REP MAINT REPLACEMENT OF LT SWITCH GEARS, LT PANELS, CABLES AND CONNECTED WKS AT DUNKRIK LINE AREA AND INTERNAL ALUMINIUM WIRING WITH COPPER WIRING, MCBs PANEL BOX AT OFFRs/JCOs/ORs MD ACCN AT CENTRAL AREA UNDER AGE E/M-I AT GE (C) KHADKI.

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft loose soil.

Description all as per item No. 01 above but in soft/disintegrated rock complete all as specified and directed by Engr-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole / reconstruction old damaged copings etc, including necessary form work complete all as specified and directed.

Material and labour for stone dust for cousioning of UG cable/ at cable trenches inside substation bulding etc complete all as specified and directed by Engr-in-Charge.

Material and labour for brick protection with sub class 'B' brick for UG cable all as specified and directed.

Material and labour for road cutting upto 300mm deep and 200mm wide for crossing GI water pipe line through road including making good the disturbed surface by filling mass concrete complete all as specified and directed. NOTE :- Mass concrete will be measured and paid as saperate item.

Dismantling taking out carefully old/unserviceable UG cable any type any size from trenches / poles/ducts/LT panels after dismentling ends from OH conductors / MCCBs /joint boxes for relaying/refixing or carrying to store for Sch of Credit.

Materisl and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty XLPE U/G cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm 2 core with required aluminium cable lugs complete all as specified and directed by Engr-in-Charge.

Description all as per item No. 11 above but 10 sqmm 2 core complete all as specified and directed by Engr-in-Charge.

Description all as per item No. 11 above but 16sqmm 2 core complete all as specified and as directed.

Description all as per item No. 11 above but 10sqmm 4 core complete all as specified and as directed.

Description all as per item No. 11 above but 16sqmm 4 core complete all as specified and as directed.

Description all as per item No. 11 above but 25sqmm 3,5 core complete all as specified and as directed.

Description all as per item No. 11 above but 50sqmm 3.5 core complete all as specified and as directed.

Description all as per item No. 11 above but 70sqmm 3.5 core complete all as specified and as directed

Description all as per item No. 11 above but 95sqmm 3.5 core complete all as specified and as directed

Description all as per item No. 11 here-in-before but 120sqmm 3.5 core complete all as specified and as directed.

Dismentling taking out broken/worn out steel pole of 8.5 to 9.0 mtr long and keeping aside for refixing or carrying to store for credit

Material and labour for steel tubular swaged pole complete with cast iron base plate , finial taper plug bolts nuts and screws confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type 410 SP-31 (9 mtr long).

Dismantling and taking down old/unsv ACSR conductor any size complete for reuse at site or carrying to store for Sch of Credit all as specified and directed

Material and labour ACSR conductor incl jointing with existing conductor and straining on LT pole and proper fastening to pin/shackle insulators with aluminium binding wires and required jumpering connection all as dercted

Dismantling and taking down old/unsv cross arms, bracing, supports etc complete for reuse at site or carrying to store for sch of credit all as specified and directed.

Material and labour cross arms bracings supports clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paints complete all as specified and as directed.

Dismantling and taking down old/unsv insulator of any type any size from pole/stay for reuse at site or carrying to store for sch of credit complete all as specified and directed.

Material and labour pin type, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 100mm height and 65 mm dia for 1100 volts grade complete all as specified and as directed.

Material and labour shackle type, porcelian vitreous white, brown or green insulator including galvanised mild steel straps , washers, insulators bolts , washer and nuts of size 100 mm height and 115 mm dia for 1100 Volts grade complete all as specified and as directed.

Material and labour Loop type insulator, porcelian vitreous brown of size 65x90mm and clearence hole 16mm all as specified and directed.

Material and labour for stay assy using 16mm dia galvanised rod complete all as shown in electrical plate No 1 of SSR Part I incl dismentling unsv one all as specified and directed. (Clamps, loop insulator, earth work, PCC measured separately)

Material and labour for stay wire using galvanised steel strand of 7/3.15mm complete with necessary binding incl dismentling taking down unserviceable one all as specified and directed

Supply and fix cradle hexagonal /rectangular fabricated with galvanised steel wire not less than 4mm dia on pole incl dismentling taking out unsv cradle guard

Supply and fix earth continuity wire using GI wire not less than 4mm dia on pole incl dismentling taking out unsv GI wire

Material and labour for restraining of overhead ACSR conductor of any size of 4 wire 35-45 met span on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed.

