REPAIR/MAINT TO INTERNAL WIRING, FITTING/ FIXTURES IN MD OTM BUILDINGS AND CONNECTED ITEMS IN OFFR MD ACCOMODATION, CENTRAL AMENITIES, FD REGT UNDER GE DIPATOLI

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down old/unserviceable MCB DB SPN any capacity by disconnection of electric connection including MCBs, Isolators, etc and making good to disturbed surface, complete all as specified and directed.

Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs, MCBs, isolators etc and making good to distrubed surface, complete all as specified and directed.

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn through PVC conealed conduit 20/25 mm dia on wall/ceiling, including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes, cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note : The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box, cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces, complete all as specified and directed.

All as per Ser item No 5 here-in-before but one 3 Pin Socket out let 5 Amps on the same board, complete all as specified and directed.

All as per Ser item No 5 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board, complete all as specified and directed.

All as per Ser item No 5 here-in-before but one bell/buzzer point controlled by one push button on the independent board, complete all as specified and directed.

All as per Ser item No.5 here - in - before but one light point controlled by two way switches with wire 1.5 Sqmm size, complete all as specified and directed.

All as per Ser item No 5 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly, complete all as specified and directed.

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn through PVC Casing caping 20/25 mm on wall/ceiling, including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes, cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note : The rate quoted is deemed to be included for Phenolic sheet (Hylem) and steel terminal box, cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 11 here-in-before but one 3 Pin Socket out let 5 Amps on the same board, complete all as specified and directed.

All as per Ser item No 11 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board, complete all as specified and directed.

All as per Ser item No 11 here-in-before but one bell/buzzer point controlled by one push button on the independent board, complete all as specified and directed.

All as per Ser item No.11 here - in - before but one light point controlled by two way switches with wire 1.5 Sqmm size, complete all as specified and directed.

All as per Ser item No 11 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly, complete all as specified and directed.

S&F Switch Piano type 2 way switch 5 amp 230 v complete all as specified and directed at Site, complete all as specified and directed.

Supply and fix Switch Piano type, single pole, one way 5 Amp, complete all as specified and directed.

S&F Switch piano type, single pole, one way 15 Amps, complete all as specified and directed.

S&F Socket out let 2-in-1 2/3 pin 5 Amps, complete all as specified and directed.

S&F Socket outlet 2-in-1, 3 pin, 5 and 15 amps, flush type, complete all as specified and directed.

S&F in replacement electric Bell, ding dong type AC 230 Volt single pole, complete all as specified and directed

S&F in replacement Bell push 5 Amps for electric Bell/Buzzer, AC 230 Volt single pole, complete all as specified and directed.

S&F Ceiling rose, 3 terminal PVC/polycarbonate, complete all as specified and directed.

S&F electronic regulator step type 230 Volts single phase 120 watt, complete all as specified and directed.

M&L for lamp holder, PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed

Supply and Fix modular switch one way 6 Amp 240 volts one module complete all as specified and directed

Supply and Fix modular switch two way 6 Amp 240 volts one module complete all as specified and directed

Supply and Fix modular bell push switch one way 5 Amp 240 volts one module complete all as specified and directed.

Supply and Fix modular switch one way 16 Amp 240 volts one module complete all as specified and directed.

Supply and Fix socket modular one way 6 amp 240 volts two module complete all as specified and directed

Supply and Fix socket modular one way 16 amp 240 volts two module complete all as specified and directed

Supply & Fix TV socket modular one module, complete all as specified and directed

Supply & Fix Telephone socket modular one module, complete all as specified and directed

Supply & Fix regulator modular step type one way 220 volt two module, complete all as specified and directed.

Supply and fix in replacement of modular USB Charger, complete all as specified and directed

Supply and fix in replacement Blanking Plates for covering of MCB DB open space, complete all as specified and directed

Supply and fix in replacement switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type as per existing model and size complete all as specified and directed.

Supply and fix in replacement switch socket combination 2 in 1 3 pin 5 Amps flush type as per existing model and size complete all as specified and directed.

S&F in replacement of sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps to 32 Amps complete all as specified and directed.

