 PWD ELECT 2020 5.4.9 Fan regulator (two module size) electronic stepped type moving all rounds Each 223.00 232 51736.00

303 PWD ELECT 2020 5.4.12 Plug Top (Deluxe type) 3 pin 25 Amps (For power plug). Each 74.00 27 1998.00

304 PWD ELECT 2020 5.4.18 25/32 amp A.C. Starter switch Each 246.00 32 7872.00

305 PWD ELECT 2020 5.4.22 Batten/ angle holder Each 41.00 47 1927.00

306 PWD ELECT 2020 5.6 Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification. Each 816.00 81 66096.00

307 PWD ELECT 2020 5.7 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification. 5.7.2 Deluxe Each 107.00 20 2140.00

308 PWD ELECT 2020 5.9 Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as per specification. Each 42.00 232 9744.00

309 PWD ELECT 2020 6.1 Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. 6.1.3 1200 mm sweep Each 1697.00 175 296975.00

311 PWD ELECT 2020 6.5 Supplying and fixing of wall/ cabin fan including connection etc. as per specification. P.F. should be greater than 0.9 6.5.2 400 mm sweep Each 2043.00 1 2043.00

312 PWD ELECT 2020 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 6.6.1 300 mm sweep Each 2446.00 3 7338.00

313 PWD ELECT 2020 6.7 Supplying, installation, testing and commissioning of 250/ 300 mm sweep 1400 rpm medium duty (continuous running) exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 Each 1334.00 35 46690.00

314 PWD ELECT 2020 6.11 Supplying and fixing following sizes of down rod of 15/20mm dia M.S. pipe of thickness 2 mm to ceiling fan including painting with matching colour etc. as per specification. 6.11.1 45 cm long Each 31.00 87 2697.00

315 PWD ELECT 2020 6.11.2 60 cm long Each 40.00 9 360.00

316 PWD ELECT 2020 6.11.3 90 cm long Each 58.00 126 7308.00

317 PWD ELECT 2020 6.15 Supplying, installation, testing and commissioning of following LED fitting (luminaries) Panel Light in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.15.6 18/20 Watt Each 868.00 81 70308.00

318 PWD ELECT 2020 6.16 Supplying, installation, testing and commissioning of following sleek LED panel down lighters (luminaries) in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.16.1 24 watt, size 300 x 300mm Each 1775.00 77 136675.00

319 PWD ELECT 2020 6.19 Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.19.3 18/20 watt {4 feet} Each 443.00 256 113408.00

320 PWD ELECT 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 6.28.6 45 watt Each 2729.00 10 27290.00

323 PWD ELECT 2020 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu. 9.1.3 3 pole MCCB, 25-100A, Adjustable Thermal Release, 18KA Each 2385.00 14 33390.00

324 PWD ELECT 2020 9.1.1 3 pole MCCB, 25-63A, Fixed Thermal Release, 10KA Each 1483.00 2 2966.00

325 PWD ELECT 2020 9.1.4 3 pole MCCB, 100A, Adjustable Thermal - Magnetic Release, 25KA Each 3734.00 4 14936.00

326 PWD ELECT 2020 9.1.5 3 pole MCCB, 125A, Adjustable Thermal - Magnetic Release, 25KA Each 5740.00 2 11480.00

327 PWD ELECT 2020 9.1.7 3 pole MCCB, 200A, Adjustable Thermal - Magnetic Release, 25KA Each 9754.00 3 29262.00

328 PWD ELECT 2020 9.2 Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board of sheet steel phosphatized and powder painted complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) 9.2.6 8 way, Double door Each 946.00 2 1892.00

329 PWD ELECT 2020 9.4 Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) 9.4.4 4 way Double door Each 1716.00 5 8580.00

330 PWD ELECT 2020 9.4.5 6 way Double door Each 2038.00 7 14266.00

331 PWD ELECT 2020 9.4.6 8 way Double door Each 2547.00 9 22923.00

332 PWD ELECT 2020 9.6 Supplying and fixing on surface/ recess vertical type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, with 200 amps tinned copper busbar, common neutral link, earth bar, din bar, detachable gland/ knock out plate, provision for 63/100 amp MCCB as incomer including interconnection between incomer MCCB and busbars, earthing etc. as per specification. (But without MCCB and MCB) (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 9.6.4 4 way (4 + 12), Double door with provision for 100 amps MCCB as incomer Each 4587.00 5 22935.00

333 PWD ELECT 2020 9.6.5 8 way (4 + 24), Double door with provision for 100 amps MCCB as incomer Each 5322.00 1 5322.00

334 PWD ELECT 2020 9.10 Supplying and fixing SP MCB, 240 volts, 'B' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.10.1 6 amps to 32 amps Each 151.00 222 33522.00

335 PWD ELECT 2020 9.11 Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.11.2 6 amps to 32 amps Each 148.00 218 32264.00

336 PWD ELECT 2020 9.12 Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.12.2 6 amps to 32 amps Each 411.00 6 2466.00

338 PWD ELECT 2020 9.16 Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.16.3 40 amps Each 1275.00 13 16575.00

340 PWD ELECT 2020 7.6 Supplying and fixing metal clad busbar chamber made of 2.0 mm thick CRCA MS powder coated sheet with 4 strip aluminium alloy or wrought aluminium busbars of following capacity and length, complete with all accessories, including earthing the body etc. as per specification. 7.6.6 200 amps x 600mm long Each 2642.00 1 2642.00