Material and labour for restraining of ACSR conductor of any size of 2 wire 35-45 met span on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed.

Material and labour for restraining of GI Cradle guard hexagonal/rectangular of any size 35-45 met span on pole after disconnecting all binding on cross arms and redoing all bindings providing required T&P all as specified and directed.

Material and labour for restraining of GI earth wire of any size 35-45 met span on pole after disconnecting all binding on cross arms and redoing all bindings providing required T&P all as specified and directed.

Material and labour for earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion complete all as directed by Engineer-in-charge.

Cutting/Trimming of tree branches arround 3.00 met distance from conductors of LT over head line of span up to 40 meters including removing of creepers/vegitation etc fron poles

Cutting/Trimming of tree branches arround 3.00 met distance from conductors of HT over head line of span up to 50 meters including removing of creepers etc fron poles

Supply and fix sheet steel enclosure of size 40cmx30cmx40cm made out of 3mm thick MS sheet hinged door and locking arrangements and painting (inside and outside) with epoxy powder coated including fixing in position with the following accessories internally pre wired and testing complete all as directed. (a) Time switch, 240V, AC, base mounting, L & T – 01 No. (b) 3 pole power contactors, type ML-3 of L&T or equivalent – 01 No. (c) Toggle switch, single pole 2 way - 01 No. (d) bakelite base brass terminal connector block 8 way 40 amps cap-1 No, (e) MCB TPN 40 amps of Legrand/L&T-1No and fixed to pole/wall with clamp, nuts, bolts washers and testing complete incl dismentling taking down unserviceable switch fuse complete all as specified and directed.

Material and labour heat shrink end joint indoor/outdoor LT 1100 volts grade 10-16 sqmm, 4 core, make-Raychem, Cat No-EPKT0003 or equivelent of M-Seal/3M

Material and labour heat shrink end joint indoor/outdoor LT 1100 volts grade 25-50 sqmm, 3.5 core, make-Raychem, Cat No-EPKT0019 or equivelent of M-Seal/3M

Material and labour heat shrink end joint indoor/outdoor LT 1100 volts grade 70-150 sqmm, 3.5core, make-Raychem, Cat No-EPKT0035 or equivelent of M-Seal/3M

Material and labour heat shrink end joint indoor/outdoor LT 1100 volts grade 185-300 sqmm, 3.5 core, make-Raychem, Cat No-EPKT0051 or equivelent of M-Seal/3M

Material and labour heat shrink straight through joint out door type LT 1100 volts grade 10-16 sqmm, 4 core, make-Raychem, Cat No-EPKJ0123 or equivelent of M-Seal/3M

Material and labour heat shrink straight through joint outdoor type LT 1100 volts grade 25-50 sqmm, 3.5 core, make-Raychem, Cat No-EPKJ0130 or equivelent of M-Seal/3M

Material and labour heat shrink straight through joint outdoor type LT 1100 volts grade 70-150 sqmm, 3.5 core, make-Raychem, Cat No-EPKJ0137 or equivelent of M-Seal/3M

Material and labour heat shrink straight through joint outdoor type LT 1100 volts grade 185-300 sqmm, 3.5 core, make-Raychem, Cat No-EPKJ0144 or equivelent of M-Seal/3M

Painting of steel pole any type up to 7.5 mtr height above ground level including cross arms,clamps,stay clamps etc with two coats of aluminium paint after surface preparation all as directed by Engr-In-Charge

Numbering of HT/LT poles serially with letter/number size width and height up to 40 mm in site with white paint on black back ground

Material and labour GI tubing light grade 40mm bore,on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection including taking out old pipes all as specified and directed.

Material and labour GI tubing light grade 50mm bore on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection, ISI marked, for cable protection including taking out old pipes all as specified and directed.

Material and labour GI tubing light grade 80mm bore,on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection ISI marked, for cable protection including taking out old pipes complete all as specified and and directed.

Material and labour for jumper connections of length up to 1.50 met with existing size and guage of ACSR, binding with existing conductors for LT OH lines complete all as specified and and directed.

