SMART PERIODICAL SERVICES OF BUILDING INCLUDING CLEANING OF OHT/SWT TO DOMESTIC AREA AT AFS AMLA

Amount

M&L for complete removal and preparation of old decorated treatment on wall (external/internal) and ceiling finishes by scrapping with trucare wall sander L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7''/9'' to make the surface free from dust, loose paint etc., or equivalent makes viz Xpress sanding machine having suction vacuum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and algae and fungus on the wall to be removed by using high pressure wash coir or brush and shall be treated with fungicidal solution, all surface cracks upto 5 mm width should be filled up with Dr Fixit Crack-X-paste. Cracks more than 5 mm and all separation gaps should be filled up with Dr Fixit pidicrete URP modified mortar or as specified complete all as specified and directed.

M & L for waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 2 mm over the plastered /old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as pere following step: - Step 1 : Mix the putty powder by adding water as per manufacturers instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute. Step 2 : Apply the first cost the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with maximum pressure 3300 PSI. Step 3: Allow 6-8 hours time to dry the putty surface.

M&L for one coat of acrylic water based interior/exterior grade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed.

M&L for preparation of old/ new decorated surface treatment on wall/ ceiling and applying two coats of oil bound emulsion distemper coverage 8-10 sqm /ltr of approved tint on prepared surfaces as per approved manufacturer's instruction complete all as specified and directed.

M&L for applying two coats of anti fungal weather proof grade exterior acrylic emulsion paint of approved tint with crack filling upto 5 bars of positive hydrostatic pressure on verticle walls without any dilution with forced coverage not more than 3.5 sqm/ ltr as per manufacturer's instructions and all coats to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed. Make : Apex Ultima Protek Asian paints paints/ Nerolac excel top guards/ Berger weather coat long life 10

Note for item No. 1 to 5 :- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :- (i) All painting works shall be got executed through original materials manufacturing company or their authorised applicators as approved by GE and contractor should submit MOU with the manufacturing company or their authorised applicators before execution of work and entire work shall be executed with the approved firm. (ii) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (iii) Contractor shall give guarantee from OEM of 5 years for effectiveness of painting carried out by them from the certified date of completion of work.

(iv) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (v) Removing of Nails, making good holes, cracks etc (vi) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (vii) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (vii) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (ix) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc including all necessary scaffolding arrangments of any hieght complete all as directed.

Material and labour for rendering 10 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L (10+5)mm thick for rendering fair faces of brick work or Concrete surface in two coats 10mm thick in CM(1:6) as under coat 5mm thick CM (1:4) as finishing coat in two separate layer mixed with or without liquid waterproofing compound @ 200ml per bag of cement finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid seperately.

Supply only liquid water proofing compound

M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat alkali resistant priming paint complete including filling cracks with wall care putty wherever necessary complete all as specified & directed.

M & L for preparing newly plastered surfaces of walls and applying two coats distemper oil emulsion paint over one coat of chalk white primer complete including filling cracks with wall care putty wherever necessary complete all as specified & directed.

M & L for preparing newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified

M& L for preparing of old external decorative surface of walls and applying one coat of cement base paint, including cracks filling with exterior wall care putty where ever necessary and as specified and directed.

M& L for preparing of old decorative surface of walls and applying one coat of white wash on walls including cornices etc complete with cracks filling with wall care putty where ever necessary and as specified and directed.

M & L for preparing of old decorative surface of ceilings and applying one coat of white wash on ceiling including cornices etc complete including filling cracks with wall care putty wherever necessary complete all as specified & directed.

M & L for preparing of old decorative distempered internal surface of walls and applying one coat of distemper oil emultion complete including filling cracks with wall care putty wherever necessary complete all as specified & directed.

M & L for preparing of old decorative distempered internal surface of ceiling and applying one coat of distemper oil emultion complete including filling cracks with wall care putty wherever necessary complete all as specified & directed.

M & L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M & L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M & L for preparation of old painted plastered surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint including cracks filling with exterior wall care putty where ever necessary complete all as specified & directed.

M & L for cleaning/washing & rubbing down inner portion complete (Bottom and sides) with wire brush for removing all scale and dirt etc tanks and also mouth of circulating pipes etc and again cleaning complete applying with bleaching powder for disinfection to the entire satisfaction of EIC for capacity of water storage tank ecx 250 ltrs but n.exc 500 ltrs. Note: Cost of Writing (date of cleaning and next due date) in suitable portion of water tank or as direction, with synthetic enamel paint, is deemed to include in this item complete all as specified and directed.

M & L for cleaning/washing & rubbing down inner portion complete (Bottom and sides) with wire brush for removing all scale and dirt etc tanks and also mouth of circulating pipes etc and again cleaning complete applying with bleaching powder for disinfectin to the entire satisfaction of EIC for capacity of water storage tank exc 500 ltrs but n.exc 1000 ltrs. Note: Cost of wirting (date of cleaning and next due date) in suitable portion of water tank or as directed, with synthetic enamle paint, is deemed to include in this item complete all as specified and directed.

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

GOVIND CONSTRUCTION (BID ID -3191997)

M/s Vinod Yadav (BID ID -3184624)