341 PWD ELECT 2020 7.8 Supplying and fixing metal clad busbar chamber made of 2.0 mm thick CRCA MS powder coated sheet with 4 strip copper busbars of following capacity and length, complete with all accessories, including earthing the body etc. as per specification. 7.8.1 100 amps x 300mm long Each 1729.00 4 6916.00

342 PWD ELECT 2020 7.9 Providing and fixing metal clad, SP&N switch fuse unit (re-wirable), 230/250 volts, with porcelain re-wireble fuses including drilling holes on the board, connections, earthing the body etc. as per specification. (Thimbeling shall be paid separately). 7.9.1 32 amps Each 978.00 2 1956.00

343 PWD ELECT 2020 9.26 Supplying and fixing sheet steel enclosure of suitable size made of 1.6mm thick CRCA MS sheet, for 100 amps MCCB on existing metal board/ wall including painting etc as per specification. Each 434.00 7 3038.00

344 PWD ELECT 2020 11.1 Supplying, installation, testing and commissioning following rating single phase, 230 volts OFF-LINE UPS (sine wave) with built-in battery including connection as per specification. 11.1.2 1.00 KVA Each 4333.00 6 25998.00

345 PWD ELECT 2020 12.2 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 3734.00 4 14936.00

346 PWD ELECT 2020 12.14 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode at 0.5 Metre depth below ground level including excavation and refilling the trench etc. as per specification. Metre 345.00 56.0 19320.00

347 PWD ELECT 2020 12.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 3243.00 8 25944.00

348 PWD ELECT 2020 12.12 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering, excavation and refilling the trench etc. as per specification. Metre 36.00 22.0 792.00

349 PWD ELECT 2020 12.19 Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification: 12.19.2 With 2 metre long GI Pipes and 25 kg back filling compound. Each 8222.00 14 115108.00

350 PWD ELECT 2020 14.2 Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 14.2.1 63 mm outer dia Metre 124.00 1332.0 165168.00

351 PWD ELECT 2020 14.3 Supplying and laying following size medium class G.I. pipe in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 14.3.1 50 mm internal dia Metre 333.00 60.0 19980.00

352 PWD ELECT 2020 14.3.2 80 mm internal dia Metre 527.00 75.0 39525.00

353 PWD ELECT 2020 15.1 Supplying and laying following sizes one number FRLS PVC insulated/XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade direct in ground at a depth not less than 40 cm and upto 90 cm including excavtion, sand cushioning, protective covering and refilling the trench etc as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.1.15 3.5 x 95 sq. mm. Metre 488.00 110.0 53680.00

354 PWD ELECT 2020 15.3 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.3.15 3.5 x 95 sq. mm. Metre 295.00 50.0 14750.00

360 PWD ELECT 2020 15.5 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.5.12 3.5 x 35 sq. mm. Metre 158.00 10.0 1580.00

361 PWD ELECT 2020 15.6 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 25x3 mm M.S flat clamp and steel dash fastener/ G.I. bolts and nuts as per specification , IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.6.3 3.5 x 95 sq. mm. Metre 384.00 12.0 4608.00

362 PWD ELECT 2020 15.11 Supplying and hanging following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.11.18 4 x 10 sq. mm. on 8 SWG GI bearer wire Metre 128.00 50.0 6400.00

363 PWD ELECT 2020 15.11.19 4 x 16 sq. mm. on 8 SWG GI bearer wire Metre 136.00 50.0 6800.00

364 PWD ELECT 2020 15.23 Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. 15.23.13 3½ X 35 sq. mm (28 mm) Each 153.00 14 2142.00

369 PWD ELECT 2020 30.1 Earth work in all type soil except soft rock / hard rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling of excavated soil in trench / pit to ground level complete as per specification. cum 168.00 7.50 1260.00

370 PWD ELECT 2020 12.13 Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including soldering, excavation and refilling the trench etc. as per specification. Metre 94.00 60.0 5640.00

371 PWD ELECT 2020 24.20 Supplying of approved make Hiwall split Inverter type Air Conditioner unit with cooling unit (copper coil) and condensing unit (copper coil) including 5 years compressor warranty and standard length of upto 5 metre of copper piping with insulation etc complete as per specification: 24.20.9 2.0 Ton split type Inverter AC {5 Star} Each 55830.00 20 1116600.00

372 PWD ELECT 2020 24.4 Installation of split type Inverter/Non Inverter Air Conditioner unit, cooling unit on wall inside and condensing unit on out side wall/ ceiling/ floor at desired locations with existing standard length of copper piping with insulation and power cable including providing and fixing necessary good quality powder coated MS frame etc complete as per specification. (Extra length of copper piping and power cable shall be paid extra on linear basis) Each 2110.00 20 42200.00

373 PWD ELECT 2020 24.8 Dismentaling, Shifting, Re-installation, testing and commissioning of split type Air Conditioner unit with indoor and out door units and frames at desired locations with existing length of copper piping with insulation, necessary wiring with existing cable etc complete as per specification. Each 3149.00 2 6298.00

374 PWD ELECT 2020 24.17 Supply and filling up required quantity of R-22/R-32/R-410 refrigrent in existing window/ split air conditioners as per manufacturers specification including checking for leakage before and after filling, flushing the line with R-22/R-32/R-410 etc complete as per specification. 24.17.3 1.5 ton split type AC Each 940.00 1 940.00

375 PWD ELECT 2020 24.17.4 2.0 ton split type AC Each 993.00 1 993.00

376 PWD ELECT 2020 24.10 Supply, connecting and fixing extra length of copper piping for split type air conditioners of following dia and approved quality with insulation sleave etc complete as per specification 24.10.1 5/8 " Metre 375.00 190.0 71250.00

