PROVN OF 01 X COVERED SHED FOR HAY STORAGE IN FARM AREA OF EBS BABUGARH AND PROVN OF HARD STANDING FOR VEHICLE AT DOZER REPAIR GP OF 510 ABW UNDER AGE B/R-II OF GE (NORTH) MEERUT CANTT

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed

S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

S & F TMT bars 5mm dia & over upto and 10mm dia in stirrups spacers & binders etc complete all as specified and directed.

M&L RCC M-25 (20mm graded aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified and directed.

M&L RCC M-25 (20mm graded aggregate) for columns, pillars, pierrs, posts & struts etc complete all as specified and directed.

M&L RCC M-25 (20mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter complete all as specified and directed.

M&L form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape complete all as specified and directed.

M&L flat form work to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 5.0KM and forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and directed.

M&L, Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete all as specified and directed.

M&L cement concrete 1:4:8, type D2(40mm graded stone aggregate) as in 75mm thick sub base complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-2 using (40mm graded stone aggragate) as in floor finishing the surface even and fair with out using extra cement complete all as specified and directed.

M&L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finsihed even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6, surface finsihed even and smooth without using extra cement complete all as specified and directed.

M& L for preparing plastered new surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, MS pipes or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 GDE Fe 165 complete all as specified and directed.

S & F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

S & F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

M & L for cement concrete 1:3:6 type C2 (40mm graded aggregate) as in 75mm thick for plinth protection complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping, bed block, kneels, apex stones etc including weathering slightly rounded or chamfered including form work complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Surface dressing n exc 15 cm deep soft and loose soil complete all as specified and directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less all as specified and directed

S &F for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 100 mm thick concrete slab complete all as specified and directed.

S & F for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘A’ complete all as specified and directed.

Finishing surface of concrete roads, pavements,brooming complete all as specified and directed

Deepak Kumar Gupta (BID ID -3445634)

High Tech Metal India (BID ID -3435926)