Material and labour for Danger notice plate of 1.6mm thick MS sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in singal red colour and fixed with MS clamps, bolts and nuts of approved size, for LT 1100 volts, 25 x 20 cm size including taking out defective danger boards complete all as specified and and directed.

Material and labour for Danger notice plate of 1.6mm thick MS sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in singal red colour and fixed with MS clamps, bolts and nuts of approved size, for HT 11000 volts, 25 x 20 cm size including taking out old danger boards all as specified and directed.

Supply and fix shock treatment chart duly printed with hindi and english fitted with wooden card board of size 100cmx60cm with hanging arrangement for installations complete all as specified and directed by Engr-in-charge.

Supply and errect Cast Iron HT/LT cable route indicator round shaped 120 mm dia 8 mm thick duly embossed with MES HT/LT Cable fixed on flat iron 25X3 mm thick 300 mm long and grouted in PCC (PCC measured separately)

Material and labour for rigid PVC line spacer, U-shaped, spriral type, suitable for 2 wire, made from high grade PVC material, distance between phase to phase 300mm, suitable for use with 1100 volts grade. MAKE :- Shree Balaji Power Plast/Goyal Power Plast

Material and labour for rigid PVC line spacer, U-shaped, spriral type, suitable for 4 wire, made from high grade PVC material, distance between phase to phase 300mm, suitable for use with 1100 volts grade. MAKE :- Shree Balaji Power Plast/Goyal Power Plast

Material and labour for aluminium cable lugs of size 50 sqmm flat head in Aluminium conductor/cable fixing with Nuts, bolts & washers to junction point as directed, (Note-To be measured only, fixed at places other than with heat shrink joints)

Material and labour for aluminium cable lugs suitable for XLPE cable size 70 sqmm flat head in Aluminium conductor/cable fixing with Nuts, bolts & washers to junction point as directed, (Note-To be measured only, fixed at places other than with heat shrink joints).

Material and labour for aluminium cable lugs suitable for XLPE cable size 95 sqmm flat head in Aluminium conductor/cable fixing with Nuts, bolts & washers to junction point as directed, (Note-To be measured only, fixed at places other than with heat shrink joints).

Material and labour for aluminium cable lugs suitable for XLPE cable size 120 sqmm flat head in Aluminium conductor/cable fixing with Nuts, bolts & washers to junction point as directed, (Note-To be measured only, fixed at places other than with heat shrink joints).

Material and labour for aluminium cable lugs suitable for XLPE cable size 150 sqmm flat head in Aluminium conductor/cable fixing with Nuts, bolts & washers to junction point as directed, (Note-To be measured only, fixed at places other than with heat shrink joints).

Material and labour for aluminium cable lugs suitable for XLPE cable size 240 sqmm flat head in Aluminium conductor/cable fixing with Nuts, bolts & washers to junction point as directed, (Note-To be measured only, fixed at places other than with heat shrink joints).

Material and labour for aluminium cable lugs suitable for XLPE cable size 300 sqmm flat head in Aluminium conductor/cable fixing with Nuts, bolts & washers to junction point as directed, (Note-To be measured only, fixed at places other than with heat shrink joints).

Material and labour for MCCB, 4 pole, 36 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 400 amps, incl dismentling taking down unsv one, make- Legrand or equivalent.

Material and labour for MCCB, 4 pole, 36 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 200 amps, incl dismentling taking down unsv one, make- Legrand or equivalent.

Material and labour for MCCB, 4 pole, 36 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 250 amps, incl dismentling taking down unsv one, make- Legrand or equivalent.

Material and labour for MCCB, 4 pole, 36 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 160 amps, incl dismentling taking down unsv one,make- Legrand or equivalent.

Material and labour for MCCB, 3 pole, 35 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 200 amps, incl dismentling taking down unsv one,make- Legrand or equivalent.

Material and labour for MCCB, 3 pole, 35 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 160 amps, incl dismentling taking down unsv one,make- Legrand or equivalent.

Material and labour for MCCB, 3 pole, 16 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 125 amps, incl dismentling taking down unsv one, make- Legrand or equivalent.

Material and labour for MCCB, 3 pole, 16 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 100 amps, incl dismentling taking down unsv one,make- Legrand or equivalent.

Material and labour for MCCB, 3 pole, 16 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 63 amps, incl dismentling taking down unsv one, make- Legrand or equivalent.