378 PWD ELECT 2020 24.11 Supplying and fixing good quality powder coated MS frame for installation of out door unit of split type Air Conditioner at desired location with atleast 6 nos steel fastners etc complete as per specification Set 435.00 20 8700.00

379 PWD ELECT 2020 25.53 All Control /communication wiring between indoor and Outdoor Units with FRLS PVC conduit and necessary clamps/saddling etc. complate as requird. Rmt. 203.00 185.0 37555.00

380 PWD ELECT 2020 25.54 400 mm Wide G.I. Tray Covered with G.I. Sheet for Copper Tubes. Rmt. 589.00 100.0 58900.00

381 PWD ELECT 2020 25.55 Supplying, laying, fixing and installation of rigid PVC drain piping of 6 KG/sqcm, duly insulated with 6/9 mm thick nitrile rubber pipe section, complte with all necessary fitting such as elbows, tees, reducers, serviceable "P" traps etc. and supports such as clamps etc. complate as per specifications. 25.55.1 25 MM DIA Rmt. 150.00 190.0 28500.00

382 PWD ELECT 2020 15.15 Supplying and laying following sizes one number FRLS PVC insulated, PVC sheathed, unarmoured, copper conductor control /power cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as per specification and IS: 694 (2010). 15.15.1 2 x 1.5 sq. mm Metre 106.00 210.0 22260.00

384 PWD ELECT 2020 6.23 Supplying, installation, testing and commissioning of following 230/250 volts LED Post Top Lantern fitting with perplex cover/decorative diffuser, electronic ballast and all other accessories on existing gate column/ pole bracket, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9 . LED chip efficacy ratio ≥ 100 lumens /watt. 6.23.1 25 Watt Each 2686.00 4 10744.00

385 PWD ELECT 2020 9.7 Supplying and fixing on surface/ recess prewired following way, 240 volts SP&N, MCB distribution board of sheet steel phosphatized and powder painted complete with loose wire box, terminal blocks, tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks including interconnections, earthing etc. as per specification. (But without MCB/ RCCB/ Isolator) 9.7.3 2 + 12 way, Single door Each 2314.00 1 2314.00

386 PWD ELECT 2020 10.13 Providing and fixing 3 pole, 415/500 volts following rating (AC-1 Duty) power contactor in existing starter/ cubical panel including, connections, testing and commissioning etc. as per specification. 10.13.4 100 amps Each 6774.00 3 20322.00

388 PWD ELECT 2020 10.15 Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.15.2 100/5 amps Each 349.00 9 3141.00

390 PWD ELECT 2020 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. Each 94.00 15 1410.00

391 PWD ELECT 2020 10.23 Providing and fixing panel mounting digital type VAF (Volt-amp-frequency combined) Multi Function meter of size 100x100 (NS) in existing cubical panel including connection, testing and commissioning etc. as per specification. Each 1201.00 5 6005.00

392 PWD ELECT 2020 12.5 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including soldering, excavation and refilling the trench etc. as per specification. Metre 513.00 12.0 6156.00

393 PWD ELECT 2020 12.18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ concealed conduit/ submain wiring/ cable as per specification. Metre 19.00 900.0 17100.00

394 PWD ELECT 2020 19.7 Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 20mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3) 19.7.2 7 metre high, dia 130mm at bottom and 90mm at top, base plate size 220x220x12mm, foundation bolts 700mm long Each 10938.00 22 240636.00

395 PWD ELECT 2020 19.11 Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification. 19.11.5 7 metre high Each 850.00 22 18700.00

396 PWD ELECT 2020 19.11.3 5 metre high Each 698.00 8 5584.00

397 PWD ELECT 2020 23.6 Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as per specification. 23.6.1 32 mm outer dia Metre 55.00 800 44000.00

398 PWD ELECT 2020 19.12 Designing and providing suitable RCC foundation in Cement Concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) for 3 mere to 12 metre high GI octagonal pole including steel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as per specification. cum 5219.00 18.86 98430.34

399 PWD ELECT 2020 19.25 Supplying and fixing of single over hang (Arm) 1000 MM (long)x50 mm dia decorative GI street light pole bracket made out of GI "A" Class pipe welded to 300 MM Long GI Pole canopy of suitable dia at angle of 102.50 Degree including having GI triangular stiffner and making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy including FRP Dome on existing pole etc. as per enclosed drawing and as per direction of engineer-in-charge. Each 1982.00 10 19820.00

400 PWD ELECT 2020 19.26 Supplying and fixing of double over hang (Arm) 1000 MM (long)x50 mm dia decorative GI street light pole bracket made out of GI "A" Class pipe welded to 300 MM Long GI Pole canopy of suitable dia at angle of 102.50 Degree including having GI triangular stiffner and making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy including FRP Dome on existing pole etc. as per enclosed drawing and as per direction of engineer-in-charge. Each 2752.00 12 33024.00

401 PWD ELECT 2020 23.14 Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010). Note: Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. 23.14.3 3x4.0 sqmm Metre 90.00 1132 101880.00

402 PWD ELECT 2020 6.22 Supplying, installation, testing and commissioning of following 230/250 volts LED BOLLARD fitting cool white/warm white {Colour Temperature 3000/4000/5600/6000 K} with electronic driver, heat sink, capacitor and all other accessories on existing foundation/ pole bracket, including connection, earthing etc complete as per specification. P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.22.1 9 watt Each 3612.00 54 195048.00

403 PWD ELECT 2020 30.2 Earth work in soft rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling with excavated soil in trench / pit to ground level complete as per specification cum 210.00 15.00 3150.00

