REPAIR, PAINTING AND POLISHING OF WOODEN AND STEEL FURNITURE AND CONVERSION OF CHARPOY, GI PIPE NYLON NEWAR TO CHARPOY GI PLY TOP AT BSO (SOUTH), MIC and S AND CQA(V) UNDER GE(SOUTH) AHILYANAGAR

Amount

M&L for removing of userviceable 3 way elbow of GI charpoy and supply and fix new 3 way elbow 32mm dia, medium grade ISI marked weight not less than 450 Grams of each directed. FD-220

M&L for removing unserviceable check nut of GI charpoy and supply and fix new check nut 32mm dia all as directed . FD-220

M&L for removing of unserviceable long rail of GI charpoy and supply and fix new long rail 32mm medium grade, ISI marked of make TATA/Jindal/Swastik/Zenith including cutting, threaing at both ends and fixing all asspecified and as directed. FD-220

M&L for converting the unserviceable long rail obtained from item No 3.00 above into two short rail including cutting threading at both ends and fixing all as directed.

M&L for removing of unserviceable short rails of GI charpoy and converting the same in to two legs including cutting, threding at one end fixing all as directed. FD-220

M&L for removing of existing wornout newar of GI charpoy and reweaving the same with new 50/55mm wide nylon newar of vergin quality weighting not less than 1.50 Kg per charpy after tightening the loose components including provn of 3mm thick 50mm dia MS circular plate welded to the legs all as directed. Note : Reweaving shall be closely done on both side. FD-220

M&L for removing of unserviceable nylon newar from charpoy GI pipe, S&F commercial plywood of size 1980mm x 900mmx12mm thick BWR grade making with 06 Nos nut with bolt of 6mm dia 60mm long to be used for fixing of plywood top including drilling holes and following arrangement completed all as specified as directed by Engr-in-charge (a) S&F 3 Nos 25mm square MS hollow tube 16 guage wall thickness of length not less than 83.6cms each welded with fillet weld all around 3mm thick to long rails of GI pipe Charpoy at equal space to support plywood all as directed Notes : (i) All steel sections except GI articles and adjoining surfaces of GI pipe which shall be degalvanised during welding of MS hollow pipe shall be painted with two coats of synthetic enamel paint black over coat of red oxide primer. (ii) All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. (iii) The top of bolt (Head) for fixing of plywood shall be flushed with ply top & finished with suitable fitting. (iv) Legs of the charpoy to be welded with 3mm thick 50mm dia MS circular plate duly painted with two coats of synthetic enamel paint black over coat of red oxide primer. Make : Kitply, Greenply or Archid plywood or equivalent as approved by GE FD-220

M&L for removing unserviceable Square tube from Table dining ORs, Table clerk steel and Table office officer steel and S&F new square tube all as per directed by Engineer-in-charge. FD-165M

M&L for removing unserviceable top from table dining ORs and S&F new Top made out of 18/19mm particle board including cover of 22 mm guage aluminium sheet as per specification shown on drawing and as directed. FD-165M

M&L for removing unserviceable wooden parts from chair wooden bottom and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete. FD- 225, 285

Rear legs

Front legs

Front/side rails

Stiffners

M&L for removing unserviceable wooden parts from chair dining and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed.. FD-279/228/16M

Rear legs

Front legs

Rear/front/side rails

Stiffners

Back rest

M&L for removing unserviceable wooden parts from chair writing and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD-280, FD-250

Rear legs

Front legs

Rear/front/side rails/including cane hole

Stiffners

Back rest

Arms rest

M&L for removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD -229

Rear legs

Front/rear/rails including cane holes

Side rails for seat including cane holes

Front /rear/stiffeners

Side rails for back rest including cane hole

Upper /lower rails for back rest including cane

Arms rest

M&L for removing unserviceable plastic cane from chairs, bin soil linen and stool dressing and recanning with 2mm wide and canning boarder 3/4 wide cane all as specified and as directed. (Make of cane : Komal or equivalent as approved by GE) FD- 244, 229, 27M

M&L for removing unserviceable plywood from chair wooden bottom without arms and supply and fix new plywood seat 6mm thick commercial plywood to the existing chair WB without arms duly french polished as required and as directed. FD-225, 285

M&L for removing unserviceable wooden parts from table & Teapoys and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed.

