PROVN OF CERTAIN SANCTION WORKS IN THE AREA OF AGE B/R-I, AGE B/R-II AND AGE E/M UNDER GE ( C) DELHI CANTT-10

Amount

M & L for removal of plants ( area with in n exc 0.50sqm) growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water, including taking out roots from roof / brick work and making good the disturbed surface with plaster and PCC 1 :2:4 type B0 and disposing the rubbish from site (MOD land) of upto G+ 5 storey height complete and as specified

Demolition Bricks tiles (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons, etc. (each layer all as specified and directed.

Demolition Mud in roofs, any thickness, including plastering and lapping (whether full thickness removed or only a part thereof) all as specified and directed.

Removing soil excavated material exc. 1.5Km but n exc 5km and depositing where directed at above the starting point all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) on roof padding surface finished even and smooth without using extra cement complete all as spd & directed.

M&L for rendering 10mm thick on top of roof concrete in cement mortar 1:4 with water proofing compound at the rate of 3% by weight of cement to have a smooth surface for laying of water proofing membrane. Note: Water proofing compound will be measured and paid seprately.

M&L APP based polymeric membrane with mineral granules on top surfaces, minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) over one coat of 85/25 bitumen @ 1.2 Kg/Sqm and paste the membrane with torth method and again apply a coat of 85/25 bitumen @ 1.2 Kg/Sqm at overlapping joints.

S & F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner incl 15 mm thick screed bed in CM 1:4.

Supply only integral water proofing compound (ISI marked).

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. PVC water tanks of exc 250 litres and n.exc 500 litres capacity of any condition or type incl complete all as specified and directed.

Demolition of brick work built in cement mortar in any description and position, upto G+5 storey bldg complete all as specified..

Brick work with old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), upto G+5 storey bldg complete all as specified.

All as per serial item No 12 but except bricks, all as specified. (Servicable bricks retrieved from Serial Item No 11 shall be used).upto G+5 storey bldg complete all as specified.

Taking down cement plaster in any thickness from brick or stone etc including raking out joints, hacking for key, scrubbing down with water etc upto G+5 storey bldg complete all as specified.

Rendering 15mm thick in cement mortar 1:4, on fair faces of brick work or concrete surfaces, surface finished even and smooth without using extra cement

M&L for Newly plastered or unplastered wall surface and apply 2mm thick wall care putty for smooth surface and applying two coats of weather coat/apex paint on walls/ceilings complete all as specified and directed.

M & L Providing, cement concrete in kerbs, coping to top of wall, rounded or chamfered on edges type C 0 1:3:6 (12.5mm graded stone aggegate) including demolition complete all as specified and as directed

Taking up or down 20 mm GI tubing medium grade with all fittings and connections incl cleaning for refixing or removal to store complete all as specified.

All as per item no.18 here-in-before but dia of GI pipe is 15mm.

S&F 20mm dia GI tubing medium grade with all fittings and connections fixed to wall or ceiling or laid on floor etc complete all as specified an directed.

All as per item no.21 here-in-before but dia of GI pipe is 15mm.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified.

Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in foundations, filling and mass concrete complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; channel pickets, pivoted flat bars, rolled up or down an inclined track by pinion and sliding on track, iron handles etc., as specified, erected in position and securing runners with holdfasts and brackets framework of water tanks, roof truss and similar work con- forming to Fe.290.Gde-E-165

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete, all as specified and directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

Supply and fixing High-pressure Laminate (HPL) sheet 6 to 8 mm thickness HPL touch wood any colour interior or exterior as in roof covering/cladding to wall, gate etc fixed with self tapping screws with fitting and fixtures complete all as spd and directed by engr-in-charge.

M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel concealed in walls, with modular sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, all as specified and as directed.

One light/fan/bell point controlled by one by one way switch ( switch to be measured and paid separtely)

M&L switch Modular type 6 Amp SP one way ISI marked complete all as specified

M&L ceiling rose 3 phase PVC polycorbonate,isolated body.

S&F BLDC Ceiling fan three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper winding in fan,copper cable pvc insulated of suitable length, complete all as directed. Note BLDC Fan should work on existing electronic fan regulator & also with remote controled.

Schedule of Credit

J S CONSTRUCTION CO (BID ID -3376919)

M/S MSD & Associate (BID ID -3378877)

M/s M M BAHL (BID ID -3378720)