PREVENTIVE MAINT INCL INTERNAL AND EXTERNAL PAINTING TO WALLS, PAINTING TO WOODEN AND STEEL SURFACES, UPKEEP OF OFFR MD ACCN AND OTM ACCN AT VARANASI CANTT.

Amount

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, complete all as specified and directed .

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, and removing from site, complete all as specified and directed .

Taking down shutters of any description not exceeding 1.00 Sqm and removing from site, complete all as specified and directed .

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed .

S&F 2nd class hard wood factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters for door shutter supplying and fitted to chowkats, complete all as specified and directed .

S&F 2nd class hard wood factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply of size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick fitted to chowkats, complete all as specified and directed .

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory Made Solid panel PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 2mm thick consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC Sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets foor top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet bedding, and joined together with solvent cement, supplying & fixing in the frame at sitecomplete all as specified and directed.

M&L for Framed work conforming to Gde Fe-410-0 or Fe-250-0 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S & F Framed work such as grills,gratings etc with ends of bars shouldered and or riveted or forged into spikes ,framed guard bars barred iron doors ,ladders, framed balusters,walk ways, railings ,framework of water tanks and similar work conforming to Fe 290 Gde-E-165.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, with glazing bars , complete all as spfd and directed .

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, without glazing bars , complete all as spfd and directed .

S&F in repair 18 mm thick celuka ply of single side prelam/Rigidlam colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets complete all as specified and directed. (Density - 575 to 600 Kg/CBM) (Make Rajshri plastiwood or equivalent in make as specified in PS)

S&F in repair 12 mm thick celuka ply (PVC) of plain white(Matt finish) colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as specified and directed. (Density - 575 to 625 Kg/CBM) (Make Rajshri plastiwood or equivalent in make as specified in PS)

S&F auto closing hinges 35 mm of 0 crank(KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed. (Make- KAFF, Godrej & Hettich)

S&F magnetic catcher of size 20 mm X 50 mm suitable for cupboard shutter complete all as specified and directed.

Supply and fixing only 75 mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed.

Supply and Fixing only stainless steel basket (plain) of size 50cmx52.50cmx10cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/20 inch length two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed.

Supply and fixing only stainless steel Plate basket (11-13 division) of size 50cmx52.50cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/20 inch length two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed .

Supply and fixing only stainless cup and saucer basket of size 50cmx52.50cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed .

Supply only stainless steel Cutlary basket of size 50cmx52.50cmx10cm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18/20 inch length two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed

Supply and fixing only stainless steel bottle pullout of size 50cmx52.50cmx16cm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/20 inch length two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed

Supply and fixing only stainless steel glass basket (plain) of size 50cmx52.50cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/20 inch length two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed

Supply and fixing only stainless steel carouser basket (plain) of size 50cmx52.50 cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/20 inch length two way extruded MS galvanised over rollers for kitchen cabinets complete all as specified and directed.

Supply and fixing only Telescope basket (channel) 18/20 inch(45/50cm) length extruded MS galvanised over rollers of approved make complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed ,complete and all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed ,complete and all as specified and directed.

S&F 150 mm long alluminium tower bolt, complete and all as specified and directed

S&F in repair 150 mm long alluminium tower bolt, complete and all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete and all as specified and directed.

S&F in repair Aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete and all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed.

S&F Aluminium handles, anodised, 150mm size, oval type, stove enamelled black complete all as specified and directed .

S&F in repair Aluminium handles, anodised, 100mm size, oval type, stove enamelled black complete all as specified and directed .

Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises,complete all as spfd and directed .

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6, complete all as specified and directed .

M&L for Glazed ceramic coloured tiles 450X 300X 7mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

All as per item No. 40 above but as in vertical surfaces such as skirting/ dado over and including screed bed or bedding layer 10mm thick in CM (1:4) compelete all as specified and directed.

M&L for Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed .

M&L for Preparation of old wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed .

M&L for Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed .

M&L for Preparation of old steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed .

S&F of 3mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed .

S&F in repair of 3mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed .

S&F in repair 3 mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed .

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site ,complete all as specified and directed .

S&F of Steel tubes, 15 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed .

S&F in repair of 20mm bore ball valve with polyethylene float and fly nut high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F in repair 110mm PVC (SWR) bends with access door

S&F in repair 110mm PVC (SWR) bends any radius

S&F in repair 75mm PVC (SWR) bends any radius

S&F in repair 75mm PVC (SWR) bends any radius with access door.

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe.

-ditto- all as per item No. 60 above but 75mm.

S&F in repair Bib tap, cast copper alloy, fancy type, screwed down for high pressure screwed for 15mm bore pipe , complete all as specified and directed .

M&L in repair Vitreous china coloured wash down water closet pan (Padestal Pattern), , including connection to flush pipe, 'P' or 'S' trap, with fixing PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), complete all as specified and directed .

S&F in repair brass chromium plated 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and directed.

S&F in repair Health faucet brass body with 8 mm dia 1.00 m long flexible tube and wall hook including fixing complete all as specified and directed.

S&F in repair stainless steel toilet paper holder with flat recessed type complete all as specified and directed .

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair Corner glass shelf with brass chromium plated bracket fixed to wall complete all as specified and directed.