Material and labour for MCCB, 3 pole, 16 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 40 amps, incl dismentling taking down unsv one, make- Legrand or equivalent.

Supply and fix LED security fitting 90 watt with LED driver and lens complete with suitable size bracket made of GI Pipe Light grade,clamps,nut,bolt and washers, incl 1.5 sqmm three core copper flexible conductor cable from junction box of pole incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. MAKE :- CG Cat no: TRP-409-90-57-SL-GL-NSG or Equivalent in Philips/Wipro

Supply and fix LED security fitting 45 watt with LED driver and lens complete with suitable size bracket made of GI Pipe Light grade,clamps,nut,bolt and washers, incl 1.5 sqmm three core copper flexible conductor cable from junction box of pole incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. MAKE :- CG Cat no: TRP-409-45-57-SL-GL-NSG or Equivalent in Philips/Wipro.

Supply and fix LED flood light fitting 80 watt with LED driver and lens complete with all fittings incl 1.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. MAKE :- Wipro Cat no: LF20-122-060-57-G2 or Equivalent in Philips/Crompton Greaves.

Supply and fix LED post top lantern 40 watt complete with 40/50 mm GI Pipe Light grade,clamps,nut,bolt and washers, incl 1.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. MAKE :- CG Cat no: LPTC-40-CDL/WW or Equivalent in Philips/Wipro.

Supply and fix LED highbay light fitting 120 watt with aluminium PDC housing and toughend glass to ensure IP-66, with all fittings incl 1.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. MAKE :- Surya Cat no: SLE HB 120 W COMET NEO-N or Equivalent in Philips/Crompton Greaves.

Supply and fix LED building security light 20 watt, 230V with lens complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. MAKE :- CG Cat no: LSTS-20-CDL-M or Equivalent in Philips/Wipro

Material and labour for 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 10 sqmm and overall PVC sheathed in service connections from OH conductor to building incl dismentling taking down unserviceable one all as specified and directed.

Description all as per item No 86 above but size of cable 6 sqmm

Description all as per item No 86 above but size of cable 4 sqmm

Material and labour for scrapping existing deteriorated old paint by hard brush, painting the existing LT panel board by aluminium paint including handles minor parts complete and any other structural parts complete all as specified and diredted by Engr-in-Charge

Supply and fix outdoor distribution panel box CPRI type tested fabricated from ISO certified factory of overall size 750 mm (L) x 400 mm (B) x 1500 mm (H) made with 3 mm thick CRCA sheet with hinged door front & Rear for each cabinet powder coated by post office red and bottom black after anti-rust treatment of CRCA sheet. Top cabinet with incoming 3ph & N aluminium busbar of size 40x10mm chamber, Middle cabinet for mounting including MCCB 3 pole 125 amps - 1 No and for 3ph & N distribution aluminium busbar of of size 30x6mm and side cabinet for incoming cable tray. 2 Nos earth terminal, door lock for front and rear door with additional external locing arrangement, Door handle for each front & rear door, mounting stand made with ISA 40x6mm and 500mm long leg, duly painted with one coat of black bituminous paint , LT Danger notice board at front and rear. One MCCB of 25 KA, 125 amps, 3 pole between incoming and outgoing busbar as mentioned above and 2 Set of aluminium busbar as mentioned above with size. NOTE :- (i) The FPB shall be errected after dismentling taking out old unserviceable one. (ii) Disconnection of all cables from old FPB and reconnection of all cables to new FPB shall be done and rate shall be inclusive of the quoted rate. (iii) Panel shall be CPRI type tested and to be fabricated in ISO certified panel manufacturing factory - Panel Make- Success Engineers, Bhosari or equivalant

Labour for disconnecting LT cable of any size from structure/pole/transformer for finding fault , M&L for defect rectification LT cable laid in trenches or any location by locating fault with the help of electronic fault machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. The entire repair work to be completed with in 6 hours of instruction from Engr-in-charge as specified. Note:- Complaint will be notified to contractor on mobile phone at any time between 0800 to 2200 Hrs and has to be rectified with in 6 hours after notification, failing to which Rs 500/- per day complaint will be recovered. fault locating with electronic fault locator, excavation and earth work, disconnecting and reconnecting both end of cable, relaying of sand and protective cable covers are deemed to be included in the quoted rate all as specified and directed by Engr-in-charge. joint kit will be measured separately in appropriate item in this schedule