Legs for table dining 6/8 pers FD-30, 273, 239, 232

Front/rear rails of table dining 6/8 pers FD-30, 273, 239, 232

Side rails for table dining 6/8 pers FD-30, 273, 239, 232

Centre rails of table dining 6/8 persons FD-30, 273, 239, 232

Leg of table 3'x2' without/ with drawer FD-283, 224

Front/rear rails of table 3'x2' without/ with drawers FD-283, 224

Side rails of table 3'x2' without/ with drawers FD-283, 224

Drawers of table 3'x2' FD-283, 224

Front /rear top/bottom rails of table writing FD-249, 275

Legs of table writing FD-249/275

Stiffeners of table writing FD-249/275

Side rails of table writing FD-249/275

Legs of table centre FD - 235, 274

Front/rear rails of table centre FD - 235, 274

Stiffeners of table centre FD - 235, 274

Bottom rails for table centre FD - 235, 274

Legs of table 2' x 2' FD-95M

Front/rear/side rail of table 2 x 2 FD-95M

Leg of table 3 x 3 HF-209

Front/rear/side rails of table 3 x 3 HF-209

Legs of table dining 4x3 FD-273

Side rails of table dining 4x3 FD-273

Legs of peg table FD-25, 236, 277

Bottom rail of peg table FD-25, 236, 277

Top rail of peg table FD-25, 236, 277

Leg of teapoy FD-34M, 232

Top rail of teapoy FD-34M, 232

Bottom rail of teapoy FD-34M, 232

M&L for removing unserviceable wooden parts from sofa set and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specied and as directed. FD- 281, 373

Legs of sofa chairs 70 x 35 x 30mm

Arms rest of sofa chairs 70X35X725mm

Wooden bearer 40X40X670mm

Wooden batten 50X20X670mm

Wooden rails 35X100X670mm

Wooden frame for head 70X35X600mm

Wooden rails to support back frame 30X50X670mm

Wooden bearer 40X40X1730mm

Wooden rail 35X100X1730mm

Wooden frame for back 70X35X1660mm

Sofa foam cushion of size 22x21x4 inches and density 40 and above all as specified and as directed. Make : Sleepwell or equivalent as approved by GE.

Cover sofa foam cushion 22x21x4 inches of make Bombay dyeing, D'Décor or equivalent as approved by GE.

M&L for removing unserviceable wooden parts from bed hard and supply and fix new wooden parts made out of Ist class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and as directed. FD-246 , 247

Short rails of bed hard

Long rails of bed hard

Stiffners of bed hard

Front leg of bed hard

Rear legs of bed hard

M&L for removing old unserviceable head rest from the bed hard/bed newar as per specifications and as shown in drawing all as specified and as directed. FD-246, 247

M&L for removing old unserviceable foot rest from the bed hard/bed newar as per specifications and as shown in drawings all as specified and as directed. FD-246 , 247

CHAIR SCHOOL WITH HAND BOARD - FD-E6/MAP/5

M&L for replacement of hand board of chair school of all as specified and as directed. Make : Godrej or equivalent as approved by GE.

M&L for replacement of seat of chair school all as specified and as directed Make : Godrej or equivalent as approved by GE.

M&L for preparation frame of school with hand board wherever required shall be welded and scrapping cleaning of frame of chair school with hand board broken/damaged & painting with one coat of synthetic enemel paint (black colour) all specified and as directed. FD/E6/MAP/5

M&L for removing of unserviceable plywood from bed hard and S&F new ply wood 12mm thick commercial all as specified and as directed. FD-247, 246 Make : Kitply/Green ply/Archid/Century as approved by GE

M&L for removing unserviceable drawer from the table dressing gents and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drawing and applying french polish as required all as specified and as directed. FD-230