M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor, PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly, complete all as specified and directed. Note:- (i) all three wire (Phase red colour, neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No-41 here-in-before but 2x2.5 Sqmm and 1x 2.5 Sqmm for Earth wire

All as per ser item No-41 here-in-before but 2x4 Sqmm and 1x 4.0 Sqmm for Earth wire

All as per ser item No-41 here-in-before but 2x 6 Sqmm and 1x 6.0 Sqmm for Earth wire

M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor FR PVC insulated and unsheathed FRLSH cable 1100 Volts grade, drawn in with and including PVC casing / caping 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly, complete all as specified and directed. Note:- (i) all three wire (Phase red colour, neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No 45 here-in-before but 2x2.5 Sqmm and 1x 2.5 Sqmm for Earth wire

All as per ser item No 45 here-in-before but 2x4 Sqmm and 1x 4.0 Sqmm for Earth wire

All as per ser item No 45 here-in-before but 2x 6 Sqmm and 1x 6.0 Sqmm for Earth wire

M&L fixing PVC Casing caping 20/25 mm on wall/ceiling, including replacement of old u/s PVC cashing caping, for exesting old servicable point wiring for existing old servicable point wiring of 1.5mm /2.5mm /4mm & 6 sqmm, Existing wiring/Submain wiring drawn through new PVC Casing caping/conduit on wall/ceiling, including replacement. (Note:- The rate quoted is deemed to be included for taking down of U/S PVC Casing caping/ conduit including cutting &fixing charges & making good to disturbed surface and matching with existing surfaces)

Supply and fix MCB DB SPN 4 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix MCB DB SPN 12 way double door with metal door suitabl for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directedcomplete all as specified and directed.

Supply and fix MCB DB TPN 4 way with metal door suitable for Provision of incommer and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed.

Supply and fix in replacement MCCB 63 Amp 415 volts 16kA 4 pole complete all as specified and directed.

S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of MCB SP 63 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles, complete all as specified and directed.

S&F in replacement of MCB DP 40 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles, complete all as specified and directed.

S&F in replacement of MCB DP 63 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of isolator DP 40 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of isolator DP 63 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of isolator TPN 40 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of isolator TPN 63 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of isolator TPN 100 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of LED tube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver, including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in replacement of Lienear & compact 9 wat LED mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser including 2/3 core flexible copper wire with flexible pipe ceiling rose to light fittings complete all as specified and directed.

S&F in replacement of environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head LED light fittings 10 watt capacity, comprising of high brightness LEDs, IP54 protection complete with all accessories internally pre-wired and inncluding connecting up with 2/3 core twisted flexible copper conductor cable with suitable size of flexible PVC/steel Conduit complete all as specified and directed.

Supply and fix in replacement 'JUNO' integral post top lantern copper dust painted cast aluminium spigot, spun aluminium canopy with clear acrylic cover with LED lights including all accessories such as Bracket, GI Pipe and prewired complete all as specified and directed.

S&F in replacement of building LED security light fitting 35 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut, bolt, washer etc, complete all as specified and directed.

S&F in replacement of Ultra slim LED panel tube light fitting 36 watt 230 Volt made from extruded aluminium housing frame (recesss/pendant) 2' x2' Complete with all accessories internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in replacement PVC ventilating air fan single phase 250 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.

S&F in replacement of ventilating air fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.

Supply, Laying on replacement, connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable complete all as specified and directed.

Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete all as specified and directed.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed. Note : Punned down thickness shall be considered for measurement .

Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection, complete all as specified and directed.

M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on complete all as specified and directed. Note :- (i) Earthing test must be carried out in presence of Engr-in-Charge. (ii) The earthing result not more than 2 Ohms or disered earth resistance value. (iii) Megger required for testing will be be provided at site by the contractor. (iv) Contractor shall submit earth resistance testing report before submission of bill.

Nand Lal and Sons

BHARAT ELECTRICAL & ELECTRICAL WORKS

Ashis Enterprises

M/S SAI UDYOG

M/s Mukesh and company

Delhi Enterprises

M/S SHAMBHU SHARAN SINGH

M/s Kundu Enterprises

united builders