Design, fabricate, supply, testing and commissioning of factory made LT pannel board out door type fabricated out of 3 mm thick CRCA sheet for outer body double door and 2.00 mm thick CRCA sheet for inner partition walls, independent cabinet with cabinet doors for MCCB's ,Bus bars , cable trays,metering equipment vertical type,floor mounted,minimum IP-54 protection,suitably grouted to PCC with angle iron base frame 50x50x6mm complete with internal wiring,epoxy powder coated and connection of cable ends with suitable size of cable lugs with the following accessories. ( DRG to be got approved from the GE before the order is placed ) Contd to 93

Material and labour point wiring complete with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through and including DLP U-PVC Trunking system as per (legrand cat part No-030015) (minimum 32x12.5 mm) but shall be increased as per actual site requirement in accordance including trunking accessories like bends, tees, junction boxes, connectors etc fixed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including modular metal flush box with white/coloured top cover plate and frame of required modules for mounting of modular switches, sockets,bell push and fan regulators etc complete including dismentling / taking down old unserviceable wiring any type and making good to disturbed surfaces all as specified and as directed by Engineer-in-Charge. for One Light point / Fan / Ex Fan / Bell point controlled by one switch NOTE :- Cost of Mini trunking system alongwith connected accessories, & Metal flush boxes, top cover and frame plate shall be included in quated rate

Description all as per item No 94 above but, for one 3/5 pin socket outlet 5/6 Amps on the same board with other switches with cable of size 1.5 Sqmm nominal area.

Description all as per item No 94 above but for one 3/5 pin socket outlet 5/6 Amps independent board with cable 1.5 Sqmm nominal area.

Description all as per item No 94 above but for one 3/6 pin socket outlet 15 Amps on independent board with cable FRLSH 2.5 Sqmm nominal area.

Description all as per item No 94 above but for one 3/6 pin socket outlet 15 Amps on independent board with cable FRLSH 2.5 Sqmm nominal area for one light point controlled by two, two way switch

Supply and fix modular switch 1 way, 5/6 Amps, 1 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix modular switch 2 way, 5/6 Amps, 1 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix modular bell push, 5/6 Amps, 1/2 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix modular socket, 6/16 Amps, multi pin (ISI marked).complete all as specified and directed by Engr-in-Charge.

Supply and fix modular type fan regulator 100 Watt, 1/2 module complete all as specified and directed by Engr-in-Charge.

Supply and fix modular socket, 5/6 Amps, multi pin (ISI marked) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix modular switch 1 way, 16 Amps, 1 module (ISI marked) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix blanking plate -2 module complete all as specified and directed by Engr-in-Charge.

Supply and fix blanking plate -1 module complete all as specified and directed by Engr-in-Charge.

Material and labour for submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through in and including PVC conduit/casing caping with all fittings and accessories like bends, tees, junction boxes etc as required at site alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly incl dismentling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed by Engr-in-Charge. NOTE :- (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Description all as per item No 108 above but size of cable 2.5 sqmm all as specified and directed by Engr-in-Charge.

Description all as per item No 108 above but size of cable 4.0 sqmm all as specified and directed by Engr-in-Charge.

Description all as per item No 108 above but size of cable 6.0 sqmm all as specified and directed by Engr-in-Charge.

Description all as per item No 108 above but size of cable 10.0 sqmm all as specified and directed by Engr-in-Charge.

Material and labour for point wiring (casing/caping) complete with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through in and including PVC casing caping of required size with all fittings and accessories alongwith green colour FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, sockets, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc incl dismentling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed. for the One light point /fan/Ex fan/bell point controlled by one switch NOTE :- Cost of cutting / chasing on wall and making good after repair shall be included in quated rate.

Description all as per item No 113 above but, for one 3/5 pin socket outlet 5/6 Amps on the same board with other switches with cable of size 1.5 Sqmm nominal area

Description all as per item No 113 above but, for one 3/5 pin socket outlet 5/6 Amps independent board with cable 1.5 Sqmm nominal area

Description all as per item No 113 above but, for one 3/6 pin socket outlet 15/16 Amps on independent Board with cable of size 2.5 sqmm nominal area.