404 PWD ELECT 2020 26.1 Suppying , installation , testing and commissioning of Fire alarm Control panel (UL Listed) suitable for 50 addressable points (Detector & Devices). Comprising of the following system components: Operating units, Periphery boards, Power supplies,System enclosures, with battery backup 24hours and 30minutes, Each 95892.00 2 191784.00

405 PWD ELECT 2020 26.9 Suppying , installation , testing and commissioning of Intelligent Addressable Multi-sensor Smoke detector: Multi-criteria addressable fire detector that incorporates photoelectric and thermal sensors,Polarity insensitive utilizing SureWireTM technology,Tri-color detector status LED with 360° viewing,Field-selectable application profiles,Superior EMI immunity, Remote sensitivity-measurement capability,Automatic environment compensation,UL Listed and ULC Listed; FM Approved. Each 2986.00 78 232908.00

406 PWD ELECT 2020 26.10 Suppying , installation , testing and commissioning of Intelligent Addressable Heat detector: Provides seven (7) field-selectable settings in the 135° í 174°F (57.2° í 78.9°C) temperature range ,Tri-color detector-status light-emitting diode (LED) with 360° viewing,Polarity insensitive utilizing SureWireTM technology,Superior EMI / RFI Immunity,UL521 Listed and ULC Listed; FM Approved. Each 2787.00 39 108693.00

407 PWD ELECT 2020 26.11 Suppying , installation , testing and commissioning of Intelligent Addressable Type Manual Call Point: Intelligent Manual Fire Alarm Box is constructed of durable, molded and polycarbonate material that is matte finished in red with raised white lettering Single-action,Pull-down lever is down, until manually reset,Polarity insensitive via SureWireTM technology Each 4317.00 5 21585.00

408 PWD ELECT 2020 26.13 Suppying , installation , testing and commissioning of Conventional Type Hooter with Strobe: Hooter with Strobe. Wall Mount models feature field selectable candela settings of 15/30/75/110cd and 135/185cd. Ceiling Mount models feature field selectable candela settings of 15/30/75/95cd and 115/177cd. UL Listed, ULC, FM approved. NFPA Compliant. Red. Each 5084.00 5 25420.00

409 PWD ELECT 2020 26.14 Suppying , installation , testing and commissioning of Response Indicator for above false ceiling detector Each 156.00 20 3120.00

410 PWD ELECT 2020 26.15 Suppying , installation , testing and commissioning of Intelligent Addressable Relay control module for Hooter Interfacing and supervising normally open (N.O) or normally closed (N.C) contacts,Integral single-pole, double-throw (SPDT) relay (up to 4 amps) ,Multi-color light-emitting diode (LED) indicates system status, UL Listed & ULC Listed; FM Approved Each 4277.00 5 21385.00

411 PWD ELECT 2020 15.13 Supplying and laying following sizes one number FRLS PVC insulated, PVC sheathed, steel armoured, copper conductor control /power cable of 1.1 KV grade in exiting PVC/ GI pipe etc as per specification and IS: 694 (2010). 15.13.1 2 x 1.5 sq. mm Metre 94.00 1260.0 118440.00

412 PWD ELECT 2020 26.17 Supply and erecting of following ISI marked Fire extenguishers on wall/ column including erecting bracket etc complete. 26.17.3 ABC Fire Extinguisher 4KG Nitrogen Store Pressure As per IS: 15683:2018 Body Sheet Not Less Then 2mm Thickness, CE Mark NRV Valve With ABC Powder 90% UL 299 FIRE RATING: 2A, 89B. With all accessories. Each 4091.00 15 61365.00

413 PWD ELECT 2020 26.17.6 CO2 type Fire Extinguisher ISI marked confirming to IS:15683:2018 Capacity 3Kg. INITIAL CHARGE:- Carbon dioxide used in extinguishers shall comply with IS 15222. FIRE RATING:- 34B. Complete with Hose Assembly and horn, locking arrangement, operation manual, bracket with two screw and sleeve Each 6386.00 3 19158.00

414 PWD ELECT 2020 28.13 Supplying , installation , Testing and Commissioning of Compact Full Range 4" Ceiling Speaker with 40 W RMS power @ 8 Ohms ,70 V/100V: 30 W / 15 W / 7.5 W with all necessery terminals and Connectors. Each 12839.00 6 77034.00

415 PWD ELECT 2020 28.15 Supplying , installation , Testing and Commissioning of Dual Channel Audio Amplifier Professional 1700-Watt (Per Channel 700 to 800 Watts into 4 Ohms OR Per channel 400 to 500 Watts into 8 Ohms OR 1600 to 2000 Watts into 8 Ohms (bridge mode)Stereo with all necessery terminals and Connectors. Each 35194.00 1 35194.00

416 PWD ELECT 2020 28.16 Supplying , installation , Testing and Commissioning of Mono Connectors Pin with all necessery terminals and Connectors. Each 630.00 10 6300.00

417 PWD ELECT 2020 28.17 Supplying , installation , Testing and Commissioning of RCA Connectors Pin with all necessery terminals and Connectors. Each 371.00 4 1484.00

418 PWD ELECT 2020 28.27 Supplying , installation , Testing and Commissioning of 17U Equipment Rack, with Metal Side Panel, Back Door, Front Glass Door, Floor Wheel, 15u PDU Unit, Cooling FAN, Cable Manager, Counter Shelf with all necessery terminals and Connectors. Each 30680.00 1 30680.00

