PROVN OF 500 LPH RO PLANT IN SHIPS P-4A AT INS AGRANI COIMBATORE

Amount

Supply,fixing,testing and commissioing of RO plant 500 ltr's capcity with the following accessories:-

Spiral wound type RO module made off thin film composit 500 LPH permeate flow alongwith pressure tube made off FRP 12kg/cm2 presure rate and incl suitable size memberen - 03 No's

Pressure Sand filter/Carbon flter - Vertical type made of FRP with Multi Port Valve with 3.5 kg/cm2 working pressure, Dual media filter by using of sand pebbles and Activated carbon as a filter media ,flowrate 1.5 m3/hr - 01 No's

Supply and fixing testing,commissioing of Centrifugal pump set 1 HP single phase 30 Mtr head and 1500 LPH - 01 No's

Supply and fixing testing,commissioing of High pressure Multistage vertial type Pump 4 HP three phase type and 25 LPM - 01 No's

Supply and fixing testing,commissioing of Chemical Dosing pump single phase 60 watts 6 LPH - 01 No's

Supply and fixing Micron filter of flow rate 1.5 m3/hr of size 20" Poly propylene incl 5 Micron rating filters - 02 No's

Supply and fixing Antiscalant Holding Cum preparation tank vertical type HDPE tank 30 Ltr's capacity with initial filling of antiscalent chemical - 01 Job

Supply and fixing of panel board with inbuilt starter and two flow meters and one pressure gauge the panel board made out of 3 mm thick GI sheet with powder coated

M&L Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to all fittings and fixed complete to walls and ceiling or laid in floors of size 25 mm dia

M&L Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fied to dia 25 mm bore pipe

M&L Rotatial moulded water polyethiline water storage tank (clindrical) vertical with closed top hoisted and fixed in postion all as specified in SSR part -I of capacity's 2000 Ltr's

M&L Rotatial moulded water polyethiline water storage tank (clindrical) vertical with closed top hoisted and fixed in postion all as specified in SSR part -I of capacity's 1000 Ltr's

S&F Nipple suitable for HDPE water tank suitable for 25 mm bore pipe

S&F 25mm bore dia ball valves high pressure, with polythene float and flynut complete, Screwed for iron pipe or brass ferrule and fixed

S&F Bib taps, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore

Brick work with sub class 'B' bricks straight of curved on plan exc 6 m mean radius built in cement mortar 1:6

M&L Rendering 15 mm thick cement plaster 1:6 on fair places of brick work and concrete surface rendering smooth (w/o using extra cement)

Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminiumstranded conductor 1100 volts grade cross section area 10 sq mm 4 core Note : Earth will be connected with existing eath pit

M&L for sand filling ,fine river sand in terches for under ground cable all as specified and directed.

M&L brick subclass 'B' as protection toU.G cable old size laid dry flat adjoinig each other all as specified and as directed.

M&L tubes light grade galvanised with all fittings laid in trench of sizes 50 mm for protection of cable

Excavation intrenches in hard / densile soil not exceeding 1.5 mtr vidse and not exc 1.5 mtr in depth for laying of pipe line and getting out complete.

Returning filling in approved earth incl spreading leveling watering and welln ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated materials (surplus soil) to a distance exc. 50m and depositing where directed at a level n.exc 1.5 m above the starting point all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Preparation of new steel surface and applying two coats of synthetic enamel paint over one coat of red oxide

M&L Cement concrete type B-1, 1:2:4 (20mm graded aggregate), 40mm thick as in flooring, finishing even and smooth without using extra cement.

M&L Cement concrete Type B2 1:2:4 (40 mm graded aggregate) in foundations, filling and mass concrete

S&F roof /trusses(framed)trussed purelines , crane gantries, rails and fastenenings and heavy brackframing ( Beam tee, amgles , channels or flates section)including distance piece cleats etc of Fe 410--W (Gde-E-250) Quality A.

S&F plates (plain or chequered) channels square cut notched (ordinary and counter sunk) forming holes with riveted boltd or welded attachment of Fe 410--W (Gde-E-250) Quality A.

joepowercorporation

KUMAR AGENCIES