Description all as per item No 113 above but for one light point controlled by two, two way switch

Supply and fix 5 Amp switch Piano flush type single pole one way incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix 5 Amp switch piano type single pole two way incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix socket flush type, 2-in-1, 6 amps, 3/5 pin, 230v incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix bell push piano type one way 240 volt incl dismentling taking down unsv one . all as specified and directed by Engr-in-Charge.

Supply and fix lamp holder of PVC/ Polycarbonate type with back plate incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix call bell electric, ding dong, AC 240 volt, 50 HZ. incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix switch socket combination multipurpose 2-in-1 flush type 5 pin 6 amps, 230v incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix switch flush type 15/16 amps , 230v incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix flush type electronic fan regulator with 5 step type,100 W, AC 240 Volts, 50 Hz incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix ceiling rose surface PVC 65 x 50 mm three terminals incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix Sheet metal enclosure two way, incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge. MAKE : - Cat Part No-5077 91 to -5077 93 of Legrand or equivalent of Schneider/ABB.

Supply and fix Metal plug and socket board with MCB SP 16/20 amp, 16 KA incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge. MAKE :- Cat Part No- 5078 11 of Legrand or equivalent of Schneider/ABB

Labour for taking down old DBs of size (4 way/ 6 way/8 way/12 way) and repairing, cleaning and refixing of same and making good the disturbed surfaces neat and clean of all as specified and directed by Engr-in-Charge.

Supply and fix sheet metal enclosure SPN DB 02 way without bus bar, 240 Volts AC all as specified and directed by Engr-in-Charge of

Supply and fix sheet metal enclosure SPN 04 way (MCB DB) double door, 240 volts AC all as specified and directed by Engr-in-Charge

Supply and fix sheet metal enclosure SPN 08 way (MCB DB) Double door, 240 Volts AC all as specified and directed by Engr-in-Charge

Supply and fix sheet metal enclosure SPN 12 way (MCB DB) Double door, 240 Volts AC all as specified and directed by Engr-in-Charge

Supply and fix MCB DB double door 4 way ETPN as TPN incomer, 240 volts complete all as specified and directed by Engr-in-Charge.

Supply and fix vertical MCCB distribution board, as MCCB incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way incl dismentling taking down unsv one all as specified and directed by Engr-in-Charge.

Supply and fix MCCB 63 Amps, 4 Pole, 16 KA complete with connection, testing and commissioning all as specified and directed by Engr-in-Charge.

Supply and fix MCB TPN 25 to 63 Amps, 415 volt 10 KA complete with connection, testing and commissioning all as specified and directed by Engr-in-Charge.

Supply and fix MCB, SPN (DP) 40-63 amps, 240 Volts, 10 KA ‘’C” curve complete with connection, testing and commissioning all as specified and directed by Engr-in-Charge. MAKE :- Legrand Cat Part No-4086-09 to 4086-17 or equivalent of Schneider/ABB

Supply and fix MCB, SPN (DP) 6 to 32 amps, 240 Volts, 10 KA ‘’C” curve all as specified and directed by Engr-in-Charge. MAKE :- Legrand Cat Part No-4086-09 to 4086-17 or equivalent of Schneider/ABB

Supply and fix MCB, single pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed by Engr-in-Charge MAKE :- Legrand Cat Part No-4085-87 to 4085-95 or equivalent of Schneider/ABB

Supply and fix LED light batten 20 watt ,4 feet AC, PF-0.95 (min), sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge. MAKE :- Wipro cat part No LL20-281-XXX-65AL1 or equivalent in Surya/CG/Bajaj

Supply and fix LED light batten 10 watt, 2 feet AC, PF-0.95 (min), sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge. MAKE :- Wipro cat part No LL20-111-XXX-65NE3 or equivalent in Surya/CG/Bajaj

Supply and fix LED lamp 7 watt, CDL, B22/E27, 230V, PF-0.95 (min),complete all as specified and directed by Engr-in-Chargeas specified and directed by Engr-in-Charge . MAKE :- CG/Philips/Wipro

Supply and fix LED lamp 9 watt, CDL, B22/E27, 230V, PF-0.95 (min), complete all as specified and directed by Engr-in-Chargeas specified and directed by Engr-in-Charge. MAKE :- CG/Philips/Wipro