419 PWD ELECT 2020 28.25 Supplying , installation , Testing and Commissioning of Heavy Microphone Cable AWG NOM Insulation Dia. Shield NOM NOM Conductor Center Inches mm Construction Jacket Dia. Capacitance Resistance Canductor (Min.) Inches mm (Pf / mtr.) Ohm / km (Max.) 24 AWG 0.053 1.35 80% 0.232 5.9 68(Cond. To Cond.) 91.1 with all necessery terminals and Connectors. Meter 468.00 45 21060.00

420 PWD ELECT 2020 28.29 Supplying , installation , Testing and Commissioning Cardioid Condenser Gooseneck Microphone with goosenck length of 415mm or more. Flexible gooseneck head for accurate positioning. Shock Mount to be inlcuded with Microphone from same OEM with Frequency Response 70 Hz - 16,000 Hz; It shall be capable of handling sound input levels up to 134 dB with a dynamic range of 106 dB. Nominal open-circuit output voltage shall be 12.0 mV at 1 V, 1 Pascal or better, Signal-to-noise ratio of 66dB,1kHz at 1Pa or better. Support 11V to 52V phantom power for operation. Impedance 100 ohms or better complete with Foam Windscreen with all necessery terminals and Connectors. Each 19376.00 2 38752.00

421 PWD ELECT 2020 28.41 Supplying , installation , Testing and Commissioning Wall Hanging Arrangement for Speaker Metal Wall Bracket with necessary accessories to mount the speakers on wall with all necessery terminals and Connectors. Each 5996.00 6 35976.00

422 PWD ELECT 2020 19.4 Supply of GI PIPE POLE made of "B" class GI pipe making necessary hole for cable entry and providing earthing stud (welded at specified height) including painting with one coat of red oxide zinc chromate primer. 19.4.3 80 mm dia Metre 632.00 40.0 25280.00

423 PWD ELECT 2020 19.5 Providing and welding M.S. base plate of size 300x300x3mm at bottom of GI/MS pipe pole. Each 166.00 8 1328.00

424 PWD ELECT 2020 13.1 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate having 4 nos holes for fixing etc. complete as per specification. Each 767.00 8 6136.00

425 PWD ELECT 2020 13.8 Making jointing of G.I. tape (with another G I tape, base of the finial or any other metallic object) by reverting, sweating and soldering/ nut bolting of as per specification. Each 42.00 32 1344.00

426 PWD ELECT 2020 13.9 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For horizontal run) Metre 48.00 120.0 5760.00

427 PWD ELECT 2020 13.10 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For vertical run) Metre 80.00 150.0 12000.00

428 PWD ELECT 2020 13.11 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as per specification. Each 54.00 10 540.00

429 PWD ELECT 2020 13.12 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as per specification. Metre 128.00 190.0 24320.00

430 PWD ELECT 2020 23.3 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. 23.3.2 1.5 HP, single phase Each 17589.00 4 70356.00

431 PWD ELECT 2020 23.7 Supplying and fixing of following sizes GM gate valve ISI mark in the suction/ delivery line etc. as per specification. 23.7.6 32 mm dia. Each 526.00 4 2104.00

432 PWD ELECT 2020 23.8 Supplying and fixing of following sizes GM non return valve ISI mark in the suction/ delivery line etc. as per specification. 23.8.6 32 mm dia. Each 623.00 4 2492.00

433 PWD ELECT 2020 23.11 Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set Each 4030.00 4 16120.00

434 PWD ELECT 2020 23.12 Supplying and fixing M.S. clamp 50 cm long made of 50mmx5mm thick M.S. Flat for holding the pipes and submerable pump set as per specification. Metre 291.00 4 1164.00

435 PWD ELECT 2020 23.16 Supplying and laying of approved make stainless steel wire rope of 6 mm dia for support of submersible pump set complete with tying to pump set and pump holding clamp. Metre 16.00 480.0 7680.00

436 PWD ELECT 2020 23.13 Supplying and fixing 300 mm dia 2 mm thick M.S. sheet cover with 3 cm edge in two past on tube well bore pipe as per specification Each 388.00 4 1552.00

437 PWD ELECT 2020 24.23 Supplying, installation, testing and commissiong of following size drinking water cooler storage type ISI marked, eco friendly non CFC refrigarant, water tank and cooler cabinet sheet material- stainless steel {grade AISI 304} with thickness>= 0.8 mm, with PUF insulation including all accessories connection etc complete as per specification. 24.23.2 60/120 Ltrs/hr Each 34581.00 4 138324.00

438 PWD ELECT 2020 24.24 Supplying, installation, testing and commissiong of following capacity of RO purification system with UF/UV/TDS controler and UV lamp {IS 14724 Ultra voilet disinfection} and minimum three stage purification, automatic on/off, output water conferming standard IS 10500 with inbuild storage tank including all accessories connection etc complete as per specification. 24.24.2 50 Ltrs/hr output capacity Each 39021.00 4 156084.00

439 PWD ELECT 2020 7.16 Providing and making interconnection in cubical panel between BBC and switchgears with following size aluminium strip of length upto 50cm as per specification (To be measured separately for each phase/ neutral). 7.16.1 20x5mm (100 amps) Each 78.00 18 1404.00

441 PWD ELECT 2020 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. 7.19.1 Upto 300 mm deep sqm 6818.00 1.5 10227.00

442 PWD ELECT 2020 7.19.2 Above 300 mm and upto 450 mm deep sqm 7525.00 3.00 22575.00

443 PWD ELECT 2020 7.20 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification. 7.20.1 100 amp (20x5mm) Metre 717.00 2.0 1434.00