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair single lever sink mixer with table mounted with 235 mm long swivel spout and 450 mm long braided connection pipe fixed to iron pipe 15 mm bore complete all as specified and directed Make cera Cat Part No. F1016551 or equivalen.

S&F in repair vitreous china wall hung wash hand basin with full pedestal incl padustel white flat back size 515 x 430 x 110 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed

S&F in repair 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup) complete all as specified and directed Make : Cera cat Part No. F2008461 or equivalent.'

S&F in repair 15 mm bore Brass CP wall mixer for mixing hot & cold water (Telephonic type 1.5 Mtr long) screwed down for iron pipe and fixed complete all as specified and directed Make: cera Cat Part No. F1005402 or equivalent.

S&F in repair Brass chromium plated shower rose 125 mm size and fixed complete all as specified and directed

PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed

S&F in repair brass chromium plated Tumbler holder complete all as specified and directed.

S&F in repair SS soap dish complete all as specified and directed

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement

S&F in repair Kitchen rack plate of stainless steel of size 75 x 60cm all as per sample kept with GE office complete all as specified and directed.

S&F in repair Pillar tap, cast copper alloy, with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe 15mm bore, complete all as specified and directed .

S&F in repair 15mm bore stop /angle valve , cast copper alloy, screwed down, high pressure with crutch or butter fly han-dle, screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15mm bore stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or union , complete all as specified and directed .

S&F in repair of PVC, medium grade 32mm dia and 750mm long waste pipe, complete all as specified and directed .

S&F in repairs grating doom 125 mm dia with waste hole of PTMT (min weight 40 gms) complete all as specified and directed.

M&L in repair Vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, provn of lime concrete and jointing to flush pipe , complete all as specified and directed .

S&F in repair Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends , complete all as specified and directed .

S&F in repair Vitreous china, wash hand basin, (white) of size 550mmx400mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts, , chain and plug, porcelain stopper ,pvc connection 15mm dia 450mm long with brass CP nuts and washers at both ends, complete all as specified and directed .

S&F in repair CP 25 mm dia curtain rod fancy type including fancy type and CP brabs brackets, socket and knobs (wall to wall or flush to wall) for securing to curtain rod, complete all as specified and directed .

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth icl Preparing new plastered or unplastered surfaces of walls and applying two coats of Oil bound distemper smooth wall finish in approved colour/shade over a coat of primer over wall care putty after preparation of surfaces complete all as specified and directed.

M&L Rendering 10 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished even and smooth incl preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint smooth wall finish in approved colour/shade, over wall care putty after preparation of surfaces complete all as specfied and directed.

M&L Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even and smooth preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specfied and directed.

Complete removal of existing treatment by scrapping with machnical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.

M&L for Waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 1 mm over the New plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M&L for One coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&Lfor applying two coats of Oil Bound Distemper paint on prepared new/old palstered surfaces of walls using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M &L for Preparation of old decorated plastered surfaces of walls including cornices,pilaster etc by brooming down with steel wire brushing , scrapping down smoke soot,moulds , moss and efflorescent salts and greasy spots.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and prepaing old decorated plastered surfaces of wall including cornices, pilastered etc. and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including filling depressions of scrapped surfaces of wall including cornices, pilastered etc. and applying one coat of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and prepaing old decorated plastered surfaces of wall including cornices, pilastered etc. and applying two coats of cement base paint over wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and prepairing old decorated plastered surfaces of wall including cornices,pilastered etc. and applying two coats of Oil bond distemper over one coat of primer over wall care putty on wall surface complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling including filling depressions of scrapped surfaces of wall including cornices, pilastered etc. and applying one coat of white wash complete all as specified and directed.

Notes for all paintings works:- (a) The preparatory and application work pertaining to periodical services & water proofing shall be executed from authorized applicator duly certified by the manufacturer of the paint, distemper, putty etc. (b) The contractor shall obtain approval of the agency from GE within 10 days of the award of the contract and shall enter a Memorandum of understanding (MOU) with the manufacturer duly approved by GE. The copy of MOU shall be submitted to the department by the contractor with 20 days of the award of the contract. The execution of work shall only be commenced after the submission of MOU and necessary approval from the Engineer-in-Charge. MOU shall be valid during the currency of the work. However, during defect liability period if any defect is noticed the contractor shall only be responsible for rectification of the same.

Notes (Contd /....) (c) For work upto 12 mtr height, necessary scaffolding, props, jacks, shuttering & ladder shall be provided by the contractor. Green cloth shall be provided all around the work site for any position/ height with all other safety precautions (i.e. safety jacket, safety shoes, helmet, safety harness, safety goggles etc). Rate quoted by the contractor shall be inclusive of the above arrangement and nothing extra shall be admissible at later stage. The work shall only be commenced after the proper check of safety precautions by the Engineer-in-Charge. (d) Insurance for each worker shall be provided by the contractor and it shall be deemed to be included in the quoted rate. (e) Masking/ covering of window/ doors during spray painting using polythene film shall be deemed to be included in the quoted rate (f) No payment for additional height shall be paid to the contractor. (h) Completion of the work shall only be issued after proper cleaning of floors/mats and clearing of site has been done by the contractor all as per direction of Engr-in-Charge.

Usha Contractors and Engineers

M/S Akhilesh Enterprises

M/S SWATI CONSTRUCTION