Supply and fix LED lamp 12 watt, CDL, B22 230V, PF-0.95 (min), complete all as specified and directed by Engr-in-Chargeas specified and directed by Engr-in-Charge. MAKE :- CG/Philips/Wipro

Supply and fix LED lamp 10 watt, inverter type complete all as specified and directed by Engr-in-Chargeas specified and directed by Engr-in-Charge. MAKE :- Halonix Cat Part No 10W B22 CW IP or equivalent in Philips/Wipro

Supply and fix industrial box type LED Batten with prewired suitable for LED tube 1 x 20 watt 4 feet long incl dismentling taking down unsv fitting any type all as specified and directed by Engr-in-Charge. MAKE :- CG/Philips/Wipro

Supply and fix LED glass tube rod 20 watt, 4' long with in built driver complete all as specified and directed by Engr-in-Charge. MAKE :- CG cat part No LGT8-20-865-2 or equivalent in Philips/Wipro

Supply and fix LED driver suitable for 18/25/36 LED Recess light including taking out defective driver any type complete all as specified and directed by Engr-in-Charges

Supply and fix LED building security light 20/25 watt, 230V, with lens, PF > 0.95 complete with all accessories and including connecting up to ceiling rose with three core copper flexible conductor cable, One GI medium grade 20/25mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed by Engr-in-Charge. MAKE :- Bajaj/CG/Surya

Supply and fixing of LED bulk head light fitting 10 Watt, IP66 protection with complete with all accessories and including connecting up with three core 0.75 sq mm cable complete all as specified and directed by Engineer-in-Charge. MAKE :- CG, Cat Part No LBHP-10-CDL or equivalent in Philips/Wipro

Material and labour for rewinding of ceiling fan 1200/1400 mm sweep after dismenting complete motor assy, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/turn of super enamelled copper wire, heating, vernishing, replacement of unsv bearings / bushings, assemble of rotor and stator unit with capacitor, connecting wire, down rod, blades and testing complete all as specified and directed by Engineer-in-Charge. NOTE :- 1. Contractor will collect fans from the complaint cells of specified area and bring back to complaint cell after repair. Cost of transportation will be inclusive of quoted rate. 2. Spares require for replacement such as bearing, Bushing, capacitor shall be measured and paid separately as Supply and fixing only. 3. Cost of Connector bock and capacitor holder shall be inclusive of the quoted rate.

Description all as per item No 155 above but, exhaust fan size 225/300mm sweep, metal body.

Supply and fix ball bearing No 6201/6202/6203/6204 of SKF/Tata/NBC.

Supply and fix capacitor AC for 230 volts 50 Hz of capacity 2.0/2.25/2.5 Mfd.

Supply and fix exhaust fan 250/300 mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300m incl making of suitable hole in brick / stone wall for fixing of Exhust Fan complete all as specified and directed by Engineer-in-Charge.

Painting of ceiling fan 1200/1400 mm including scrapping, cleaning and removing dust from the blade an body and applying two coat of enamel paint over & one coat of primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on complete all as specified and directed by Engineer-in-Charge.

Supply and fix PVC rectangular switch board of size 300mmx 250mm x 50mm incl necessary cutting slots for mounting switch, sockets, Regulator etc incl dismentling taking down unsv one all as specified and directed.

Supply and fix PVC rectangular switch board of size 200mmx 150mm x50mm incl necessary cutting slots for mounting switch, sockets, Regulator etc incl dismentling taking down unsv one all as specified and directed. MAKE :- Presto Teak/Press Fit.

Supply and fix PVC rectangular switch board of size 175mmx 100mm x50mm incl necessary cutting slots for mounting switch, sockets, Regulator etc incl dismentling taking down unsv one all as specified and directed. MAKE :- Presto Teak/Press Fit.

Supply and fix PVC rectangular switch board of size 100mmx 100mm x50mm incl necessary cutting slots for mounting switch sockets etc incl dismentling taking down unsv one all as specified and directed. MAKE :- Presto Teak/Press Fit.

Supply and fix hylam sheet 3mm thick on existing concealled MS/CI ractangular or Squar or round box with 04 nos cadmium coated screws and cup washer incl cutting slots for mounting switch/socket/fan regulator/ batten holder etc incl dismentling taking down unsv one complete all as specified and directed by Engr-in-Charge

Supply and fix PVC insulated PVC sheathed copper flexiable wire multistrand 4sqmm 3 core, ISI marked, complete all as specified and directed by Engr-in-Charge.