445 PWD ELECT 2020 7.15 Providing and making interconnection in cubical panel between BBC and switchgears with following size FRLS PVC insulated aluminium conductor wire lead of length upto 50cm including providing aluminium thimbles on both ends as per specification (To be measured separately for each phase/ neutral). 7.15.1 10 sqmm (32 amp) Each 49.00 6 294.00

446 PWD ELECT 2020 7.15.2 25 sqmm (63 amp) Each 55.00 18 990.00

447 PWD ELECT 2020 7.15.3 50 sqmm (100 amps) Each 74.00 6 444.00

448 PWD ELECT 2020 7.15.4 70 sqmm (125 amps) Each 94.00 3 282.00

449 PWD ELECT 2020 10.8 Providing and fixing metal clad, TP&N motorized change over switch unit, 415/500 volts, including drilling holes on the board, connections, earthing the body, testing and commissioning etc. as per specification. 10.8.1 125 amps Each 26803.00 3 80409.00

451 PWD ELECT 2020 10.16 Providing and fixing single phasing preventer in existing panel including connection, testing and commissioning as per specification. Each 409.00 3 1227.00

452 PWD ELECT 2020 10.22 Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification. 10.22.1 Digital type Each 1901.00 1 1901.00

453 PWD ELECT 2020 10.22.3 Astronomical type with year programmed Each 3461.00 3 10383.00

454 PWD ELECT 2020 10.10 Providing and fixing metal clad, TP&N 415/500 volts, By Pass Switch Unit with sheet steel enclosure including drilling holes on the board, connections, earthing the body, testing and commissioning etc. as per specification. 10.10.2 200 amps Each 16695.00 1 16695.00

455 PWD ELECT 2020 12.11 Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as per specification. Metre 947.00 1.2 1136.40

456 PWD ELECT 2020 3.14 Supplying and drawing UTP 4 pair Cat 6 LAN wire in existing surface/ concealed Steel/FRLS PVC conduit as per specification metre 19.00 1125.0 21375.00

457 PWD ELECT 2020 11.3 Supplying, installation, testing and commissioning following rating single phase 230 volts sine wave inverter (without battery) including connection as per specification. 11.3.3 1.50 KVA Each 5504.00 1 5504.00

458 PWD ELECT 2020 11.4 Supplying, installation, testing and commissioning following rating (Sealed Maintenance Free) lead acid battery including connection as per specification. 11.4.5 150 AH Each 14252.00 2 28504.00

459 PWD ELECT 2020 27.19 Supplying , installation , testing and commissioning of 16 Channel NVR 2 Sata port Up to 16 channel IP camera input , Max 200Mbps incoming bandwidth ,Smart H.265+/H.265/Smart H.264+/H.264 dual codec decoding , Up to 8MP resolution preview and playback , Support 2 SATA HDDs up to 6 TB each, 2 USB(1 USB3.0, 1 USB2.0) , 1 HDMI / 1 VGA simultaneous video output ,ONVIF Version 2.4 conformance , Alarm In / out 4/2 , Two way talk 1 Channel Input, 1 Channel Output RCA , 1 RJ-45 port (10/100/1000Mbps) as per the specifications. Each 12252.00 2 24504.00

460 PWD ELECT 2020 27.28 Supplying , installation , testing and commissioning of 8 Port Managable PoE Switch 10/100/1000 8 Port with 2 Giga SFP uplink, L2 Managed PoE switch , Power Budget max 96 W , single port 30 W ,AI Extend , AI VLAN as per the specifications. Each 8959.00 2 17918.00

461 PWD ELECT 2020 27.38 Supplying , installation , testing and commissioning of 6 TB Surveillance Hard disk drive Complete as required Each 14590.00 2 29180.00

462 PWD ELECT 2020 27.49 Supplying, installation, testing and commissioing of following size LED Monitor, table/wall mount with inbuild speaker minimum 5Wx2,with minimum 1 No of HDMI and USB port including remote control, connecting cable, batteries, and all accessories, connection etc complete as per specification. 27.49.4 55 inch Each 63719.00 1 63719.00

464 PWD ELECT 2020 27.73 Supply, installation and testing for HDMI cable. Metre 462.00 65.0 30030.00

465 PWD ELECT 2020 Rate- Approved By S/E E/M Raipur (C.G.) Memo No- 2924 work-E/M Raipur 11/11/2025 Supplying, installation, testing and commissioning of Audio Visual CCTV 2MP (1920 x 1080 Pixel ) Bullet Camera (Supplying Network fixed 2MP Bullet Camera with inbuilt MIC, 50 Mtr)-- image sensor- 1/2.8"CMOS, Max. Resolution 1920(H)x1080(V), ROM-16 MB, RAM-64 MB, Scanning System- Progressive, Electronic Shutter Speed- Auto/Manual 1/3s-1/100,000s, Lens-Lens type Fixed-focal, Lens Mount M12, Focal Length -3.6mm; 6mm, Iris Control-Fixed, Video- Smart Codec-Smart H.265+/ Smart H.265+, Stream capability -2 streams, Bit Rate Control-CBR/VBR Day/Night-Auto (ICR)/Color/B/W,WDR-DWDR, Gain Control -Auto/Manual, privacy masking 4 areas, Audio-Built-in-mic yes, Audio compression G.711A; G.711Mu; G.726; PCM, Network RJ-45(10/100 Base-T),User/Host-6 (Total bandwidth:36 M), Management Software S-Smart PSS;DSS;DMSS Image Flip-Outputs max.2MP (1920x1080)@25/30 fps, H.265 codec, high compression rate ultra-low bit rate,. Built- in efficient IR illuminator, and the max. illumination distance is 50 m, Built-in-Mic, 12V DC/PoE power supply, IP67 protection nos 12293.00 15 184395.00