M&L for removing unserviceable top frame of table dressing gents and S&F new top frame to the existing table dressing gents and applying french polish as required all as specified and shown on drawings. FD-230

M&L for removing unserviceable looking mirrior with frame from the table dressing gents and S&F new mirrior with frame to the existing table dressing gents with mirror and applying french polish as required all as specified and as directed. FD-230 Make of the mirror : Modi guard or equivalent as approved by GE

M&L for removing unserviceable back base ply from table dressing ladies with mirror and S&F new back base ply to the existing table dressing ladies with mirror duly french polished as required all as specified and as directed. Make of mirror : Modi guard or eqivalent as approved by GE. FD-32M, 251

M&L for removing broken unserviceable sliding glass shutter and aluminium channel and S&F new glass shutter and aluminium channel to the existing table dressing ladies all as specified and as directed. FD-32M, 251

M&L for removing unserviceable back from side board and S&F new 6mm thick plywood commercial of same size duly french polished as reqd all as specified and as directed. FD-26M, 241

M&L for removing unserviceable drawers from side board and S&F new drawers made out of 12mm commercial plywood of same size and applying french polish as reqd as directed. FD-26M, 241

M&L for removing unserviceable door shutter from side board and S&F new door shutter of 18/19mm thick prelaminated particle board one side teak face and other side white teak wood beading all around all as specified and as directed. FD-26M, 241

M&L for removing unserviceable knob from side board and S&F new knob with suitable screw all as specified and as directed.

M&L for removing unserviceable top from side board and S&F new top of size 19/18mm thick prelaminated particle board one side teak face and other side white all as per drawing all as specified and as directed. FD-26M, 241

M&L for spot welding of steel furniture items of broken joints etc, not exceeding 2.5cm in length and thickness 6mm including scraping, preparing the surface of welded portion by grinding and buffing to make fit for painting and applying two coats of synthetic enamel paint over a coat of red oxide on welded portion by sprayer complete . Note:- Make of paint shall be Apcolite by Asian paints or equivalent or as approved by GE.

M&L for removing the unserviceable tops from the following tables and S&F new tops made out of 18/19mm prelaminated particle board, one side teak finish and other side balancing white and fixing the same with the existing tables with suitable screw incl beading all around to the tops duly french polished as specified and as directed.

Table writing FD-249, 275

Table centre FD- 335, 274

Top for teapoy verandah FD-35M, 255

Table 600X600mm FD-95(M)

Table 3X3 HF-209

Table dining 4'x3' FD-273

Table peg FD-25, 236, 277

Teapoy FD-34, 232

Table dining 6 persons FD-30, 273, 239

Table dining 8 person FD-30, 273, 239

Table 3X2 without & with drawer FD-283, 231, 284

M&L for removing unserviceable hasp and staple 75mm chromium plated and fixing to steel shutter and locker bed side steel with suitable rivet/nut and bolt screw as shown on drawings all as specified and as directed. FD-1029, 257

M&L for removing unserviceable legs from locker bed side and S&F new legs made out of 1.00 mm thick black sheet and fixing to locker bedside steel with suitable welding the legs shall be painted with one coat of red oxide primer and two coats of synthetic enameled paint with match the existing all as specificied and and as directed. FD-1029, 257

M&L for removing unserviceable shutter of locker bedside and S&F new shutter to locker bedside steel and painted with two coats of red match with existing paint as shown on drawing all as specified and as directed

M&L for removing unserviceable handle from almirah large steel with shelves and providing new handle for almirah large steel and almirah medium steel with shelves as per specifications and shown on drawing all as specified and as directed. FD- 189M,

M&L for removing unserviceable locking device of Almirah large steel with shelves and Almirah med with shelves and providing new locking device including cover as per specification and shown on drawing and for directed. FD-189M

M&L for removing unserviceable lock from Almirah large steel with shelves and S&F new Godrej or equivalent lock with duplicate key all as specified and shown on drawing and as directed by Engr-in-charge. FD-189M

M&L for removing unserviceable shelves from Almira large steel with shelves and S&F new shelves for Almirah large steel with shelves made out of 1.00mm thik black sheet as per specified and shown on drawing all as specified and as directed. FD-189M