Supply and fix top plug 3 Pin 15/16 amps, 230 V complete all as specified and directed by Engr-in-Charge.

Supply and fix top plug 3 Pin 5/6 amps , 230v complete all as specified and directed by Engr-in-Charge.

Supply and fix non-integral flexible LED 25 watt with high brightness for indoor application with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismentling taking down unsv fitting any type all as specified and directed by Engr-in-Charge. MAKE :- Bajaj , Cat Part No BPLS 25W LED STRIP IP20 WW or equivalent in Wipro/Havells

Supply and fix LED driver suitable for non-integral flexible LED 25 watt incl dismentling taking down unsv one any type all as specified and directed by Engr-in-Charge. MAKE :- Bajaj , Cat Part No 25W LED STRIP DRIVER IP20 equivalent in Wipro/Havells

Material and labour for PVC insulated, PVC sheathed twin flat core 1100 volts grade, 2.5 sqmm aluminium stranded conductor (incl PVC conduit/wire guard where required) complete all as specified and directed by Engr-in-Charge.

Supply and fix wall light 15 watt, complete with all accessories and connecting up with three core copper cable from ceiling rose incl dismentling taking down unsv one complete all as specified and directed by Engr-in-Charge. MAKE :- Havells cat part No HLDL02160099 or equivalent to Wipro/ Philips

Supply and fix round shaped recess/surface mounted LED flat panel down lighter, 18 watt, (White/Warm white) suitable for POP celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type all as specified and directed by Engr-in-Charge. MAKE :- Wipro Cat Part No LD95-141-XXX-65-G1 or equivalent in Surya/Philips/Havells

Supply and fix recess mounted/Surface round LED down lighter, 9 watt, (White/Warm white) suitable for POP celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type all as specified and directed by Engr-in-Charge. MAKE :- Wipro Cat Part No LD80-350-XXX-60 or equivalent in Surya/Philips/Havells

Supply and fix recess mounted LED panel, 36 watt ( 2'x2'), highly efficient suitable for celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismentling taking down unsv fitting any type all as specified and directed by Engr-in-Charge. MAKE :- CG , Cat Part No CCR-127-36-57-SL-NWH/WW or equivalent in Bajaj/Havells/Surya

Supply and fix COB down lighter, 6 watt, (Warm white) suitable for POP celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type all as specified and directed by Engr-in-Charge. MAKE :- Wipro Cat Part No LD98-900-024-40-XX or equivalent in Philips/Havells/Surya

Supply and fix LED post top lantern 20 watt complete with 40/50 mm GI Pipe Light grade,clamps,nut,bolt and washers, incl 1.5 sqmm three core copper flexible conductor cable incl dismentling taking down unsv fitting any type complete all as specified and directed by Engr-in-Charge. MAKE :- Wipro Cat no: LP07-251-XXX-57-CL or Equivalent in Philips/Crompton Greaves/Surya.

Supply and fix LED rod 4 Pin, 18 watt suitable for recess mounted panel light all as specified and directed by Engr-in-Charge. MAKE :- Halonix , Cat Part No HLL-01-18-CW or equivalent in Philips/Havells/Wipro

Supply and fix for copper connection pipe 15mm dia 450mm long with brass union both ends suitable for Hot/Cold water for geyser complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair innner water container made of SS, vertical or horizontal type for 25/50 ltr capacity gyser complete all as specified and directed by Engr-in-Charge

Supply and fix in repair of aparatus plate suitable for vertical/horizintal type Geyser 25 to 50 ltr cap, complete all as specified and directed by Engr-in-Charge

Supply and fix in repair thermostate ISI marked suitable for geysers 25 Ltrs to 50 Ltrs Capacity, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair fusible plug marked suitable for 25 and 50 ltrs capacity Geysers,complete all as specified and directed by Engr-in-Charge

Supply and fix Fastener with bolt and screw of suitable size incl making of suitable hole in brick / stone wall for fixing of geyser complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair heating element marked round/triangular base, push type or thread type including rubber washers for 1.5/2.0 KW complete all as specified and directed by Engr-in-Charge

ONKAR ELECTRIC AND GENERAL STORE

JP ENTERPRISES