466 PWD ELECT 2020 Rate- Approved By S/E E/M Raipur (C.G.) Memo No-2924 work-E/M Raipur 11/11/2025 Supplying, installation, testing and commissioning of Audio Visual CCTV 2MP (1920x1080 Pixel) Dome Camera (Supplying Network fixed 2MP Dome Camera with inbuilt MIC, 30 Mtr) --Image sensor- 1/2.8"CMOS, Max. Resolution 1920(H)x1080(V), ROM-16 MB, RAM-64 MB, Scanning System- Progressive, Electronic Shutter Speed- Auto/Manual 1/3s-1/100,000s, S/N Ratio->56dB Lens-Lens type Fixed-focal, Lens Mount M12, Focal Length -2.8mm; 3.6mm, Max. Aperture-2.8 mm: F2.0 3.6mm: F2.0, Iris Control-Fixed, Video- Smart Codec-Smart H.265+/ Smart H.265+, Stream capability -2 streams, Bit Rate Control-CBR/VBR Day/Night-Auto (ICR)/Color/B/W,WDR-DWDR, Gain Control -Auto/Manual, Audio-Built-in-mic yes, Audio compression G.711A; G.711Mu; G.726; Network- Network port RJ-45 (10/100 Base-T),Storage- FTP, Mobile Client-ios; Android Cyber Security-Output max. 2MP (1920x1080)@25/30 fps, H.265 codec, high compression rate ultra-low bit rate,. Built- in efficient IR LED, and the max. illumination distance is 30 m, 12 V DC/PoE power supply. nos 11605.00 15 174075.00

Say In Rs 700.52 lacs

S.D.O P.W.D. Sub Division No-1 Balod Executive engineer P.W.D. Division Balod

Department Name Code SOR Name SOR UOM Name UOM Code false6329

Bastar Urban Public Transport Society (BSTUPTS) BSTUPTS ELECTRIC ELECT Percentage %

Bilaspur Urban Public Transport Society (BSPUPTS) BSPUPTS NON SOR NS Per mile %O

Chhattisgarh Department of Agriculture (CGDA) CGDA BRIDGE PWD_BRIDGE 1000 no. 1000 no.

Chhattisgarh Handicraft Board (CGHCB) CGHCB PWD BUILDLING PWD BLD 1000No. 1000No.

Chhattisgarh High Court, Bilaspur (CGHC) CGHC PWD ROAD PWD ROAD Siemens Per meter A/V

Chhattisgarh Housing Board (CGHB) CGHB Acre ACR

Chhattisgarh Infotech Promotion Society (CHiPS) CHiPS Activity unit AU

Chhattisgarh Medical Services Corporation Ltd. (CGMSC) CGMSC Bag BAG

Chhattisgarh Police Housing Corporation Ltd (CGPHC) CGPHC Book BK

Chhattisgarh Rajya Beej Evam Krishi Vikas Nigam (CGRBEKVN) CGRBEKVN Box BOX

Chhattisgarh State Civil Supplies Corp. Limited (SCSC) SCSC Gallons per hour (US) BPH

Chhattisgarh State Industrial Development Corporation (CSIDC) CSIDC Bottle BT

Chhattisgarh State Mandi Board (CGSMB) CGSMB Cubic sentimeter /second C3S

Chhattisgarh State Minor Forest Produce(Trading & Developme) Co-Operative Federation Ltd (CGMFPFED) CGMFPFED Canister CAN

Chhattisgarh State Power Distribution Company Limited (CGSPDCL) CGSPDCL Carton CAR

Chhattisgarh State Power Generation Company Limited (CGSPGCL) CGSPGCL Cubic Centimeter CCM

Chhattisgarh State Power Transmission Company Limited (CGSPTCL) CGSPTCL Cubic decimeter CD3

Chhattisgarh State Warehousing Corporation (CGSWC) CGSWC Centiliter CL

Chhattisgarh Text Book Corporation (CGTBC) CGTBC cm cm

Department of Animal Husbandry and Dairy (DAHD) DAHD Centimeter CM

Department of Home Guard and Civil Defence Chhattisgarh (HGCD) HGCD Square centimeter CM2

Department of Panchayat and Social Welfare (DPSW) DPSW Crate CRT

Department of School Education (DSE) DSE Case CS

Department of Technical Education (DTE) DTE Cu.Mtr. Cu.Mtr.

Directorate of Fisheries (DF) DF cum cum

Durg-Bhilai Urban Public Transport Society (DBUPTS) DBUPTS cum.km cum.km

Food and Drug Administration (FDA) FDA Days DAY

Health Department (HD) HD Degree DEG

Indira Gandhi Krishi Vishwavidyalaya (IGKV) IGKV DFLT DFLT

Korba Urban Public Transport Society (KRBAUPTS) KRBAUPTS Decimeter DM

Koriya Urban Public Transport Society (KRYAUPTS) KRYAUPTS Drum DR

Mineral Resources Department (MRD) MRD Dozen DZ

Naya Raipur Development Authority (NRDA) NRDA EACH EA

Panchayat and Rural Development (PARD) PARD each each

Public Health Engineering Department (PHED) PHED each additional floor each additional floor

Public Works Department (PWD) PWD each cut each cut

Raigarh Urban Public Transport Society (RIGUPTS) RIGUPTS each test each test

Raipur Collectorate (RC) RC each tree guard each tree guard

Raipur Development Authority (RDA) RDA each tree guard each tree guard

Raipur Urban Public Transport Society (RUPTS) RUPTS Enzyme Units / Milliliter EML