M&L for removing unserviceable legs from Almirah large steel with shelves and Almirah med steel with shelves and S&F new legs made out 0f 1.00MM thick black sheet as specified and shown on drawing all as specified and as directed. FD- 1032, 243

M&L for removing unserviceable clips and providing new clips to shelves of almirah large steel with shelves and med steel with shelves as specified and shown on drawing and as directed. FD- 1032, 243

M&L for removing unserviceable seat & back from chair CB steel with arms and supply and fix new seat and back for chair CB steel with arms duly painted for following :-

Seat of chair CB steel with arms FD-75M

Back of chair CB steel with arms

M&L for removing unserviceable seat & back from chair CB steel without arms and supply and fix new seat and back for chair CB steel without arms duly painted for following :- FD-75M

Seat of chair CB steel without arms

Back of chair CB steel without arms

M&L for removing old unserviceable seat from chair CBA spl and S&F new seat made out of 1st class hard wood Indian teak wood duly canned with 2MM plastic cane to the existing and as directed. FD- 75M

M&L for removing old unserviceable back of chair CBA spl and S&F new back of chair made out of 1st class hard wood Indian teak wood dulycanned with 2 MM plasticcane to the existing and directed . FD- 75M

M&L for removing unserviceable hand rest from chair CBA spl with hand rest made out of 1st class hard wood Indian teak wood as per size shown on drawing duly polished as specified and and as directed. FD- 75M

M&L for removing unserviceable plastic cane from chair verandah and recanning with 4/5mm half round plastic cane good quality including painting of chair verandah all as specified and as directed. FD-256, 19M Make of paint : Apcolite by asian paints (high glossy) or equivalent as approved by GE.

M&L labour for painting to the frame of form without back with one coat of synthetic enmal paint black to existing form without back all as per specification and shown on drawing. FD-77M

M&L for removing dent and bends of following steel furniture articles and applying two coats of synthetic enamel paint over a coat of red oxide primer by sprayer complete all as specified and as directed.

Almirah large steel with shelves FD- 189M

Almirah med/small with shelves FD-243, 1032

Locker bed side steel FD-1029, 257

Table with drawer steel FD-1008

Table office clerk steel FD-1004

Table office officer steel FD-1003

Table dining ORs FD-165M

Chair CB steel with arms FD-75(M)

Chair CB steel without arms FD-75(M)

Chair verandah steel with white paint FD-256

Chair CBA special FD-260

M&L for removing existing polish of following wooden furniture and applying melamine by Asian Paints /Nerolac/Berger paints strictly as per manufactures instructions all as specified and as directed. Note : Colour of polish shall be as approved by GE

Book shelf open small DB-1121

Book shelf open large FD-4121

Bed hard with ply top FD-246/ 247

Chair WB without arms FD-225/285/56

Chair writing FD-280/ 250

Chair dining FD-279/ 16M/ 228

Chair easy FD-229

Sofa set 4 seater FD-281, 373

Sofa set 5 seater FD-281, 373

Table centre FD-29, 235

Table peg FD-25, 236, 277

Table dining 6 person FD-239, 30, 273

Teapoy FD-34, 232

Table bed side FD-248

Table dressing Gents with mirror FD- 230

Table dressing ladies with mirror FD-251, 32

Table writing FD-249, 275M

Table dining 8 pers FD-30, 273, 239

Bin soil linen FD-244

Side Board FD-241

Stool dressing CB FD-282

Removing unserviceable plastic cane from seat of chair dining and supply and fix new 4mm thick PVC seat complete all as directed. (FD-279/228/16M)

Removing unserviceable plastic cane from seat and back of chair verandah and supply and fix new 4mm thick PVC seat and back set complete all as directed. (FD/ MAP-II/15, FD-19, FD-359, FD- 256)

KAMINS CARE (BID ID -3504840)

R. T. Saluji (BID ID -3505114)

SARGAM ENTERPRISES (BID ID -3510803)

Mahesh Traders (BID ID -3510381)