Additional Civil Works Sukkampalayam

Amount

Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/U bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of truss made up of M.S.Angle and Steel tubular box section etc., complete complying with standard specfications and as directed by the departmental officers

Supply and fixing of UPVC Rain Water Gutter of approved design and drawing including clamping and all others works required to complete the job.The rate is inclusive of any other incidental charges such as labour charges,cost of all materials involved and as directed by the departmental officers

Supply and fixing of Stainless steel (Grade 304) water tank of 1000 litres capacity with shell thickness 0.60 mm complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes of 110mmm dia having a pressure of 4 kg. / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers

For One Floor

3 in 1 perforated chair of size 5'-6"x2'-1"x2'-6" seat height of 1'3" (NSTSCHR 1651) Specification - 3 in 1 perforated chair of size 5'-6"x2'-1"x2'-6" seat height of 1'3" Made out of 18G thick perforated chair seat and back powder coat and nickel chromium plating, 1.25mm sheet metal arm and leg nickal chromium plating. M.S Rectangular base support for 3 seater powder coated with GI bolt and nut fixed finish

Manufacturing and supply of executive ultima medium back revolving chair with cushion seat and back knitting and cloth finish (NSTSCHR 1350) Specification - Manufacturing and supply of executive ultima medium back revolving chair 5 Prong metal base nickel chromium plating finish with caster wheel & hydraulic lifting arrangement with 40mm moulded foam for cushion seat and back knitting and cloth with adjustable "T" handle finish

S' Type Visitor Chair with Cushion Seat and Sleek Knitted Mesh Back (NSTSCHR 1448)Specification - 'S' Type Visitor Chair with Cushion Seat and Sleek Knitted Mesh Back ; made out of 1" round pipe 16G chromium coated, sleek seated & back captul pipe frame with chromium coated, 13" P. U. arms, 20mm seat moulded foam, sleek fibre knitted mesh back finish

Executive Tansi Ultima high Back Revolving Chair (NSTSCHR 1443) Specification - 'Executive Tansi Ultima high Back Revolving Chair with cushion seat and knitted back with head rest. Made out of 5 Prong sheet metal chromium heavy base powder coat finish sincro tilting arrangement. Moulded knitted high Back Rest with Cushion head rest, adjustable Heavy type Handle, Plywood with 50mm moulded foam for seat, with Rexine/Upholstery Cloth finish)

U shape Conference Table of Size 49'-0"x2'-0"x2'-6" HT (NSTWTBL 2244) Specification - made out of 18mm, 12mm BWR Plywood as per IS:710, 12mm Flexible Plywood, 1.2mm Laminate Sheet Merino brand or its equal, all round Teak Wood Moulding, Foot Rest with good polish Finish

Special Type Chief Executive Table of size 7'-0"x4'-0"x2'-6" with Glass Top/Side Unit 6'-0"x1'-6"x2'-6" (NSTWTBL 1766) Specification - Manufacturing & Supply of Special Type Chief Executive Table of size 7'-0"x4'-0"x2'-6" made out of 18mm, 6mm commercial Plywood as per IS:303/1989, 0.8mm Laminate Sheet as per IS:2046, 6" SS Handles, 20", 16" Telescopic Channel, M.P Lock with storage Two Cupboards & Six Drawers with side Unit size of 6'-0"x1'-6"x2'-6" with 1" Edge Band Finish with 8mm Plain Glass Top

Modular Executive Table of Size 5'-0"x3'-0"x2'-6" (NSTWTBL 2040) Specification - Manufacturing & Supply of Modular Executive Table of Size 5'-0"x3'-0"x2'-6" made out of 18mm, 6mm commercial Plywood as per IS:303/1989, Fully Laminated by 1mm Laminate Sheet as per IS:2046, 2mm, 1mm Edge type with 3 Drawers on one side, One Drawer and Cupbord on another side with Lock, Handle arrangements Good Finish

Wooden Table 4'-0"x2'-0"x2'-6" Laminated Finish with one RH Drawer and Cupboard (NSTWTBL 1969) Specification - Wooden Table 4'-0"x2'-0"x2'-6" Laminated Finish with one Drawer and Cupboard made out of 18mm,6mm Commercial Plywood as per IS;303/1989, 1mm Laminate as per IS:2046, Lock, Handle , Telescopic Channel arrangements, 35x15mm Teakwood Beeding with Good Polish Finish

Premium Elite Plus Sofa 3 Seater 1, Single Seater 2 Numbers (NSTWSFA 1382) Specification - Manufacturing and Supply of Premium Elite Plus Sofa (3+1+1) - Made out of Silver Wood, Teak Wood Leg, 6mm Commercial Plywood as per IS:303/1989, 3", 1" Latex Rubber, 25mm, 1.50mm U Foam 40 density, with good Upholstry Cloth lining Finish

Wooden Side Rack of Size 36"x33"x18" having 3 Open Shelves (TWRCK 004) Specification - Made out of 18mm Commercial Plywood and 1mm Laminate sheet with Good Polish Finish.

Wooden Modular Four Seater WorkStation (NSWTBL 613) Specification - Manufacturing & Providing of Fixing of Wooden Modular Four Seater WorkStation made out of 19mm BWP Plywood & 11/2 height rasing Teakwood moulding design frame fixing & over that all side laminated finish with necessary marker sheet & etching glass & provide one side a drawer , Cupboard & Keyboard fixing wooden area with good sealer Polish Finish

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. Officials.) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere

M.R.Thangaraj (BID ID -1481901)

REALITY ENGINEERS (BID ID -1482467)