Rajnandgaon Urban Public Transport Society (RNDGUPTS) RNDGUPTS Enzyme Units EU

Rural Engineering Services (RES) RES Fluid Ounce US FOZ

Sarguja Urban Public Transport Society (SUPTS) SUPTS Feet FT

State Urban Development Agency (SUDA) SUDA Square foot FT2

Urban Administration and Development Department (UADD) UADD Cubic foot FT3

Water Resources Department (WRD) WRD Gigajoule FY

gram act.ingrd /liter G/L

Gram act.ingrd. GI

Gram /liter GLI

Gram /square meter GM2

Gram/Cubic meter GM3

Gallons per mile (US) GPM

hectare hectare

Joule /kilogram JKG

Kilogram act.ingrd KAI

Kilogram /cubic decimeter KD3

Kilogram/Mol KGM

Kilogram /Second KGS

Kilogram / cubic meter KGV

kg act.ingrd /kg KIK

Kilojoule/kilogram KJK

Kilojoule/Mol KJM

Square kilometer KM2

Kilometer/hour KMH

Kelvin/Minute KMN

Kelvin /Second KMS

Kilonewton per square meter KNM

Kilovoltampere KVA

Liter per 100 km LHK

Liter /Minute LMI

Liter /Molsecond LMS

Liter Per hour LPH

1/square meter M-2

Mol per cubic meter M:M

Megawatt hours M..

Meter /Hour M/H

Mol per liter M/L

Meter /second M/S

Square meter M2

Square meter/Coat M2C

Square meter/second M2S

Cubic meter /Hour M3H

Cubic meter/second M3S

Milligram/liter MGL

Milligram /cubic meter MGQ

Square mile MI2

Microsecond MIS

Milliliter act.ingr. MLI

Square millimeter MM2

Cubic millimeter MM3

Millinewton/meter MNM

Miles per gallon (UG) MPG

Millimol per liter MPL

Millipascal seconds MPS

Meter/second squared MS2

Microsiemens per centimeter MSC

Newton/meter NM

Newton/Square millimeter NMM

one RCC jaali tree guard one RCC jaali tree guard

one RCC jaali tree guard one RCC jaali tree guard

P.cumt. P.cumt.

P.Point P.Point

p.sq.mtr p.sq.mtr

P/sq.Mt. P/sq.Mt.

Pascal second PAS

Megavoltampere PCT

per cm height per letter per cm height per letter

per cm height per letter per cm height per letter

per cubic centimeter per cubic centimeter

Per Km. Per Km.

per letter per letter

Per mtr Per mtr

per pouch per pouch

per test per test

per tonne per tonne

per tonne capacity per tonne capacity

per.mtr per.mtr

Parts per billion PPB

Parts per million PPM

Parts per trillion PPT

Number of persons PRS

Pound Per Sq inch PSI

Pint, US liquid PT

Per Ton Per KM PTPK

Quart, US liquid QT

quintal quintal

Gramm/cubic centimeter RHO

RUNNING METRE RMT

Thousand Hours THR

Ton/Cubic meter TOM

DEFAULT UNIT DESCRIPTION XXX

Square Yard YD2

Microgram /liter µGL

Microgram /cubic meter µGQ

NAME OF WORK :- Construction of New Civil Court Building I/C. Water Supply, Sanitary Fittings, Boundary wall, Septic Tank, landscape, Vehicle shade, Tube well, C.C. Road & Electrification Works at Dondilohara Distt.- Balod (C.G.)

LIST OF APPROVED MATERIALS FOR ELECTRIFICATION WORK

S.No. Name of Item Make Remark

1 SWITCHES (Modular) 1. M.K.(Elements) 2. Hevell's (Febio) 3. Legrand (Myrious) 4.Schneider (Livia) 5. Anchor (Roma)

2 PVC Wires (Fire Ratardant) 1.5 Sqmm. / 2.5 Sqmm./4 Sqmm & 6 Sqmm. 1. RR cable 2. Polycab 3. KEI 4. Finolex

3 PVC Pipe & its accessories (a) 2 mm Thick for concealed wiring as well as for surface 1. Preciesion 2. BEC Plast 3.Plaza 4. Polycab

4 MCB/MCCB/DB 1. Schneider 2. L&T 3. Legrand 4.Havells 5 C&S 6. Standard

5 Armoured/Unarmoured Cable (Power Cable HD) 1. R.R. 2. Polycab 3. KEI 4. Finolex

6 Ceiling fan 1200 mm / 1400 mm 1.Bajaj, 2.Havell's, 3.CROMPTON 4.Orient 5. Polar Pazero

7 Fresh air Fan/Exahust fan 300mm/380.. 1. Bajaj 2. Crompton 3. Usha 4. Havells

8 LED light (luminaries) LED Bulb & LED Street light fitting & LED flood light 1. Bajaj 2. Crompton 3. Ledvance 4. Philips 5.Wipro, 6. Havells

9 Pump 1. Kirlosker 2. Crompton 3.CRI 4.Texmo

10 CCTV Camera 1. Bosch 2. Honeywell 3. Hikvision 4. Sony 5. CP Plus

11 Fire Alarm 1. Notifire 2. Detectomat 3. Honeywell 4. Edwards

12 Air Conditioners 1. Mitsubishi 2. Bluestar 3. Toshiba 4. Voltas 5. Daikin

13 RO 1. KENT 2. Aquaguard

14 Water Cooler 1. VOLTAS 2. Usha

15 Sound System 1. Bosch 2. Ahuja 3. Sennheiser 4. Studio master